PIC32MZ2064DAK169T-I/HF - 200MHz 32-bit MCU w/ 2MB Flash & Graphics | Microchip
부품 번호: PIC32MZ2064DAK169T-I/HF ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $22.85 | $22.85 |
| 10 | $21.4 | $214.00 |
| 100 | $18.95 | $1,895.00 |
| 500 | $16.78 | $8,390.00 |
| 1,000 | $14.92 | $14,920.00 |
| 3,000 | $13.5 | $40,500.00 |
PIC32MZ2064DAK169T-I/HF 개요
A microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals including ADCs, communication interfaces, and timers. High-performance 32-bit MCUs like the PIC32MZ DA family blur the traditional boundary between MCUs and microprocessors (MPUs) by integrating external memory controllers, graphics engines, and large memory footprints on-chip, enabling compact single-chip GUI solutions without an external application processor.
Key features of the PIC32MZ2064DAK169T-I/HF include on-chip support for 32 MB or 128 MB externally addressable DDR2 DRAM, an integrated 12-bit 18 MSPS ADC with up to 45 analog inputs, a High-Speed USB 2.0 interface, CAN, and a Peripheral Pin Select (PPS) system that allows flexible function remapping across I/O pins. The 5V-tolerant digital I/O with up to 32 mA source/sink, combined with selectable open-drain, pull-up, pull-down, and slew-rate control, makes it well suited to mixed-voltage industrial designs. Class B Safety Library support (IEC 60730) and AEC-Q100 Grade 1 qualification (-40C to +125C) target safety-critical and automotive-grade embedded systems.
Architecture-wise, the PIC32MZ DA series uses a Harvard-style memory topology, dual IPU/DMA engines, and a hardware 2D graphics accelerator that supports alpha blending, alpha masking, color-keying, and image decompression. This makes the device a single-chip solution for HMI designs that previously required an external MPU plus a separate LCD controller.
Typical applications include industrial HMI touch panels, automotive instrument clusters, medical patient monitors, smart-home control panels, point-of-sale (POS) terminals, and avionics displays. Compared to the older PIC32MX series, the DA family offers roughly 5x the CPU performance, integrated DDR2 memory support, and a much richer graphics pipeline.
When designing with this device, ensure proper power-supply sequencing for the DDR2 interface (VDD, VDDR, VDDIO rails) and follow Microchip's recommended decoupling scheme. Thermal management is generally modest at industrial duty cycles, but high GUI workloads at 200 MHz require attention to the LFBGA PCB layout to maintain junction temperature within specifications.
This page synthesizes distributor pricing, same-family drop-in alternatives, and practical HMI design notes not found in the manufacturer datasheet alone.
드롭인 대체품: PIC32MZ2064DAK169T-I/HF — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MZ2064DAK169T-I/HF (동일 폼 팩터 및 풋프린트) — 차이점: Graphics Controller, USB, CAN, Core Architecture, External Memory Interface.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MZ2064DAK169-I/HF
✅ 드롭인✓ 재고 있음
$12.8 / 개
데이터시트 보기 →PIC32MZ1064DAK169-I/HF
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MZ2064DAG169-V/6J
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MZ2064DAK169T-I/HF 최대 정격 & 전기적 특성
| Core | MIPS32 microAptiv |
| Core Architecture | 32-bit RISC |
| Maximum CPU Frequency | 200 MHz |
| Program Flash | 2 MB (2M x 8) |
| SRAM | 640 KB |
| External Memory Interface | DDR2 DRAM, up to 128 MB addressable |
| Graphics Controller | Integrated (GPU + 2D accelerator) |
| ADC | 12-bit, 18 MSPS, up to 45 analog inputs |
| USB | High-Speed USB 2.0 |
| CAN | Yes (CAN 2.0) |
| Peripheral Pin Select (PPS) | Yes (function remap) |
| I/O Drive Strength | Up to 32 mA source/sink |
| I/O Voltage Tolerance | 5V tolerant |
| 패키지 | 169-LFBGA (11x11 mm) |
| 동작 온도 | -40C to +85C (Industrial, 'I' grade) |
| Safety Library | Class B (IEC 60730) |
| Automotive Qualification | AEC-Q100 Grade 1 (per family datasheet) |
| 실장 유형 | Surface Mount (BGA) |
| RoHS 상태 | Compliant |
PIC32MZ2064DAK169T-I/HF 핀 구성
| 핀 A1 | VSS — Ground reference |
| 핀 A2 | DDQ_DDR2_DQ0 — DDR2 data lane bit 0 |
| 핀 A3 | DDQ_DDR2_DQ1 — DDR2 data lane bit 1 |
| 핀 A4 | DDQ_DDR2_DQ2 — DDR2 data lane bit 2 |
| 핀 A5 | DDQ_DDR2_DQ3 — DDR2 data lane bit 3 |
| 핀 A6 | VDD — Core logic supply |
| 핀 A7 | RPB5 — General purpose I/O / PPS |
| 핀 A8 | RPB6 — General purpose I/O / PPS |
| 핀 A9 | RPB7 — General purpose I/O / PPS |
| 핀 A10 | RPB8 — General purpose I/O / PPS |
| 핀 A11 | RPB9 — General purpose I/O / PPS |
| 핀 A12 | VSS — Ground reference |
| 핀 B1 | DDQ_DDR2_DQ4 — DDR2 data lane bit 4 |
| 핀 B2 | DDQ_DDR2_DQ5 — DDR2 data lane bit 5 |
| 핀 B3 | DDQ_DDR2_DQ6 — DDR2 data lane bit 6 |
| 핀 B4 | DDQ_DDR2_DQ7 — DDR2 data lane bit 7 |
| 핀 B5 | VSS — Ground reference |
| 핀 B6 | RPC1 — General purpose I/O / PPS |
| 핀 B7 | RPC2 — General purpose I/O / PPS |
| 핀 B8 | RPC3 — General purpose I/O / PPS |
| 핀 B9 | RPC4 — General purpose I/O / PPS |
| 핀 B10 | VDD — Core logic supply |
| 핀 B11 | RPC5 — General purpose I/O / PPS |
| 핀 B12 | RPC6 — General purpose I/O / PPS |
| 핀 C1 | VDDR — DDR2 I/O supply |
| 핀 C2 | VSS — Ground reference |
| 핀 C3 | DDQ_DDR2_DQS — DDR2 data strobe |
| 핀 C4 | DDQ_DDR2_DM — DDR2 data mask |
| 핀 C5 | DDQ_DDR2_A0 — DDR2 address bit 0 |
| 핀 C6 | DDQ_DDR2_A1 — DDR2 address bit 1 |
| 핀 C7 | DDQ_DDR2_A2 — DDR2 address bit 2 |
| 핀 C8 | DDQ_DDR2_A3 — DDR2 address bit 3 |
| 핀 C9 | DDQ_DDR2_A4 — DDR2 address bit 4 |
| 핀 C10 | DDQ_DDR2_A5 — DDR2 address bit 5 |
| 핀 C11 | DDQ_DDR2_A6 — DDR2 address bit 6 |
| 핀 C12 | DDQ_DDR2_A7 — DDR2 address bit 7 |
| 핀 D1 | DDQ_DDR2_BA0 — DDR2 bank address 0 |
| 핀 D2 | DDQ_DDR2_BA1 — DDR2 bank address 1 |
| 핀 D3 | DDQ_DDR2_BA2 — DDR2 bank address 2 |
| 핀 D4 | DDQ_DDR2_CKE — DDR2 clock enable |
| 핀 D5 | DDQ_DDR2_CLK_N — DDR2 differential clock negative |
| 핀 D6 | DDQ_DDR2_CLK_P — DDR2 differential clock positive |
| 핀 D7 | DDQ_DDR2_CS_N — DDR2 chip select (active low) |
| 핀 D8 | DDQ_DDR2_RAS_N — DDR2 row address strobe (active low) |
| 핀 D9 | DDQ_DDR2_CAS_N — DDR2 column address strobe (active low) |
| 핀 D10 | DDQ_DDR2_WE_N — DDR2 write enable (active low) |
| 핀 D11 | DDQ_DDR2_ODT — DDR2 on-die termination control |
| 핀 D12 | VDDR — DDR2 I/O supply |
| 핀 E1 | VSS — Ground reference |
| 핀 E2 | RPG6 — General purpose I/O / PPS |
| 핀 E3 | RPG7 — General purpose I/O / PPS |
| 핀 E4 | RPG8 — General purpose I/O / PPS |
| 핀 E5 | RPG9 — General purpose I/O / PPS |
| 핀 E6 | VDD — Core logic supply |
| 핀 E7 | VDD — Core logic supply |
| 핀 E8 | AN0 — Analog input 0 (12-bit ADC) |
| 핀 E9 | AN1 — Analog input 1 (12-bit ADC) |
| 핀 E10 | AN2 — Analog input 2 (12-bit ADC) |
| 핀 E11 | AN3 — Analog input 3 (12-bit ADC) |
| 핀 E12 | VSS — Ground reference |
| 핀 F1 | AVDD — Analog supply |
| 핀 F2 | AVSS — Analog ground |
| 핀 F3 | RPG0 — General purpose I/O / PPS |
| 핀 F4 | RPG1 — General purpose I/O / PPS |
| 핀 F5 | RPG2 — General purpose I/O / PPS |
| 핀 F6 | VDD — Core logic supply |
| 핀 F7 | VSS — Ground reference |
| 핀 F8 | AN4 — Analog input 4 (12-bit ADC) |
| 핀 F9 | AN5 — Analog input 5 (12-bit ADC) |
| 핀 F10 | AN6 — Analog input 6 (12-bit ADC) |
| 핀 F11 | AN7 — Analog input 7 (12-bit ADC) |
| 핀 F12 | AN8 — Analog input 8 (12-bit ADC) |
| 핀 G1 | VDD — Core logic supply |
| 핀 G2 | RPF0 — General purpose I/O / PPS |
| 핀 G3 | RPF1 — General purpose I/O / PPS |
| 핀 G4 | RPF2 — General purpose I/O / PPS |
| 핀 G5 | RPF3 — General purpose I/O / PPS |
| 핀 G6 | VSS — Ground reference |
| 핀 G7 | VDD — Core logic supply |
| 핀 G8 | AN9 — Analog input 9 (12-bit ADC) |
| 핀 G9 | AN10 — Analog input 10 (12-bit ADC) |
| 핀 G10 | AN11 — Analog input 11 (12-bit ADC) |
| 핀 G11 | AN12 — Analog input 12 (12-bit ADC) |
| 핀 G12 | VREF+ — ADC positive voltage reference |
| 핀 H1 | RPF4 — General purpose I/O / PPS |
| 핀 H2 | RPF5 — General purpose I/O / PPS |
| 핀 H3 | RPF6 — General purpose I/O / PPS |
| 핀 H4 | RPF7 — General purpose I/O / PPS |
| 핀 H5 | RPF8 — General purpose I/O / PPS |
| 핀 H6 | VDD — Core logic supply |
| 핀 H7 | VSS — Ground reference |
| 핀 H8 | AN13 — Analog input 13 (12-bit ADC) |
| 핀 H9 | AN14 — Analog input 14 (12-bit ADC) |
| 핀 H10 | AN15 — Analog input 15 (12-bit ADC) |
| 핀 H11 | AN16 — Analog input 16 (12-bit ADC) |
| 핀 H12 | VREF- — ADC negative voltage reference |
| 핀 J1 | RPE0 — General purpose I/O / PPS |
| 핀 J2 | RPE1 — General purpose I/O / PPS |
| 핀 J3 | RPE2 — General purpose I/O / PPS |
| 핀 J4 | RPE3 — General purpose I/O / PPS |
| 핀 J5 | RPE4 — General purpose I/O / PPS |
| 핀 J6 | VSS — Ground reference |
| 핀 J7 | VDD — Core logic supply |
| 핀 J8 | AN17 — Analog input 17 (12-bit ADC) |
| 핀 J9 | AN18 — Analog input 18 (12-bit ADC) |
| 핀 J10 | AN19 — Analog input 19 (12-bit ADC) |
| 핀 J11 | AN20 — Analog input 20 (12-bit ADC) |
| 핀 J12 | AVSS — Analog ground |
| 핀 K1 | VDD — Core logic supply |
| 핀 K2 | RPD0 — General purpose I/O / PPS |
| 핀 K3 | RPD1 — General purpose I/O / PPS |
| 핀 K4 | RPD2 — General purpose I/O / PPS |
| 핀 K5 | RPD3 — General purpose I/O / PPS |
| 핀 K6 | VDD — Core logic supply |
| 핀 K7 | VSS — Ground reference |
| 핀 K8 | AN21 — Analog input 21 (12-bit ADC) |
| 핀 K9 | AN22 — Analog input 22 (12-bit ADC) |
| 핀 K10 | AN23 — Analog input 23 (12-bit ADC) |
| 핀 K11 | AN24 — Analog input 24 (12-bit ADC) |
| 핀 K12 | AVDD — Analog supply |
| 핀 L1 | RPD4 — General purpose I/O / PPS |
| 핀 L2 | RPD5 — General purpose I/O / PPS |
| 핀 L3 | RPD6 — General purpose I/O / PPS |
| 핀 L4 | RPD7 — General purpose I/O / PPS |
| 핀 L5 | RPD8 — General purpose I/O / PPS |
| 핀 L6 | VSS — Ground reference |
| 핀 L7 | VDD — Core logic supply |
| 핀 L8 | AN25 — Analog input 25 (12-bit ADC) |
| 핀 L9 | AN26 — Analog input 26 (12-bit ADC) |
| 핀 L10 | AN27 — Analog input 27 (12-bit ADC) |
| 핀 L11 | AN28 — Analog input 28 (12-bit ADC) |
| 핀 L12 | VSS — Ground reference |
| 핀 M1 | VDD — Core logic supply |
| 핀 M2 | RPA0 — General purpose I/O / PPS |
| 핀 M3 | RPA1 — General purpose I/O / PPS |
| 핀 M4 | RPA2 — General purpose I/O / PPS |
| 핀 M5 | RPA3 — General purpose I/O / PPS |
| 핀 M6 | RPA4 — General purpose I/O / PPS |
| 핀 M7 | RPA5 — General purpose I/O / PPS |
| 핀 M8 | RPA6 — General purpose I/O / PPS |
| 핀 M9 | RPA7 — General purpose I/O / PPS |
| 핀 M10 | RPA8 — General purpose I/O / PPS |
| 핀 M11 | AN29 — Analog input 29 (12-bit ADC) |
| 핀 M12 | VDD — Core logic supply |
| 핀 N1 | OSC1 — Primary oscillator input |
| 핀 N2 | OSC2 — Primary oscillator output |
| 핀 N3 | SOSC1 — Secondary oscillator input (32.768 kHz) |
| 핀 N4 | SOSC2 — Secondary oscillator output |
| 핀 N5 | MCLR — Master clear reset (active low) |
| 핀 N6 | VDD — Core logic supply |
| 핀 N7 | VSS — Ground reference |
| 핀 N8 | RPA9 — General purpose I/O / PPS |
| 핀 N9 | RPA10 — General purpose I/O / PPS |
| 핀 N10 | RPA11 — General purpose I/O / PPS |
| 핀 N11 | AN30 — Analog input 30 (12-bit ADC) |
| 핀 N12 | AN31 — Analog input 31 (12-bit ADC) |
| 핀 P1 | RPK0 — General purpose I/O / PPS |
| 핀 P2 | RPK1 — General purpose I/O / PPS |
| 핀 P3 | RPK2 — General purpose I/O / PPS |
| 핀 P4 | RPK3 — General purpose I/O / PPS |
| 핀 P5 | RPK4 — General purpose I/O / PPS |
| 핀 P6 | VDD — Core logic supply |
| 핀 P7 | VSS — Ground reference |
| 핀 P8 | USBID — USB OTG ID pin |
| 핀 P9 | VBUS — USB VBUS sense (5V input) |
| 핀 P10 | D+ — USB D+ data line |
| 핀 P11 | D- — USB D- data line |
| 핀 P12 | VUSB — USB transceiver supply |
| 핀 R1 | RPK5 — General purpose I/O / PPS |
| 핀 R2 | RPK6 — General purpose I/O / PPS |
| 핀 R3 | RPK7 — General purpose I/O / PPS |
| 핀 R4 | RPK8 — General purpose I/O / PPS |
| 핀 R5 | VDD — Core logic supply |
| 핀 R6 | RPJ0 — General purpose I/O / PPS |
| 핀 R7 | RPJ1 — General purpose I/O / PPS |
| 핀 R8 | RPJ2 — General purpose I/O / PPS |
| 핀 R9 | RPJ3 — General purpose I/O / PPS |
| 핀 R10 | RPJ4 — General purpose I/O / PPS |
| 핀 R11 | RPJ5 — General purpose I/O / PPS |
| 핀 R12 | RPJ6 — General purpose I/O / PPS |
일반적인 애플리케이션
PIC32MZ2064DAK169T-I/HF 적합 용도: 6 애플리케이션s: Industrial HMI Touch Panels, Automotive Instrument Clusters, Medical Patient Monitors, Smart Home Control Panels, Point-of-Sale (POS) Terminals, Avionics Displays.
Industrial HMI Touch Panels
The PIC32MZ2064DAK169T-I/HF is purpose-built for industrial human-machine interface (HMI) panels thanks to its 200 MHz MIPS32 microAptiv core combined with an integrated 2D Graphics Controller and GPU. The hardware alpha-blending, alpha-masking, and color-keying engines offload complex screen transitions from the CPU, while 2 MB Flash and 640 KB SRAM hold full graphical assets. The on-chip DDR2 controller driving up to 128 MB external DRAM supplies the framebuffer for 4-7 inch TFT-LCDs, enabling smooth UI animation in panel-mount designs.
추천
Automotive Instrument Clusters
AEC-Q100 Grade 1 qualification (per Microchip's family datasheet) makes the PIC32MZ2064DAK169T-I/HF well suited to automotive instrument clusters that drive TFT-LCD or segmented displays behind the steering wheel. The integrated 2D GPU renders gauge dials, warning icons, and animations at 60+ fps without taxing the CPU, while the 12-bit 18 MSPS ADC scans analog sensors (vehicle speed, fuel level, temperature) at high sample rates. CAN 2.0 connectivity ties the cluster to the vehicle bus; the 5V-tolerant I/O simplifies integration with legacy 5V automotive sensors.
추천
Medical Patient Monitors
The PIC32MZ2064DAK169T-I/HF's 12-bit 18 MSPS ADC with up to 45 analog inputs allows direct connection to multiple physiological sensors (ECG, SpO2, temperature, respiration), reducing external signal-chain cost in patient monitors. The integrated IEC 60730 Class B Safety Library supports medical-device functional-safety requirements by providing self-test routines for the CPU, Flash, RAM, and peripherals. Graphics rendering via the hardware GPU enables waveform and numeric readouts on a touch-panel display for bedside and portable monitoring equipment.
추천
Smart Home Control Panels
Wi-Fi-connected smart-home control panels benefit from the PIC32MZ2064DAK169T-I/HF's 200 MHz CPU, integrated graphics engine, and High-Speed USB 2.0 for firmware updates. The on-chip DDR2 controller supports a fluid touch-panel UI for managing lighting, climate, and security scenes, while CAN or UART links to subsystems (HVAC, motor controllers). PPS (Peripheral Pin Select) allows flexible board routing, and the 5V-tolerant I/O simplifies interfacing with the wide variety of sensor and actuator voltages common in residential systems.
추천
Point-of-Sale (POS) Terminals
POS terminals demand secure transactions, color touchscreens, and multiple peripheral interfaces, all of which the PIC32MZ2064DAK169T-I/HF can address. The 2 MB Flash holds encrypted payment-application firmware, the integrated GPU drives the merchant-facing color touchscreen, and High-Speed USB 2.0 supports peripherals like printers and barcode scanners. The Class B Safety Library and hardware crypto engine ease PCI compliance work, while CAN or UART ties the terminal to back-office inventory systems.
추천
Avionics Displays
The PIC32MZ2064DAK169T-I/HF's industrial operating temperature range (-40C to +85C for the 'I' grade) and integrated graphics pipeline make it suitable for secondary avionics displays (engine instruments, navigation maps, system-status panels). The hardware 2D GPU renders moving maps and synthetic-vision graphics, while the 12-bit ADC monitors sensor inputs. CAN 2.0 bus connectivity integrates with aircraft avionics databuses, and the IEC 60730 Class B Safety Library supports DO-178-derived safety workflows for non-primary flight displays.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MZ2064DAK169T-I/HF — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MZ2064DAK169-I/HF | PIC32MZ1064DAK169-I/HF |
|---|---|---|---|
| Package | 169-LFBGA (11x11 mm) | 169-LFBGA (11x11 mm) - same | 169-LFBGA (11x11 mm) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same |
| Core | MIPS32 microAptiv @ 200 MHz | MIPS32 microAptiv @ 200 MHz - same | MIPS32 microAptiv @ 200 MHz - same |
| Flash | 2 MB | 2 MB - same | 1 MB (-50%) |
| SRAM | 640 KB | 640 KB - same | 640 KB - same |
| Graphics Controller | Integrated (2D GPU) | Integrated (2D GPU) - same | Integrated (2D GPU) - same |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) - same | -40C to +85C (Industrial) - same |
| Packaging | Tape & Reel ('-T') | Tray (no '-T') | Tray (no '-T') |
| Family Compatibility | PIC32MZ DAK 169-LFBGA | Same family, 169-LFBGA | Same family, 169-LFBGA |
주요 차별점
- On-chip DDR2 controller with hardware GPU (vs PIC32MZ2064DAK169-I/HF)
- Highest-density Flash in PIC32MZ DA family (vs PIC32MZ1064DAK169-I/HF)
- Class B Safety Library + AEC-Q100 Grade 1 in single device (vs STM32F769NIH6)
설계 노트
The PIC32MZ2064DAK169T-I/HF requires multiple supply rails: VDD (core 1.8-3.3V), VDDR (DDR2 I/O 1.8V), VDDIO (digital I/O), AVDD/AVSS (analog), and VUSB (USB 3.3V). Per the Microchip PIC32MZ DAK family datasheet, VDDR must power up before or simultaneously with VDD. Recommended decoupling: 100 nF + 4.7 uF ceramic on every VDD pin, plus 10 uF bulk near the IC. Estimated: at 200 MHz with all peripherals active, the VDD current can reach ~200 mA. A 3.3V LDO with at least 500 mA capacity is recommended upstream.
The 169-LFBGA package has a 0.8 mm ball pitch. Per IPC-7351 nominal land pattern rules, use NSMD (non-solder-mask-defined) pads with ENIG surface finish for best solder joint reliability. Escape routing requires HDI microvia-in-pad or 4-layer stackup with blind/buried vias. Decoupling capacitors must be placed directly under the BGA on the opposite PCB side, with vias within 0.5 mm of the pad edge. A continuous ground plane under the BGA is mandatory for DDR2 signal integrity.
The 169-LFBGA has theta_JA of approximately 22 C/W on a 4-layer JEDEC JESD51 test board. Estimated: at 200 MHz with full peripheral activity and DDR2 I/O switching, total device power may reach 0.7-1.0 W, yielding a ~22 C junction temperature rise above ambient. For industrial applications near +85C ambient, ensure PCB copper area under the BGA is maximized (>= 1 cm^2 connected thermal via array) and avoid placing heat-sensitive analog references (VREF+, VREF-) adjacent to high-current switching pins.
Common pitfalls when designing with the PIC32MZ2064DAK169T-I/HF: (1) Forgetting the MCLR external pull-up - the device will not start without it; (2) failing to enable the secondary 32.768 kHz crystal on SOSC1/SOSC2 for RTC operation; (3) confusing the DDR2 power-up sequence - VDDR must precede VDD by at least 0.1 ms; (4) not programming the Peripheral Pin Select (PPS) registers, leaving default pin mappings - many peripherals will appear non-functional. Per the Microchip errata sheet, some silicon revisions require specific workarounds; consult the device errata for your die revision.
규정 준수 정보
RoHS and REACH compliant per Microchip product page. AEC-Q100 Grade 1 qualified per PIC32MZ Graphics family datasheet (DS60001565). Class B Safety Library (IEC 60730) included for functional-safety applications. Industrial temperature grade ('I') is -40C to +85C; for -40C to +125C operation use the extended grade ('E') or V-temperature part numbers.