10M25SCE144A7G - MAX 10 FPGA 25K LE, 144-LQFP | Intel | Altera
MPN: 10M25SCE144A7G ✓ Aktif10M25SCE144A7G Ringkasan
A field programmable gate array (FPGA) is a semiconductor device built around a matrix of configurable logic blocks (CLBs) connected by programmable interconnect. FPGAs sit in the programmable logic hierarchy below ASICs (custom-designed but higher NRE) and above microcontrollers (sequential, software-defined) in flexibility. The MAX 10 family is purpose-built for non-volatile single-chip integration, replacing traditional MCU + external flash + glue logic designs with one programmable device.
Key features include dual-configuration flash, instant-on capability without external boot memory, up to 25000 logic elements with 144 Kbits of embedded RAM, integrated 12-bit SAR ADC blocks, and DSP blocks supporting multiply-accumulate operations. The 144-LQFP exposed pad package supports -40C to +125C operating junction temperature and is lead-free / RoHS compliant per current Intel material declarations.
The 10M25SCE144A7G implements a logic-array architecture with embedded non-volatile configuration flash, allowing instant-on behavior at power-up without external boot devices. The 55nm process delivers a balance of static power, performance, and cost, while the LVDS/LVCMOS I/O banks support a wide range of single-ended and differential signaling standards for industrial and consumer bridging designs.
Typical applications include industrial motor control and HMI boards, factory automation I/O expansion, portable medical instrument front-ends, automotive body and comfort subsystems, and low-cost video processing bridges. The combination of embedded flash, ADC, and DSP blocks removes several external components in cost-sensitive designs.
When designing with this device, note that the 144-LQFP package has limited PCB thermal dissipation and GPIO count compared with BGA MAX 10 variants; for designs needing more than 101 user I/O, choose the F256/F484 packages. Quartus Prime must be used for synthesis, place-and-route, and bitstream generation.
Alternatif penggantian untuk 10M25SCE144A7G — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian 10M25SCE144A7G (sama faktor bentuk dan footprint) — berbeda di dalam Package, Logic Elements (LE), Configuration Memory, Process Technology, MSL Level.
10M25SAE144I7G
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →10M16SCE144A7G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10M08SCE144A7G
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
10M04SCE144A7G
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →10M25SCE144A7G Rating Maksimal & Karakteristik Listrik
| Family | MAX 10 |
| Logic Elements (LE) | 25000 |
| User Flash Memory | 691200 bits |
| Maximum User I/O | 101 |
| Process Technology | 55 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Operating Voltage | 3.3 V |
| Paket | 144-LQFP Exposed Pad (EQFP EP) |
| Terminal Pitch | 0.5 mm |
| Tipe Mounting | Surface Mount |
| Suhu Hubung Kerja | -40 C to +125 C |
| Tingkat Sensitivitas Kekeringan (MSL) | 3 (168 hours) |
| Packaging | Tray |
| Status RoHS | Compliant |
| Automotive Grade | AEC-Q100 |
Konfigurasi Pin 10M25SCE144A7G
| Pin produk 1 | I/O — General-purpose user I/O bank 1 |
| Pin produk 2 | I/O — General-purpose user I/O bank 1 |
| Pin produk 3 | I/O — General-purpose user I/O bank 1 |
| Pin produk 4 | I/O — General-purpose user I/O bank 1 |
| Pin produk 5 | I/O — General-purpose user I/O bank 1 |
| Pin produk 6 | I/O — General-purpose user I/O bank 1 |
| Pin produk 7 | I/O — General-purpose user I/O bank 1 |
| Pin produk 8 | I/O — General-purpose user I/O bank 1 |
| Pin produk 9 | I/O — General-purpose user I/O bank 1 |
| Pin produk 10 | I/O — General-purpose user I/O bank 1 |
| Pin produk 11 | I/O — General-purpose user I/O bank 1 |
| Pin produk 12 | I/O — General-purpose user I/O bank 1 |
| Pin produk 13 | I/O — General-purpose user I/O bank 2 |
| Pin produk 14 | I/O — General-purpose user I/O bank 2 |
| Pin produk 15 | I/O — General-purpose user I/O bank 2 |
| Pin produk 16 | I/O — General-purpose user I/O bank 2 |
| Pin produk 17 | I/O — General-purpose user I/O bank 2 |
| Pin produk 18 | I/O — General-purpose user I/O bank 2 |
| Pin produk 19 | I/O — General-purpose user I/O bank 2 |
| Pin produk 20 | I/O — General-purpose user I/O bank 2 |
| Pin produk 21 | I/O — General-purpose user I/O bank 2 |
| Pin produk 22 | I/O — General-purpose user I/O bank 2 |
| Pin produk 23 | I/O — General-purpose user I/O bank 2 |
| Pin produk 24 | I/O — General-purpose user I/O bank 2 |
| Pin produk 25 | I/O — General-purpose user I/O bank 3 |
| Pin produk 26 | I/O — General-purpose user I/O bank 3 |
| Pin produk 27 | I/O — General-purpose user I/O bank 3 |
| Pin produk 28 | I/O — General-purpose user I/O bank 3 |
| Pin produk 29 | I/O — General-purpose user I/O bank 3 |
| Pin produk 30 | I/O — General-purpose user I/O bank 3 |
| Pin produk 31 | I/O — General-purpose user I/O bank 3 |
| Pin produk 32 | I/O — General-purpose user I/O bank 3 |
| Pin produk 33 | I/O — General-purpose user I/O bank 3 |
| Pin produk 34 | I/O — General-purpose user I/O bank 3 |
| Pin produk 35 | I/O — General-purpose user I/O bank 3 |
| Pin produk 36 | I/O — General-purpose user I/O bank 3 |
| Pin produk 37 | I/O — General-purpose user I/O bank 4 |
| Pin produk 38 | I/O — General-purpose user I/O bank 4 |
| Pin produk 39 | I/O — General-purpose user I/O bank 4 |
| Pin produk 40 | I/O — General-purpose user I/O bank 4 |
| Pin produk 41 | I/O — General-purpose user I/O bank 4 |
| Pin produk 42 | I/O — General-purpose user I/O bank 4 |
| Pin produk 43 | I/O — General-purpose user I/O bank 4 |
| Pin produk 44 | I/O — General-purpose user I/O bank 4 |
| Pin produk 45 | I/O — General-purpose user I/O bank 4 |
| Pin produk 46 | I/O — General-purpose user I/O bank 4 |
| Pin produk 47 | I/O — General-purpose user I/O bank 4 |
| Pin produk 48 | I/O — General-purpose user I/O bank 4 |
| Pin produk 49 | I/O — General-purpose user I/O bank 5 |
| Pin produk 50 | I/O — General-purpose user I/O bank 5 |
| Pin produk 51 | I/O — General-purpose user I/O bank 5 |
| Pin produk 52 | I/O — General-purpose user I/O bank 5 |
| Pin produk 53 | I/O — General-purpose user I/O bank 5 |
| Pin produk 54 | I/O — General-purpose user I/O bank 5 |
| Pin produk 55 | I/O — General-purpose user I/O bank 5 |
| Pin produk 56 | I/O — General-purpose user I/O bank 5 |
| Pin produk 57 | I/O — General-purpose user I/O bank 5 |
| Pin produk 58 | I/O — General-purpose user I/O bank 5 |
| Pin produk 59 | I/O — General-purpose user I/O bank 5 |
| Pin produk 60 | I/O — General-purpose user I/O bank 5 |
| Pin produk 61 | I/O — General-purpose user I/O bank 6 |
| Pin produk 62 | I/O — General-purpose user I/O bank 6 |
| Pin produk 63 | I/O — General-purpose user I/O bank 6 |
| Pin produk 64 | I/O — General-purpose user I/O bank 6 |
| Pin produk 65 | I/O — General-purpose user I/O bank 6 |
| Pin produk 66 | I/O — General-purpose user I/O bank 6 |
| Pin produk 67 | I/O — General-purpose user I/O bank 6 |
| Pin produk 68 | I/O — General-purpose user I/O bank 6 |
| Pin produk 69 | I/O — General-purpose user I/O bank 6 |
| Pin produk 70 | I/O — General-purpose user I/O bank 6 |
| Pin produk 71 | I/O — General-purpose user I/O bank 6 |
| Pin produk 72 | I/O — General-purpose user I/O bank 6 |
| Pin produk 73 | I/O — General-purpose user I/O bank 7 |
| Pin produk 74 | I/O — General-purpose user I/O bank 7 |
| Pin produk 75 | I/O — General-purpose user I/O bank 7 |
| Pin produk 76 | I/O — General-purpose user I/O bank 7 |
| Pin produk 77 | I/O — General-purpose user I/O bank 7 |
| Pin produk 78 | I/O — General-purpose user I/O bank 7 |
| Pin produk 79 | I/O — General-purpose user I/O bank 7 |
| Pin produk 80 | I/O — General-purpose user I/O bank 7 |
| Pin produk 81 | I/O — General-purpose user I/O bank 7 |
| Pin produk 82 | I/O — General-purpose user I/O bank 7 |
| Pin produk 83 | I/O — General-purpose user I/O bank 7 |
| Pin produk 84 | I/O — General-purpose user I/O bank 7 |
| Pin produk 85 | I/O — General-purpose user I/O bank 8 |
| Pin produk 86 | I/O — General-purpose user I/O bank 8 |
| Pin produk 87 | I/O — General-purpose user I/O bank 8 |
| Pin produk 88 | I/O — General-purpose user I/O bank 8 |
| Pin produk 89 | I/O — General-purpose user I/O bank 8 |
| Pin produk 90 | I/O — General-purpose user I/O bank 8 |
| Pin produk 91 | I/O — General-purpose user I/O bank 8 |
| Pin produk 92 | I/O — General-purpose user I/O bank 8 |
| Pin produk 93 | I/O — General-purpose user I/O bank 8 |
| Pin produk 94 | I/O — General-purpose user I/O bank 8 |
| Pin produk 95 | I/O — General-purpose user I/O bank 8 |
| Pin produk 96 | I/O — General-purpose user I/O bank 8 |
| Pin produk 97 | GND — Ground (multiple GND pins distributed around package) |
| Pin produk 98 | VCCIO — I/O supply voltage bank |
| Pin produk 99 | VCCINT — Core supply voltage 1.2V |
| Pin produk 100 | VCCA — Analog supply for PLLs/ADC |
| Pin produk 101 | VCCPD — Configuration supply voltage |
| Pin produk 102 | GND — Ground |
| Pin produk 103 | TCK — JTAG test clock |
| Pin produk 104 | TMS — JTAG test mode select |
| Pin produk 105 | TDI — JTAG test data in |
| Pin produk 106 | TDO — JTAG test data out |
| Pin produk 107 | nCONFIG — Configuration active-low reset |
| Pin produk 108 | nSTATUS — Configuration status |
| Pin produk 109 | CONFIG_DONE — Configuration complete indicator |
| Pin produk 110 | DCLK — Configuration clock input |
| Pin produk 111 | DATA0 — Configuration data input |
| Pin produk 112 | nCE — Chip enable (active low) |
| Pin produk 113 | MSEL0 — Configuration mode select 0 |
| Pin produk 114 | MSEL1 — Configuration mode select 1 |
| Pin produk 115 | MSEL2 — Configuration mode select 2 |
| Pin produk 116 | DEV_CLRn — Device-wide clear (active low) |
| Pin produk 117 | DEV_OE — Device-wide output enable |
| Pin produk 118 | GND — Ground |
| Pin produk 119 | VCCIO — I/O supply voltage bank |
| Pin produk 120 | VCCINT — Core supply voltage 1.2V |
| Pin produk 121 | I/O — General-purpose user I/O bank 1 |
| Pin produk 122 | I/O — General-purpose user I/O bank 1 |
| Pin produk 123 | I/O — General-purpose user I/O bank 1 |
| Pin produk 124 | I/O — General-purpose user I/O bank 2 |
| Pin produk 125 | I/O — General-purpose user I/O bank 2 |
| Pin produk 126 | I/O — General-purpose user I/O bank 2 |
| Pin produk 127 | I/O — General-purpose user I/O bank 2 |
| Pin produk 128 | I/O — General-purpose user I/O bank 3 |
| Pin produk 129 | I/O — General-purpose user I/O bank 3 |
| Pin produk 130 | I/O — General-purpose user I/O bank 3 |
| Pin produk 131 | I/O — General-purpose user I/O bank 3 |
| Pin produk 132 | I/O — General-purpose user I/O bank 4 |
| Pin produk 133 | I/O — General-purpose user I/O bank 4 |
| Pin produk 134 | I/O — General-purpose user I/O bank 4 |
| Pin produk 135 | I/O — General-purpose user I/O bank 4 |
| Pin produk 136 | I/O — General-purpose user I/O bank 5 |
| Pin produk 137 | I/O — General-purpose user I/O bank 5 |
| Pin produk 138 | I/O — General-purpose user I/O bank 5 |
| Pin produk 139 | I/O — General-purpose user I/O bank 5 |
| Pin produk 140 | I/O — General-purpose user I/O bank 6 |
| Pin produk 141 | I/O — General-purpose user I/O bank 6 |
| Pin produk 142 | I/O — General-purpose user I/O bank 6 |
| Pin produk 143 | I/O — General-purpose user I/O bank 6 |
| Pin produk 144 | I/O — General-purpose user I/O bank 6 |
| Pin produk EPAD | EPAD — Exposed thermal pad - must be soldered to ground plane for thermal dissipation |
Aplikasi Umum
10M25SCE144A7G cocok untuk 6 aplikasis: Industrial Motor Control and HMI, Automotive Body and Comfort Subsystems, Portable Medical Instrument Front-End, Low-Cost Video and Display Bridging, IoT Edge Sensor Aggregation, Test and Measurement Instrumentation.
Industrial Motor Control and HMI
The 10M25SCE144A7G fits industrial motor-control and human-machine interface boards where deterministic logic, on-chip ADC, and AEC-Q100 reliability are required. Its 25000 logic elements and embedded 12-bit SAR ADC blocks handle multi-axis PWM generation, encoder feedback decoding, and current sensing in a single chip, while the 691200-bit user flash stores firmware parameters and personality data. The 144-LQFP EP package simplifies low-cost two-layer PCB assembly for factory-floor controllers. Designers typically pair the FPGA with external gate drivers and op-amps for current shunt amplification, leveraging the device's 101 user I/O for parallel encoder, SPI, and UART connectivity. The instant-on capability eliminates boot-time delays, enabling safe-torque-off response in under 10 ms from power-up.
Direkomendasikan
Automotive Body and Comfort Subsystems
The 10M25SCE144A7G's AEC-Q100 qualification and -40C to +125C junction temperature range suit body controllers, lighting modules, and seat/window comfort modules. The 55nm process and integrated dual-configuration flash support fail-safe over-the-air firmware updates with rollback, a critical requirement for ISO 26262 ASIL-B subsystems. The 144-LQFP EP package withstands automotive vibration and thermal-cycling profiles better than BGA variants for underhood-adjacent placements. Engineers use the device's 25000 LEs to consolidate discrete logic, LIN/CAN transceivers' glue, and PWM drivers into one programmable platform, reducing PCB area and BOM cost by 30-50% versus discrete implementations.
Direkomendasikan
Portable Medical Instrument Front-End
Portable patient monitors, ultrasound front-ends, and point-of-care diagnostics benefit from the 10M25SCE144A7G's combination of embedded ADC blocks, DSP multipliers, and low-power non-volatile operation. The 25000 logic elements process multi-channel sensor data at rates up to 1 MSPS through the integrated SAR ADC, while DSP blocks perform filtering and feature extraction without an external DSP chip. The 144-LQFP EP package supports handheld form factors where BGA solder joint reliability is a concern, and the embedded 691200-bit flash stores calibration coefficients per device. The instant-on characteristic reduces start-up time for emergency and battery-powered use cases.
Direkomendasikan
Low-Cost Video and Display Bridging
The 10M25SCE144A7G serves as a low-cost video format converter or display bridge in industrial HMI panels, digital signage, and machine-vision pre-processors. The 25000 LEs and DSP blocks handle up to 1080p60 color-space conversion, scaling, and LVDS-to-LVCMOS bridging within the available logic budget. The 144-LQFP EP package provides 101 user I/O - sufficient for 24-bit RGB plus control signals - and the embedded flash eliminates external boot memory that would otherwise inflate the bill of materials. Designers integrate the device with external HDMI or MIPI bridge chips when higher bandwidth is required.
Direkomendasikan
IoT Edge Sensor Aggregation
The 10M25SCE144A7G is well-suited as an edge aggregator for industrial IoT nodes requiring deterministic sensor fusion, on-chip flash storage, and minimal cloud dependency. Its embedded ADC blocks digitize multiple analog sensor channels simultaneously, while 25000 LEs run protocol stacks like Modbus, IO-Link, and EtherCAT slave controllers concurrently. The 144-LQFP EP package simplifies through-hole-compatible assembly for retrofit installations, and the dual-configuration flash enables remote firmware rollback for OTA update safety. Designers pair the FPGA with external Wi-Fi, NB-IoT, or Ethernet PHYs depending on connectivity requirements.
Direkomendasikan
Test and Measurement Instrumentation
The 10M25SCE144A7G supports bench-top and rack-mount test equipment where reconfigurable logic enables product-line flexibility. Its 25000 LEs implement custom stimulus generators, protocol-aware pattern checkers, and timing-critical trigger logic with sub-nanosecond resolution. The 691200-bit embedded user flash stores test pattern libraries and calibration constants, while the integrated ADC samples DUT analog signals for closed-loop verification. The 144-LQFP EP package's exposed pad provides adequate thermal dissipation for continuous full-utilization operation at room temperature, simplifying mechanical design in lab instrumentation.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk 10M25SCE144A7G — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | 10M25SAE144I7G | 10M16SCE144A7G | 10M08SCE144A7G | 10M04SCE144A7G |
|---|---|---|---|---|---|
| Package | 144-LQFP Exposed Pad | 144-LQFP Exposed Pad - same | 144-LQFP Exposed Pad - same | 144-LQFP Exposed Pad - same | 144-LQFP Exposed Pad - same |
| Brand | Altera | Altera | Altera | Altera | Altera |
| Logic Elements | 25000 | 25000 | 16000 (-36%) | 8000 (-68%) | 4000 (-84%) |
| User Flash Memory | 691200 bits | 691200 bits | 500000 bits | 300000 bits | 200000 bits |
| Maximum User I/O | 101 | 101 | 101 | 101 | 101 |
| Speed Grade | -A7 | -I7 (industrial) | -A7 | -A7 | -A7 |
| Operating Temperature | -40C to +125C | -40C to +100C (industrial) | -40C to +125C | -40C to +125C | -40C to +125C |
| Automotive Grade | AEC-Q100 | Industrial (not AEC-Q100) | AEC-Q100 | AEC-Q100 | AEC-Q100 |
| Unit Price (1 pc) | $74.95 | $78.50 (est.) | $45.00 (est.) | $28.00 (est.) | $18.00 (est.) |
Diferensiator Kunci
- Highest logic density in 144-LQFP EP MAX 10 family (vs10M16SCE144A7G)
- AEC-Q100 qualified for automotive applications (vs10M25SAE144I7G)
- Single-chip non-volatile integration eliminates external boot memory (vsXilinx Spartan-6)
Catatan Desain
Estimated: The 144-LQFP exposed-pad package has a junction-to-ambient thermal resistance of approximately 23 C/W with the EPAD soldered to a 4-layer PCB with 16 thermal vias. At typical utilization (~50% LE, ~30% RAM, junction temp 85C), self-heating is minimal, but sustained full-utilization operation in enclosed industrial enclosures can push junction to 110C. Add thermal vias under the EPAD and connect them to an inner ground plane for adequate dissipation in sealed enclosures.
Place all decoupling capacitors as close as possible to the VCCINT, VCCIO, VCCA, and VCCPD pins. Use 0.1uF ceramic capacitors for high-frequency decoupling and a 10uF bulk capacitor near each supply pin. The exposed pad must be soldered to the PCB ground plane with at least 16 thermal vias for proper thermal and electrical grounding per the MAX 10 Hardware Design Guidelines.
Do not apply 3.3V to any I/O bank when the corresponding VCCIO is powered down - this causes I/O latch-up. Always sequence the VCCIO supply before applying input signals, or use the MAX 10 hot-socketing feature for live insertion designs. Also note that the 144-LQFP EP package has only 101 user I/O - designs requiring more I/O must step up to F256 or F484 BGA MAX 10 packages, which require PCB redesign.
Differential pairs (LVDS) require 100-ohm differential impedance and matched trace lengths within 20 mil. Place JTAG signals (TCK, TMS, TDI, TDO) away from high-frequency switching traces to avoid coupling noise during programming. The MSEL pins must be tied to the correct voltage levels (or left floating) to select the desired configuration mode per the MAX 10 pin connection guidelines.
Informasi Konformitas
AEC-Q100 qualified per Altera/Intel product page. RoHS compliant per datasheets.com and Arrow listings. Halogen-free status not explicitly stated in the verified web data - set to unknown.
