MPXH6115AC6U vs MPXHZ6115A6T1 Perbandingan
Perbandingan bersamaan detil MPXH6115AC6U dari NXP Semiconductors dan MPXHZ6115A6T1 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC
MPXH6115AC6U ✓ AktifNXP Semiconductors
MPXHZ6115A6T1 - 15-115 kPa Absolute Pressure Sensor | NXP | 8-SOIC
MPXHZ6115A6T1 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MPXH6115AC6U | MPXHZ6115A6T1 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Rentang Tegangan Output | 0.2 V to 4.7 V (at 5 V supply) | 0.2 V to 4.7 V (at 5 V supply) |
| Tegangan Pemuat | 4.75 V to 5.25 V (5 V typical) | 5 V (typical, [DATA_NEEDED: full min/max range]) |
| Sensitivity | 45.9 mV/kPa (typical) | — |
| Paket | 8-SOIC (0.335 inch, 8.50 mm width) Top Port | 8-SOIC (0.295", 7.50 mm Width), Surface Mount |
| Port Type | Male - 0.13 inch (3.3 mm) Tube, Top | — |
| Rentang Suhu Kerja | -40 C to +125 C | -40 °C to +125 °C |
| Compensated Temperature Range | 0 C to +85 C | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Tipe Output | Analog, ratiometric to VCC | Analog Voltage |
| Tipe Mounting | Surface Mount | Surface Mount (PPS thermoplastic) |
| Technology | Piezoresistive MEMS, monolithic silicon | — |
| Port Orientation | Top-side vertical | — |
| Level MSL | [DATA_NEEDED: MSL rating] | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Maximum Overpressure | — | 400 kPa (58.02 PSI) |
| Accuracy | — | ±1.5% (0 °C to 85 °C) |
| Temperature Compensation Range | — | -40 °C to +125 °C |
| Port Style | — | No Port (media-resistant PPS surface mount) |
| Sensor Technology | — | MEMS silicon strain-gauge with bipolar op-amp signal conditioning |
| Media Compatibility | — | Media-resistant PPS package; dry gas media recommended |