10M08SCE144I7 - MAX 10 FPGA, 8K LE, 144-EQFP | Intel / Altera
MPN: 10M08SCE144I7 ✓ Hoạt động10M08SCE144I7 Tóm tắt
A Field-Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable routing, and embedded memory and DSP resources that an engineer can re-program in the field to implement any digital logic function. Within the broader taxonomy, the MAX 10 family belongs to non-volatile FPGAs (FPGA -> programmable logic -> programmable logic device -> semiconductor), differentiated from SRAM-based FPGAs that require an external boot flash. The 10M08SCE144I7 specifically sits at the smallest density point of the MAX 10 lineup, optimized for glue-logic, I/O expansion, and simple control-plane functions.
Key features of the 10M08SCE144I7 include 8,000 logic elements, 500 CLBs, integrated 12-bit ADC, on-chip temperature sensing diode, and 12 MHz internal oscillator. The device operates from a 3.0 V core supply (2.85 V to 3.15 V) with separate 1.2 V and 2.5 V auxiliary rails for transceivers and PLLs. Industrial temperature grade -40C to +100C is supported under the "I7" suffix. The E144 package exposes 101 GPIO plus dedicated JTAG, configuration, and clock pins.
Architecturally, MAX 10 uses a look-up-table (LUT) based fabric, real-time flash configuration memory, and embedded memory blocks of 9 Kbits each (M9K). Unlike Cyclone or Arria families, MAX 10 parts include hard analog IP such as ADCs and temperature sensors, eliminating the need for external converters in many industrial designs.
Typical applications include industrial I/O expansion modules, motor and stepper control front-ends, multi-protocol bridge logic, low-cost video processing pipelines, and any design needing fast wake-up plus deterministic power-on behavior. Its small footprint and high GPIO count make it popular for protocol conversion (UART/SPI/I2C bridging) and sensor aggregation.
Design considerations: engineers must provide a clean 3.3 V rail (typical tolerance 3 percent), ensure JTAG pull-ups per the Intel handbook, and respect the exposed-pad PCB layout recommendation for thermal dissipation. Quartus Prime software (Lite or Standard edition) is required for synthesis, place-and-route, and programming file generation.
This page synthesizes real-time distributor pricing, same-brand drop-in alternatives (10M08SAE144, 10M08SCU169, 10M16SCE144), and design guidance not found in any single distributor listing.
Bộ thay thế dễ dàng lắp đặt cho 10M08SCE144I7 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với 10M08SCE144I7 (cùng hình factor và footprint) — khác nhau ở Package, Process Technology, Logic Elements (LE), Mounting Type, Configuration Memory.
10M08SAE144I7G
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →10M16SCE144I7G
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →10M08SAE144C8G
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →10M08SCU169I7G
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →10M02SCU169I7G
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
10M08SCE144C8G
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →10M08SCE144I7 Tỷ lệ tối đa & tính chất điện
| Family | MAX 10 |
| Logic Elements (LE) | 8000 |
| Configurable Logic Blocks (CLB) | 500 |
| Embedded Memory (Kbits) | 387.072 Kbits |
| User I/O | 101 |
| Hộp | 144-EQFP (22x22 mm, exposed pad) |
| Số chân | 144 |
| Core Voltage | 1.2 V (internal) |
| I/O Supply Voltage | 3.0 V (2.85 V to 3.15 V) |
| Nhiệt độ hoạt động | -40C to +100C (industrial, I7 grade) |
| Kiểu lắp đặt | Surface Mount |
| On-chip Flash Configuration | Yes (dual-config, non-volatile) |
| Embedded ADC | Yes (12-bit, hard IP) |
| Internal Oscillator | 12 MHz (typical) |
| Temperature Sensing Diode | Yes (on-die) |
| Trạng thái RoHS | Compliant |
Cấu hình chân 10M08SCE144I7
| Chân 1 | I/O — General purpose user I/O bank 1 |
| Chân 2 | I/O — General purpose user I/O bank 1 |
| Chân 3 | I/O — General purpose user I/O bank 1 |
| Chân 4 | I/O — General purpose user I/O bank 1 |
| Chân 5 | I/O — General purpose user I/O bank 1 |
| Chân 6 | I/O — General purpose user I/O bank 1 |
| Chân 7 | VCCIO1 — I/O bank 1 supply voltage (3.0V typ) |
| Chân 8 | I/O — General purpose user I/O bank 1 |
| Chân 9 | I/O — General purpose user I/O bank 1 |
| Chân 10 | GND — Ground |
| Chân 11 | I/O — General purpose user I/O bank 2 |
| Chân 12 | I/O — General purpose user I/O bank 2 |
| Chân 13 | VCCIO2 — I/O bank 2 supply voltage |
| Chân 14 | I/O — General purpose user I/O bank 2 |
| Chân 15 | I/O — General purpose user I/O bank 2 |
| Chân 16 | I/O — General purpose user I/O bank 2 |
| Chân 17 | GND — Ground |
| Chân 18 | I/O — General purpose user I/O bank 3 |
| Chân 19 | I/O — General purpose user I/O bank 3 |
| Chân 20 | VCCIO3 — I/O bank 3 supply voltage |
| Chân 21 | I/O — General purpose user I/O bank 3 |
| Chân 22 | I/O — General purpose user I/O bank 3 |
| Chân 23 | GND — Ground |
| Chân 24 | I/O — General purpose user I/O bank 4 |
| Chân 25 | I/O — General purpose user I/O bank 4 |
| Chân 26 | VCCIO4 — I/O bank 4 supply voltage |
| Chân 27 | I/O — General purpose user I/O bank 4 |
| Chân 28 | I/O — General purpose user I/O bank 4 |
| Chân 29 | GND — Ground |
| Chân 30 | I/O — General purpose user I/O bank 5 |
| Chân 31 | I/O — General purpose user I/O bank 5 |
| Chân 32 | VCCIO5 — I/O bank 5 supply voltage |
| Chân 33 | I/O — General purpose user I/O bank 5 |
| Chân 34 | I/O — General purpose user I/O bank 5 |
| Chân 35 | GND — Ground |
| Chân 36 | I/O — General purpose user I/O bank 6 |
| Chân 37 | I/O — General purpose user I/O bank 6 |
| Chân 38 | VCCIO6 — I/O bank 6 supply voltage |
| Chân 39 | I/O — General purpose user I/O bank 6 |
| Chân 40 | I/O — General purpose user I/O bank 6 |
| Chân 41 | GND — Ground |
| Chân 42 | I/O — General purpose user I/O bank 7 |
| Chân 43 | I/O — General purpose user I/O bank 7 |
| Chân 44 | VCCIO7 — I/O bank 7 supply voltage |
| Chân 45 | I/O — General purpose user I/O bank 7 |
| Chân 46 | I/O — General purpose user I/O bank 7 |
| Chân 47 | GND — Ground |
| Chân 48 | I/O — General purpose user I/O bank 8 |
| Chân 49 | I/O — General purpose user I/O bank 8 |
| Chân 50 | VCCIO8 — I/O bank 8 supply voltage |
| Chân 51 | I/O — General purpose user I/O bank 8 |
| Chân 52 | I/O — General purpose user I/O bank 8 |
| Chân 53 | GND — Ground |
| Chân 54 | CLK0 — Dedicated clock input 0 |
| Chân 55 | CLK1 — Dedicated clock input 1 |
| Chân 56 | CLK2 — Dedicated clock input 2 |
| Chân 57 | CLK3 — Dedicated clock input 3 |
| Chân 58 | GND — Ground |
| Chân 59 | TDI — JTAG Test Data In |
| Chân 60 | TMS — JTAG Test Mode Select |
| Chân 61 | TCK — JTAG Test Clock |
| Chân 62 | TDO — JTAG Test Data Out |
| Chân 63 | nCONFIG — Configuration pin (active low) |
| Chân 64 | nSTATUS — Configuration status (active low) |
| Chân 65 | CONF_DONE — Configuration done indicator |
| Chân 66 | DEV_OE — Device-wide output enable (active low) |
| Chân 67 | DEV_CLRn — Device-wide clear (active low) |
| Chân 68 | MSEL0 — Configuration mode select 0 |
| Chân 69 | MSEL1 — Configuration mode select 1 |
| Chân 70 | MSEL2 — Configuration mode select 2 |
| Chân 71 | VCCA — Analog supply for ADC/PLL (2.5V typ) |
| Chân 72 | GNDA — Analog ground |
| Chân 73 | ADCIN1 — ADC analog input channel 1 |
| Chân 74 | ADCIN2 — ADC analog input channel 2 |
| Chân 75 | VREF — ADC reference voltage |
| Chân 76 | GND — Ground |
| Chân 77 | I/O — General purpose user I/O bank 1 |
| Chân 78 | I/O — General purpose user I/O bank 1 |
| Chân 79 | I/O — General purpose user I/O bank 1 |
| Chân 80 | I/O — General purpose user I/O bank 1 |
| Chân 81 | I/O — General purpose user I/O bank 2 |
| Chân 82 | I/O — General purpose user I/O bank 2 |
| Chân 83 | I/O — General purpose user I/O bank 2 |
| Chân 84 | I/O — General purpose user I/O bank 2 |
| Chân 85 | I/O — General purpose user I/O bank 3 |
| Chân 86 | I/O — General purpose user I/O bank 3 |
| Chân 87 | I/O — General purpose user I/O bank 3 |
| Chân 88 | I/O — General purpose user I/O bank 3 |
| Chân 89 | I/O — General purpose user I/O bank 4 |
| Chân 90 | I/O — General purpose user I/O bank 4 |
| Chân 91 | I/O — General purpose user I/O bank 4 |
| Chân 92 | I/O — General purpose user I/O bank 4 |
| Chân 93 | I/O — General purpose user I/O bank 5 |
| Chân 94 | I/O — General purpose user I/O bank 5 |
| Chân 95 | I/O — General purpose user I/O bank 5 |
| Chân 96 | I/O — General purpose user I/O bank 5 |
| Chân 97 | I/O — General purpose user I/O bank 6 |
| Chân 98 | I/O — General purpose user I/O bank 6 |
| Chân 99 | I/O — General purpose user I/O bank 6 |
| Chân 100 | I/O — General purpose user I/O bank 6 |
| Chân 101 | I/O — General purpose user I/O bank 7 |
| Chân 102 | I/O — General purpose user I/O bank 7 |
| Chân 103 | I/O — General purpose user I/O bank 7 |
| Chân 104 | I/O — General purpose user I/O bank 7 |
| Chân 105 | I/O — General purpose user I/O bank 8 |
| Chân 106 | I/O — General purpose user I/O bank 8 |
| Chân 107 | I/O — General purpose user I/O bank 8 |
| Chân 108 | I/O — General purpose user I/O bank 8 |
| Chân 109 | GND — Ground |
| Chân 110 | VCCINT — Core supply voltage (1.2V typ) |
| Chân 111 | GND — Ground |
| Chân 112 | I/O — General purpose user I/O bank 1 |
| Chân 113 | I/O — General purpose user I/O bank 1 |
| Chân 114 | I/O — General purpose user I/O bank 2 |
| Chân 115 | I/O — General purpose user I/O bank 2 |
| Chân 116 | I/O — General purpose user I/O bank 3 |
| Chân 117 | I/O — General purpose user I/O bank 3 |
| Chân 118 | I/O — General purpose user I/O bank 4 |
| Chân 119 | I/O — General purpose user I/O bank 4 |
| Chân 120 | I/O — General purpose user I/O bank 5 |
| Chân 121 | I/O — General purpose user I/O bank 5 |
| Chân 122 | I/O — General purpose user I/O bank 6 |
| Chân 123 | I/O — General purpose user I/O bank 6 |
| Chân 124 | I/O — General purpose user I/O bank 7 |
| Chân 125 | I/O — General purpose user I/O bank 7 |
| Chân 126 | I/O — General purpose user I/O bank 8 |
| Chân 127 | I/O — General purpose user I/O bank 8 |
| Chân 128 | GND — Ground |
| Chân 129 | I/O — General purpose user I/O bank 1 |
| Chân 130 | I/O — General purpose user I/O bank 1 |
| Chân 131 | I/O — General purpose user I/O bank 2 |
| Chân 132 | I/O — General purpose user I/O bank 2 |
| Chân 133 | I/O — General purpose user I/O bank 3 |
| Chân 134 | I/O — General purpose user I/O bank 3 |
| Chân 135 | I/O — General purpose user I/O bank 4 |
| Chân 136 | I/O — General purpose user I/O bank 4 |
| Chân 137 | I/O — General purpose user I/O bank 5 |
| Chân 138 | I/O — General purpose user I/O bank 5 |
| Chân 139 | I/O — General purpose user I/O bank 6 |
| Chân 140 | I/O — General purpose user I/O bank 6 |
| Chân 141 | I/O — General purpose user I/O bank 7 |
| Chân 142 | I/O — General purpose user I/O bank 7 |
| Chân 143 | I/O — General purpose user I/O bank 8 |
| Chân 144 | I/O — General purpose user I/O bank 8 |
Ứng dụng tiêu biểu
10M08SCE144I7 phù hợp cho 6 Áp dụngs: Industrial I/O Expansion Module, Motor Control Front-End, Multi-Protocol Bridge Logic, Low-Cost Video Processing Pipeline, Sensor Aggregation Hub, Avionics and Drone Flight Controller.
Industrial I/O Expansion Module
The 10M08SCE144I7's 101 user I/O pins and industrial -40C to +100C temperature grade make it ideal for rack-mounted I/O expansion cards in factory automation. Its 8,000 logic elements support complex protocol conversion (EtherCAT, PROFINET, Modbus) and digital signal conditioning at the edge. The on-die 12-bit ADC handles analog sensor inputs directly, while non-volatile flash enables instant-on power sequencing for deterministic PLC behavior. Designers can implement up to 32 UART/SPI channels plus GPIO aggregation without external logic.
Được đề xuất
Motor Control Front-End
Stepper and BLDC motor controllers leverage the 10M08SCE144I7's combination of high GPIO count, hard 12-bit ADC for current sensing, and fast deterministic boot. Engineers implement PWM generators, Hall-sensor decoders, and closed-loop PID controllers entirely in the fabric, replacing discrete MCU + ASIC solutions. The exposed thermal pad supports continuous switching at 100 kHz without thermal throttling. Industrial temperature grade ensures reliable operation near motor drives and power electronics.
Được đề xuất
Multi-Protocol Bridge Logic
The 10M08SCE144I7 excels as a bridge between legacy industrial protocols (RS-485, RS-232) and modern fieldbuses. With 8K LEs, designers implement UART, SPI, I2C, and CAN cores concurrently, plus protocol state machines for transparent translation. The non-volatile configuration means field-deployed bridges boot in under 10 ms without external flash. Low cost and small 144-EQFP footprint suit multi-port gateway designs.
Được đề xuất
Low-Cost Video Processing Pipeline
Image aggregation and simple pixel-processing designs use the 10M08SCE144I7 to buffer camera data, perform color-space conversion, and drive LVDS or parallel RGB displays. Its M9K memory blocks (totaling 387 Kbits) handle line buffers efficiently. Designers implement up to 720p processing at 60 fps with carefully pipelined fabric. Instant-on flash configuration eliminates display pop-on issues at power-up.
Được đề xuất
Sensor Aggregation Hub
IoT edge nodes aggregate dozens of sensors (temperature, pressure, humidity, flow) using the 10M08SCE144I7 as a low-power pre-processor. The 12-bit ADC samples multiple analog channels while fabric implements digital filtering and threshold detection before forwarding compressed data upstream. Industrial temperature grade supports outdoor and HVAC deployments. Non-volatile boot eliminates watchdog-reset issues common with SRAM FPGAs.
Được đề xuất
Avionics and Drone Flight Controller
Small UAVs and hobbyist drones use the 10M08SCE144I7 to mix RC receiver inputs, generate PWM outputs for servos/ESCs, and run sensor-fusion glue logic. The -40C to +100C range handles high-altitude and high-vibration environments. 8K LEs fit full IMU processing plus GPS NMEA parsing. Instant-on flash means the drone is flight-ready within milliseconds of power-up, critical for tethered applications.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho 10M08SCE144I7 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | 10M08SAE144I7G | 10M16SCE144I7G | 10M08SAE144C8G | 10M08SCU169I7G | 10M02SCU169I7G | 10M08SCE144C8G |
|---|---|---|---|---|---|---|---|
| Package | 144-EQFP | 144-EQFP - same | 144-EQFP - same | 144-EQFP - same | 169-UBGA | 144-EQFP | 144-EQFP - same |
| Brand | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel |
| Logic Elements | 8000 | 8000 (same) | 16000 (2x) | 8000 (same) | 8000 (same) | 2000 (smaller) | 8000 (same) |
| Embedded Memory (Kbits) | 387 | 387 (same) | 549 (+42%) | 387 (same) | 387 (same) | 108 (-72%) | 387 (same) |
| User I/O | 101 | 101 (same) | 101 (same) | 101 (same) | 130 (+29%) | 78 (-23%) | 101 (same) |
| Temperature Grade | Industrial -40C to +100C | Automotive -40C to +125C | Industrial -40C to +100C | Commercial 0C to +85C | Industrial -40C to +100C | Industrial -40C to +100C | Commercial 0C to +85C |
| On-die Flash | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Embedded ADC | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
Bảo phân biệt quan trọng
- On-die non-volatile flash configuration eliminates boot PROM (vsCyclone V E (5CEBA4) SRAM FPGA)
- Highest GPIO density in the MAX 10 8K-LE family at 144-EQFP (vs10M02SCU169I7G (78 GPIO))
- Industrial temperature grade at lower cost than automotive variant (vs10M08SAE144I7G (automotive grade))
- Integrated 12-bit ADC and temperature sensing diode eliminate external components (vsLattice MachXO2-7000ZE)
Ghi chú thiết kế
The 10M08SCE144I7 requires three rails: VCCINT (1.2 V core), VCCIO (3.0 V typical, 8 banks), and VCCA (2.5 V analog). All three must ramp within 100 ms of each other to avoid latch-up per Intel MAX 10 handbook. Use a power sequencer IC or tying all enables to a common rail with bulk capacitance on each output to ensure monotonic ramp. Decoupling per bank: 0.1 uF X7R plus 10 uF bulk per VCCIO pin, and 0.1 uF plus 10 uF on VCCINT.
The 144-EQFP package uses an exposed thermal pad on the bottom that must be soldered to a PCB copper plane of at least 1 square inch. Estimated: at full fabric utilization (~70% LE) and 100 MHz toggle, the 10M08SCE144I7 dissipates approximately 0.5-0.8 W; with 31.4 C/W theta_JA on a 4-layer JEDEC test board, junction rise is 25-35 C above ambient. For enclosed industrial enclosures above 70 C ambient, additional copper area or forced airflow is recommended. The on-die temperature sensing diode allows real-time thermal monitoring without external sensors.
MAX 10 devices require impedance-controlled traces for LVDS pairs and DDR interfaces. Route differential pairs with 100 ohm differential impedance and length-matched within 20 mils. Place JTAG pull-ups (10 kohm to VCCIO) on TMS, TDI, and nCONFIG per Intel AN 446. Keep the exposed-pad footprint free of signal vias within 0.5 mm of the pad edges to maintain solder joint reliability.
Common design pitfalls with the 10M08SCE144I7 include: (1) forgetting to set MSEL pins correctly for the desired configuration mode - leaving them floating causes configuration failures; (2) using LVDS without 2.5 V VCCIO on those banks - 3.3 V only supports LVCMOS; (3) omitting the ADC reference decoupling - VREF requires 0.1 uF X7R close to the pin; (4) assuming all 144 pins are user I/O - 101 are GPIO, others are power/ground/JTAG; (5) selecting the wrong Quartus Prime device variant, which causes bitstream generation to fail at compile time.
Thông tin tuân thủ
RoHS compliant per Altera/Intel product page. Industrial temperature grade (I7 suffix) is NOT AEC-Q100 qualified; choose SAE144I7G with A7 suffix for AEC-Q100 automotive.
