MPVZ5010G7U vs MPXV5010GC7U 比較
詳細並排比較 MPVZ5010G7U 由 NXP Semiconductors 與 MPXV5010GC7U 由 NXP Semiconductors. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | MPVZ5010G7U | MPXV5010GC7U |
|---|---|---|
| 品牌 | NXP Semiconductors | NXP Semiconductors |
| 類別 | Pressure Sensors | Pressure Sensors |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Pressure Type | Vented Gauge | Differential / Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V (5 V typical) | — |
| 供應電流 | 10 mA (maximum) | — |
| Analog Output Range | 0.2 V to 4.7 V | — |
| Accuracy | ±1.5 %FS (0 °C to 85 °C) | — |
| 輸出類型 | Analog, ratiometric to Vcc | Analog (ratiometric to VCC) |
| Response Time | [DATA_NEEDED: response time ms] | [DATA_NEEDED: response time in ms] |
| 工作溫度範圍 | 0 °C to +85 °C | 0 °C to +85 °C |
| Compensated Temperature Range | -10 °C to +60 °C | — |
| Storage Temperature Range | -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] | -30 °C to +100 °C |
| 封裝 | 8-DIP Module (Case 1368-01, through-hole) | — |
| 安裝類型 | Through-Hole (DIP module with vent tube) | Surface Mount |
| Sensor Technology | Piezoresistive silicon micromachined | — |
| Signal Conditioning | On-chip, temperature compensated, calibrated | — |
| MSL 等級 | [DATA_NEEDED: MSL rating] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Body Height | 5.46 mm | — |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating in kPa] |
| 供應電壓 | — | 4.75 V to 5.25 V (typ. 5.0 V) |
| Full-Scale Output (typ. @10 kPa) | — | 4.5 V |
| Zero-Pressure Offset | — | 0.2 V to 0.85 V |
| Supply Current (typ.) | — | [DATA_NEEDED: supply current in mA] |
| Output Impedance | — | < 50 ohm |
| Accuracy (typ.) | — | ±5 % of V_FSS (0-85 °C) |
| 封裝 / 外殼 | — | SOP-8 (Case 1737), Surface Mount |
| Port Configuration | — | Dual axial horizontal ports (gauge) |
| Media Compatibility | — | Non-corrosive, non-ionic media (dry air, dry gases) |