SN65HVD53D vs SN65HVD51D So sánh

So sánh chi tiết song song của SN65HVD53D bằng Texas Instruments và SN65HVD51D bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
SN65HVD53D SN65HVD53D - High-Output Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD53D - High-Output Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD53D ✓ Hoạt động
Texas Instruments
SN65HVD51D SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD51D ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SN65HVD53D SN65HVD51D
Thương hiệu Texas Instruments Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Device Type Full-duplex RS-485 / RS-422 transceiver with enables —
Number of Drivers / Receivers 1 / 1 —
Driver Enable Polarity Active-high —
Receiver Enable Polarity Active-low —
Unit Load Option 1/8 unit-load option available (up to 256 nodes on the bus) —
Maximum Nodes on Bus 256 nodes —
Bus Pin ESD Protection Exceeds 15 kV HBM —
Driver Output Transition Time Options 1 Mbps, 5 Mbps and 25 Mbps signaling rates —
Standby Current 1 uA (both driver and receiver disabled) Less than 1 µA
Receiver Output Glitch-free —
Standards Supported RS-485, RS-422 —
Supply Voltage Range [DATA_NEEDED: supply voltage range] 4.5 V to 5.5 V
Maximum Data Rate (this device) [DATA_NEEDED: maximum data rate for SN65HVD53D] —
Driver Output Current [DATA_NEEDED: high-output driver current] —
Receiver Sensitivity [DATA_NEEDED: receiver input sensitivity] —
Khoảng nhiệt độ hoạt động -40 C to +85 C -40 °C to 85 °C
Hộp SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch 8-pin SOIC (D)
Kiểu lắp đặt Surface mount Surface mount
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
Product Type — RS-422/RS-485 full-duplex transceiver
Driver Count — 1 driver
Receiver Count — 1 receiver
Maximum Signaling Rate — 5 Mbps
Interface Standards — RS-422 and RS-485
Duplex Mode — Full-duplex
Receiver Unit Load — 1/8 unit load
Maximum Bus Nodes — Up to 256 nodes
Bus-Pin ESD Protection — Exceeds 15 kV HBM
Available Driver Transition Rates — 1 Mbps, 5 Mbps, and 25 Mbps
Enable Architecture — Fully enabled; no external enable pins
REACH Status — [DATA_NEEDED: REACH compliance status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá