BTH60702EPVXUMA1 vs BTS70402EPGXUMA1 Perbandingan
Perbandingan bersamaan detil BTH60702EPVXUMA1 dari Infineon dan BTS70402EPGXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BTH60702EPVXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Family | PROFET + 48V | — |
| Fungsi | Smart high-side power switch (dual channel, 2 x 1:1) | Smart High-Side Power Switch |
| On-State Resistance (typ.) | 60 mΩ per channel | — |
| Continuous Load Current (per channel) | 1.7 A | — |
| Number of Channels | 2 | 4 |
| Configuration | 2 x 1:1 (dual independent high-side) | — |
| Tipe Transistor | N-channel vertical power MOSFET with charge pump | — |
| Nominal Operating Voltage | 48 V board net | — |
| Maximum Supply Voltage | 54 V | — |
| Load Voltage Range | [DATA_NEEDED: load voltage range] | — |
| Current Sense / Diagnosis | Yes (analog current-sense output) | — |
| Protection Features | Over-load, short-circuit, over-voltage, reverse battery, thermal shutdown | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Paket | PG-TSDSO-14 with exposed pad | PG-TSDSO-14 (exposed thermal pad) |
| Operating Temperature (junction) | -40 °C to +150 °C (automotive grade) | — |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | [DATA_NEEDED: MSL level] | — |
| Status RoHS | Compliant | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Konfigurasi Output | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| Rentang Suhu Kerja | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |