BTS71202EPGXUMA1 vs BTS51202EKAXUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS71202EPGXUMA1 द्वारा Infineon और BTS51202EKAXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS71202EPGXUMA1 BTS71202EPGXUMA1 - 2-Ch 2A Smart High-Side Switch | Infineon

BTS71202EPGXUMA1 - 2-Ch 2A Smart High-Side Switch | Infineon

BTS71202EPGXUMA1 ✓ सक्रिय
Infineon
BTS51202EKAXUMA1 BTS51202EKAXUMA1 - 120 mΩ Dual Smart High-Side Switch | Infineon

BTS51202EKAXUMA1 - 120 mΩ Dual Smart High-Side Switch | Infineon

BTS51202EKAXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS71202EPGXUMA1 BTS51202EKAXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch (PROFET +12V) —
Number of Channels 2 (independent) 2
टोपोलॉजी High-side N-channel MOSFET with charge pump Dual High-Side Switch (2 channels)
Continuous Load Current per Channel 2 A —
On-Resistance (Rds(on)) 110 mΩ typical —
Operating Voltage (Vbb) 3.1 V to 28 V 8 V to 18 V
Logic Input Voltage (IN) Active high, CMOS-compatible —
Standby Current [DATA_NEEDED: standby current value] —
Current Sense Output (IS) Analog proportional to load current —
Over-Temperature Protection Yes (thermal shutdown with auto-restart) —
Over-Voltage Protection (Vbb clamp) Yes (load-dump tolerant) —
Reverse Battery Protection Yes (–16 V rated via integrated path) —
Short-Circuit Protection Yes (current-limit, latching/off behaviour per mode) —
Inductive Load Clamping Yes (built-in active clamp) —
ऑपरेटिंग तापमान रेंज -40 °C to +150 °C junction —
पैकेज PG-TSDSO-14 (exposed pad) PG-DSO-14-40-EP (14-pin SOIC with exposed pad)
माउंटिंग प्रकार Surface Mount Surface Mount
AEC-Q100 Qualification Yes —
RoHS Compliance Compliant (lead-free) —
Technology — Smart6 (N-channel vertical MOSFET with charge pump)
On-State Resistance (RDS(on)) — 120 mΩ (typical per channel)
Continuous Output Current — 2 A per channel (typical 2.5 A)
Load Type — Lamps up to 1×10 W, LEDs, resistive/inductive loads
ऑपरेटिंग तापमान — -40 °C to +150 °C
Maximum Power Dissipation — 1800 mW
Integrated Protection — Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery
Diagnostic Output — Yes (status feedback pin)
Charge Pump — Integrated
Automotive Qualified — Yes
RoHS स्थिति — Compliant

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध