A3PE600-FG484 - ProASIC3E 600K-Gate Flash FPGA | Microchip
部品番号: A3PE600-FG484 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $89 | $89.00 |
| 10 | $82.5 | $825.00 |
| 100 | $74 | $7,400.00 |
| 500 | $66.5 | $33,250.00 |
| 1,000 | $59 | $59,000.00 |
A3PE600-FG484 概要
A flash FPGA is a field-programmable gate array whose configuration is stored in on-chip flash cells rather than SRAM. Unlike SRAM FPGAs, flash FPGAs power up instantly with no external configuration PROM, simplify system bring-up, and provide inherent protection against cloning and bitstream tampering. Within the power-management hierarchy of programmable logic, the ProASIC3E family sits alongside Microchip's Igloo (low-power) and Fusion (mixed-signal) families, all built on the same flash switch fabric.
Key features include 13824 versatile logic cells (CLBs), 600K system gates, support for soft ARM processors, abundant embedded block RAM, up to 270 single-ended user I/Os with support for common I/O standards, and footprint compatibility between FG256 and FG484 packages, allowing migration across the ProASIC3E family on the same PCB.
The A3PE600 architecture uses a Sea-of-Gates flash fabric with routing switches programmed by flash cells, delivering deterministic timing and 231 MHz system performance in a 1.5V core with 3.3V auxiliary supply. Nonvolatile configuration eliminates the boot delay and the external flash of SRAM-based alternatives, and Flash*Freeze-style low-power modes (in the L variants) complement the family for power-sensitive systems.
Typical applications include industrial automation control, networking and communications line cards, avionics and defense electronics requiring single-chip secure configuration, test and measurement instrumentation, and cost-effective ASIC replacement in consumer and computing platforms.
A key design consideration: ensure power sequencing-free simplicity is exploited, but verify I/O banking and VREF placement when using voltage-referenced I/O standards, assigning one VREF pin per minibank.
This page synthesizes distributor pricing context, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: A3PE600-FG484 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: A3PE600-FG484 （同一形状・フットプリント） — 相違点: Package, Configuration Memory, Operating Temperature, Family, System Gates.
クイック比較ツール — 並列比較する代替部品を選択:
A3PE600-FGG484
✅ ドロップイン✓ 在庫あり
$53.7 / 個
データシートを見る →A3PE600-FG484I
✅ ドロップイン✓ 在庫あり
$86.1 / 個
データシートを見る →A3PE600-FGG484I
✅ ドロップイン✓ 在庫あり
$44.03 / 個
データシートを見る →A3PE600L-FG484M
✅ ドロップイン✓ 在庫あり
$44.9 / 個
データシートを見る →A3PE600L-FGG484M
✅ ドロップイン✓ 在庫あり
$79.9 / 個
データシートを見る →A3PE600-FG484 最大定格＆電気的特性
| Family | ProASIC3E (Flash FPGA) |
| System Gates | 600000 |
| Logic Cells (CLBs) | 13824 |
| User I/Os | 270 |
| Embedded Memory | 110592 |
| Maximum System Frequency | 231 MHz |
| Core Voltage | 1.5 V |
| Technology | 130 nm CMOS flash |
| パッケージ | 484-ball FBGA (23 x 23 mm, 1.0 mm pitch) |
| Package Height | 2.23 mm |
| 実装タイプ | Surface Mount |
| Configuration | Nonvolatile flash (single-chip, no external configuration PROM) |
| Package Footprint Compatibility | FG256 and FG484 footprint-compatible |
| Soft Processor Support | Soft ARM support |
| Packaging | Tray |
A3PE600-FG484 fg256 and fg484 footprint-compatible ピン配置ガイド
A3PE600-FG484 (fg256 and fg484 footprint-compatible パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: A3PE600-FG484.
詳細は データシート をご参照ください。
主な用途
A3PE600-FG484 の用途: 6 件s: Industrial Automation Control, Networking and Communications, Avionics and Defense Electronics, Test and Measurement Instrumentation, ASIC Replacement and Prototyping, Secure Embedded Systems and IoT Gateways.
Industrial Automation Control
In factory automation controllers, motor drive sequencing, and I/O concentrators, the A3PE600-FG484 integrates glue logic, state machines, and bus bridging into one 600K-gate flash FPGA. Its nonvolatile configuration means the controller powers up functional within milliseconds - no configuration PROM or microprocessor boot handshake - improving line-start reliability. The 270 user I/Os accommodate dense industrial I/O banks at 3.3V and other common standards, while 231 MHz system performance handles multi-axis coordination. Flash storage of the bitstream also resists tampering of proprietary control IP on the plant floor.
おすすめ
Networking and Communications
Line cards, switch fabric bridges, and protocol converters benefit from the A3PE600-FG484's combination of 13824 logic cells and 110592 bits of embedded block RAM for FIFOs, packet buffers, and CAM-style lookup structures. At 231 MHz, the fabric supports common 8-bit/16-bit parallel interfaces and bridging logic between MACs, PHYs, and backplanes. Because the ProASIC3E configures from on-chip flash, network equipment recovers instantly after power events without reconfiguration servers, an advantage for unattended telecom cabinets and remote access nodes deployed across dispersed sites.
おすすめ
Avionics and Defense Electronics
Avionics subsystems value the ProASIC3E's single-chip nonvolatile configuration and proven security features: the bitstream never leaves the device, reducing supply-chain tampering risk. The A3PE600-FG484's 600K gates implement MIL-STD-style bus interfaces, ARINC-style data formatting, and sensor aggregation in one device. Industrial-grade A3PE600-FGG484I equivalents extend temperature range for cockpit-adjacent or external pods. Flash FPGA determinism (no configuration error window during power-up) simplifies DO-relevant safety analyses for load management, display drivers, and mission-data recorders.
おすすめ
Test and Measurement Instrumentation
Bench and automated test equipment use the A3PE600-FG484 for timing generators, bus emulators, and trigger fan-out logic. The 231 MHz fabric timing supports sub-10ns event resolution, and 270 user I/Os allow one FPGA to interface with multiple instrument front-ends simultaneously. Instant-on flash configuration means instruments are ready the moment power is applied - valuable for production test stations cycling power between DUTs. FG256/FG484 footprint compatibility lets instrument OEMs scale designs across the ProASIC3E family without PCB respins as channel counts grow.
おすすめ
ASIC Replacement and Prototyping
The ProASIC3E family is explicitly positioned by Microchip as a cost-effective ASIC replacement for consumer, computing, and communications markets. Designers prototype ASIC control logic on the A3PE600-FG484's 13824-cell fabric, then either ship the FPGA directly in low/medium volumes or use the validated design as an ASIC handoff artifact. Nonvolatile flash eliminates the FPGA configuration flash that would otherwise duplicate ROM/OTP in ASIC-like products, cutting BOM cost. 130nm flash technology delivers stable, deterministic timing without the configuration-time variability of SRAM alternatives.
おすすめ
Secure Embedded Systems and IoT Gateways
Embedded gateways and secure edge devices use the A3PE600-FG484 as a cryptographic bridge, secure boot manager, or sensor-fusion controller. ProASIC3E flash fabric provides protection against design theft: configuration resides on-chip, so competitors cannot intercept bitstreams during board programming. The device implements soft ARM processor support, allowing a small control CPU plus custom accelerators in one chip. Designers preferring lower static power in battery-assisted nodes can drop in the A3PE600L-FGG484M, which adds Flash*Freeze instantaneous static mode on the identical PCB footprint.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: A3PE600-FG484 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | A3PE600-FGG484 | A3PE600-FGG484I | A3PE600-FG484I | A3PE600L-FG484M |
|---|---|---|---|---|---|
| Package | FBGA-484 (23 x 23 mm) | FBGA-484 - same | FBGA-484 - same | FBGA-484 - same | FBGA-484 - same |
| Brand | Microchip Technology (Microsemi) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 600K | 600K | 600K | 600K | 600K |
| User I/Os | 270 | 270 | 270 | 270 | 270 |
| Max System Frequency | 231 MHz | 231 MHz | 231 MHz | 231 MHz | 231 MHz |
| Core Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.2 V - 1.5 V |
| Temperature Grade | Commercial | Commercial (RoHS pkg) | Industrial | Industrial | Industrial (M grade) |
| Low-Power Flash*Freeze Mode | No | No | No | No | Yes |
主な差別化要因
- Nonvolatile flash configuration - true single-chip solution （vs SRAM FPGAs (Xilinx/Intel equivalents))
- Low-power Flash*Freeze option within the same footprint （vs A3PE600L-FG484M)
- RoHS-compliant package option available （vs A3PE600-FGG484)
設計ノート
Supply the A3PE600-FG484 with a 1.5V core rail and 3.3V auxiliary/I/O rail per the ProASIC3E power architecture in the manufacturer datasheet. Because configuration is nonvolatile, there is no configuration-current surge at power-up, simplifying regulator sizing versus SRAM FPGAs. Nonetheless, decouple each supply ball pair with 0.1uF ceramics placed within 2 mm of the balls, plus bulk 10uF-22uF per rail. Verify core current against your post-place-and-route power estimate in Libero rather than worst-case table values.
The FG484 uses a 1.0 mm ball pitch and 23 x 23 mm body, requiring a standard 484-ball BGA land pattern with via-in-pad or dogbone fanout on at least 0.8 mm channel width; plan for 4+ PCB layers to break out 270 user I/Os. Per the datasheet, FG256 and FG484 packages are footprint-compatible, so designing the FG484 footprint allows future migration to FG256-family members. When using voltage-referenced I/O standards, assign one VREF pin per minibank as required.
A frequent error is ordering the plain FG484 for RoHS-mandated production: in ProASIC3E ordering codes the 'G' denotes RoHS-compliant packaging, so lead-free builds require A3PE600-FGG484 (or FGG484I). Another pitfall is treating higher-density ProASIC3E parts (A3PE1500/A3PE3000) as drop-ins; densities differ far beyond 30% and timing closure must be redone. Finally, recompile the design in Libero SoC and re-verify I/O assignment and timing whenever swapping speed/temperature grade variants.
コンプライアンス情報
Per manufacturer datasheet notes, the 'G' in ProASIC3E ordering codes indicates RoHS-compliant packages; the base A3PE600-FG484 lacks 'G', so specify A3PE600-FGG484/FGG484I for RoHS builds. Other compliance statuses not found in provided data.
