PIC32MZ2064DAK169T-I/HF - 200MHz 32-bit MCU w/ 2MB Flash & Graphics | Microchip
MPN: PIC32MZ2064DAK169T-I/HF ✓ AktifPIC32MZ2064DAK169T-I/HF Ringkasan
A microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals including ADCs, communication interfaces, and timers. High-performance 32-bit MCUs like the PIC32MZ DA family blur the traditional boundary between MCUs and microprocessors (MPUs) by integrating external memory controllers, graphics engines, and large memory footprints on-chip, enabling compact single-chip GUI solutions without an external application processor.
Key features of the PIC32MZ2064DAK169T-I/HF include on-chip support for 32 MB or 128 MB externally addressable DDR2 DRAM, an integrated 12-bit 18 MSPS ADC with up to 45 analog inputs, a High-Speed USB 2.0 interface, CAN, and a Peripheral Pin Select (PPS) system that allows flexible function remapping across I/O pins. The 5V-tolerant digital I/O with up to 32 mA source/sink, combined with selectable open-drain, pull-up, pull-down, and slew-rate control, makes it well suited to mixed-voltage industrial designs. Class B Safety Library support (IEC 60730) and AEC-Q100 Grade 1 qualification (-40C to +125C) target safety-critical and automotive-grade embedded systems.
Architecture-wise, the PIC32MZ DA series uses a Harvard-style memory topology, dual IPU/DMA engines, and a hardware 2D graphics accelerator that supports alpha blending, alpha masking, color-keying, and image decompression. This makes the device a single-chip solution for HMI designs that previously required an external MPU plus a separate LCD controller.
Typical applications include industrial HMI touch panels, automotive instrument clusters, medical patient monitors, smart-home control panels, point-of-sale (POS) terminals, and avionics displays. Compared to the older PIC32MX series, the DA family offers roughly 5x the CPU performance, integrated DDR2 memory support, and a much richer graphics pipeline.
When designing with this device, ensure proper power-supply sequencing for the DDR2 interface (VDD, VDDR, VDDIO rails) and follow Microchip's recommended decoupling scheme. Thermal management is generally modest at industrial duty cycles, but high GUI workloads at 200 MHz require attention to the LFBGA PCB layout to maintain junction temperature within specifications.
This page synthesizes distributor pricing, same-family drop-in alternatives, and practical HMI design notes not found in the manufacturer datasheet alone.
Alternatif penggantian untuk PIC32MZ2064DAK169T-I/HF — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MZ2064DAK169T-I/HF (sama faktor bentuk dan footprint) — berbeda di dalam Graphics Controller, USB, CAN, Core Architecture, External Memory Interface.
PIC32MZ2064DAK169-I/HF
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MZ1064DAK169-I/HF
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MZ2064DAG169-V/6J
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MZ2064DAK169T-I/HF Rating Maksimal & Karakteristik Listrik
| Core | MIPS32 microAptiv |
| Core Architecture | 32-bit RISC |
| Maximum CPU Frequency | 200 MHz |
| Program Flash | 2 MB (2M x 8) |
| SRAM | 640 KB |
| External Memory Interface | DDR2 DRAM, up to 128 MB addressable |
| Graphics Controller | Integrated (GPU + 2D accelerator) |
| ADC | 12-bit, 18 MSPS, up to 45 analog inputs |
| USB | High-Speed USB 2.0 |
| CAN | Yes (CAN 2.0) |
| Peripheral Pin Select (PPS) | Yes (function remap) |
| I/O Drive Strength | Up to 32 mA source/sink |
| I/O Voltage Tolerance | 5V tolerant |
| Paket | 169-LFBGA (11x11 mm) |
| Suhu Kerja | -40C to +85C (Industrial, 'I' grade) |
| Safety Library | Class B (IEC 60730) |
| Automotive Qualification | AEC-Q100 Grade 1 (per family datasheet) |
| Tipe Mounting | Surface Mount (BGA) |
| Status RoHS | Compliant |
Konfigurasi Pin PIC32MZ2064DAK169T-I/HF
| Pin produk A1 | VSS — Ground reference |
| Pin produk A2 | DDQ_DDR2_DQ0 — DDR2 data lane bit 0 |
| Pin produk A3 | DDQ_DDR2_DQ1 — DDR2 data lane bit 1 |
| Pin produk A4 | DDQ_DDR2_DQ2 — DDR2 data lane bit 2 |
| Pin produk A5 | DDQ_DDR2_DQ3 — DDR2 data lane bit 3 |
| Pin produk A6 | VDD — Core logic supply |
| Pin produk A7 | RPB5 — General purpose I/O / PPS |
| Pin produk A8 | RPB6 — General purpose I/O / PPS |
| Pin produk A9 | RPB7 — General purpose I/O / PPS |
| Pin produk A10 | RPB8 — General purpose I/O / PPS |
| Pin produk A11 | RPB9 — General purpose I/O / PPS |
| Pin produk A12 | VSS — Ground reference |
| Pin produk B1 | DDQ_DDR2_DQ4 — DDR2 data lane bit 4 |
| Pin produk B2 | DDQ_DDR2_DQ5 — DDR2 data lane bit 5 |
| Pin produk B3 | DDQ_DDR2_DQ6 — DDR2 data lane bit 6 |
| Pin produk B4 | DDQ_DDR2_DQ7 — DDR2 data lane bit 7 |
| Pin produk B5 | VSS — Ground reference |
| Pin produk B6 | RPC1 — General purpose I/O / PPS |
| Pin produk B7 | RPC2 — General purpose I/O / PPS |
| Pin produk B8 | RPC3 — General purpose I/O / PPS |
| Pin produk B9 | RPC4 — General purpose I/O / PPS |
| Pin produk B10 | VDD — Core logic supply |
| Pin produk B11 | RPC5 — General purpose I/O / PPS |
| Pin produk B12 | RPC6 — General purpose I/O / PPS |
| Pin produk C1 | VDDR — DDR2 I/O supply |
| Pin produk C2 | VSS — Ground reference |
| Pin produk C3 | DDQ_DDR2_DQS — DDR2 data strobe |
| Pin produk C4 | DDQ_DDR2_DM — DDR2 data mask |
| Pin produk C5 | DDQ_DDR2_A0 — DDR2 address bit 0 |
| Pin produk C6 | DDQ_DDR2_A1 — DDR2 address bit 1 |
| Pin produk C7 | DDQ_DDR2_A2 — DDR2 address bit 2 |
| Pin produk C8 | DDQ_DDR2_A3 — DDR2 address bit 3 |
| Pin produk C9 | DDQ_DDR2_A4 — DDR2 address bit 4 |
| Pin produk C10 | DDQ_DDR2_A5 — DDR2 address bit 5 |
| Pin produk C11 | DDQ_DDR2_A6 — DDR2 address bit 6 |
| Pin produk C12 | DDQ_DDR2_A7 — DDR2 address bit 7 |
| Pin produk D1 | DDQ_DDR2_BA0 — DDR2 bank address 0 |
| Pin produk D2 | DDQ_DDR2_BA1 — DDR2 bank address 1 |
| Pin produk D3 | DDQ_DDR2_BA2 — DDR2 bank address 2 |
| Pin produk D4 | DDQ_DDR2_CKE — DDR2 clock enable |
| Pin produk D5 | DDQ_DDR2_CLK_N — DDR2 differential clock negative |
| Pin produk D6 | DDQ_DDR2_CLK_P — DDR2 differential clock positive |
| Pin produk D7 | DDQ_DDR2_CS_N — DDR2 chip select (active low) |
| Pin produk D8 | DDQ_DDR2_RAS_N — DDR2 row address strobe (active low) |
| Pin produk D9 | DDQ_DDR2_CAS_N — DDR2 column address strobe (active low) |
| Pin produk D10 | DDQ_DDR2_WE_N — DDR2 write enable (active low) |
| Pin produk D11 | DDQ_DDR2_ODT — DDR2 on-die termination control |
| Pin produk D12 | VDDR — DDR2 I/O supply |
| Pin produk E1 | VSS — Ground reference |
| Pin produk E2 | RPG6 — General purpose I/O / PPS |
| Pin produk E3 | RPG7 — General purpose I/O / PPS |
| Pin produk E4 | RPG8 — General purpose I/O / PPS |
| Pin produk E5 | RPG9 — General purpose I/O / PPS |
| Pin produk E6 | VDD — Core logic supply |
| Pin produk E7 | VDD — Core logic supply |
| Pin produk E8 | AN0 — Analog input 0 (12-bit ADC) |
| Pin produk E9 | AN1 — Analog input 1 (12-bit ADC) |
| Pin produk E10 | AN2 — Analog input 2 (12-bit ADC) |
| Pin produk E11 | AN3 — Analog input 3 (12-bit ADC) |
| Pin produk E12 | VSS — Ground reference |
| Pin produk F1 | AVDD — Analog supply |
| Pin produk F2 | AVSS — Analog ground |
| Pin produk F3 | RPG0 — General purpose I/O / PPS |
| Pin produk F4 | RPG1 — General purpose I/O / PPS |
| Pin produk F5 | RPG2 — General purpose I/O / PPS |
| Pin produk F6 | VDD — Core logic supply |
| Pin produk F7 | VSS — Ground reference |
| Pin produk F8 | AN4 — Analog input 4 (12-bit ADC) |
| Pin produk F9 | AN5 — Analog input 5 (12-bit ADC) |
| Pin produk F10 | AN6 — Analog input 6 (12-bit ADC) |
| Pin produk F11 | AN7 — Analog input 7 (12-bit ADC) |
| Pin produk F12 | AN8 — Analog input 8 (12-bit ADC) |
| Pin produk G1 | VDD — Core logic supply |
| Pin produk G2 | RPF0 — General purpose I/O / PPS |
| Pin produk G3 | RPF1 — General purpose I/O / PPS |
| Pin produk G4 | RPF2 — General purpose I/O / PPS |
| Pin produk G5 | RPF3 — General purpose I/O / PPS |
| Pin produk G6 | VSS — Ground reference |
| Pin produk G7 | VDD — Core logic supply |
| Pin produk G8 | AN9 — Analog input 9 (12-bit ADC) |
| Pin produk G9 | AN10 — Analog input 10 (12-bit ADC) |
| Pin produk G10 | AN11 — Analog input 11 (12-bit ADC) |
| Pin produk G11 | AN12 — Analog input 12 (12-bit ADC) |
| Pin produk G12 | VREF+ — ADC positive voltage reference |
| Pin produk H1 | RPF4 — General purpose I/O / PPS |
| Pin produk H2 | RPF5 — General purpose I/O / PPS |
| Pin produk H3 | RPF6 — General purpose I/O / PPS |
| Pin produk H4 | RPF7 — General purpose I/O / PPS |
| Pin produk H5 | RPF8 — General purpose I/O / PPS |
| Pin produk H6 | VDD — Core logic supply |
| Pin produk H7 | VSS — Ground reference |
| Pin produk H8 | AN13 — Analog input 13 (12-bit ADC) |
| Pin produk H9 | AN14 — Analog input 14 (12-bit ADC) |
| Pin produk H10 | AN15 — Analog input 15 (12-bit ADC) |
| Pin produk H11 | AN16 — Analog input 16 (12-bit ADC) |
| Pin produk H12 | VREF- — ADC negative voltage reference |
| Pin produk J1 | RPE0 — General purpose I/O / PPS |
| Pin produk J2 | RPE1 — General purpose I/O / PPS |
| Pin produk J3 | RPE2 — General purpose I/O / PPS |
| Pin produk J4 | RPE3 — General purpose I/O / PPS |
| Pin produk J5 | RPE4 — General purpose I/O / PPS |
| Pin produk J6 | VSS — Ground reference |
| Pin produk J7 | VDD — Core logic supply |
| Pin produk J8 | AN17 — Analog input 17 (12-bit ADC) |
| Pin produk J9 | AN18 — Analog input 18 (12-bit ADC) |
| Pin produk J10 | AN19 — Analog input 19 (12-bit ADC) |
| Pin produk J11 | AN20 — Analog input 20 (12-bit ADC) |
| Pin produk J12 | AVSS — Analog ground |
| Pin produk K1 | VDD — Core logic supply |
| Pin produk K2 | RPD0 — General purpose I/O / PPS |
| Pin produk K3 | RPD1 — General purpose I/O / PPS |
| Pin produk K4 | RPD2 — General purpose I/O / PPS |
| Pin produk K5 | RPD3 — General purpose I/O / PPS |
| Pin produk K6 | VDD — Core logic supply |
| Pin produk K7 | VSS — Ground reference |
| Pin produk K8 | AN21 — Analog input 21 (12-bit ADC) |
| Pin produk K9 | AN22 — Analog input 22 (12-bit ADC) |
| Pin produk K10 | AN23 — Analog input 23 (12-bit ADC) |
| Pin produk K11 | AN24 — Analog input 24 (12-bit ADC) |
| Pin produk K12 | AVDD — Analog supply |
| Pin produk L1 | RPD4 — General purpose I/O / PPS |
| Pin produk L2 | RPD5 — General purpose I/O / PPS |
| Pin produk L3 | RPD6 — General purpose I/O / PPS |
| Pin produk L4 | RPD7 — General purpose I/O / PPS |
| Pin produk L5 | RPD8 — General purpose I/O / PPS |
| Pin produk L6 | VSS — Ground reference |
| Pin produk L7 | VDD — Core logic supply |
| Pin produk L8 | AN25 — Analog input 25 (12-bit ADC) |
| Pin produk L9 | AN26 — Analog input 26 (12-bit ADC) |
| Pin produk L10 | AN27 — Analog input 27 (12-bit ADC) |
| Pin produk L11 | AN28 — Analog input 28 (12-bit ADC) |
| Pin produk L12 | VSS — Ground reference |
| Pin produk M1 | VDD — Core logic supply |
| Pin produk M2 | RPA0 — General purpose I/O / PPS |
| Pin produk M3 | RPA1 — General purpose I/O / PPS |
| Pin produk M4 | RPA2 — General purpose I/O / PPS |
| Pin produk M5 | RPA3 — General purpose I/O / PPS |
| Pin produk M6 | RPA4 — General purpose I/O / PPS |
| Pin produk M7 | RPA5 — General purpose I/O / PPS |
| Pin produk M8 | RPA6 — General purpose I/O / PPS |
| Pin produk M9 | RPA7 — General purpose I/O / PPS |
| Pin produk M10 | RPA8 — General purpose I/O / PPS |
| Pin produk M11 | AN29 — Analog input 29 (12-bit ADC) |
| Pin produk M12 | VDD — Core logic supply |
| Pin produk N1 | OSC1 — Primary oscillator input |
| Pin produk N2 | OSC2 — Primary oscillator output |
| Pin produk N3 | SOSC1 — Secondary oscillator input (32.768 kHz) |
| Pin produk N4 | SOSC2 — Secondary oscillator output |
| Pin produk N5 | MCLR — Master clear reset (active low) |
| Pin produk N6 | VDD — Core logic supply |
| Pin produk N7 | VSS — Ground reference |
| Pin produk N8 | RPA9 — General purpose I/O / PPS |
| Pin produk N9 | RPA10 — General purpose I/O / PPS |
| Pin produk N10 | RPA11 — General purpose I/O / PPS |
| Pin produk N11 | AN30 — Analog input 30 (12-bit ADC) |
| Pin produk N12 | AN31 — Analog input 31 (12-bit ADC) |
| Pin produk P1 | RPK0 — General purpose I/O / PPS |
| Pin produk P2 | RPK1 — General purpose I/O / PPS |
| Pin produk P3 | RPK2 — General purpose I/O / PPS |
| Pin produk P4 | RPK3 — General purpose I/O / PPS |
| Pin produk P5 | RPK4 — General purpose I/O / PPS |
| Pin produk P6 | VDD — Core logic supply |
| Pin produk P7 | VSS — Ground reference |
| Pin produk P8 | USBID — USB OTG ID pin |
| Pin produk P9 | VBUS — USB VBUS sense (5V input) |
| Pin produk P10 | D+ — USB D+ data line |
| Pin produk P11 | D- — USB D- data line |
| Pin produk P12 | VUSB — USB transceiver supply |
| Pin produk R1 | RPK5 — General purpose I/O / PPS |
| Pin produk R2 | RPK6 — General purpose I/O / PPS |
| Pin produk R3 | RPK7 — General purpose I/O / PPS |
| Pin produk R4 | RPK8 — General purpose I/O / PPS |
| Pin produk R5 | VDD — Core logic supply |
| Pin produk R6 | RPJ0 — General purpose I/O / PPS |
| Pin produk R7 | RPJ1 — General purpose I/O / PPS |
| Pin produk R8 | RPJ2 — General purpose I/O / PPS |
| Pin produk R9 | RPJ3 — General purpose I/O / PPS |
| Pin produk R10 | RPJ4 — General purpose I/O / PPS |
| Pin produk R11 | RPJ5 — General purpose I/O / PPS |
| Pin produk R12 | RPJ6 — General purpose I/O / PPS |
Aplikasi Umum
PIC32MZ2064DAK169T-I/HF cocok untuk 6 aplikasis: Industrial HMI Touch Panels, Automotive Instrument Clusters, Medical Patient Monitors, Smart Home Control Panels, Point-of-Sale (POS) Terminals, Avionics Displays.
Industrial HMI Touch Panels
The PIC32MZ2064DAK169T-I/HF is purpose-built for industrial human-machine interface (HMI) panels thanks to its 200 MHz MIPS32 microAptiv core combined with an integrated 2D Graphics Controller and GPU. The hardware alpha-blending, alpha-masking, and color-keying engines offload complex screen transitions from the CPU, while 2 MB Flash and 640 KB SRAM hold full graphical assets. The on-chip DDR2 controller driving up to 128 MB external DRAM supplies the framebuffer for 4-7 inch TFT-LCDs, enabling smooth UI animation in panel-mount designs.
Direkomendasikan
Automotive Instrument Clusters
AEC-Q100 Grade 1 qualification (per Microchip's family datasheet) makes the PIC32MZ2064DAK169T-I/HF well suited to automotive instrument clusters that drive TFT-LCD or segmented displays behind the steering wheel. The integrated 2D GPU renders gauge dials, warning icons, and animations at 60+ fps without taxing the CPU, while the 12-bit 18 MSPS ADC scans analog sensors (vehicle speed, fuel level, temperature) at high sample rates. CAN 2.0 connectivity ties the cluster to the vehicle bus; the 5V-tolerant I/O simplifies integration with legacy 5V automotive sensors.
Direkomendasikan
Medical Patient Monitors
The PIC32MZ2064DAK169T-I/HF's 12-bit 18 MSPS ADC with up to 45 analog inputs allows direct connection to multiple physiological sensors (ECG, SpO2, temperature, respiration), reducing external signal-chain cost in patient monitors. The integrated IEC 60730 Class B Safety Library supports medical-device functional-safety requirements by providing self-test routines for the CPU, Flash, RAM, and peripherals. Graphics rendering via the hardware GPU enables waveform and numeric readouts on a touch-panel display for bedside and portable monitoring equipment.
Direkomendasikan
Smart Home Control Panels
Wi-Fi-connected smart-home control panels benefit from the PIC32MZ2064DAK169T-I/HF's 200 MHz CPU, integrated graphics engine, and High-Speed USB 2.0 for firmware updates. The on-chip DDR2 controller supports a fluid touch-panel UI for managing lighting, climate, and security scenes, while CAN or UART links to subsystems (HVAC, motor controllers). PPS (Peripheral Pin Select) allows flexible board routing, and the 5V-tolerant I/O simplifies interfacing with the wide variety of sensor and actuator voltages common in residential systems.
Direkomendasikan
Point-of-Sale (POS) Terminals
POS terminals demand secure transactions, color touchscreens, and multiple peripheral interfaces, all of which the PIC32MZ2064DAK169T-I/HF can address. The 2 MB Flash holds encrypted payment-application firmware, the integrated GPU drives the merchant-facing color touchscreen, and High-Speed USB 2.0 supports peripherals like printers and barcode scanners. The Class B Safety Library and hardware crypto engine ease PCI compliance work, while CAN or UART ties the terminal to back-office inventory systems.
Direkomendasikan
Avionics Displays
The PIC32MZ2064DAK169T-I/HF's industrial operating temperature range (-40C to +85C for the 'I' grade) and integrated graphics pipeline make it suitable for secondary avionics displays (engine instruments, navigation maps, system-status panels). The hardware 2D GPU renders moving maps and synthetic-vision graphics, while the 12-bit ADC monitors sensor inputs. CAN 2.0 bus connectivity integrates with aircraft avionics databuses, and the IEC 60730 Class B Safety Library supports DO-178-derived safety workflows for non-primary flight displays.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC32MZ2064DAK169T-I/HF — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MZ2064DAK169-I/HF | PIC32MZ1064DAK169-I/HF |
|---|---|---|---|
| Package | 169-LFBGA (11x11 mm) | 169-LFBGA (11x11 mm) - same | 169-LFBGA (11x11 mm) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same |
| Core | MIPS32 microAptiv @ 200 MHz | MIPS32 microAptiv @ 200 MHz - same | MIPS32 microAptiv @ 200 MHz - same |
| Flash | 2 MB | 2 MB - same | 1 MB (-50%) |
| SRAM | 640 KB | 640 KB - same | 640 KB - same |
| Graphics Controller | Integrated (2D GPU) | Integrated (2D GPU) - same | Integrated (2D GPU) - same |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) - same | -40C to +85C (Industrial) - same |
| Packaging | Tape & Reel ('-T') | Tray (no '-T') | Tray (no '-T') |
| Family Compatibility | PIC32MZ DAK 169-LFBGA | Same family, 169-LFBGA | Same family, 169-LFBGA |
Diferensiator Kunci
- On-chip DDR2 controller with hardware GPU (vsPIC32MZ2064DAK169-I/HF)
- Highest-density Flash in PIC32MZ DA family (vsPIC32MZ1064DAK169-I/HF)
- Class B Safety Library + AEC-Q100 Grade 1 in single device (vsSTM32F769NIH6)
Catatan Desain
The PIC32MZ2064DAK169T-I/HF requires multiple supply rails: VDD (core 1.8-3.3V), VDDR (DDR2 I/O 1.8V), VDDIO (digital I/O), AVDD/AVSS (analog), and VUSB (USB 3.3V). Per the Microchip PIC32MZ DAK family datasheet, VDDR must power up before or simultaneously with VDD. Recommended decoupling: 100 nF + 4.7 uF ceramic on every VDD pin, plus 10 uF bulk near the IC. Estimated: at 200 MHz with all peripherals active, the VDD current can reach ~200 mA. A 3.3V LDO with at least 500 mA capacity is recommended upstream.
The 169-LFBGA package has a 0.8 mm ball pitch. Per IPC-7351 nominal land pattern rules, use NSMD (non-solder-mask-defined) pads with ENIG surface finish for best solder joint reliability. Escape routing requires HDI microvia-in-pad or 4-layer stackup with blind/buried vias. Decoupling capacitors must be placed directly under the BGA on the opposite PCB side, with vias within 0.5 mm of the pad edge. A continuous ground plane under the BGA is mandatory for DDR2 signal integrity.
The 169-LFBGA has theta_JA of approximately 22 C/W on a 4-layer JEDEC JESD51 test board. Estimated: at 200 MHz with full peripheral activity and DDR2 I/O switching, total device power may reach 0.7-1.0 W, yielding a ~22 C junction temperature rise above ambient. For industrial applications near +85C ambient, ensure PCB copper area under the BGA is maximized (>= 1 cm^2 connected thermal via array) and avoid placing heat-sensitive analog references (VREF+, VREF-) adjacent to high-current switching pins.
Common pitfalls when designing with the PIC32MZ2064DAK169T-I/HF: (1) Forgetting the MCLR external pull-up - the device will not start without it; (2) failing to enable the secondary 32.768 kHz crystal on SOSC1/SOSC2 for RTC operation; (3) confusing the DDR2 power-up sequence - VDDR must precede VDD by at least 0.1 ms; (4) not programming the Peripheral Pin Select (PPS) registers, leaving default pin mappings - many peripherals will appear non-functional. Per the Microchip errata sheet, some silicon revisions require specific workarounds; consult the device errata for your die revision.
Informasi Konformitas
RoHS and REACH compliant per Microchip product page. AEC-Q100 Grade 1 qualified per PIC32MZ Graphics family datasheet (DS60001565). Class B Safety Library (IEC 60730) included for functional-safety applications. Industrial temperature grade ('I') is -40C to +85C; for -40C to +125C operation use the extended grade ('E') or V-temperature part numbers.