MPVZ5010G7U vs MPXV5010GC7U Perbandingan

Perbandingan bersamaan detil MPVZ5010G7U dari NXP Semiconductors dan MPXV5010GC7U dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

NXP Semiconductors
MPVZ5010G7U MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP

MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP

MPVZ5010G7U ✓ Aktif
NXP Semiconductors
MPXV5010GC7U MPXV5010GC7U - 0-10kPa Differential Pressure Sensor | NXP

MPXV5010GC7U - 0-10kPa Differential Pressure Sensor | NXP

MPXV5010GC7U ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum MPVZ5010G7U MPXV5010GC7U
Merek NXP Semiconductors NXP Semiconductors
Kategori Pressure Sensors Pressure Sensors
Status Lingkungan Hidup Aktif Aktif
Pressure Type Vented Gauge Differential / Gauge
Operating Pressure Range 0 kPa to 10 kPa (0 to 1.45 PSI) 0 kPa to 10 kPa
Supply Voltage (Vcc) 4.75 V to 5.25 V (5 V typical) —
Arus Pemuat 10 mA (maximum) —
Analog Output Range 0.2 V to 4.7 V —
Accuracy ±1.5 %FS (0 °C to 85 °C) —
Tipe Output Analog, ratiometric to Vcc Analog (ratiometric to VCC)
Response Time [DATA_NEEDED: response time ms] [DATA_NEEDED: response time in ms]
Rentang Suhu Kerja 0 °C to +85 °C 0 °C to +85 °C
Compensated Temperature Range -10 °C to +60 °C —
Storage Temperature Range -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] -30 °C to +100 °C
Paket 8-DIP Module (Case 1368-01, through-hole) —
Tipe Mounting Through-Hole (DIP module with vent tube) Surface Mount
Sensor Technology Piezoresistive silicon micromachined —
Signal Conditioning On-chip, temperature compensated, calibrated —
Level MSL [DATA_NEEDED: MSL rating] —
Status RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance]
Body Height 5.46 mm —
Maximum Overpressure — [DATA_NEEDED: maximum overpressure rating in kPa]
Tegangan Pemuat — 4.75 V to 5.25 V (typ. 5.0 V)
Full-Scale Output (typ. @10 kPa) — 4.5 V
Zero-Pressure Offset — 0.2 V to 0.85 V
Supply Current (typ.) — [DATA_NEEDED: supply current in mA]
Output Impedance — < 50 ohm
Accuracy (typ.) — ±5 % of V_FSS (0-85 °C)
Paket / Case — SOP-8 (Case 1737), Surface Mount
Port Configuration — Dual axial horizontal ports (gauge)
Media Compatibility — Non-corrosive, non-ionic media (dry air, dry gases)

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon