BTH60702EPVXUMA1 vs BTS70402EPGXUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTH60702EPVXUMA1 tarafından Infineon ve BTS70402EPGXUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | BTH60702EPVXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Family | PROFET + 48V | — |
| Fonksiyon | Smart high-side power switch (dual channel, 2 x 1:1) | Smart High-Side Power Switch |
| On-State Resistance (typ.) | 60 mΩ per channel | — |
| Continuous Load Current (per channel) | 1.7 A | — |
| Number of Channels | 2 | 4 |
| Configuration | 2 x 1:1 (dual independent high-side) | — |
| Transistor Türü | N-channel vertical power MOSFET with charge pump | — |
| Nominal Operating Voltage | 48 V board net | — |
| Maximum Supply Voltage | 54 V | — |
| Load Voltage Range | [DATA_NEEDED: load voltage range] | — |
| Current Sense / Diagnosis | Yes (analog current-sense output) | — |
| Protection Features | Over-load, short-circuit, over-voltage, reverse battery, thermal shutdown | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Paket | PG-TSDSO-14 with exposed pad | PG-TSDSO-14 (exposed thermal pad) |
| Operating Temperature (junction) | -40 °C to +150 °C (automotive grade) | — |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | [DATA_NEEDED: MSL level] | — |
| RoHS Durumu | Compliant | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Çıkış Konfigürasyonu | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| İşletim Sıcaklığı Aralığı | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |