MPX2010DP vs MPXC2011DT1 तुलना

विस्तृत दोनों ओर की तुलना MPX2010DP द्वारा NXP Semiconductors और MPXC2011DT1 द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

NXP Semiconductors
MPX2010DP MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP ✓ सक्रिय
NXP Semiconductors
MPXC2011DT1 MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP

MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP

MPXC2011DT1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर MPX2010DP MPXC2011DT1
ब्रांड NXP Semiconductors NXP Semiconductors
श्रेणी Pressure Sensors Pressure Sensors
लाइफसाइकिल स्थिति सक्रिय सक्रिय
सेंसर प्रकार Differential Pressure Sensor —
Pressure Range 0 to 10 kPa (0 to 1.45 PSI) —
Technology Piezoresistive (silicon strain gauge bridge) Piezoresistive silicon strain gauge
आउटपुट प्रकार Analog voltage, Wheatstone bridge (mV level) Analog Wheatstone bridge (ratiometric)
Typical Full-Scale Span 25 mV at 10 V excitation —
Zero Pressure Offset 0 mV nominally (±1.0 mV max) —
सप्लाई वोल्टेज 10 V DC typical (max 16 V) —
Linearity ±0.05% (typ) —
Temperature Compensation 0 °C to +85 °C (on-chip) —
ऑपरेटिंग तापमान -40 °C to +125 °C 0 °C to +85 °C
Response Time 1.0 ms (typical) —
Maximum Overpressure 75 kPa —
Burst Pressure 200 kPa —
Port Configuration Dual ports (differential), 0.19 inch / 4.93 mm tubes —
Package / Mounting 4-SIP Module (through-hole with axial tubes) —
Media Compatibility Dry air or non-corrosive gas —
RoHS स्थिति Compliant [DATA_NEEDED: RoHS status not in web data]
Pressure Type — Differential
Operating Pressure Range — 0 kPa to 10 kPa (0 PSI to 1.45 PSI)
Full-Scale Output — 25 mV typical at 10 V excitation
Sensitivity — 2.5 mV/kPa typical
Excitation Voltage — 3 V DC to 10 V DC (10 V nominal)
पैकेज — 4-SSIP Chip Pak module, side port
Port Style — Female, 3.25 mm (0.128 in) barbed side port
Termination Style — Through-hole PCB, 4 leads
Compensation — On-chip temperature compensated and calibrated
Module Dimensions — 7.6 mm x 12.8 mm nominal
माउंटिंग प्रकार — Through-hole (PCB mount with side-port tubing)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध