SN65HVD53D vs SN65HVD51D 比較

詳細並排比較 SN65HVD53D 由 Texas Instruments 與 SN65HVD51D 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

規格比較

參數 SN65HVD53D SN65HVD51D
品牌 Texas Instruments Texas Instruments
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Device Type Full-duplex RS-485 / RS-422 transceiver with enables —
Number of Drivers / Receivers 1 / 1 —
Driver Enable Polarity Active-high —
Receiver Enable Polarity Active-low —
Unit Load Option 1/8 unit-load option available (up to 256 nodes on the bus) —
Maximum Nodes on Bus 256 nodes —
Bus Pin ESD Protection Exceeds 15 kV HBM —
Driver Output Transition Time Options 1 Mbps, 5 Mbps and 25 Mbps signaling rates —
Standby Current 1 uA (both driver and receiver disabled) Less than 1 µA
Receiver Output Glitch-free —
Standards Supported RS-485, RS-422 —
Supply Voltage Range [DATA_NEEDED: supply voltage range] 4.5 V to 5.5 V
Maximum Data Rate (this device) [DATA_NEEDED: maximum data rate for SN65HVD53D] —
Driver Output Current [DATA_NEEDED: high-output driver current] —
Receiver Sensitivity [DATA_NEEDED: receiver input sensitivity] —
工作溫度範圍 -40 C to +85 C -40 °C to 85 °C
封裝 SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch 8-pin SOIC (D)
安裝類型 Surface mount Surface mount
RoHS 狀態 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
Product Type — RS-422/RS-485 full-duplex transceiver
Driver Count — 1 driver
Receiver Count — 1 receiver
Maximum Signaling Rate — 5 Mbps
Interface Standards — RS-422 and RS-485
Duplex Mode — Full-duplex
Receiver Unit Load — 1/8 unit load
Maximum Bus Nodes — Up to 256 nodes
Bus-Pin ESD Protection — Exceeds 15 kV HBM
Available Driver Transition Rates — 1 Mbps, 5 Mbps, and 25 Mbps
Enable Architecture — Fully enabled; no external enable pins
REACH Status — [DATA_NEEDED: REACH compliance status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價