STM32F777ZIT6 - 2MB Flash, 216MHz ARM Cortex-M7 MCU | STMicroelectronics
部品番号: STM32F777ZIT6 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $14.1224 | $14.12 |
STM32F777ZIT6 概要
What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. In the system hierarchy, an MCU sits above a bare microprocessor by including on-chip memory and peripherals, and below a full application processor (like those in smartphones) which typically runs a rich OS. The STM32F777ZIT6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit Flash microcontrollers based on ARM Cortex-M cores. This family is widely used in industrial, consumer, and IoT applications due to its balance of performance, power efficiency, and peripheral integration.
Key features include a Chrom-ART Accelerator for 2D graphics, a hardware cryptographic accelerator (AES, DES, 3DES, SHA-1, SHA-256, MD5), a true random number generator, and a JPEG codec. The device supports a comprehensive set of communication interfaces: 4x I2C, 4x USART, 4x UART, 6x SPI, 3x CAN, 2x USB OTG (FS/HS), 2x SDMMC, 1x FMC (external memory interface), and 2x SAI (serial audio interfaces). It also includes a 12-bit ADC with 3.6 MSPS, a 12-bit DAC, and multiple timers including high-resolution timers.
The STM32F777ZIT6 operates from a 1.7V to 3.6V supply and features a wide temperature range of -40°C to +85°C (industrial grade). It supports various low-power modes (Sleep, Stop, Standby) to optimize energy consumption. The device is RoHS compliant and available in tape and reel packaging.
Typical applications include industrial control systems, motor drives, medical devices, audio processing, and high-end consumer electronics. The dual-bank Flash allows over-the-air firmware updates with minimal downtime, and the cryptographic accelerator enables secure communication protocols.
When designing with this MCU, ensure adequate decoupling on all power pins and follow the recommended layout for the high-speed USB and external memory interfaces. The internal LDO can be bypassed for lower power consumption, but this requires careful power sequencing.
ドロップイン代替品: STM32F777ZIT6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32F777ZIT6 （同一形状・フットプリント） — 相違点: Core, Flash Memory, Operating Temperature, Package, Supply Voltage.
クイック比較ツール — 並列比較する代替部品を選択:
STM32F767ZIT6
✓ 在庫あり
$17.6 / 個
データシートを見る →STM32F779ZIT6
✓ 在庫あり
$11.75 / 個
データシートを見る →STM32H743ZIT6
✓ 在庫あり
$10.65 / 個
データシートを見る →STM32F769ZIT6
📋 参考代替品（カタログ未掲載）
STM32F777ZIT6TR
📋 参考代替品（カタログ未掲載）
i.MX RT1052
📋 参考代替品（カタログ未掲載）
STM32F777ZIT6 最大定格＆電気的特性
| Core | ARM Cortex-M7 |
| Max Clock Frequency | 216 MHz |
| Flash Memory | 2 MB (dual-bank) |
| SRAM | 512 KB |
| 電源電圧 | 1.7 V to 3.6 V |
| 動作温度 | -40°C to +85°C |
| パッケージ | LQFP-144 (20x20 mm) |
| GPIO Pins | 114 |
| ADC | 3x 12-bit, 3.6 MSPS |
| DAC | 2x 12-bit |
| Communication Interfaces | 4x I2C, 4x USART, 4x UART, 6x SPI, 3x CAN, 2x USB OTG, 2x SDMMC, 1x FMC, 2x SAI |
| Timers | 12x 16-bit, 2x 32-bit, 2x high-resolution |
| Cryptographic Acceleration | AES, DES, 3DES, SHA-1, SHA-256, MD5 |
| DMA | 2x DMA controllers with 16 streams each |
| RoHS | Compliant |
STM32F777ZIT6 ピン構成
| ピン 1 | PE2 — GPIO / FMC_A23 / TRACECLK |
| ピン 2 | PE3 — GPIO / FMC_A19 / TRACED0 |
| ピン 3 | PE4 — GPIO / FMC_A20 / TRACED1 |
| ピン 4 | PE5 — GPIO / FMC_A21 / TRACED2 |
| ピン 5 | PE6 — GPIO / FMC_A22 / TRACED3 |
| ピン 6 | VBAT — Backup battery supply |
| ピン 7 | PC13 — GPIO / RTC_AF1 / WKUP2 |
| ピン 8 | PC14 — GPIO / OSC32_IN |
| ピン 9 | PC15 — GPIO / OSC32_OUT |
| ピン 10 | PF0 — GPIO / FMC_A0 |
| ピン 11 | PF1 — GPIO / FMC_A1 |
| ピン 12 | PF2 — GPIO / FMC_A2 |
| ピン 13 | PF3 — GPIO / FMC_A3 |
| ピン 14 | PF4 — GPIO / FMC_A4 |
| ピン 15 | PF5 — GPIO / FMC_A5 |
| ピン 16 | PF6 — GPIO / FMC_NWAIT / TIM13_CH1 |
| ピン 17 | PF7 — GPIO / FMC_NCE4_1 / TIM13_CH2 |
| ピン 18 | PF8 — GPIO / FMC_NCE4_2 / TIM14_CH1 |
| ピン 19 | PF9 — GPIO / FMC_NCE4_3 / TIM14_CH2 |
| ピン 20 | PF10 — GPIO / FMC_NCE4_4 |
| ピン 21 | VSS — Ground |
| ピン 22 | VDD — Power supply |
| ピン 23 | PF11 — GPIO / FMC_SDNCAS |
| ピン 24 | PF12 — GPIO / FMC_SDNE0 |
| ピン 25 | PF13 — GPIO / FMC_A6 |
| ピン 26 | PF14 — GPIO / FMC_A7 |
| ピン 27 | PF15 — GPIO / FMC_A8 |
| ピン 28 | PG0 — GPIO / FMC_A9 |
| ピン 29 | PG1 — GPIO / FMC_A10 |
| ピン 30 | PG2 — GPIO / FMC_A11 |
| ピン 31 | PG3 — GPIO / FMC_A12 |
| ピン 32 | PG4 — GPIO / FMC_A13 |
| ピン 33 | PG5 — GPIO / FMC_A14 |
| ピン 34 | PG6 — GPIO / FMC_NE1 |
| ピン 35 | PG7 — GPIO / FMC_NE2 |
| ピン 36 | PG8 — GPIO / FMC_NE3 |
| ピン 37 | PG9 — GPIO / FMC_NE4 |
| ピン 38 | PG10 — GPIO / FMC_NE5 |
| ピン 39 | PG11 — GPIO / FMC_NE6 |
| ピン 40 | PG12 — GPIO / FMC_NE7 |
| ピン 41 | PG13 — GPIO / FMC_A15 |
| ピン 42 | PG14 — GPIO / FMC_A16 |
| ピン 43 | PG15 — GPIO / FMC_A17 |
| ピン 44 | VSS — Ground |
| ピン 45 | VDD — Power supply |
| ピン 46 | PD0 — GPIO / FMC_D2 |
| ピン 47 | PD1 — GPIO / FMC_D3 |
| ピン 48 | PD2 — GPIO / FMC_D4 |
| ピン 49 | PD3 — GPIO / FMC_D5 |
| ピン 50 | PD4 — GPIO / FMC_D6 |
| ピン 51 | PD5 — GPIO / FMC_D7 |
| ピン 52 | PD6 — GPIO / FMC_D8 |
| ピン 53 | PD7 — GPIO / FMC_D9 |
| ピン 54 | PD8 — GPIO / FMC_D10 |
| ピン 55 | PD9 — GPIO / FMC_D11 |
| ピン 56 | PD10 — GPIO / FMC_D12 |
| ピン 57 | PD11 — GPIO / FMC_D13 |
| ピン 58 | PD12 — GPIO / FMC_D14 |
| ピン 59 | PD13 — GPIO / FMC_D15 |
| ピン 60 | PD14 — GPIO / FMC_D0 |
| ピン 61 | PD15 — GPIO / FMC_D1 |
| ピン 62 | PC0 — GPIO / ADC123_IN10 |
| ピン 63 | PC1 — GPIO / ADC123_IN11 |
| ピン 64 | PC2 — GPIO / ADC123_IN12 |
| ピン 65 | PC3 — GPIO / ADC123_IN13 |
| ピン 66 | PC4 — GPIO / ADC12_IN14 |
| ピン 67 | PC5 — GPIO / ADC12_IN15 |
| ピン 68 | VSS — Ground |
| ピン 69 | VDD — Power supply |
| ピン 70 | PB2 — GPIO / RTC_AF1 |
| ピン 71 | PE7 — GPIO / TIM1_ETR |
| ピン 72 | PE8 — GPIO / TIM1_CH1 |
| ピン 73 | PE9 — GPIO / TIM1_CH2 |
| ピン 74 | PE10 — GPIO / TIM1_CH3 |
| ピン 75 | PE11 — GPIO / TIM1_CH4 |
| ピン 76 | PE12 — GPIO / TIM1_CH1N |
| ピン 77 | PE13 — GPIO / TIM1_CH2N |
| ピン 78 | PE14 — GPIO / TIM1_CH3N |
| ピン 79 | PE15 — GPIO / TIM1_CH4N |
| ピン 80 | PB10 — GPIO / I2C2_SCL / USART3_TX |
| ピン 81 | PB11 — GPIO / I2C2_SDA / USART3_RX |
| ピン 82 | VSS — Ground |
| ピン 83 | VDD — Power supply |
| ピン 84 | PB12 — GPIO / SPI2_NSS / I2C2_SMBA |
| ピン 85 | PB13 — GPIO / SPI2_SCK / I2C2_SCL |
| ピン 86 | PB14 — GPIO / SPI2_MISO / TIM12_CH1 |
| ピン 87 | PB15 — GPIO / SPI2_MOSI / TIM12_CH2 |
| ピン 88 | PD8 — GPIO / USART3_TX / FMC_D13 |
| ピン 89 | PD9 — GPIO / USART3_RX / FMC_D14 |
| ピン 90 | PD10 — GPIO / USART3_CK / FMC_D15 |
| ピン 91 | PD11 — GPIO / USART3_CTS / FMC_D0 |
| ピン 92 | PD12 — GPIO / USART3_RTS / FMC_D1 |
| ピン 93 | PD13 — GPIO / USART3_DE / FMC_D2 |
| ピン 94 | PD14 — GPIO / USART3_DE / FMC_D3 |
| ピン 95 | PD15 — GPIO / USART3_DE / FMC_D4 |
| ピン 96 | PC6 — GPIO / I2S2_MCK / USART6_TX |
| ピン 97 | PC7 — GPIO / I2S3_MCK / USART6_RX |
| ピン 98 | PC8 — GPIO / I2S3_SCK / USART6_CK |
| ピン 99 | PC9 — GPIO / I2S3_WS / USART6_CTS |
| ピン 100 | PA0 — GPIO / WKUP1 / TIM2_CH1 / ADC123_IN0 |
| ピン 101 | PA1 — GPIO / TIM2_CH2 / ADC123_IN1 |
| ピン 102 | PA2 — GPIO / TIM2_CH3 / ADC123_IN2 |
| ピン 103 | PA3 — GPIO / TIM2_CH4 / ADC123_IN3 |
| ピン 104 | VSS — Ground |
| ピン 105 | VDD — Power supply |
| ピン 106 | PA4 — GPIO / SPI1_NSS / DAC_OUT1 |
| ピン 107 | PA5 — GPIO / SPI1_SCK / DAC_OUT2 |
| ピン 108 | PA6 — GPIO / SPI1_MISO / TIM13_CH1 |
| ピン 109 | PA7 — GPIO / SPI1_MOSI / TIM14_CH1 |
| ピン 110 | PA8 — GPIO / MCO1 / TIM1_CH1 |
| ピン 111 | PA9 — GPIO / USB_OTG_FS_VBUS / TIM1_CH2 |
| ピン 112 | PA10 — GPIO / USB_OTG_FS_ID / TIM1_CH3 |
| ピン 113 | PA11 — GPIO / USB_OTG_FS_DM / TIM1_CH4 |
| ピン 114 | PA12 — GPIO / USB_OTG_FS_DP / TIM1_ETR |
| ピン 115 | PA13 — GPIO / SWDIO / JTMS |
| ピン 116 | PA14 — GPIO / SWCLK / JTCK |
| ピン 117 | PA15 — GPIO / JTDI / TIM2_CH1 |
| ピン 118 | PC10 — GPIO / I2S3_SCK / USART4_TX |
| ピン 119 | PC11 — GPIO / I2S3_WS / USART4_RX |
| ピン 120 | PC12 — GPIO / I2S3_SD / USART4_CK |
| ピン 121 | PD0 — GPIO / FMC_D2 / USART2_CTS |
| ピン 122 | PD1 — GPIO / FMC_D3 / USART2_RTS |
| ピン 123 | PD2 — GPIO / FMC_D4 / USART2_DE |
| ピン 124 | PD3 — GPIO / FMC_D5 / USART2_TX |
| ピン 125 | PD4 — GPIO / FMC_D6 / USART2_RX |
| ピン 126 | PD5 — GPIO / FMC_D7 / USART2_CK |
| ピン 127 | PD6 — GPIO / FMC_D8 / USART2_CTS |
| ピン 128 | PD7 — GPIO / FMC_D9 / USART2_RTS |
| ピン 129 | VSS — Ground |
| ピン 130 | VDD — Power supply |
| ピン 131 | PB0 — GPIO / ADC12_IN8 / TIM3_CH3 |
| ピン 132 | PB1 — GPIO / ADC12_IN9 / TIM3_CH4 |
| ピン 133 | PB3 — GPIO / JTDO / SPI1_SCK |
| ピン 134 | PB4 — GPIO / NJTRST / SPI1_MISO |
| ピン 135 | PB5 — GPIO / SPI1_MOSI / I2C1_SMBA |
| ピン 136 | PB6 — GPIO / I2C1_SCL / USART1_TX |
| ピン 137 | PB7 — GPIO / I2C1_SDA / USART1_RX |
| ピン 138 | PB8 — GPIO / I2C1_SCL / CAN1_RX |
| ピン 139 | PB9 — GPIO / I2C1_SDA / CAN1_TX |
| ピン 140 | PE0 — GPIO / TIM4_ETR / FMC_NBL0 |
| ピン 141 | PE1 — GPIO / TIM4_CH1 / FMC_NBL1 |
| ピン 142 | VSS — Ground |
| ピン 143 | VDD — Power supply |
| ピン 144 | NRST — Reset (active low) |
主な用途
STM32F777ZIT6 の用途: 6 件s: Industrial Control Systems, Medical Devices, Audio Processing, IoT Gateways, Motor Drives, Human-Machine Interface (HMI).
Industrial Control Systems
The STM32F777ZIT6 is ideal for industrial control systems due to its high-performance 216 MHz Cortex-M7 core, extensive communication interfaces (CAN, Ethernet, UART), and robust timer peripherals. It can handle complex PLC logic, motor control, and real-time monitoring. The dual-bank Flash enables safe firmware updates in the field, while the cryptographic accelerator secures communication protocols. Its wide operating temperature range (-40°C to +85°C) ensures reliability in harsh industrial environments. The 12-bit ADC with 3.6 MSPS provides fast and accurate analog signal acquisition for sensors and feedback loops. The FMC interface allows connection to external memory for data logging. With 114 GPIOs, it can interface with numerous sensors and actuators. The device's low-power modes help reduce energy consumption in always-on industrial nodes. The STM32CubeF7 firmware package includes middleware for industrial protocols like Modbus and CANopen, accelerating development.
おすすめ
Medical Devices
The STM32F777ZIT6 is well-suited for medical devices such as patient monitors, infusion pumps, and diagnostic equipment. Its high processing power enables real-time signal processing for ECG, EEG, and imaging. The cryptographic accelerator ensures secure data transmission and patient privacy compliance. The device's multiple ADCs and DACs interface with biosensors and actuators. The SAI interfaces support audio for alarms and voice guidance. The low-power modes extend battery life in portable devices. The wide supply voltage range (1.7V-3.6V) allows operation from single-cell batteries. The device's reliability and long-term availability make it suitable for medical-grade products. The STM32CubeF7 includes safety documentation and middleware for medical applications. The 2 MB Flash provides ample space for complex algorithms and patient data logging. The FMC interface can connect to external memory for larger data storage. The device's temperature range covers clinical environments.
おすすめ
Audio Processing
The STM32F777ZIT6 excels in audio processing applications such as audio interfaces, effects processors, and smart speakers. Its 216 MHz Cortex-M7 core with DSP instructions handles real-time audio codecs (MP3, AAC, Opus) and effects. The two SAI interfaces connect to multiple audio codecs and digital microphones. The USB OTG HS supports audio streaming to/from hosts. The Chrom-ART Accelerator can drive graphical user interfaces for audio equipment. The device's high-speed ADC can sample analog audio for processing. The cryptographic accelerator enables secure audio streaming and DRM. The 512 KB SRAM provides ample buffering for audio data. The device's low latency and deterministic timing make it suitable for professional audio. The STM32CubeF7 includes audio middleware like PDM2PCM for MEMS microphones. The device's power efficiency is beneficial for portable audio devices.
おすすめ
IoT Gateways
The STM32F777ZIT6 is an excellent choice for IoT gateways that aggregate data from multiple sensors and communicate with the cloud. Its Ethernet MAC, USB OTG, and SDMMC interfaces enable wired and wireless connectivity. The cryptographic accelerator secures TLS/DTLS connections and data encryption. The device's multiple UARTs and SPIs interface with various wireless modules (Wi-Fi, LoRa, Zigbee). The 2 MB Flash stores firmware and configuration data. The low-power modes allow energy-efficient operation. The device's processing power handles protocol conversion and edge computing. The FMC interface can connect to external memory for data buffering. The device's wide temperature range suits outdoor installations. The STM32CubeF7 includes LwIP and FreeRTOS middleware for network applications. The device's security features protect against cyber threats.
おすすめ
Motor Drives
The STM32F777ZIT6 is designed for advanced motor control applications, including brushless DC (BLDC), permanent magnet synchronous (PMSM), and stepper motors. Its high-speed 216 MHz core executes complex FOC algorithms with ease. The high-resolution timers generate precise PWM signals for inverter control. The 12-bit ADC with 3.6 MSPS samples phase currents and voltages for feedback. The device's multiple timers can handle encoder and Hall sensor inputs. The CAN interface enables communication with motor drives in industrial networks. The cryptographic accelerator secures firmware updates and prevents IP theft. The device's temperature range and robustness suit industrial motor drives. The STM32CubeF7 includes motor control libraries (MC SDK) for rapid development. The device's low latency ensures stable control loops. The FMC interface can connect to external memory for data logging.
おすすめ
Human-Machine Interface (HMI)
The STM32F777ZIT6 is ideal for HMI applications such as industrial panels, smart home controllers, and point-of-sale terminals. Its Chrom-ART Accelerator offloads 2D graphics rendering from the CPU, enabling smooth animations and rich user interfaces. The device's TFT-LCD controller (in F769 variant) or external display via FMC supports high-resolution screens. The SAI interfaces drive audio for user feedback. The multiple touch controllers can be interfaced via I2C or SPI. The cryptographic accelerator secures user data and communication. The device's processing power handles complex UI logic and multitasking. The 2 MB Flash stores UI assets and fonts. The device's low-power modes extend battery life in portable HMIs. The STM32CubeF7 includes TouchGFX and STemWin middleware for GUI development. The device's wide temperature range suits various environments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32F777ZIT6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32F767ZIT6 | STM32F769ZIT6 | STM32F777ZIT6TR | STM32H743ZIT6 |
|---|---|---|---|---|---|
| Package | LQFP-144 | LQFP-144 | LQFP-144 | LQFP-144 | LQFP-144 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 |
| Max Clock Frequency | 216 MHz | 216 MHz | 216 MHz | 216 MHz | 480 MHz |
| Flash Memory | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 1 MB |
| Cryptographic Accelerator | Yes | No | Yes | Yes | Yes |
| TFT-LCD Controller | No | No | Yes | No | Yes |
| Pin Compatibility | Reference | Pin-compatible | Pin-compatible | Pin-compatible | Not pin-compatible |
主な差別化要因
- Hardware cryptographic accelerator （vs STM32F767ZIT6)
- True random number generator (TRNG) （vs STM32F767ZIT6)
- Higher performance than STM32F4 series （vs STM32F407ZIT6)
設計ノート
The STM32F777ZIT6 requires a stable 3.3V supply with adequate decoupling. Place a 100nF ceramic capacitor close to each VDD pin and a 4.7uF bulk capacitor at the power entry. The VDDA pin should be filtered with a ferrite bead and 1uF capacitor to reduce noise for the ADC. If using the internal regulator, ensure the VCAP pins have the recommended 2.2uF capacitor to ground. For low-power operation, consider using the bypass mode to reduce quiescent current.
For high-speed interfaces like USB OTG HS and Ethernet, follow the layout guidelines in the STM32F7 hardware development application note (AN4666). Keep traces short and matched for differential pairs. Use a solid ground plane and avoid splitting it under the MCU. For the crystal oscillator, place it close to the OSC_IN/OSC_OUT pins with proper load capacitors and a ground guard ring to minimize noise coupling.
Ensure the boot pins (BOOT0, BOOT1) are configured correctly to boot from Flash. Do not leave the NRST pin floating; connect a 100nF capacitor to ground. When using the FMC interface, verify the timing parameters for the external memory. The dual-bank Flash requires proper configuration to enable read-while-write; refer to the reference manual (RM0385) for the option bytes. Also, note that the STM32F777ZIT6 is not 5V tolerant on most pins, so level shifting is needed for 5V logic.
コンプライアンス情報
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified (industrial grade only).
