MPXH6115AC6U vs MPXHZ6115A6T1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MPXH6115AC6U disebabkan oleh NXP Semiconductors dan MPXHZ6115A6T1 disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
NXP Semiconductors
MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC
MPXH6115AC6U ✓ AktifNXP Semiconductors
MPXHZ6115A6T1 - 15-115 kPa Absolute Pressure Sensor | NXP | 8-SOIC
MPXHZ6115A6T1 ✓ AktifPengandingan Spesifikasi
| Parametr | MPXH6115AC6U | MPXHZ6115A6T1 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Gambaran Tegangan Output | 0.2 V to 4.7 V (at 5 V supply) | 0.2 V to 4.7 V (at 5 V supply) |
| Tegangan Pemberi Arus | 4.75 V to 5.25 V (5 V typical) | 5 V (typical, [DATA_NEEDED: full min/max range]) |
| Sensitivity | 45.9 mV/kPa (typical) | — |
| Kemasan | 8-SOIC (0.335 inch, 8.50 mm width) Top Port | 8-SOIC (0.295", 7.50 mm Width), Surface Mount |
| Port Type | Male - 0.13 inch (3.3 mm) Tube, Top | — |
| Gambaran Suhu Operasi | -40 C to +125 C | -40 °C to +125 °C |
| Compensated Temperature Range | 0 C to +85 C | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Jenis Output | Analog, ratiometric to VCC | Analog Voltage |
| Jenis Pemasangan | Surface Mount | Surface Mount (PPS thermoplastic) |
| Technology | Piezoresistive MEMS, monolithic silicon | — |
| Port Orientation | Top-side vertical | — |
| Aras MSL | [DATA_NEEDED: MSL rating] | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Maximum Overpressure | — | 400 kPa (58.02 PSI) |
| Accuracy | — | ±1.5% (0 °C to 85 °C) |
| Temperature Compensation Range | — | -40 °C to +125 °C |
| Port Style | — | No Port (media-resistant PPS surface mount) |
| Sensor Technology | — | MEMS silicon strain-gauge with bipolar op-amp signal conditioning |
| Media Compatibility | — | Media-resistant PPS package; dry gas media recommended |