MPX2010DP vs MPXC2011DT1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MPX2010DP sa pamamagitan ng NXP Semiconductors at MPXC2011DT1 sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
NXP Semiconductors
MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro
MPX2010DP ✓ NakahandaNXP Semiconductors
MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP
MPXC2011DT1 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MPX2010DP | MPXC2011DT1 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Kategorya | Pressure Sensors | Pressure Sensors |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Type ng Sensor | Differential Pressure Sensor | — |
| Pressure Range | 0 to 10 kPa (0 to 1.45 PSI) | — |
| Technology | Piezoresistive (silicon strain gauge bridge) | Piezoresistive silicon strain gauge |
| Type ng Output | Analog voltage, Wheatstone bridge (mV level) | Analog Wheatstone bridge (ratiometric) |
| Typical Full-Scale Span | 25 mV at 10 V excitation | — |
| Zero Pressure Offset | 0 mV nominally (±1.0 mV max) | — |
| Volte ng Pagbibigay | 10 V DC typical (max 16 V) | — |
| Linearity | ±0.05% (typ) | — |
| Temperature Compensation | 0 °C to +85 °C (on-chip) | — |
| Temperature na Operasyon | -40 °C to +125 °C | 0 °C to +85 °C |
| Response Time | 1.0 ms (typical) | — |
| Maximum Overpressure | 75 kPa | — |
| Burst Pressure | 200 kPa | — |
| Port Configuration | Dual ports (differential), 0.19 inch / 4.93 mm tubes | — |
| Package / Mounting | 4-SIP Module (through-hole with axial tubes) | — |
| Media Compatibility | Dry air or non-corrosive gas | — |
| Tindminan RoHS | Compliant | [DATA_NEEDED: RoHS status not in web data] |
| Pressure Type | — | Differential |
| Operating Pressure Range | — | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Full-Scale Output | — | 25 mV typical at 10 V excitation |
| Sensitivity | — | 2.5 mV/kPa typical |
| Excitation Voltage | — | 3 V DC to 10 V DC (10 V nominal) |
| Packhaging | — | 4-SSIP Chip Pak module, side port |
| Port Style | — | Female, 3.25 mm (0.128 in) barbed side port |
| Termination Style | — | Through-hole PCB, 4 leads |
| Compensation | — | On-chip temperature compensated and calibrated |
| Module Dimensions | — | 7.6 mm x 12.8 mm nominal |
| Uri ng Pagpapasok | — | Through-hole (PCB mount with side-port tubing) |