MC9S12DJ256MPVE vs MC9S12DT256MPVE Perbandingan
Perbandingan bersamaan detil MC9S12DJ256MPVE dari NXP Semiconductors dan MC9S12DT256MPVE dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MC9S12DJ256MPVE - HCS12 16-Bit MCU 256KB Flash | NXP | Automotive
MC9S12DJ256MPVE NrndNXP Semiconductors
MC9S12DT256MPVE - 16-bit HCS12 MCU, 256KB Flash, 112-LQFP | NXP
MC9S12DT256MPVE NrndPerbandingan Spesifikasi
| Parameter Umum | MC9S12DJ256MPVE | MC9S12DT256MPVE |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Microcontrollers | Microcontrollers |
| Status Lingkungan Hidup | NRND | NRND |
| Core Architecture | HCS12 (16-bit CISC) | — |
| CPU Bit Width | 16-bit | — |
| Maximum CPU Frequency | 25 MHz (some sources cite 50 MHz bus) | 25 MHz |
| Program Flash | 256 KB (256K x 8) | — |
| RAM | 12 KB | 12 KB |
| EEPROM | 4 KB | 4 KB |
| Tegangan Pemuat | 2.35 V to 2.75 V core; 5 V typical with on-chip regulator | 2.35 V to 2.75 V (regulated core) |
| I/O Pins | 59 (some package variants expose 91) | 91 |
| ADC | Two 8-channel, 10-bit | 2 x 10-bit, 8 channels each (16 channels total) |
| PWM Channels | 8-channel | — |
| Enhanced Capture Timer | 8-channel IC/OC | — |
| SCI (UART) Modules | 2 asynchronous | — |
| CAN Module | 1 x CAN 2.0 (per family datasheet) | — |
| SPI Module | 1 synchronous serial (per family) | — |
| Suhu Kerja | -40C to +125C (automotive AEC-Q100 grade) | -40C to +125C (automotive grade) |
| Paket | 112-LQFP (20x20 mm), gull-wing | 112-LQFP (20x20 mm) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Status RoHS | Compliant (lead-free matte-tin finish) | Compliant |
| Moisture Sensitivity Level | MSL 3 (per JEDEC J-STD-020) | — |
| Background Debug Mode | Yes (BDM) | — |
| Status Lingkungan Hidup | NRND (Not Recommended for New Designs) | NRND (Not Recommended for New Designs) |
| Core | — | HCS12 (16-bit CISC) |
| Program Memory (Flash) | — | 256 KB |
| Lebar Bus Data | — | 16-bit |
| Timers | — | 8-channel Enhanced Capture Timer (ECT) |
| Communication Interfaces | — | 2 x SCI (UART), 2 x SPI, 1 x I2C, 1 x CAN (MSCAN 2.0A/B) |
| Debug Interface | — | Background Debug Mode (BDM) + JTAG |