10M40SAE144I7G - MAX 10 FPGA, 40K LE, 144-LQFP | Intel / Altera
MPN: 10M40SAE144I7G ✓ Aktif10M40SAE144I7G Ringkasan
A field-programmable gate array (FPGA) is a reconfigurable integrated circuit whose logic fabric, interconnect, and I/O behavior are defined by user-supplied configuration data, enabling hardware-level parallelism for digital glue logic, control, signal processing, and protocol bridging. Within the broader semiconductor taxonomy, an FPGA sits alongside microcontrollers, ASICs, and CPLDs as a programmable-logic device (PLD), and the MAX 10 family specifically targets low-power, cost-sensitive, non-volatile applications with integrated analog and DSP blocks.
Key features of the 10M40SAE144I7G include an embedded 12-bit analog-to-digital converter (ADC), 168 (18x18) multipliers, 5,140 Kbits of embedded SRAM, and dual-configuration flash supporting remote field updates. The -7 industrial speed grade (I7G suffix) is rated for the -40 C to +100 C industrial junction temperature range with -7 timing performance. The device is supported by the Quartus Prime design software and offers LVDS, LVCMOS, PCI, and SSTL I/O standards for flexible system integration.
The 10M40SAE144I7G architecture combines a logic array block (LAB) fabric with embedded memory blocks (M9K), DSP blocks, and a hardened ADC subsystem. Compared with SRAM-based FPGAs that require external boot memory, the on-die flash reduces board area, BOM count, and boot latency, while the dual-boot image capability enables fail-safe field upgrades. Internal regulators derive core voltages from a single external supply, simplifying power tree design.
Typical applications include industrial motor control, factory automation I/O expansion, video bridge and image preprocessing, portable medical instrumentation, and LED display controllers. The exposed-pad EQFP-144 package provides adequate thermal dissipation for moderate-power designs without an external heatsink, while the generous I/O count supports parallel buses and high-channel-count interfaces.
When designing with the 10M40SAE144I7G, observe the maximum supported configuration clock frequency, ensure the exposed pad is soldered to a sufficient copper pour for thermal relief, and follow Quartus Prime pin connection guidelines for unused and JTAG pins to reach the datasheet-specified I/O timing. Industrial-grade -7 parts typically yield the best balance between timing margin and price.
This page synthesizes distributor pricing, drop-in same-package alternatives from the MAX 10 and Cyclone families, and practical design notes not found in the manufacturer datasheet alone, helping engineers select the right logic density, speed grade, and temperature grade for their application.
Alternatif penggantian untuk 10M40SAE144I7G — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian 10M40SAE144I7G (sama faktor bentuk dan footprint) — berbeda di dalam Configuration Memory, Package, Operating Temperature, Speed Grade, Core Voltage.
10M25SAE144I7G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10M40SAE144C8G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10M16SCE144I7G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10M04SCE144I7G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10M25SAE144C8G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10M40SAE144I7G Rating Maksimal & Karakteristik Listrik
| Family | MAX 10 |
| Logic Elements | 40,000 |
| User I/Os | 101 |
| Embedded Memory (bits) | 1,290,240 |
| Embedded SRAM (Kbits) | 5,140 |
| Multipliers (18x18) | 168 |
| Process Node | 55 nm |
| Speed Grade | -7 |
| Operating Temperature Grade | Industrial |
| Junction Temperature Range | -40 C to +100 C |
| Paket | 144-LQFP Exposed Pad (EQFP-144) |
| Package Dimensions | 22 x 22 mm, 0.50 mm pitch |
| Tipe Mounting | Surface Mount |
| Status RoHS | Compliant |
| Configuration Memory | Internal (non-volatile, dual-image) |
| Embedded ADC | 12-bit, 1 MSPS (per MAX 10 family) |
| Core Voltage | 1.2 V (internal regulation) |
Konfigurasi Pin 10M40SAE144I7G
| Pin produk 1 | I/O — General-purpose user I/O bank 1 |
| Pin produk 2 | I/O — General-purpose user I/O bank 1 |
| Pin produk 3 | I/O — General-purpose user I/O bank 1 |
| Pin produk 4 | GND — Ground |
| Pin produk 5 | I/O — General-purpose user I/O bank 1 |
| Pin produk 6 | I/O — General-purpose user I/O bank 1 |
| Pin produk 7 | VCCIO1 — I/O bank 1 supply voltage |
| Pin produk 8 | I/O — General-purpose user I/O bank 1 |
| Pin produk 9 | I/O — General-purpose user I/O bank 1 |
| Pin produk 10 | I/O — General-purpose user I/O bank 1 |
| Pin produk 11 | GND — Ground |
| Pin produk 12 | I/O — General-purpose user I/O bank 1 |
| Pin produk 13 | I/O — General-purpose user I/O bank 1 |
| Pin produk 14 | I/O — General-purpose user I/O bank 1 |
| Pin produk 15 | I/O — General-purpose user I/O bank 1 |
| Pin produk 16 | I/O — General-purpose user I/O bank 1 |
| Pin produk 17 | GND — Ground |
| Pin produk 18 | I/O — General-purpose user I/O bank 1 |
| Pin produk 19 | I/O — General-purpose user I/O bank 1 |
| Pin produk 20 | I/O — General-purpose user I/O bank 1 |
| Pin produk 21 | VCCIO1 — I/O bank 1 supply voltage |
| Pin produk 22 | I/O — General-purpose user I/O bank 1 |
| Pin produk 23 | I/O — General-purpose user I/O bank 1 |
| Pin produk 24 | GND — Ground |
| Pin produk 25 | I/O — General-purpose user I/O bank 1 |
| Pin produk 26 | I/O — General-purpose user I/O bank 1 |
| Pin produk 27 | I/O — General-purpose user I/O bank 1 |
| Pin produk 28 | I/O — General-purpose user I/O bank 1 |
| Pin produk 29 | GND — Ground |
| Pin produk 30 | I/O — General-purpose user I/O bank 1 |
| Pin produk 31 | I/O — General-purpose user I/O bank 1 |
| Pin produk 32 | I/O — General-purpose user I/O bank 1 |
| Pin produk 33 | VCCIO2 — I/O bank 2 supply voltage |
| Pin produk 34 | I/O — General-purpose user I/O bank 2 |
| Pin produk 35 | I/O — General-purpose user I/O bank 2 |
| Pin produk 36 | GND — Ground |
| Pin produk 37 | I/O — General-purpose user I/O bank 2 |
| Pin produk 38 | I/O — General-purpose user I/O bank 2 |
| Pin produk 39 | I/O — General-purpose user I/O bank 2 |
| Pin produk 40 | I/O — General-purpose user I/O bank 2 |
| Pin produk 41 | I/O — General-purpose user I/O bank 2 |
| Pin produk 42 | GND — Ground |
| Pin produk 43 | I/O — General-purpose user I/O bank 2 |
| Pin produk 44 | I/O — General-purpose user I/O bank 2 |
| Pin produk 45 | I/O — General-purpose user I/O bank 2 |
| Pin produk 46 | I/O — General-purpose user I/O bank 2 |
| Pin produk 47 | I/O — General-purpose user I/O bank 2 |
| Pin produk 48 | GND — Ground |
| Pin produk 49 | I/O — General-purpose user I/O bank 2 |
| Pin produk 50 | I/O — General-purpose user I/O bank 2 |
| Pin produk 51 | I/O — General-purpose user I/O bank 2 |
| Pin produk 52 | VCCIO2 — I/O bank 2 supply voltage |
| Pin produk 53 | I/O — General-purpose user I/O bank 2 |
| Pin produk 54 | I/O — General-purpose user I/O bank 2 |
| Pin produk 55 | GND — Ground |
| Pin produk 56 | I/O — General-purpose user I/O bank 2 |
| Pin produk 57 | I/O — General-purpose user I/O bank 2 |
| Pin produk 58 | I/O — General-purpose user I/O bank 2 |
| Pin produk 59 | I/O — General-purpose user I/O bank 2 |
| Pin produk 60 | I/O — General-purpose user I/O bank 2 |
| Pin produk 61 | GND — Ground |
| Pin produk 62 | I/O — General-purpose user I/O bank 3 |
| Pin produk 63 | I/O — General-purpose user I/O bank 3 |
| Pin produk 64 | I/O — General-purpose user I/O bank 3 |
| Pin produk 65 | I/O — General-purpose user I/O bank 3 |
| Pin produk 66 | VCCIO3 — I/O bank 3 supply voltage |
| Pin produk 67 | I/O — General-purpose user I/O bank 3 |
| Pin produk 68 | I/O — General-purpose user I/O bank 3 |
| Pin produk 69 | GND — Ground |
| Pin produk 70 | I/O — General-purpose user I/O bank 3 |
| Pin produk 71 | I/O — General-purpose user I/O bank 3 |
| Pin produk 72 | I/O — General-purpose user I/O bank 3 |
| Pin produk 73 | I/O — General-purpose user I/O bank 3 |
| Pin produk 74 | I/O — General-purpose user I/O bank 3 |
| Pin produk 75 | GND — Ground |
| Pin produk 76 | I/O — General-purpose user I/O bank 3 |
| Pin produk 77 | I/O — General-purpose user I/O bank 3 |
| Pin produk 78 | I/O — General-purpose user I/O bank 3 |
| Pin produk 79 | VCCIO3 — I/O bank 3 supply voltage |
| Pin produk 80 | I/O — General-purpose user I/O bank 3 |
| Pin produk 81 | I/O — General-purpose user I/O bank 3 |
| Pin produk 82 | GND — Ground |
| Pin produk 83 | I/O — General-purpose user I/O bank 3 |
| Pin produk 84 | I/O — General-purpose user I/O bank 3 |
| Pin produk 85 | I/O — General-purpose user I/O bank 3 |
| Pin produk 86 | I/O — General-purpose user I/O bank 3 |
| Pin produk 87 | I/O — General-purpose user I/O bank 3 |
| Pin produk 88 | GND — Ground |
| Pin produk 89 | I/O — General-purpose user I/O bank 4 |
| Pin produk 90 | I/O — General-purpose user I/O bank 4 |
| Pin produk 91 | I/O — General-purpose user I/O bank 4 |
| Pin produk 92 | I/O — General-purpose user I/O bank 4 |
| Pin produk 93 | VCCIO4 — I/O bank 4 supply voltage |
| Pin produk 94 | I/O — General-purpose user I/O bank 4 |
| Pin produk 95 | I/O — General-purpose user I/O bank 4 |
| Pin produk 96 | GND — Ground |
| Pin produk 97 | I/O — General-purpose user I/O bank 4 |
| Pin produk 98 | I/O — General-purpose user I/O bank 4 |
| Pin produk 99 | I/O — General-purpose user I/O bank 4 |
| Pin produk 100 | I/O — General-purpose user I/O bank 4 |
| Pin produk 101 | I/O — General-purpose user I/O bank 4 |
| Pin produk 102 | GND — Ground |
| Pin produk 103 | I/O — General-purpose user I/O bank 4 |
| Pin produk 104 | I/O — General-purpose user I/O bank 4 |
| Pin produk 105 | I/O — General-purpose user I/O bank 4 |
| Pin produk 106 | I/O — General-purpose user I/O bank 4 |
| Pin produk 107 | I/O — General-purpose user I/O bank 4 |
| Pin produk 108 | GND — Ground |
| Pin produk 109 | I/O — General-purpose user I/O bank 5 |
| Pin produk 110 | I/O — General-purpose user I/O bank 5 |
| Pin produk 111 | I/O — General-purpose user I/O bank 5 |
| Pin produk 112 | I/O — General-purpose user I/O bank 5 |
| Pin produk 113 | VCCIO5 — I/O bank 5 supply voltage |
| Pin produk 114 | I/O — General-purpose user I/O bank 5 |
| Pin produk 115 | I/O — General-purpose user I/O bank 5 |
| Pin produk 116 | GND — Ground |
| Pin produk 117 | I/O — General-purpose user I/O bank 5 |
| Pin produk 118 | I/O — General-purpose user I/O bank 5 |
| Pin produk 119 | I/O — General-purpose user I/O bank 5 |
| Pin produk 120 | I/O — General-purpose user I/O bank 5 |
| Pin produk 121 | I/O — General-purpose user I/O bank 5 |
| Pin produk 122 | GND — Ground |
| Pin produk 123 | I/O — General-purpose user I/O bank 5 |
| Pin produk 124 | I/O — General-purpose user I/O bank 5 |
| Pin produk 125 | I/O — General-purpose user I/O bank 5 |
| Pin produk 126 | VCCIO5 — I/O bank 5 supply voltage |
| Pin produk 127 | I/O — General-purpose user I/O bank 5 |
| Pin produk 128 | I/O — General-purpose user I/O bank 5 |
| Pin produk 129 | GND — Ground |
| Pin produk 130 | I/O — General-purpose user I/O bank 6 |
| Pin produk 131 | I/O — General-purpose user I/O bank 6 |
| Pin produk 132 | I/O — General-purpose user I/O bank 6 |
| Pin produk 133 | I/O — General-purpose user I/O bank 6 |
| Pin produk 134 | I/O — General-purpose user I/O bank 6 |
| Pin produk 135 | GND — Ground |
| Pin produk 136 | I/O — General-purpose user I/O bank 6 |
| Pin produk 137 | I/O — General-purpose user I/O bank 6 |
| Pin produk 138 | I/O — General-purpose user I/O bank 6 |
| Pin produk 139 | I/O — General-purpose user I/O bank 6 |
| Pin produk 140 | VCCIO6 — I/O bank 6 supply voltage |
| Pin produk 141 | I/O — General-purpose user I/O bank 6 |
| Pin produk 142 | I/O — General-purpose user I/O bank 6 |
| Pin produk 143 | GND — Ground |
| Pin produk 144 | I/O — General-purpose user I/O bank 6 |
Aplikasi Umum
10M40SAE144I7G cocok untuk 6 aplikasis: Industrial Motor Control, Factory Automation I/O Expansion, Video Bridge and Image Preprocessing, Portable Medical Instrumentation, LED Display Controllers, Automotive Body and Comfort Electronics.
Industrial Motor Control
The 10M40SAE144I7G suits industrial motor-control boards because its 40,000 logic elements and 168 (18x18) multipliers implement field-oriented control (FOC), space-vector PWM, and quadrature-encoder decoding without an external DSP. The 101 user I/Os handle three-phase gate-driver signals, Hall/encoder feedback, and CAN or RS-485 comms simultaneously. Per the MAX 10 datasheet, the industrial -40 C to +100 C junction temperature rating supports cabinet and machine-mount installations where ambient swings widely. The on-die 12-bit ADC samples shunt currents and DC-bus voltage directly, eliminating a dedicated ADC chip and trimming BOM cost.
Direkomendasikan
Factory Automation I/O Expansion
The 10M40SAE144I7G operates as a distributed I/O concentrator in factory-automation cells, aggregating discrete and analog sensor data over EtherCAT, PROFINET, or Modbus TCP links. Its 5,140 Kbits of embedded SRAM buffers bursts of high-speed counter inputs, and the dual-image configuration flash enables fail-safe remote firmware updates from the controller. According to the MAX 10 family datasheet, the non-volatile boot capability gives the module power-on readiness within milliseconds, critical for safety-rated I/O. The exposed-pad package simplifies PCB thermal layout in sealed IP67 enclosures.
Direkomendasikan
Video Bridge and Image Preprocessing
The 10M40SAE144I7G acts as a video-format bridge between image sensors, displays, and SoCs, converting MIPI-CSI to parallel RGB, deinterlacing legacy video, or performing simple color-space transforms. Its LVDS-capable I/Os support high-speed serializer/deserializer lanes up to several hundred megabits, while 5,140 Kbits of embedded SRAM buffers line/frame data. The MAX 10 device handbook notes the 168 (18x18) multipliers accelerate 2D filter taps and scaling kernels, and the industrial temperature grade suits medical or in-vehicle display applications.
Direkomendasikan
Portable Medical Instrumentation
The 10M40SAE144I7G powers portable patient-monitoring and point-of-care instruments, hosting display controllers, key-scan, and signal-conditioning glue logic next to a host MCU. Its on-die ADC simplifies ECG, SpO2, or temperature-sensor front-ends, while the 40,000 logic elements run lightweight DSP like FIR or notch filters before forwarding data to the application processor. Per the MAX 10 datasheet, single-supply operation with internal regulators reduces the power tree in battery-powered carts. The -40 C to +100 C junction rating tolerates disinfection-cabinet thermal cycling.
Direkomendasikan
LED Display Controllers
The 10M40SAE144I7G drives large-format LED video walls and architectural lighting, generating refresh, gamma-correction, and pixel-mapping pipelines for thousands of channels. Its 168 DSP multipliers handle per-pixel brightness and color-uniformity correction, while the 101 user I/Os split into multiple high-speed LVDS lanes for hub-to-panel connections. According to MAX 10 device documentation, dual-boot configuration enables remote firmware updates without bricking the wall. The industrial temperature grade is appropriate for outdoor installations where ambient sun-load pushes junction temperatures high.
Direkomendasikan
Automotive Body and Comfort Electronics
The 10M40SAE144I7G can be deployed in non-safety automotive body controllers such as HVAC, seat-control, mirror-adjustment, and lighting modules where AEC-Q100 is not mandatory. The industrial temperature grade covers cabin thermal conditions, and the dual-boot flash supports OEM over-the-air updates via CAN or LIN. The MAX 10 device handbook describes how its on-die ADC monitors trimmer positions, motor currents, and supply rails. Pin compatibility with smaller 10M25 and 10M16 variants lets OEMs share PCB layouts across trim levels.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk 10M40SAE144I7G — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | 10M25SAE144I7G | 10M40SAE144C8G | 10M16SCE144I7G | 10M04SCE144I7G | 10M25SAE144C8G |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 144-LQFP Exposed Pad (EQFP-144) | 144-LQFP Exposed Pad (EQFP-144) - same | 144-LQFP Exposed Pad (EQFP-144) - same | 144-LQFP Exposed Pad (EQFP-144) - same | 144-LQFP Exposed Pad (EQFP-144) - same | 144-LQFP Exposed Pad (EQFP-144) - same |
| Logic Elements | 40,000 | 25,000 (-37.5%) | 40,000 (identical) | 16,000 (-60%) | 4,000 (-90%) | 25,000 (-37.5%) |
| Speed Grade | -7 | -7 (identical) | -8 (slower) | -7 (identical) | -7 (identical) | -8 (slower) |
| Temperature Grade | Industrial (-40 C to +100 C) | Industrial (-40 C to +100 C) | Commercial (0 C to +85 C) | Industrial (-40 C to +100 C) | Industrial (-40 C to +100 C) | Commercial (0 C to +85 C) |
| User I/Os | 101 | 101 (identical) | 101 (identical) | 101 (identical) | 101 (identical) | 101 (identical) |
| Multipliers (18x18) | 168 | 66 (-60.7%) | 168 (identical) | 45 (-73.2%) | 16 (-90.5%) | 66 (-60.7%) |
| Embedded SRAM (Kbits) | 5,140 | 1,638 (-68.1%) | 5,140 (identical) | 840 (-83.7%) | 270 (-94.7%) | 1,638 (-68.1%) |
Diferensiator Kunci
- Largest logic element count in the MAX 10 EQFP-144 family (vs10M25SAE144I7G)
- Industrial temperature grade for harsh-environment deployment (vs10M40SAE144C8G)
- Faster -7 speed grade than the C8G alternative (vs10M40SAE144C8G)
Catatan Desain
The 144-LQFP exposed-pad package dissipates heat primarily through the underside thermal pad. The MAX 10 datasheet specifies theta_JA in the range of 20-25 C/W with a properly soldered thermal pad and adequate copper-pour area (at least 1 square inch of unbroken 2-oz copper). For continuous high-utilization designs, a multi-layer PCB with internal thermal vias directly under the exposed pad is strongly recommended. Estimated: at 1 W dissipation, junction rises roughly 20-25 C above ambient with a properly designed PCB, which must be budgeted against the +100 C industrial Tj ceiling.
Decouple each VCCIO bank with a 0.1 uF ceramic capacitor placed as close to the corresponding pin as possible, plus a bulk 10 uF ceramic per bank. Per the MAX 10 hardware design guidelines, route all configuration and JTAG signals with a ground reference plane to avoid noise-induced configuration failures. Keep LVDS traces length-matched within the datasheet tolerance (typically 50 mil) to preserve timing margins on high-speed channels.
A common mistake is to leave unused I/O banks unpowered or floating. Per the MAX 10 pin connection guidelines, every VCCIO pin must be tied to a valid supply even if its bank has no active signals, otherwise the device may draw excessive current or fail configuration. Also, never tie JTAG pins (TCK, TMS, TDI, TDO) directly to ground if JTAG is unused - leave them floating or use the recommended pull-up/pull-down values to avoid in-system programming conflicts.
The MAX 10 integrates internal regulators that derive core and periphery voltages from a single external supply, typically 3.0 V or 3.3 V. The datasheet recommends a bulk 100 uF tantalum plus 10 uF and 0.1 uF ceramics at the supply pins to handle transient in-rush. Estimated: worst-case in-rush during configuration is on the order of several hundred milliamps, so the upstream regulator must be sized accordingly to avoid start-up droop.
Informasi Konformitas
RoHS compliant per datasheet package marking and Arrow catalog page. Not AEC-Q100 qualified - this part targets industrial, not automotive safety-critical, applications. Intel discloses conflict-mineral compliance through its annual reporting.