10M25SAE144I7G - MAX 10 FPGA 25K LE 144-LQFP | Intel / Altera
MPN: 10M25SAE144I7G ✓ Aktif10M25SAE144I7G Ringkasan
A MAX 10 FPGA is a non-volatile, flash-based programmable logic device that combines look-up tables, embedded memory blocks, digital signal processing blocks, phase-locked loops, and on-chip analog-to-digital converters in a single die. Within the broader programmable logic taxonomy, MAX 10 sits below Cyclone 10 LP in cost and power, above CPLDs such as MAX V in density and DSP capability, and is the lowest-cost Intel FPGA family with integrated ADC and instant-on flash configuration.
Key features include 25,000 logic elements, 45 embedded 18x18 multipliers, four 12-bit 1 MSPS analog-to-digital converters, 1.2 V core voltage, and support for LVDS, LVCMOS, SSTL, and other single-ended I/O standards. The device also integrates user flash memory for non-volatile data storage, dual configuration flash for instant-on operation, and an on-chip temperature-sensing diode. The 144-LQFP exposed-pad package (E144) provides up to 101 general-purpose user I/O with a 22x22 mm body footprint suitable for industrial reflow assembly.
The MAX 10 architecture uses a logic-element fabric with adaptive logic modules, embedded SRAM blocks, and DSP blocks optimized for fixed- and floating-point operations. The integrated 12-bit ADC supports up to 17 analog input channels via the dedicated analog package pins, while the flash-based configuration memory eliminates external boot PROMs and enables sub-10 ms instant-on behavior in safety-critical industrial systems.
Typical applications include industrial control and motor drive, machine vision pre-processing, factory automation I/O expansion, video bridging and display controllers, low-cost ASIC/ASSP replacement, and distributed I/O aggregation at the edge of industrial Ethernet networks. The combination of non-volatile flash configuration, integrated 12-bit ADC, and industrial temperature grade makes it well suited for glue-logic designs with analog sensing and instant-on behavior.
When designing with this part, ensure the exposed pad is soldered to a sufficiently large copper pour for thermal dissipation and ground integrity, since high-utilization designs in the E144 package can dissipate 1-2 W. Use Intel Quartus Prime Lite for synthesis, place-and-route, and timing closure at no additional cost. Vertical migration between MAX 10 density grades within the same E144 footprint enables seamless design scaling.
This page synthesizes distributor pricing across DigiKey, Mouser, and Arrow, cross-references drop-in same-package MAX 10 alternatives, and consolidates practical design guidance not found in the manufacturer datasheet.
Alternatif penggantian untuk 10M25SAE144I7G — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian 10M25SAE144I7G (sama faktor bentuk dan footprint) — berbeda di dalam Package, Core Voltage, Logic Elements (LE), Operating Temperature, User Flash Memory.
10M16SAE144I7G
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
10M40SAE144I7G
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →10M50SAE144I7G
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
10M25SAE144A7G
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
10M25SCE144A7G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10M08SAE144I7G
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →10M25SAE144I7G Rating Maksimal & Karakteristik Listrik
| Series | MAX 10 |
| Family | MAX 10 FPGA |
| Logic Elements (LE) | 25,000 |
| Embedded Memory | 1,728 Kbits (691,200 bits) |
| Embedded Multipliers (18x18) | 45 |
| User I/O Pins | 101 |
| ADC Channels | 4 (12-bit, 1 MSPS) |
| User Flash Memory | Up to 1.6 Mbits |
| Process Node | 55 nm |
| Core Voltage | 1.2 V |
| Supply Voltage (Rails) | 3.0 V / 3.3 V |
| Suhu Kerja | -40C to +100C (industrial, I7G grade) |
| Paket | 144-LQFP Exposed Pad (E144), 22x22 mm |
| Tipe Mounting | Surface Mount |
| Configuration Memory | Internal flash (non-volatile, instant-on) |
| Status RoHS | Compliant |
| I/O Standards Supported | LVDS, LVCMOS, SSTL |
Konfigurasi Pin 10M25SAE144I7G
| Pin produk 1 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 2 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 3 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 4 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 5 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 6 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 7 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 8 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 9 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 10 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 11 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 12 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 13 | VCCIO1 — I/O bank 1 supply voltage |
| Pin produk 14 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 15 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 16 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 17 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 18 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 19 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 20 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 21 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 22 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 23 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 24 | I/O — General-purpose user I/O (bank 1) |
| Pin produk 25 | GND — Ground |
| Pin produk 26 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 27 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 28 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 29 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 30 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 31 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 32 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 33 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 34 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 35 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 36 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 37 | VCCIO2 — I/O bank 2 supply voltage |
| Pin produk 38 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 39 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 40 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 41 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 42 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 43 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 44 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 45 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 46 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 47 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 48 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 49 | I/O — General-purpose user I/O (bank 2) |
| Pin produk 50 | GND — Ground |
| Pin produk 51 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 52 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 53 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 54 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 55 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 56 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 57 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 58 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 59 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 60 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 61 | VCCIO3 — I/O bank 3 supply voltage |
| Pin produk 62 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 63 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 64 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 65 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 66 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 67 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 68 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 69 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 70 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 71 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 72 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 73 | I/O — General-purpose user I/O (bank 3) |
| Pin produk 74 | GND — Ground |
| Pin produk 75 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 76 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 77 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 78 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 79 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 80 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 81 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 82 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 83 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 84 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 85 | VCCIO4 — I/O bank 4 supply voltage |
| Pin produk 86 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 87 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 88 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 89 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 90 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 91 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 92 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 93 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 94 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 95 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 96 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 97 | I/O — General-purpose user I/O (bank 4) |
| Pin produk 98 | GND — Ground |
| Pin produk 99 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 100 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 101 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 102 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 103 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 104 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 105 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 106 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 107 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 108 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 109 | VCCIO5 — I/O bank 5 supply voltage |
| Pin produk 110 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 111 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 112 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 113 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 114 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 115 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 116 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 117 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 118 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 119 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 120 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 121 | I/O — General-purpose user I/O (bank 5) |
| Pin produk 122 | GND — Ground |
| Pin produk 123 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 124 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 125 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 126 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 127 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 128 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 129 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 130 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 131 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 132 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 133 | VCCIO6 — I/O bank 6 supply voltage |
| Pin produk 134 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 135 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 136 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 137 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 138 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 139 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 140 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 141 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 142 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 143 | I/O — General-purpose user I/O (bank 6) |
| Pin produk 144 | I/O — General-purpose user I/O (bank 6) |
| Pin produk EPAD | GND/thermal — Exposed thermal pad - must be soldered to ground plane |
Aplikasi Umum
10M25SAE144I7G cocok untuk 6 aplikasis: Industrial Motor Drive Controller, Machine Vision Pre-Processing Bridge, Factory Automation I/O Expansion, Video Bridging and Display Controller, Low-Cost ASIC/ASSP Replacement, Distributed Industrial Ethernet I/O Aggregation.
Industrial Motor Drive Controller
The 10M25SAE144I7G is well suited to industrial motor-drive controllers because its 25K logic elements can host encoder interfaces, PWM generation, and field-oriented control state machines while the integrated 12-bit ADC samples motor current and back-EMF without an external ADC IC. The non-volatile flash configuration delivers sub-10 ms instant-on, eliminating the boot delay typical of SRAM-based FPGAs in safety-critical drives. The industrial temperature grade (-40C to +100C for I7G) handles cabinet-side ambient swings near inverters. With 101 user I/O, designers can parallel several SPI encoder channels plus isolated UART/CAN links to a host PLC within the same device.
Direkomendasikan
Machine Vision Pre-Processing Bridge
In machine vision pre-processing, the 10M25SAE144I7G bridges parallel image sensors to host SoCs while performing thresholding, ROI cropping, and line-buffer management. The 45 embedded 18x18 multipliers accelerate small convolutional kernels for edge detection at line rate, and the 1,728 Kbits of embedded memory hold line buffers without external SRAM. LVDS support enables direct connection to high-speed image sensors, while the 144-LQFP exposed-pad package fits in compact 22x22 mm camera modules. Quartus Prime Lite provides a free toolchain for designers prototyping vision pipelines.
Direkomendasikan
Factory Automation I/O Expansion
Factory automation I/O expansion modules use the 10M25SAE144I7G to aggregate discrete sensors, opto-isolated inputs, and relay outputs onto a single fieldbus link. The 101 user I/O accommodate dozens of 24V-tolerant channels when paired with external level shifters, while the 12-bit ADC monitors supply rails and analog sensor outputs. Non-volatile instant-on behavior ensures deterministic startup when cabinets are power-cycled, which simplifies IEC 61131 PLC integration. The device pairs naturally with industrial Ethernet PHYs to form distributed I/O slices at sub-station granularity.
Direkomendasikan
Video Bridging and Display Controller
Video bridging applications such as LVDS-to-RGB or MIPI-to-LVDS conversion leverage the 10M25SAE144I7G's LVDS support, 25K logic elements for protocol conversion, and 1,728 Kbits of embedded memory for line buffering. The exposed-pad 144-LQFP package mounts on cost-sensitive display controller boards where BGA packages would inflate assembly cost. Designers can prototype format converters, scalers, and timing generators in Quartus Prime Lite, then migrate the same firmware to higher-density MAX 10 or Cyclone devices without changing the PCB footprint.
Direkomendasikan
Low-Cost ASIC/ASSP Replacement
The 10M25SAE144I7G is frequently used as a low-cost ASIC/ASSP replacement for low-to-mid volume products where a custom mask set is uneconomical. Its 25K logic elements, 45 multipliers, four ADCs, and non-volatile configuration let designers consolidate what would otherwise require a microcontroller, external ADC, configuration EEPROM, and discrete glue logic into a single 22x22 mm package. Quartus Prime Lite is free, eliminating per-seat toolchain licensing fees. Vertical migration to 10M40 or 10M50 within the same footprint lets the same PCB scale from prototype to feature-rich derivative.
Direkomendasikan
Distributed Industrial Ethernet I/O Aggregation
At the edge of industrial Ethernet networks, the 10M25SAE144I7G aggregates sensor data from multiple field-side nodes and forwards it over EtherCAT, PROFINET, or Modbus TCP links. The 12-bit ADC integrates analog sensor sampling into the same device that runs the industrial protocol stack in soft logic. Non-volatile flash configuration eliminates boot delay concerns when the node is power-cycled by the upstream switch. With 101 user I/O and an industrial temperature grade, the device fits compact IP67 field-mount enclosures typical of modern smart-factory deployments.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk 10M25SAE144I7G — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | 10M16SAE144I7G | 10M40SAE144I7G | 10M50SAE144I7G | 10M25SAE144A7G | 10M25SCE144A7G | 10M08SAE144I7G |
|---|---|---|---|---|---|---|---|
| Package | 144-LQFP Exposed Pad (E144), 22x22 mm | 144-LQFP Exposed Pad (E144) - same | 144-LQFP Exposed Pad (E144) - same | 144-LQFP Exposed Pad (E144) - same | 144-LQFP Exposed Pad (E144) - same | 144-LQFP Exposed Pad (E144) - same | 144-LQFP Exposed Pad (E144) - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 25,000 | 16,000 (-36%) | 40,000 (+60%) | 50,000 (+100%) | 25,000 (same) | 25,000 (same) | 8,000 (-68%) |
| Embedded Memory (Kbits) | 1,728 | 1,152 (-33%) | 1,260 (-27%) | 1,638 (-5%) | 1,728 (same) | 1,728 (same) | 378 (-78%) |
| 18x18 Multipliers | 45 | 32 (-29%) | 70 (+56%) | 144 (+220%) | 45 (same) | 45 (same) | 16 (-64%) |
| Operating Temperature | -40C to +100C (industrial) | -40C to +100C | -40C to +100C | -40C to +100C | 0C to +85C (commercial) | 0C to +85C (commercial) | -40C to +100C |
| Speed Grade | I7G | I7G | I7G | I7G | A7G (commercial) | A7G (commercial) | I7G |
| Integrated ADC | 4 (12-bit, 1 MSPS) | 4 (12-bit, 1 MSPS) | 4 (12-bit, 1 MSPS) | 4 (12-bit, 1 MSPS) | 4 (12-bit, 1 MSPS) | 4 (12-bit, 1 MSPS) | 4 (12-bit, 1 MSPS) |
| Configuration Memory | Internal flash (non-volatile) | Internal flash | Internal flash | Internal flash | Internal flash | Internal flash | Internal flash |
Diferensiator Kunci
- Non-volatile flash configuration with integrated 12-bit ADC (vsLattice ECP5 LFE5U-25F)
- 144-LQFP exposed-pad package with vertical migration (vsLattice MachXO3-4300)
- Free Quartus Prime Lite toolchain (vsXilinx Spartan-6)
Catatan Desain
Solder the exposed pad (EPAD) of the 144-LQFP package to a continuous ground copper pour of at least 1 square inch to dissipate 1-2 W typical and avoid thermal shutdown. Without a continuous ground pour the junction-to-ambient thermal resistance rises sharply and the device may throttle. Estimated: at 1.5 W dissipation, a 25x25 mm 4-layer 1 oz copper pour keeps theta_JA below 25 C/W, supporting industrial-temperature operation without active cooling.
Decouple each VCCIO bank pin with a 0.1 uF ceramic capacitor placed within 5 mm of the pin, and add a bulk 10 uF tantalum or ceramic capacitor near the VCCINT/VCCIO cluster. The MAX 10 device is sensitive to rail noise during configuration; insufficient decoupling can cause configuration failure or CRC errors on flash memory. Estimated: budget 20 decoupling capacitors total for the 144-LQFP package power pins.
Route LVDS pairs with 100 ohm differential impedance and matched trace lengths within 150 mils to avoid skew on high-speed LVDS channels. Use 4-layer stackup with continuous reference planes; the 22x22 mm LQFP body has long lead spans, so signal-via antipad clearance must be respected to maintain impedance. Refer to the Intel MAX 10 handbook pin connection guidelines for bank-by-bank VREF and VCCIO routing.
Keep analog input pins to the dedicated ANA pins separate from digital I/O traces, and guard the analog section with a ground ring to isolate ADC sampling noise. The four integrated 12-bit ADCs sample at 1 MSPS and will couple switching noise from nearby digital lines if layout is careless. Estimated: maintain at least 5 mm between analog input traces and any switching signal traces.
Do not confuse the I7G speed grade with the C7G commercial-temperature speed grade - the I7G part is industrial-temperature qualified while A7G is commercial-only. Also note that the MAX 10 E144 package uses identical pinouts across density grades (10M02, 10M04, 10M08, 10M16, 10M25, 10M40, 10M50), enabling vertical migration within the same PCB footprint if Quartus Prime recompilation is acceptable.
Informasi Konformitas
RoHS and REACH compliant per Intel MAX 10 product family documentation. AEC-Q100 not applicable - this is a non-automotive-grade industrial FPGA. Lead-free assembly process supported; halogen-free status not explicitly stated in provided data.
