SN65HVD53D vs SN65HVD51D 比較

詳細な並列比較: SN65HVD53D メーカー: Texas Instruments および SN65HVD51D メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

仕様比較

パラメータ SN65HVD53D SN65HVD51D
ブランド Texas Instruments Texas Instruments
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Device Type Full-duplex RS-485 / RS-422 transceiver with enables —
Number of Drivers / Receivers 1 / 1 —
Driver Enable Polarity Active-high —
Receiver Enable Polarity Active-low —
Unit Load Option 1/8 unit-load option available (up to 256 nodes on the bus) —
Maximum Nodes on Bus 256 nodes —
Bus Pin ESD Protection Exceeds 15 kV HBM —
Driver Output Transition Time Options 1 Mbps, 5 Mbps and 25 Mbps signaling rates —
Standby Current 1 uA (both driver and receiver disabled) Less than 1 µA
Receiver Output Glitch-free —
Standards Supported RS-485, RS-422 —
Supply Voltage Range [DATA_NEEDED: supply voltage range] 4.5 V to 5.5 V
Maximum Data Rate (this device) [DATA_NEEDED: maximum data rate for SN65HVD53D] —
Driver Output Current [DATA_NEEDED: high-output driver current] —
Receiver Sensitivity [DATA_NEEDED: receiver input sensitivity] —
動作温度範囲 -40 C to +85 C -40 °C to 85 °C
パッケージ SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch 8-pin SOIC (D)
実装タイプ Surface mount Surface mount
RoHS ステータス [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
Product Type — RS-422/RS-485 full-duplex transceiver
Driver Count — 1 driver
Receiver Count — 1 receiver
Maximum Signaling Rate — 5 Mbps
Interface Standards — RS-422 and RS-485
Duplex Mode — Full-duplex
Receiver Unit Load — 1/8 unit load
Maximum Bus Nodes — Up to 256 nodes
Bus-Pin ESD Protection — Exceeds 15 kV HBM
Available Driver Transition Rates — 1 Mbps, 5 Mbps, and 25 Mbps
Enable Architecture — Fully enabled; no external enable pins
REACH Status — [DATA_NEEDED: REACH compliance status]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼