BTH60702EPVXUMA1 vs BTS70402EPGXUMA1 比較

詳細並排比較 BTH60702EPVXUMA1 由 Infineon 與 BTS70402EPGXUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Infineon
BTH60702EPVXUMA1 BTH60702EPVXUMA1 - 60 mΩ Dual High-Side Switch 1.7A | Infineon

BTH60702EPVXUMA1 - 60 mΩ Dual High-Side Switch 1.7A | Infineon

BTH60702EPVXUMA1 ✓ 啟用中
Infineon
BTS70402EPGXUMA1 BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 ✓ 啟用中

規格比較

參數 BTH60702EPVXUMA1 BTS70402EPGXUMA1
品牌 Infineon Infineon
類別 Power MOSFET Drivers Power MOSFET Drivers
生命週期狀態 啟用中 啟用中
Manufacturer Infineon Technologies Infineon Technologies
Product Family PROFET + 48V —
功能 Smart high-side power switch (dual channel, 2 x 1:1) Smart High-Side Power Switch
On-State Resistance (typ.) 60 mΩ per channel —
Continuous Load Current (per channel) 1.7 A —
Number of Channels 2 4
Configuration 2 x 1:1 (dual independent high-side) —
電晶體類型 N-channel vertical power MOSFET with charge pump —
Nominal Operating Voltage 48 V board net —
Maximum Supply Voltage 54 V —
Load Voltage Range [DATA_NEEDED: load voltage range] —
Current Sense / Diagnosis Yes (analog current-sense output) —
Protection Features Over-load, short-circuit, over-voltage, reverse battery, thermal shutdown Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
封裝 PG-TSDSO-14 with exposed pad PG-TSDSO-14 (exposed thermal pad)
Operating Temperature (junction) -40 °C to +150 °C (automotive grade) —
安裝類型 Surface Mount Surface Mount
MSL 等級 [DATA_NEEDED: MSL level] —
RoHS 狀態 Compliant —
Part Family — PROFET+2 (BTS70xxx series)
輸出配置 — High-side, N-channel MOSFET
Continuous Load Current per Channel — 3.5 A (typical)
On-State Resistance (Ron) per Channel — 65 mOhm typical
Operating Voltage Range — 6 V to 18 V nominal (load-dump tolerant to 40 V)
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Diagnostic Interface — SPI status register, current-sense feedback
工作溫度範圍 — -40 °C to +150 °C junction
AEC-Q100 Qualification — Qualified (automotive grade)
RoHS Compliance — Compliant

資料表與資源

瀏覽所有產品 建立 BOM 索取報價