STM32F777ZIT6 - 2MB Flash, 216MHz ARM Cortex-M7 MCU | STMicroelectronics
MPN: STM32F777ZIT6 ✓ Aktif| Kwantitas | Harga Satuan | Lengkap |
|---|---|---|
| 1 | $14.1224 | $14,12 |
STM32F777ZIT6 Ringkasan
What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. In the system hierarchy, an MCU sits above a bare microprocessor by including on-chip memory and peripherals, and below a full application processor (like those in smartphones) which typically runs a rich OS. The STM32F777ZIT6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit Flash microcontrollers based on ARM Cortex-M cores. This family is widely used in industrial, consumer, and IoT applications due to its balance of performance, power efficiency, and peripheral integration.
Key features include a Chrom-ART Accelerator for 2D graphics, a hardware cryptographic accelerator (AES, DES, 3DES, SHA-1, SHA-256, MD5), a true random number generator, and a JPEG codec. The device supports a comprehensive set of communication interfaces: 4x I2C, 4x USART, 4x UART, 6x SPI, 3x CAN, 2x USB OTG (FS/HS), 2x SDMMC, 1x FMC (external memory interface), and 2x SAI (serial audio interfaces). It also includes a 12-bit ADC with 3.6 MSPS, a 12-bit DAC, and multiple timers including high-resolution timers.
The STM32F777ZIT6 operates from a 1.7V to 3.6V supply and features a wide temperature range of -40°C to +85°C (industrial grade). It supports various low-power modes (Sleep, Stop, Standby) to optimize energy consumption. The device is RoHS compliant and available in tape and reel packaging.
Typical applications include industrial control systems, motor drives, medical devices, audio processing, and high-end consumer electronics. The dual-bank Flash allows over-the-air firmware updates with minimal downtime, and the cryptographic accelerator enables secure communication protocols.
When designing with this MCU, ensure adequate decoupling on all power pins and follow the recommended layout for the high-speed USB and external memory interfaces. The internal LDO can be bypassed for lower power consumption, but this requires careful power sequencing.
Alternatif penggantian untuk STM32F777ZIT6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian STM32F777ZIT6 (sama faktor bentuk dan footprint) — berbeda di dalam Core, Flash Memory, Operating Temperature, Package, Supply Voltage.
Alat Perbandingan Cepat — Pilih bagian alternatif untuk perbandingan paralel:
STM32F767ZIT6
✗ Habis Stok
$17.6 / Satuan
Lihat Datasheet →STM32F779ZIT6
Kontak untuk harga
Lihat Datasheet →STM32H743ZIT6
✓ Ada di Gudang
$10.65 / Satuan
Lihat Datasheet →STM32F769ZIT6
📋 Alternatif referensi (tidak dalam katalog)
STM32F777ZIT6TR
📋 Alternatif referensi (tidak dalam katalog)
i.MX RT1052
📋 Alternatif referensi (tidak dalam katalog)
STM32F777ZIT6 Rating Maksimal & Karakteristik Listrik
| Core | ARM Cortex-M7 |
| Max Clock Frequency | 216 MHz |
| Flash Memory | 2 MB (dual-bank) |
| SRAM | 512 KB |
| Tegangan Pemuat | 1.7 V to 3.6 V |
| Suhu Kerja | -40°C to +85°C |
| Paket | LQFP-144 (20x20 mm) |
| GPIO Pins | 114 |
| ADC | 3x 12-bit, 3.6 MSPS |
| DAC | 2x 12-bit |
| Communication Interfaces | 4x I2C, 4x USART, 4x UART, 6x SPI, 3x CAN, 2x USB OTG, 2x SDMMC, 1x FMC, 2x SAI |
| Timers | 12x 16-bit, 2x 32-bit, 2x high-resolution |
| Cryptographic Acceleration | AES, DES, 3DES, SHA-1, SHA-256, MD5 |
| DMA | 2x DMA controllers with 16 streams each |
| RoHS | Compliant |
Konfigurasi Pin STM32F777ZIT6
| Pin produk 1 | PE2 — GPIO / FMC_A23 / TRACECLK |
| Pin produk 2 | PE3 — GPIO / FMC_A19 / TRACED0 |
| Pin produk 3 | PE4 — GPIO / FMC_A20 / TRACED1 |
| Pin produk 4 | PE5 — GPIO / FMC_A21 / TRACED2 |
| Pin produk 5 | PE6 — GPIO / FMC_A22 / TRACED3 |
| Pin produk 6 | VBAT — Backup battery supply |
| Pin produk 7 | PC13 — GPIO / RTC_AF1 / WKUP2 |
| Pin produk 8 | PC14 — GPIO / OSC32_IN |
| Pin produk 9 | PC15 — GPIO / OSC32_OUT |
| Pin produk 10 | PF0 — GPIO / FMC_A0 |
| Pin produk 11 | PF1 — GPIO / FMC_A1 |
| Pin produk 12 | PF2 — GPIO / FMC_A2 |
| Pin produk 13 | PF3 — GPIO / FMC_A3 |
| Pin produk 14 | PF4 — GPIO / FMC_A4 |
| Pin produk 15 | PF5 — GPIO / FMC_A5 |
| Pin produk 16 | PF6 — GPIO / FMC_NWAIT / TIM13_CH1 |
| Pin produk 17 | PF7 — GPIO / FMC_NCE4_1 / TIM13_CH2 |
| Pin produk 18 | PF8 — GPIO / FMC_NCE4_2 / TIM14_CH1 |
| Pin produk 19 | PF9 — GPIO / FMC_NCE4_3 / TIM14_CH2 |
| Pin produk 20 | PF10 — GPIO / FMC_NCE4_4 |
| Pin produk 21 | VSS — Ground |
| Pin produk 22 | VDD — Power supply |
| Pin produk 23 | PF11 — GPIO / FMC_SDNCAS |
| Pin produk 24 | PF12 — GPIO / FMC_SDNE0 |
| Pin produk 25 | PF13 — GPIO / FMC_A6 |
| Pin produk 26 | PF14 — GPIO / FMC_A7 |
| Pin produk 27 | PF15 — GPIO / FMC_A8 |
| Pin produk 28 | PG0 — GPIO / FMC_A9 |
| Pin produk 29 | PG1 — GPIO / FMC_A10 |
| Pin produk 30 | PG2 — GPIO / FMC_A11 |
| Pin produk 31 | PG3 — GPIO / FMC_A12 |
| Pin produk 32 | PG4 — GPIO / FMC_A13 |
| Pin produk 33 | PG5 — GPIO / FMC_A14 |
| Pin produk 34 | PG6 — GPIO / FMC_NE1 |
| Pin produk 35 | PG7 — GPIO / FMC_NE2 |
| Pin produk 36 | PG8 — GPIO / FMC_NE3 |
| Pin produk 37 | PG9 — GPIO / FMC_NE4 |
| Pin produk 38 | PG10 — GPIO / FMC_NE5 |
| Pin produk 39 | PG11 — GPIO / FMC_NE6 |
| Pin produk 40 | PG12 — GPIO / FMC_NE7 |
| Pin produk 41 | PG13 — GPIO / FMC_A15 |
| Pin produk 42 | PG14 — GPIO / FMC_A16 |
| Pin produk 43 | PG15 — GPIO / FMC_A17 |
| Pin produk 44 | VSS — Ground |
| Pin produk 45 | VDD — Power supply |
| Pin produk 46 | PD0 — GPIO / FMC_D2 |
| Pin produk 47 | PD1 — GPIO / FMC_D3 |
| Pin produk 48 | PD2 — GPIO / FMC_D4 |
| Pin produk 49 | PD3 — GPIO / FMC_D5 |
| Pin produk 50 | PD4 — GPIO / FMC_D6 |
| Pin produk 51 | PD5 — GPIO / FMC_D7 |
| Pin produk 52 | PD6 — GPIO / FMC_D8 |
| Pin produk 53 | PD7 — GPIO / FMC_D9 |
| Pin produk 54 | PD8 — GPIO / FMC_D10 |
| Pin produk 55 | PD9 — GPIO / FMC_D11 |
| Pin produk 56 | PD10 — GPIO / FMC_D12 |
| Pin produk 57 | PD11 — GPIO / FMC_D13 |
| Pin produk 58 | PD12 — GPIO / FMC_D14 |
| Pin produk 59 | PD13 — GPIO / FMC_D15 |
| Pin produk 60 | PD14 — GPIO / FMC_D0 |
| Pin produk 61 | PD15 — GPIO / FMC_D1 |
| Pin produk 62 | PC0 — GPIO / ADC123_IN10 |
| Pin produk 63 | PC1 — GPIO / ADC123_IN11 |
| Pin produk 64 | PC2 — GPIO / ADC123_IN12 |
| Pin produk 65 | PC3 — GPIO / ADC123_IN13 |
| Pin produk 66 | PC4 — GPIO / ADC12_IN14 |
| Pin produk 67 | PC5 — GPIO / ADC12_IN15 |
| Pin produk 68 | VSS — Ground |
| Pin produk 69 | VDD — Power supply |
| Pin produk 70 | PB2 — GPIO / RTC_AF1 |
| Pin produk 71 | PE7 — GPIO / TIM1_ETR |
| Pin produk 72 | PE8 — GPIO / TIM1_CH1 |
| Pin produk 73 | PE9 — GPIO / TIM1_CH2 |
| Pin produk 74 | PE10 — GPIO / TIM1_CH3 |
| Pin produk 75 | PE11 — GPIO / TIM1_CH4 |
| Pin produk 76 | PE12 — GPIO / TIM1_CH1N |
| Pin produk 77 | PE13 — GPIO / TIM1_CH2N |
| Pin produk 78 | PE14 — GPIO / TIM1_CH3N |
| Pin produk 79 | PE15 — GPIO / TIM1_CH4N |
| Pin produk 80 | PB10 — GPIO / I2C2_SCL / USART3_TX |
| Pin produk 81 | PB11 — GPIO / I2C2_SDA / USART3_RX |
| Pin produk 82 | VSS — Ground |
| Pin produk 83 | VDD — Power supply |
| Pin produk 84 | PB12 — GPIO / SPI2_NSS / I2C2_SMBA |
| Pin produk 85 | PB13 — GPIO / SPI2_SCK / I2C2_SCL |
| Pin produk 86 | PB14 — GPIO / SPI2_MISO / TIM12_CH1 |
| Pin produk 87 | PB15 — GPIO / SPI2_MOSI / TIM12_CH2 |
| Pin produk 88 | PD8 — GPIO / USART3_TX / FMC_D13 |
| Pin produk 89 | PD9 — GPIO / USART3_RX / FMC_D14 |
| Pin produk 90 | PD10 — GPIO / USART3_CK / FMC_D15 |
| Pin produk 91 | PD11 — GPIO / USART3_CTS / FMC_D0 |
| Pin produk 92 | PD12 — GPIO / USART3_RTS / FMC_D1 |
| Pin produk 93 | PD13 — GPIO / USART3_DE / FMC_D2 |
| Pin produk 94 | PD14 — GPIO / USART3_DE / FMC_D3 |
| Pin produk 95 | PD15 — GPIO / USART3_DE / FMC_D4 |
| Pin produk 96 | PC6 — GPIO / I2S2_MCK / USART6_TX |
| Pin produk 97 | PC7 — GPIO / I2S3_MCK / USART6_RX |
| Pin produk 98 | PC8 — GPIO / I2S3_SCK / USART6_CK |
| Pin produk 99 | PC9 — GPIO / I2S3_WS / USART6_CTS |
| Pin produk 100 | PA0 — GPIO / WKUP1 / TIM2_CH1 / ADC123_IN0 |
| Pin produk 101 | PA1 — GPIO / TIM2_CH2 / ADC123_IN1 |
| Pin produk 102 | PA2 — GPIO / TIM2_CH3 / ADC123_IN2 |
| Pin produk 103 | PA3 — GPIO / TIM2_CH4 / ADC123_IN3 |
| Pin produk 104 | VSS — Ground |
| Pin produk 105 | VDD — Power supply |
| Pin produk 106 | PA4 — GPIO / SPI1_NSS / DAC_OUT1 |
| Pin produk 107 | PA5 — GPIO / SPI1_SCK / DAC_OUT2 |
| Pin produk 108 | PA6 — GPIO / SPI1_MISO / TIM13_CH1 |
| Pin produk 109 | PA7 — GPIO / SPI1_MOSI / TIM14_CH1 |
| Pin produk 110 | PA8 — GPIO / MCO1 / TIM1_CH1 |
| Pin produk 111 | PA9 — GPIO / USB_OTG_FS_VBUS / TIM1_CH2 |
| Pin produk 112 | PA10 — GPIO / USB_OTG_FS_ID / TIM1_CH3 |
| Pin produk 113 | PA11 — GPIO / USB_OTG_FS_DM / TIM1_CH4 |
| Pin produk 114 | PA12 — GPIO / USB_OTG_FS_DP / TIM1_ETR |
| Pin produk 115 | PA13 — GPIO / SWDIO / JTMS |
| Pin produk 116 | PA14 — GPIO / SWCLK / JTCK |
| Pin produk 117 | PA15 — GPIO / JTDI / TIM2_CH1 |
| Pin produk 118 | PC10 — GPIO / I2S3_SCK / USART4_TX |
| Pin produk 119 | PC11 — GPIO / I2S3_WS / USART4_RX |
| Pin produk 120 | PC12 — GPIO / I2S3_SD / USART4_CK |
| Pin produk 121 | PD0 — GPIO / FMC_D2 / USART2_CTS |
| Pin produk 122 | PD1 — GPIO / FMC_D3 / USART2_RTS |
| Pin produk 123 | PD2 — GPIO / FMC_D4 / USART2_DE |
| Pin produk 124 | PD3 — GPIO / FMC_D5 / USART2_TX |
| Pin produk 125 | PD4 — GPIO / FMC_D6 / USART2_RX |
| Pin produk 126 | PD5 — GPIO / FMC_D7 / USART2_CK |
| Pin produk 127 | PD6 — GPIO / FMC_D8 / USART2_CTS |
| Pin produk 128 | PD7 — GPIO / FMC_D9 / USART2_RTS |
| Pin produk 129 | VSS — Ground |
| Pin produk 130 | VDD — Power supply |
| Pin produk 131 | PB0 — GPIO / ADC12_IN8 / TIM3_CH3 |
| Pin produk 132 | PB1 — GPIO / ADC12_IN9 / TIM3_CH4 |
| Pin produk 133 | PB3 — GPIO / JTDO / SPI1_SCK |
| Pin produk 134 | PB4 — GPIO / NJTRST / SPI1_MISO |
| Pin produk 135 | PB5 — GPIO / SPI1_MOSI / I2C1_SMBA |
| Pin produk 136 | PB6 — GPIO / I2C1_SCL / USART1_TX |
| Pin produk 137 | PB7 — GPIO / I2C1_SDA / USART1_RX |
| Pin produk 138 | PB8 — GPIO / I2C1_SCL / CAN1_RX |
| Pin produk 139 | PB9 — GPIO / I2C1_SDA / CAN1_TX |
| Pin produk 140 | PE0 — GPIO / TIM4_ETR / FMC_NBL0 |
| Pin produk 141 | PE1 — GPIO / TIM4_CH1 / FMC_NBL1 |
| Pin produk 142 | VSS — Ground |
| Pin produk 143 | VDD — Power supply |
| Pin produk 144 | NRST — Reset (active low) |
Aplikasi Umum
STM32F777ZIT6 cocok untuk 6 aplikasis: Industrial Control Systems, Medical Devices, Audio Processing, IoT Gateways, Motor Drives, Human-Machine Interface (HMI).
Industrial Control Systems
The STM32F777ZIT6 is ideal for industrial control systems due to its high-performance 216 MHz Cortex-M7 core, extensive communication interfaces (CAN, Ethernet, UART), and robust timer peripherals. It can handle complex PLC logic, motor control, and real-time monitoring. The dual-bank Flash enables safe firmware updates in the field, while the cryptographic accelerator secures communication protocols. Its wide operating temperature range (-40°C to +85°C) ensures reliability in harsh industrial environments. The 12-bit ADC with 3.6 MSPS provides fast and accurate analog signal acquisition for sensors and feedback loops. The FMC interface allows connection to external memory for data logging. With 114 GPIOs, it can interface with numerous sensors and actuators. The device's low-power modes help reduce energy consumption in always-on industrial nodes. The STM32CubeF7 firmware package includes middleware for industrial protocols like Modbus and CANopen, accelerating development.
Direkomendasikan
Medical Devices
The STM32F777ZIT6 is well-suited for medical devices such as patient monitors, infusion pumps, and diagnostic equipment. Its high processing power enables real-time signal processing for ECG, EEG, and imaging. The cryptographic accelerator ensures secure data transmission and patient privacy compliance. The device's multiple ADCs and DACs interface with biosensors and actuators. The SAI interfaces support audio for alarms and voice guidance. The low-power modes extend battery life in portable devices. The wide supply voltage range (1.7V-3.6V) allows operation from single-cell batteries. The device's reliability and long-term availability make it suitable for medical-grade products. The STM32CubeF7 includes safety documentation and middleware for medical applications. The 2 MB Flash provides ample space for complex algorithms and patient data logging. The FMC interface can connect to external memory for larger data storage. The device's temperature range covers clinical environments.
Direkomendasikan
Audio Processing
The STM32F777ZIT6 excels in audio processing applications such as audio interfaces, effects processors, and smart speakers. Its 216 MHz Cortex-M7 core with DSP instructions handles real-time audio codecs (MP3, AAC, Opus) and effects. The two SAI interfaces connect to multiple audio codecs and digital microphones. The USB OTG HS supports audio streaming to/from hosts. The Chrom-ART Accelerator can drive graphical user interfaces for audio equipment. The device's high-speed ADC can sample analog audio for processing. The cryptographic accelerator enables secure audio streaming and DRM. The 512 KB SRAM provides ample buffering for audio data. The device's low latency and deterministic timing make it suitable for professional audio. The STM32CubeF7 includes audio middleware like PDM2PCM for MEMS microphones. The device's power efficiency is beneficial for portable audio devices.
Direkomendasikan
IoT Gateways
The STM32F777ZIT6 is an excellent choice for IoT gateways that aggregate data from multiple sensors and communicate with the cloud. Its Ethernet MAC, USB OTG, and SDMMC interfaces enable wired and wireless connectivity. The cryptographic accelerator secures TLS/DTLS connections and data encryption. The device's multiple UARTs and SPIs interface with various wireless modules (Wi-Fi, LoRa, Zigbee). The 2 MB Flash stores firmware and configuration data. The low-power modes allow energy-efficient operation. The device's processing power handles protocol conversion and edge computing. The FMC interface can connect to external memory for data buffering. The device's wide temperature range suits outdoor installations. The STM32CubeF7 includes LwIP and FreeRTOS middleware for network applications. The device's security features protect against cyber threats.
Direkomendasikan
Motor Drives
The STM32F777ZIT6 is designed for advanced motor control applications, including brushless DC (BLDC), permanent magnet synchronous (PMSM), and stepper motors. Its high-speed 216 MHz core executes complex FOC algorithms with ease. The high-resolution timers generate precise PWM signals for inverter control. The 12-bit ADC with 3.6 MSPS samples phase currents and voltages for feedback. The device's multiple timers can handle encoder and Hall sensor inputs. The CAN interface enables communication with motor drives in industrial networks. The cryptographic accelerator secures firmware updates and prevents IP theft. The device's temperature range and robustness suit industrial motor drives. The STM32CubeF7 includes motor control libraries (MC SDK) for rapid development. The device's low latency ensures stable control loops. The FMC interface can connect to external memory for data logging.
Direkomendasikan
Human-Machine Interface (HMI)
The STM32F777ZIT6 is ideal for HMI applications such as industrial panels, smart home controllers, and point-of-sale terminals. Its Chrom-ART Accelerator offloads 2D graphics rendering from the CPU, enabling smooth animations and rich user interfaces. The device's TFT-LCD controller (in F769 variant) or external display via FMC supports high-resolution screens. The SAI interfaces drive audio for user feedback. The multiple touch controllers can be interfaced via I2C or SPI. The cryptographic accelerator secures user data and communication. The device's processing power handles complex UI logic and multitasking. The 2 MB Flash stores UI assets and fonts. The device's low-power modes extend battery life in portable HMIs. The STM32CubeF7 includes TouchGFX and STemWin middleware for GUI development. The device's wide temperature range suits various environments.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk STM32F777ZIT6 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | STM32F767ZIT6 | STM32F769ZIT6 | STM32F777ZIT6TR | STM32H743ZIT6 |
|---|---|---|---|---|---|
| Package | LQFP-144 | LQFP-144 | LQFP-144 | LQFP-144 | LQFP-144 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 |
| Max Clock Frequency | 216 MHz | 216 MHz | 216 MHz | 216 MHz | 480 MHz |
| Flash Memory | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 1 MB |
| Cryptographic Accelerator | Yes | No | Yes | Yes | Yes |
| TFT-LCD Controller | No | No | Yes | No | Yes |
| Pin Compatibility | Reference | Pin-compatible | Pin-compatible | Pin-compatible | Not pin-compatible |
Diferensiator Kunci
- Hardware cryptographic accelerator (vsSTM32F767ZIT6)
- True random number generator (TRNG) (vsSTM32F767ZIT6)
- Higher performance than STM32F4 series (vsSTM32F407ZIT6)
Catatan Desain
The STM32F777ZIT6 requires a stable 3.3V supply with adequate decoupling. Place a 100nF ceramic capacitor close to each VDD pin and a 4.7uF bulk capacitor at the power entry. The VDDA pin should be filtered with a ferrite bead and 1uF capacitor to reduce noise for the ADC. If using the internal regulator, ensure the VCAP pins have the recommended 2.2uF capacitor to ground. For low-power operation, consider using the bypass mode to reduce quiescent current.
For high-speed interfaces like USB OTG HS and Ethernet, follow the layout guidelines in the STM32F7 hardware development application note (AN4666). Keep traces short and matched for differential pairs. Use a solid ground plane and avoid splitting it under the MCU. For the crystal oscillator, place it close to the OSC_IN/OSC_OUT pins with proper load capacitors and a ground guard ring to minimize noise coupling.
Ensure the boot pins (BOOT0, BOOT1) are configured correctly to boot from Flash. Do not leave the NRST pin floating; connect a 100nF capacitor to ground. When using the FMC interface, verify the timing parameters for the external memory. The dual-bank Flash requires proper configuration to enable read-while-write; refer to the reference manual (RM0385) for the option bytes. Also, note that the STM32F777ZIT6 is not 5V tolerant on most pins, so level shifting is needed for 5V logic.
Informasi Konformitas
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified (industrial grade only).
