10AS048E2F29I2LG - Arria 10 SX SoC FPGA, 480K LE, Dual A9 | Intel
部品番号: 10AS048E2F29I2LG ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $2850 | $2,850.00 |
| 10 | $2720 | $27,200.00 |
| 100 | $2580 | $258,000.00 |
| 500 | $2440 | $1,220,000.00 |
| 1,000 | $2295 | $2,295,000.00 |
10AS048E2F29I2LG 概要
A System-on-Chip (SoC) FPGA is a heterogeneous compute device that combines a general-purpose ARM Cortex processor subsystem (HPS) with a programmable FPGA fabric on a single silicon die, communicating through a high-bandwidth coherent bus. In the broader device taxonomy, the 10AS048E2F29I2LG sits within: SoC FPGA -> FPGA -> programmable logic -> semiconductor IC. This integration reduces BOM count, board area, and latency between processor and fabric compared with using a discrete FPGA + external MPU.
Key features of the 10AS048E2F29I2LG include up to 480K logic elements, embedded DSP blocks for fixed- and floating-point signal processing, integrated transceivers up to 12.5 Gbps, a 32-bit DDR3/DDR4 hard memory controller in the HPS, and CoreSight debug for multi-core trace. The 'E2' speed grade balances -2 speed performance against dynamic power, while the 'I' industrial temperature rating suits outdoor, factory-floor, and aerospace embedded deployments.
The 20 nm TSMC process enables a high logic density to power ratio, with hardened peripherals (PCIe Gen2/Gen3, EMAC, USB 2.0 OTG) and partial reconfiguration support, allowing the fabric to be reprogrammed on-the-fly while the HPS continues to execute. Typical applications include wireless baseband processing, radar and SIGINT front ends, industrial machine vision, and avionics LRUs.
When designing with the 10AS048E2F29I2LG, plan the HPS-to-Fabric AXI bridge bandwidth, place decoupling for the 0.9 V core supply within 100 mils of the BGA balls, and use the Quartus Prime SoC Edition toolchain. RoHS and REACH compliance must be verified against the device-specific material declaration.
This page synthesizes distributor inventory, pin-compatible drop-in variants in the Arria 10 family, and practical PCB/thermal design notes not collected in the manufacturer datasheet.
ドロップイン代替品: 10AS048E2F29I2LG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: 10AS048E2F29I2LG （同一形状・フットプリント） — 相違点: Package, RoHS Status, Product Type, Logic Elements, Mounting Type.
クイック比較ツール — 並列比較する代替部品を選択:
10AS048E2F29I1HG
✅ ドロップイン✓ 在庫あり
$2120 / 個
データシートを見る →10AS048E2F29E2LG
✅ ドロップイン✓ 在庫あり
$1995 / 個
データシートを見る →10AS048E2F29E2SG
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →10AS048E2F29E1HG
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →10AS048E1F29I1HG
✅ ドロップイン✓ 在庫あり
$1920 / 個
データシートを見る →10AS048E2F29I2LG 最大定格＆電気的特性
| Product Type | SoC FPGA (System-on-Chip with ARM Cortex-A9 HPS) |
| Family | Arria 10 SX |
| Device Designator | 10AS048 |
| Logic Elements | 480,000 |
| HPS Cores | Dual ARM Cortex-A9 MPCore with CoreSight |
| Process Technology | 20 nm |
| Core Supply Voltage | 0.9 V |
| 動作温度 | -40C to +100C (Industrial) |
| パッケージ | 780-pin FC-FBGA, 29 x 29 mm |
| Speed Grade | -2 |
| RoHS ステータス | Compliant (per manufacturer ordering page) |
| 実装タイプ | Surface Mount (BGA) |
| Maximum Fabric Frequency | 1.5 GHz (core fabric performance per distributor description) |
| Hard Memory Controller | DDR3/DDR4 (HPS) |
10AS048E2F29I2LG 780-pin fc-fbga, 29 x 29 mm ピン配置ガイド
10AS048E2F29I2LG (780-pin fc-fbga, 29 x 29 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: 10AS048E2F29I2LG.
詳細は データシート をご参照ください。
主な用途
10AS048E2F29I2LG の用途: 6 件s: Wireless Baseband Processing, Radar and SIGINT Front-End Processing, Industrial Machine Vision, Avionics and Defense LRUs, Medical Imaging Equipment, High-Performance Embedded Computing.
Wireless Baseband Processing
The 10AS048E2F29I2LG is well suited to wireless baseband processing where a programmable RF data path and a Linux-capable host processor are co-located. Its 480K logic elements and hardened DSP blocks deliver the gate density required for LTE/5G NR PHY channel coding, FFT/iFFT, and digital pre-distortion loops, while the dual-core ARM Cortex-A9 HPS runs the MAC scheduler and OAM stack over DDR3/DDR4. The industrial -40C to +100C temperature range lets the same part serve outdoor small-cell enclosures, and the 0.9 V core rail keeps dynamic power within the budget of a fanless chassis.
おすすめ
Radar and SIGINT Front-End Processing
The 10AS048E2F29I2LG is widely deployed in defense and SIGINT signal pipelines where wideband ADC data must be decimated, pulse-compressed, and Doppler-processed in real time. The Arria 10 SX 480K-LE fabric delivers the FFT and vector-matrix throughput required by phased-array radar, while the HPS runs Linux + RFNoC-style drivers to push detection events upstream. Industrial temperature screening and a 20 nm low-power process keep thermal envelopes manageable for ruggedized enclosures.
おすすめ
Industrial Machine Vision
The 10AS048E2F29I2LG suits high-frame-rate industrial machine vision systems where MIPI or GigE Vision cameras must be aggregated, undistorted, and inspected with CNN-style classifiers in real time. The dual ARM Cortex-A9 HPS handles Ethernet protocols and HMI/PLC integration, while the FPGA fabric accelerates Bayer demosaicing, lens correction, and ROI cropping. The 780-pin FC-FBGA footprint supports the high I/O count needed for multi-camera aggregation.
おすすめ
Avionics and Defense LRUs
The 10AS048E2F29I2LG is used in avionics Line Replaceable Units (LRUs) where DO-254 design assurance and MIL-STD-810 environmental screening are required. The industrial -40C to +100C temperature range supports non-pressurized sections, the Arria 10 SX fabric provides SEU-mitigation through partial reconfiguration and scrubbing, and the HPS runs ARINC 653 / VxWorks or a DAL-B Linux profile. The 780-pin FC-FBGA package integrates cleanly into conduction-cooled chassis.
おすすめ
Medical Imaging Equipment
The 10AS048E2F29I2LG is well matched to ultrasound, endoscopy, and MRI gradient-control systems where deterministic real-time DSP and a managed Linux application plane coexist. The FPGA fabric delivers beamforming and front-end filtering for ultrasound channels, while the dual-core ARM HPS handles the user interface, DICOM, and PACS integration. The industrial temperature screening supports portable cart-side equipment.
おすすめ
High-Performance Embedded Computing
The 10AS048E2F29I2LG serves as the core of HPEC nodes where one FPGA must accelerate a single workload (compression, crypto, AI inference) while the HPS orchestrates data ingest and dispatch. The 480K-LE fabric holds multi-lane PCIe Gen2/Gen3 hard IP, and the dual-core ARM Cortex-A9 cluster runs Linux user-plane stacks. Industrial temperature and the F29 FC-FBGA footprint make it drop-in compatible with many existing Arria 10 SX carrier designs.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: 10AS048E2F29I2LG — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | 10AS048E2F29I1HG | 10AS048E2F29E2LG | 10AS048E2F29E2SG | 10AS048E2F29E1HG | 10AS048E1F29I1HG |
|---|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) |
| Package | 780-pin FC-FBGA (F29, 29x29 mm) | 780-pin FC-FBGA (F29, 29x29 mm) - same | 780-pin FC-FBGA (F29, 29x29 mm) - same | 780-pin FC-FBGA (F29, 29x29 mm) - same | 780-pin FC-FBGA (F29, 29x29 mm) - same | 780-pin FC-FBGA (F29, 29x29 mm) - same |
| Logic Elements | 480,000 | 480,000 | 480,000 | 480,000 | 480,000 | 480,000 |
| Speed Grade | -2 | -1 | -2 | -2 | -1 | -1 |
| Temperature Grade | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Extended (0C to +100C) | Extended (0C to +100C) | Extended (0C to +100C) | Industrial (-40C to +100C) |
| Process Node | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm |
| HPS Cores | Dual ARM Cortex-A9 | Dual ARM Cortex-A9 | Dual ARM Cortex-A9 | Dual ARM Cortex-A9 | Dual ARM Cortex-A9 | Dual ARM Cortex-A9 |
| Core Voltage | 0.9 V | 0.9 V | 0.9 V | 0.9 V | 0.9 V | 0.9 V |
| Parametric Match to This Part | 100% (baseline) | 90% | 90% | 90% | 80% | 80% |
主な差別化要因
- Highest speed grade available in the 10AS048 F29 family （vs 10AS048E2F29I1HG (E1))
- Industrial -40C to +100C temperature screening （vs 10AS048E2F29E2LG (E temperature))
- Full HPS + 480K-LE SoC FPGA integration （vs 10AS048E2F29I1HG)
設計ノート
The Arria 10 SX core rail is 0.9 V nominal and can transient-load into the 20-40 A range when the FPGA fabric toggles high-utilization DSP blocks. Use a multi-phase buck regulator (e.g. TPS53681 or LTC3877) with at least 4 phases and place 4-6 x 22 uF polymer bulk capacitors plus 0.1 uF / 1 nF high-frequency ceramics within 100 mils of the BGA core power balls. Ensure the regulator's per-phase inductor saturates above the worst-case peak current; the 0.9 V rail droop during GHRD burst writes must stay inside +/- 3% for HPS reset to remain asserted.
The 780-pin FC-FBGA exposes the die through internal thermal vias. For industrial-temperature deployments, attach a heat spreader or low-profile heat sink with thermal interface material of <= 0.2 C/W. At -2 speed grade and >85% LUT utilization, design-time junction-to-ambient thermal resistance should target <= 1.5 C/W to keep Tj under 100C at 100C ambient. Derate by 10% margin for altitude derating above 15,000 ft in avionics enclosures.
Use a 1.0 mm pitch BGA PCB land pattern with via-in-pad filled and capped per IPC-7093. Match all differential pairs (transceiver lanes, HPS DDR3/DDR4) to a 100 ohm +/-10% differential impedance with intra-pair skew < 1.5 ps. Length-match the HPS DDR4 byte lanes to within 5 mils and the transceiver TX/RX pairs to within 0.05 mm to avoid bit-error-rate degradation above 10 Gbps.
Do not populate HPS boot mode strapping resistors inconsistently - the HPS boots from QSPI, NAND, SD, or eMMC based on boot pin sampling at cold-boot. If the QSPI flash is left disconnected, the HPS may stall and appear 'dead' even though the FPGA fabric loads correctly. Also confirm the FPGA configuration source matches the Quartus Programming File Generator output (.sof + .jic for ASx4 configuration). Mixed pull-ups/pull-downs on CFG pins cause intermittent configuration failure.
コンプライアンス情報
RoHS compliance and lead-free finish confirmed per the Intel/Altera ordering page for 10AS048E2F29I2LG. REACH, halogen-free, and conflict-minerals status require the device-specific Material Declaration (MDDS) from Intel; not present in the verified web data.
