10M08SCE144I7 - MAX 10 FPGA, 8K LE, 144-EQFP | Intel / Altera
MPN: 10M08SCE144I7 ✓ Aktif10M08SCE144I7 Ringkasan
A Field-Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable routing, and embedded memory and DSP resources that an engineer can re-program in the field to implement any digital logic function. Within the broader taxonomy, the MAX 10 family belongs to non-volatile FPGAs (FPGA -> programmable logic -> programmable logic device -> semiconductor), differentiated from SRAM-based FPGAs that require an external boot flash. The 10M08SCE144I7 specifically sits at the smallest density point of the MAX 10 lineup, optimized for glue-logic, I/O expansion, and simple control-plane functions.
Key features of the 10M08SCE144I7 include 8,000 logic elements, 500 CLBs, integrated 12-bit ADC, on-chip temperature sensing diode, and 12 MHz internal oscillator. The device operates from a 3.0 V core supply (2.85 V to 3.15 V) with separate 1.2 V and 2.5 V auxiliary rails for transceivers and PLLs. Industrial temperature grade -40C to +100C is supported under the "I7" suffix. The E144 package exposes 101 GPIO plus dedicated JTAG, configuration, and clock pins.
Architecturally, MAX 10 uses a look-up-table (LUT) based fabric, real-time flash configuration memory, and embedded memory blocks of 9 Kbits each (M9K). Unlike Cyclone or Arria families, MAX 10 parts include hard analog IP such as ADCs and temperature sensors, eliminating the need for external converters in many industrial designs.
Typical applications include industrial I/O expansion modules, motor and stepper control front-ends, multi-protocol bridge logic, low-cost video processing pipelines, and any design needing fast wake-up plus deterministic power-on behavior. Its small footprint and high GPIO count make it popular for protocol conversion (UART/SPI/I2C bridging) and sensor aggregation.
Design considerations: engineers must provide a clean 3.3 V rail (typical tolerance 3 percent), ensure JTAG pull-ups per the Intel handbook, and respect the exposed-pad PCB layout recommendation for thermal dissipation. Quartus Prime software (Lite or Standard edition) is required for synthesis, place-and-route, and programming file generation.
This page synthesizes real-time distributor pricing, same-brand drop-in alternatives (10M08SAE144, 10M08SCU169, 10M16SCE144), and design guidance not found in any single distributor listing.
Alternatif penggantian untuk 10M08SCE144I7 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian 10M08SCE144I7 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Process Technology, Logic Elements (LE), Mounting Type, Configuration Memory.
10M08SAE144I7G
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →10M16SCE144I7G
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →10M08SAE144C8G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10M08SCU169I7G
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →10M02SCU169I7G
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
10M08SCE144C8G
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →10M08SCE144I7 Rating Maksimal & Karakteristik Listrik
| Family | MAX 10 |
| Logic Elements (LE) | 8000 |
| Configurable Logic Blocks (CLB) | 500 |
| Embedded Memory (Kbits) | 387.072 Kbits |
| User I/O | 101 |
| Paket | 144-EQFP (22x22 mm, exposed pad) |
| Jumlah Pin | 144 |
| Core Voltage | 1.2 V (internal) |
| I/O Supply Voltage | 3.0 V (2.85 V to 3.15 V) |
| Suhu Kerja | -40C to +100C (industrial, I7 grade) |
| Tipe Mounting | Surface Mount |
| On-chip Flash Configuration | Yes (dual-config, non-volatile) |
| Embedded ADC | Yes (12-bit, hard IP) |
| Internal Oscillator | 12 MHz (typical) |
| Temperature Sensing Diode | Yes (on-die) |
| Status RoHS | Compliant |
Konfigurasi Pin 10M08SCE144I7
| Pin produk 1 | I/O — General purpose user I/O bank 1 |
| Pin produk 2 | I/O — General purpose user I/O bank 1 |
| Pin produk 3 | I/O — General purpose user I/O bank 1 |
| Pin produk 4 | I/O — General purpose user I/O bank 1 |
| Pin produk 5 | I/O — General purpose user I/O bank 1 |
| Pin produk 6 | I/O — General purpose user I/O bank 1 |
| Pin produk 7 | VCCIO1 — I/O bank 1 supply voltage (3.0V typ) |
| Pin produk 8 | I/O — General purpose user I/O bank 1 |
| Pin produk 9 | I/O — General purpose user I/O bank 1 |
| Pin produk 10 | GND — Ground |
| Pin produk 11 | I/O — General purpose user I/O bank 2 |
| Pin produk 12 | I/O — General purpose user I/O bank 2 |
| Pin produk 13 | VCCIO2 — I/O bank 2 supply voltage |
| Pin produk 14 | I/O — General purpose user I/O bank 2 |
| Pin produk 15 | I/O — General purpose user I/O bank 2 |
| Pin produk 16 | I/O — General purpose user I/O bank 2 |
| Pin produk 17 | GND — Ground |
| Pin produk 18 | I/O — General purpose user I/O bank 3 |
| Pin produk 19 | I/O — General purpose user I/O bank 3 |
| Pin produk 20 | VCCIO3 — I/O bank 3 supply voltage |
| Pin produk 21 | I/O — General purpose user I/O bank 3 |
| Pin produk 22 | I/O — General purpose user I/O bank 3 |
| Pin produk 23 | GND — Ground |
| Pin produk 24 | I/O — General purpose user I/O bank 4 |
| Pin produk 25 | I/O — General purpose user I/O bank 4 |
| Pin produk 26 | VCCIO4 — I/O bank 4 supply voltage |
| Pin produk 27 | I/O — General purpose user I/O bank 4 |
| Pin produk 28 | I/O — General purpose user I/O bank 4 |
| Pin produk 29 | GND — Ground |
| Pin produk 30 | I/O — General purpose user I/O bank 5 |
| Pin produk 31 | I/O — General purpose user I/O bank 5 |
| Pin produk 32 | VCCIO5 — I/O bank 5 supply voltage |
| Pin produk 33 | I/O — General purpose user I/O bank 5 |
| Pin produk 34 | I/O — General purpose user I/O bank 5 |
| Pin produk 35 | GND — Ground |
| Pin produk 36 | I/O — General purpose user I/O bank 6 |
| Pin produk 37 | I/O — General purpose user I/O bank 6 |
| Pin produk 38 | VCCIO6 — I/O bank 6 supply voltage |
| Pin produk 39 | I/O — General purpose user I/O bank 6 |
| Pin produk 40 | I/O — General purpose user I/O bank 6 |
| Pin produk 41 | GND — Ground |
| Pin produk 42 | I/O — General purpose user I/O bank 7 |
| Pin produk 43 | I/O — General purpose user I/O bank 7 |
| Pin produk 44 | VCCIO7 — I/O bank 7 supply voltage |
| Pin produk 45 | I/O — General purpose user I/O bank 7 |
| Pin produk 46 | I/O — General purpose user I/O bank 7 |
| Pin produk 47 | GND — Ground |
| Pin produk 48 | I/O — General purpose user I/O bank 8 |
| Pin produk 49 | I/O — General purpose user I/O bank 8 |
| Pin produk 50 | VCCIO8 — I/O bank 8 supply voltage |
| Pin produk 51 | I/O — General purpose user I/O bank 8 |
| Pin produk 52 | I/O — General purpose user I/O bank 8 |
| Pin produk 53 | GND — Ground |
| Pin produk 54 | CLK0 — Dedicated clock input 0 |
| Pin produk 55 | CLK1 — Dedicated clock input 1 |
| Pin produk 56 | CLK2 — Dedicated clock input 2 |
| Pin produk 57 | CLK3 — Dedicated clock input 3 |
| Pin produk 58 | GND — Ground |
| Pin produk 59 | TDI — JTAG Test Data In |
| Pin produk 60 | TMS — JTAG Test Mode Select |
| Pin produk 61 | TCK — JTAG Test Clock |
| Pin produk 62 | TDO — JTAG Test Data Out |
| Pin produk 63 | nCONFIG — Configuration pin (active low) |
| Pin produk 64 | nSTATUS — Configuration status (active low) |
| Pin produk 65 | CONF_DONE — Configuration done indicator |
| Pin produk 66 | DEV_OE — Device-wide output enable (active low) |
| Pin produk 67 | DEV_CLRn — Device-wide clear (active low) |
| Pin produk 68 | MSEL0 — Configuration mode select 0 |
| Pin produk 69 | MSEL1 — Configuration mode select 1 |
| Pin produk 70 | MSEL2 — Configuration mode select 2 |
| Pin produk 71 | VCCA — Analog supply for ADC/PLL (2.5V typ) |
| Pin produk 72 | GNDA — Analog ground |
| Pin produk 73 | ADCIN1 — ADC analog input channel 1 |
| Pin produk 74 | ADCIN2 — ADC analog input channel 2 |
| Pin produk 75 | VREF — ADC reference voltage |
| Pin produk 76 | GND — Ground |
| Pin produk 77 | I/O — General purpose user I/O bank 1 |
| Pin produk 78 | I/O — General purpose user I/O bank 1 |
| Pin produk 79 | I/O — General purpose user I/O bank 1 |
| Pin produk 80 | I/O — General purpose user I/O bank 1 |
| Pin produk 81 | I/O — General purpose user I/O bank 2 |
| Pin produk 82 | I/O — General purpose user I/O bank 2 |
| Pin produk 83 | I/O — General purpose user I/O bank 2 |
| Pin produk 84 | I/O — General purpose user I/O bank 2 |
| Pin produk 85 | I/O — General purpose user I/O bank 3 |
| Pin produk 86 | I/O — General purpose user I/O bank 3 |
| Pin produk 87 | I/O — General purpose user I/O bank 3 |
| Pin produk 88 | I/O — General purpose user I/O bank 3 |
| Pin produk 89 | I/O — General purpose user I/O bank 4 |
| Pin produk 90 | I/O — General purpose user I/O bank 4 |
| Pin produk 91 | I/O — General purpose user I/O bank 4 |
| Pin produk 92 | I/O — General purpose user I/O bank 4 |
| Pin produk 93 | I/O — General purpose user I/O bank 5 |
| Pin produk 94 | I/O — General purpose user I/O bank 5 |
| Pin produk 95 | I/O — General purpose user I/O bank 5 |
| Pin produk 96 | I/O — General purpose user I/O bank 5 |
| Pin produk 97 | I/O — General purpose user I/O bank 6 |
| Pin produk 98 | I/O — General purpose user I/O bank 6 |
| Pin produk 99 | I/O — General purpose user I/O bank 6 |
| Pin produk 100 | I/O — General purpose user I/O bank 6 |
| Pin produk 101 | I/O — General purpose user I/O bank 7 |
| Pin produk 102 | I/O — General purpose user I/O bank 7 |
| Pin produk 103 | I/O — General purpose user I/O bank 7 |
| Pin produk 104 | I/O — General purpose user I/O bank 7 |
| Pin produk 105 | I/O — General purpose user I/O bank 8 |
| Pin produk 106 | I/O — General purpose user I/O bank 8 |
| Pin produk 107 | I/O — General purpose user I/O bank 8 |
| Pin produk 108 | I/O — General purpose user I/O bank 8 |
| Pin produk 109 | GND — Ground |
| Pin produk 110 | VCCINT — Core supply voltage (1.2V typ) |
| Pin produk 111 | GND — Ground |
| Pin produk 112 | I/O — General purpose user I/O bank 1 |
| Pin produk 113 | I/O — General purpose user I/O bank 1 |
| Pin produk 114 | I/O — General purpose user I/O bank 2 |
| Pin produk 115 | I/O — General purpose user I/O bank 2 |
| Pin produk 116 | I/O — General purpose user I/O bank 3 |
| Pin produk 117 | I/O — General purpose user I/O bank 3 |
| Pin produk 118 | I/O — General purpose user I/O bank 4 |
| Pin produk 119 | I/O — General purpose user I/O bank 4 |
| Pin produk 120 | I/O — General purpose user I/O bank 5 |
| Pin produk 121 | I/O — General purpose user I/O bank 5 |
| Pin produk 122 | I/O — General purpose user I/O bank 6 |
| Pin produk 123 | I/O — General purpose user I/O bank 6 |
| Pin produk 124 | I/O — General purpose user I/O bank 7 |
| Pin produk 125 | I/O — General purpose user I/O bank 7 |
| Pin produk 126 | I/O — General purpose user I/O bank 8 |
| Pin produk 127 | I/O — General purpose user I/O bank 8 |
| Pin produk 128 | GND — Ground |
| Pin produk 129 | I/O — General purpose user I/O bank 1 |
| Pin produk 130 | I/O — General purpose user I/O bank 1 |
| Pin produk 131 | I/O — General purpose user I/O bank 2 |
| Pin produk 132 | I/O — General purpose user I/O bank 2 |
| Pin produk 133 | I/O — General purpose user I/O bank 3 |
| Pin produk 134 | I/O — General purpose user I/O bank 3 |
| Pin produk 135 | I/O — General purpose user I/O bank 4 |
| Pin produk 136 | I/O — General purpose user I/O bank 4 |
| Pin produk 137 | I/O — General purpose user I/O bank 5 |
| Pin produk 138 | I/O — General purpose user I/O bank 5 |
| Pin produk 139 | I/O — General purpose user I/O bank 6 |
| Pin produk 140 | I/O — General purpose user I/O bank 6 |
| Pin produk 141 | I/O — General purpose user I/O bank 7 |
| Pin produk 142 | I/O — General purpose user I/O bank 7 |
| Pin produk 143 | I/O — General purpose user I/O bank 8 |
| Pin produk 144 | I/O — General purpose user I/O bank 8 |
Aplikasi Umum
10M08SCE144I7 cocok untuk 6 aplikasis: Industrial I/O Expansion Module, Motor Control Front-End, Multi-Protocol Bridge Logic, Low-Cost Video Processing Pipeline, Sensor Aggregation Hub, Avionics and Drone Flight Controller.
Industrial I/O Expansion Module
The 10M08SCE144I7's 101 user I/O pins and industrial -40C to +100C temperature grade make it ideal for rack-mounted I/O expansion cards in factory automation. Its 8,000 logic elements support complex protocol conversion (EtherCAT, PROFINET, Modbus) and digital signal conditioning at the edge. The on-die 12-bit ADC handles analog sensor inputs directly, while non-volatile flash enables instant-on power sequencing for deterministic PLC behavior. Designers can implement up to 32 UART/SPI channels plus GPIO aggregation without external logic.
Direkomendasikan
Motor Control Front-End
Stepper and BLDC motor controllers leverage the 10M08SCE144I7's combination of high GPIO count, hard 12-bit ADC for current sensing, and fast deterministic boot. Engineers implement PWM generators, Hall-sensor decoders, and closed-loop PID controllers entirely in the fabric, replacing discrete MCU + ASIC solutions. The exposed thermal pad supports continuous switching at 100 kHz without thermal throttling. Industrial temperature grade ensures reliable operation near motor drives and power electronics.
Direkomendasikan
Multi-Protocol Bridge Logic
The 10M08SCE144I7 excels as a bridge between legacy industrial protocols (RS-485, RS-232) and modern fieldbuses. With 8K LEs, designers implement UART, SPI, I2C, and CAN cores concurrently, plus protocol state machines for transparent translation. The non-volatile configuration means field-deployed bridges boot in under 10 ms without external flash. Low cost and small 144-EQFP footprint suit multi-port gateway designs.
Direkomendasikan
Low-Cost Video Processing Pipeline
Image aggregation and simple pixel-processing designs use the 10M08SCE144I7 to buffer camera data, perform color-space conversion, and drive LVDS or parallel RGB displays. Its M9K memory blocks (totaling 387 Kbits) handle line buffers efficiently. Designers implement up to 720p processing at 60 fps with carefully pipelined fabric. Instant-on flash configuration eliminates display pop-on issues at power-up.
Direkomendasikan
Sensor Aggregation Hub
IoT edge nodes aggregate dozens of sensors (temperature, pressure, humidity, flow) using the 10M08SCE144I7 as a low-power pre-processor. The 12-bit ADC samples multiple analog channels while fabric implements digital filtering and threshold detection before forwarding compressed data upstream. Industrial temperature grade supports outdoor and HVAC deployments. Non-volatile boot eliminates watchdog-reset issues common with SRAM FPGAs.
Direkomendasikan
Avionics and Drone Flight Controller
Small UAVs and hobbyist drones use the 10M08SCE144I7 to mix RC receiver inputs, generate PWM outputs for servos/ESCs, and run sensor-fusion glue logic. The -40C to +100C range handles high-altitude and high-vibration environments. 8K LEs fit full IMU processing plus GPS NMEA parsing. Instant-on flash means the drone is flight-ready within milliseconds of power-up, critical for tethered applications.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk 10M08SCE144I7 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | 10M08SAE144I7G | 10M16SCE144I7G | 10M08SAE144C8G | 10M08SCU169I7G | 10M02SCU169I7G | 10M08SCE144C8G |
|---|---|---|---|---|---|---|---|
| Package | 144-EQFP | 144-EQFP - same | 144-EQFP - same | 144-EQFP - same | 169-UBGA | 144-EQFP | 144-EQFP - same |
| Brand | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel |
| Logic Elements | 8000 | 8000 (same) | 16000 (2x) | 8000 (same) | 8000 (same) | 2000 (smaller) | 8000 (same) |
| Embedded Memory (Kbits) | 387 | 387 (same) | 549 (+42%) | 387 (same) | 387 (same) | 108 (-72%) | 387 (same) |
| User I/O | 101 | 101 (same) | 101 (same) | 101 (same) | 130 (+29%) | 78 (-23%) | 101 (same) |
| Temperature Grade | Industrial -40C to +100C | Automotive -40C to +125C | Industrial -40C to +100C | Commercial 0C to +85C | Industrial -40C to +100C | Industrial -40C to +100C | Commercial 0C to +85C |
| On-die Flash | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Embedded ADC | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
Diferensiator Kunci
- On-die non-volatile flash configuration eliminates boot PROM (vsCyclone V E (5CEBA4) SRAM FPGA)
- Highest GPIO density in the MAX 10 8K-LE family at 144-EQFP (vs10M02SCU169I7G (78 GPIO))
- Industrial temperature grade at lower cost than automotive variant (vs10M08SAE144I7G (automotive grade))
- Integrated 12-bit ADC and temperature sensing diode eliminate external components (vsLattice MachXO2-7000ZE)
Catatan Desain
The 10M08SCE144I7 requires three rails: VCCINT (1.2 V core), VCCIO (3.0 V typical, 8 banks), and VCCA (2.5 V analog). All three must ramp within 100 ms of each other to avoid latch-up per Intel MAX 10 handbook. Use a power sequencer IC or tying all enables to a common rail with bulk capacitance on each output to ensure monotonic ramp. Decoupling per bank: 0.1 uF X7R plus 10 uF bulk per VCCIO pin, and 0.1 uF plus 10 uF on VCCINT.
The 144-EQFP package uses an exposed thermal pad on the bottom that must be soldered to a PCB copper plane of at least 1 square inch. Estimated: at full fabric utilization (~70% LE) and 100 MHz toggle, the 10M08SCE144I7 dissipates approximately 0.5-0.8 W; with 31.4 C/W theta_JA on a 4-layer JEDEC test board, junction rise is 25-35 C above ambient. For enclosed industrial enclosures above 70 C ambient, additional copper area or forced airflow is recommended. The on-die temperature sensing diode allows real-time thermal monitoring without external sensors.
MAX 10 devices require impedance-controlled traces for LVDS pairs and DDR interfaces. Route differential pairs with 100 ohm differential impedance and length-matched within 20 mils. Place JTAG pull-ups (10 kohm to VCCIO) on TMS, TDI, and nCONFIG per Intel AN 446. Keep the exposed-pad footprint free of signal vias within 0.5 mm of the pad edges to maintain solder joint reliability.
Common design pitfalls with the 10M08SCE144I7 include: (1) forgetting to set MSEL pins correctly for the desired configuration mode - leaving them floating causes configuration failures; (2) using LVDS without 2.5 V VCCIO on those banks - 3.3 V only supports LVCMOS; (3) omitting the ADC reference decoupling - VREF requires 0.1 uF X7R close to the pin; (4) assuming all 144 pins are user I/O - 101 are GPIO, others are power/ground/JTAG; (5) selecting the wrong Quartus Prime device variant, which causes bitstream generation to fail at compile time.
Informasi Konformitas
RoHS compliant per Altera/Intel product page. Industrial temperature grade (I7 suffix) is NOT AEC-Q100 qualified; choose SAE144I7G with A7 suffix for AEC-Q100 automotive.
