EP1S60F1020I6 - Stratix 57K LEs FPGA 1020-BGA | Intel / Altera
部品番号: EP1S60F1020I6 ⚠ ラストタイムバイ| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $5413.87 | $5,413.87 |
| 10 | $5008.55 | $50,085.50 |
| 100 | $4310.5 | $431,050.00 |
| 500 | $3845.2 | $1,922,600.00 |
EP1S60F1020I6 概要
An FPGA (Field Programmable Gate Array) is a semiconductor device containing configurable logic blocks (CLBs), programmable interconnects, and dedicated hardware resources such as block RAM, DSP blocks, and high-speed transceivers. FPGAs sit within the programmable logic category of digital ICs, parallel to ASICs but with the advantage of in-system reprogrammability. Stratix devices specifically target high-performance signal processing, communications infrastructure, and ASIC prototyping workloads.
Key features of the EP1S60F1020I6 include 6,570 logic arrays blocks (LABs) organized in a Stratix fabric, embedded multiplier/DSP blocks for high-speed arithmetic, dedicated external memory interfaces supporting DDR/DDR2 SDRAM, and on-chip phase-locked loops (PLLs) for clock management. The -I6 speed grade designates the industrial temperature range of -40C to +100C case with optimized timing closure.
Architecturally, the Stratix family introduced the TriMatrix embedded memory structure (three block RAM sizes per device), embedded DSP blocks with dedicated multiply-accumulate hardware, and high-speed I/O standards including LVDS and HyperTransport. The 1020-ball FC-FBGA package provides ample I/O count for parallel interfaces and high-speed serial links.
Typical applications include high-performance ASIC prototyping, telecom baseband processing, video and image processing pipelines, military and aerospace signal processing, and test & measurement instrumentation. The large logic capacity and rich DSP resources also suit radar, software-defined radio, and high-speed data acquisition designs.
When designing with this device, plan for the 1.5V core supply and multiple I/O voltage rails (1.5V, 1.8V, 2.5V, 3.3V). The 1020-ball BGA requires multi-layer PCB with microvia or via-in-pad technology; signal integrity analysis is mandatory for DDR memory interfaces. Quartus II is the supported development toolchain.
This page synthesizes distributor pricing, drop-in Stratix alternatives, and practical BGA PCB layout notes not consolidated in the manufacturer datasheet alone.
ドロップイン代替品: EP1S60F1020I6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EP1S60F1020I6 （同一形状・フットプリント） — 相違点: Speed Grade, Package, Family, Operating Temperature, Logic Array Blocks (LABs).
クイック比較ツール — 並列比較する代替部品を選択:
EP1S60F1020I6N
✅ ドロップイン✓ 在庫あり
$3650 / 個
データシートを見る →EP1S60F1020C7N
✅ ドロップイン✓ 在庫あり
$1580 / 個
データシートを見る →EP1S60F1020C7
✅ ドロップイン✓ 在庫あり
$1750 / 個
データシートを見る →EP1S60F1020C6N
✅ ドロップイン✓ 在庫あり
$195 / 個
データシートを見る →EP1S60F1020C6
✅ ドロップイン✓ 在庫あり
$105 / 個
データシートを見る →EP1S60F1020C6NAA
✅ ドロップイン✓ 在庫あり
$145 / 個
データシートを見る →EP1S60F1020C5N
✅ ドロップイン✓ 在庫あり
$2050 / 個
データシートを見る →EP1S60F1020C5
✅ ドロップイン✓ 在庫あり
$171 / 個
データシートを見る →EP1S60F1020I6 最大定格＆電気的特性
| Family | Stratix |
| Logic Elements | 57,120 |
| Logic Array Blocks (LABs) | 6,570 |
| Embedded Memory Bits | 5,215,104 bits |
| Maximum User I/O | 773 |
| Process Technology | 130 nm CMOS |
| Core Supply Voltage | 1.5 V |
| Maximum Internal Frequency | 450 MHz |
| パッケージ | 1020-ball FC-FBGA (33 x 33 mm, 1 mm pitch) |
| Operating Temperature (I-grade) | -40C to +100C (case) |
| Speed Grade | -6 |
| 実装タイプ | Surface Mount (BGA) |
| RoHS ステータス | Compliant |
| Lead-Free | Yes |
| MSLレベル | 3 |
EP1S60F1020I6 1020-ball fc-fbga (33 x 33 mm, 1 mm pitch) ピン配置ガイド
EP1S60F1020I6 (1020-ball fc-fbga (33 x 33 mm, 1 mm pitch) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EP1S60F1020I6.
詳細は データシート をご参照ください。
主な用途
EP1S60F1020I6 の用途: 7 件s: High-Performance ASIC Prototyping, Telecom Baseband Processing, Video and Image Processing Pipelines, Military and Aerospace Signal Processing, Test and Measurement Instrumentation, Software-Defined Radio (SDR) Platforms, Industrial Automation Controllers.
High-Performance ASIC Prototyping
The EP1S60F1020I6's 57,120 logic elements and 5,215,104 bits of TriMatrix memory make it well suited for prototyping mid-complexity ASIC designs before tape-out. Its 773 user I/Os and high pin count accommodate full ASIC I/O replication for functional verification at system speed. Engineers mapping an ASIC RTL into the Stratix fabric benefit from dedicated block RAM and DSP blocks that mirror common ASIC macro functions, enabling real-world timing and throughput analysis. Quartus II synthesis supports industry-standard HDL flows, and the -I6 speed grade provides timing margin for iterative debug.
おすすめ
Telecom Baseband Processing
The EP1S60F1020I6's high logic density, embedded DSP blocks, and external memory interface support make it a strong candidate for telecom baseband signal processing. Its 130 nm process and Stratix architecture deliver up to 450 MHz internal performance, sufficient for symbol-rate processing in WCDMA, WiMAX, and early LTE base station designs. The 1020-BGA package exposes enough I/O for parallel ADC/DAC interfaces and backplane connectivity. Industrial temperature grade (-I6) suits outdoor base station enclosures where ambient temperatures fluctuate widely.
おすすめ
Video and Image Processing Pipelines
The EP1S60F1020I6's combination of 6,570 LABs, 5 Mbit embedded memory, and dedicated multiplier blocks makes it suitable for real-time video processing pipelines including scaling, deinterlacing, and color space conversion. The abundant block RAM supports line buffers and frame stores needed for HD video, while DSP blocks accelerate motion estimation and filtering operations. The 773 user I/Os accommodate parallel DVI/HDMI input buses and DDR2 SDRAM frame buffers. Industrial temperature grade enables deployment in surveillance and broadcast equipment.
おすすめ
Military and Aerospace Signal Processing
The EP1S60F1020I6's industrial -40C to +100C temperature range and high logic density suit military and aerospace signal processing applications including radar front-end preprocessing, electronic warfare subsystems, and secure communications. The 1020-BGA package provides the I/O count required for multi-channel ADC arrays and high-speed serial links. Although not fully MIL-PRF-38535 qualified, the industrial temperature screening and Altera's legacy reliability data make it acceptable for non-critical defense subsystems. Conformal coating and vibration-resistant PCB mounting are recommended.
おすすめ
Test and Measurement Instrumentation
The EP1S60F1020I6's high I/O count and embedded memory make it well suited for test and measurement instruments such as logic analyzers, protocol testers, and arbitrary waveform generators. The 773 user I/Os support parallel stimulus/response channels while the 5,215,104 bits of block RAM provide deep capture buffers. Dedicated PLLs generate multiple clock domains required for mixed-signal test patterns. Industrial temperature grade enables bench and field-deployment instrumentation. Quartus II supports integration with standard T&M firmware frameworks.
おすすめ
Software-Defined Radio (SDR) Platforms
The EP1S60F1020I6's high logic capacity, embedded multipliers, and ample memory bandwidth make it a viable platform for software-defined radio implementations including Wi-Fi, GPS, and military waveform processing. Its DSP blocks accelerate FFT and channelization operations, while block RAM buffers I/Q sample streams. The 1020-BGA footprint provides enough I/O for multi-antenna diversity and high-speed ADC interfaces. Engineers targeting legacy SDR designs benefit from Altera's reference designs for digital down-conversion and pulse shaping.
おすすめ
Industrial Automation Controllers
The EP1S60F1020I6's industrial temperature grade and high logic density suit demanding factory automation controllers, motion control systems, and high-speed industrial networking gateways. Its 773 user I/Os accommodate parallel encoder interfaces, multi-axis servo control loops, and high-speed EtherCAT or PROFINET bridging. Embedded block RAM supports fast lookup tables for PID loops, while DSP blocks handle real-time control algorithms. The 1.5V core and multiple I/O voltage rails simplify integration into mixed-voltage industrial designs.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EP1S60F1020I6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EP1S60F1020I6N | EP1S60F1020C7N | EP1S60F1020C6N | EP1S60F1020C5N |
|---|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Package | 1020-ball FC-FBGA | 1020-ball FC-FBGA - same | 1020-ball FC-FBGA - same | 1020-ball FC-FBGA - same | 1020-ball FC-FBGA - same |
| Logic Elements | 57,120 | 57,120 | 57,120 | 57,120 | 57,120 |
| Speed Grade | -6 | -6 (same) | -7 (slower) | -6 (same) | -5 (faster) |
| Operating Temperature | -40C to +100C (industrial) | -40C to +100C (industrial) | 0C to +85C (commercial) | 0C to +85C (commercial) | 0C to +85C (commercial) |
| RoHS Compliance | Compliant (varies by suffix) | Compliant (N suffix) | Compliant (N suffix) | Compliant (N suffix) | Compliant (N suffix) |
| Embedded Memory Bits | 5,215,104 | 5,215,104 | 5,215,104 | 5,215,104 | 5,215,104 |
| Maximum User I/O | 773 | 773 | 773 | 773 | 773 |
| Lifecycle Status | Last-time-buy | Last-time-buy | Last-time-buy | Last-time-buy | Last-time-buy |
| Toolchain | Quartus II | Quartus II | Quartus II | Quartus II | Quartus II |
主な差別化要因
- Industrial temperature grade with -6 speed grade balance （vs EP1S60F1020C7N)
- RoHS and non-RoHS variants in same footprint （vs EP1S60F1020I6N)
- Higher logic density than EP1S40 family （vs EP1S40F1020I6)
設計ノート
The 1020-ball FC-FBGA package with 1 mm ball pitch requires a multilayer PCB (typically 8-12 layers) with microvia or via-in-pad technology. Standard through-hole vias cannot be reliably placed between the 1 mm pitch balls without violating manufacturing rules. Recommended stack-up: high-density interconnect (HDI) with 1-2-1 or 2-4-2 microvia construction. Maintain a continuous ground plane beneath the BGA to control return paths and provide thermal dissipation. All 1020 balls must be soldered; missing solder joints cause open or intermittent failures that are difficult to diagnose.
The Stratix EP1S60 requires a 1.5V core supply plus multiple I/O voltage rails (1.5V, 1.8V, 2.5V, 3.3V) for its 773 user I/Os. Use a low-impedance power distribution network with decoupling capacitors placed as close to the BGA balls as possible - typically 100 nF ceramic per power pin group and bulk decoupling with 10-47 uF tantalum or polymer capacitors near each voltage rail. The 1.5V core current can exceed several amps during high toggle rates; verify the voltage regulator can handle worst-case inrush during configuration.
At maximum toggle rates with 773 I/Os switching, the Stratix EP1S60 can dissipate 5-8 W within the 33 x 33 mm FC-FBGA package. The industrial temperature grade requires the case temperature to remain below +100C, so thermal management is essential. Use thermal vias in the BGA land pattern to transfer heat to internal copper planes, and consider an external heatsink for high-utilization designs. Estimate: junction-to-ambient thermal resistance is approximately 15-20 C/W with a properly designed thermal via array, giving junction temperature rise of 75-100C above ambient at 5 W dissipation.
DDR/DDR2 external memory interfaces require matched-length routing and impedance-controlled traces. The Quartus II pin planner and board-level signal integrity tools should be used during PCB layout to validate DDR timing margins. Place external memory within 25-50 mm of the FPGA to minimize stub lengths and reflections. Differential pairs (LVDS, HyperTransport) must maintain 100 ohm differential impedance with length matching within 10 mil. Clock inputs should be guarded with a ground fence to reduce crosstalk.
Do not assume the EP1S60F1020I6 is in production - it is in its last-time-buy phase. Engineers designing new products should evaluate Stratix II/III/IV, Cyclone IV/V, or modern Arria/Cyclone 10 families for new designs. Configuration via passive serial, fast passive parallel, or JTAG requires proper MSEL pin strapping - incorrect strapping prevents the device from configuring. Also note that the EP1S60F1020I6 suffix 'I6' denotes industrial temp AND -6 speed grade; do not confuse this with commercial-grade parts with different temperature ranges.
コンプライアンス情報
RoHS compliance confirmed by Altera/Intel product page; lead-free termination standard for N-suffix variants. Not AEC-Q100 qualified (industrial-grade only). Halogen-free status not explicitly stated in available data.