M29W064FB70N3F - 64Mb NOR Flash 70ns AEC-Q100 | Micron Technology
部品番号: M29W064FB70N3F ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $1.62 | $1.62 |
| 10 | $1.48 | $14.80 |
| 100 | $1.36 | $136.00 |
| 500 | $1.28 | $640.00 |
| 1,000 | $1.2032 | $1,203.20 |
M29W064FB70N3F 概要
Parallel NOR flash is a non-volatile memory technology that connects directly to a processor's address and data buses, allowing random access to any byte or word for in-place code execution (XIP). In the memory hierarchy, NOR flash sits alongside SRAM and SDRAM as a code-storage medium: it does not offer the density of NAND flash, but its fast random read access and high reliability make it the default boot and firmware memory for embedded systems.
Key features of the M29W064FB70N3F include the x8/x16 bus-width selectable architecture via the BYTE# pin, a 70 ns access time suitable for zero-wait-state operation at moderate bus frequencies, and block-protected boot-block sector organization (FB = boot block bottom). The device supports single 3V/3.3V supply operation, fast program and erase operations with status polling, and an operating temperature range of -40C to +125C for automotive and industrial environments.
Technically, the device uses a page-mode architecture with the array organized as 64 Mbit of floating-gate cells; erase granularity is asymmetric boot blocks plus main blocks, and programming uses the standard command-set interface familiar to users of the M29W family. The RY/BY# output provides hardware status indication without bus polling.
Typical applications include automotive ECU boot firmware, telematics and infotainment modules, industrial PLCs, networking equipment code storage, and set-top box firmware.
Design consideration: because the part is flagged obsolete in recent distributor parametric data, plan last-time-buy quantities or validate a drop-in M29W064F variant early in the design cycle.
This page synthesizes verified distributor pricing, drop-in alternatives, pinout, and practical design notes not found in a single manufacturer datasheet.
ドロップイン代替品: M29W064FB70N3F — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: M29W064FB70N3F （同一形状・フットプリント） — 相違点: Interface, Memory Type, Package, Organization, RoHS Status.
クイック比較ツール — 並列比較する代替部品を選択:
M29W064FB70N3E
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →M29W064FT70N3E
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →M29W320DB70N3F
✅ ドロップイン✓ 在庫あり
$1.3 / 個
データシートを見る →M29W064FT70N3F
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$6.3 / 個
データシートを見る →M29W064FB70N3F 最大定格＆電気的特性
| メモリタイプ | NOR Flash, Parallel |
| Density | 64 Mbit |
| メモリ構成 | 8M x8 / 4M x16 |
| 電源電圧 | 2.7 V to 3.6 V |
| Access Time | 70 ns |
| インターフェース | Parallel, x8/x16 selectable (BYTE#) |
| Boot Block Configuration | Bottom boot block (FB) |
| 動作温度 | -40C to +125C |
| Automotive Qualification | AEC-Q100 qualified |
| パッケージ | 48-TSOP |
| 実装タイプ | Surface Mount |
| Packaging | Tape & Reel (TR suffix) |
| Status Polling | RY/BY# hardware pin + data polling |
| Erase/Program Interface | Command set (M29W family compatible) |
| RoHS ステータス | Compliant (F suffix) |
| Part Status | Obsolete |
M29W064FB70N3F ピン構成
| ピン 1 | A15 — Address input |
| ピン 2 | A14 — Address input |
| ピン 3 | A13 — Address input |
| ピン 4 | A12 — Address input |
| ピン 5 | A11 — Address input |
| ピン 6 | A10 — Address input |
| ピン 7 | A9 — Address input |
| ピン 8 | A8 — Address input |
| ピン 9 | A19 — Address input |
| ピン 10 | A20 — Address input |
| ピン 11 | WE# — Write enable (active low) |
| ピン 12 | RP# — Reset/Power-down (active low) |
| ピン 13 | A21 — Address input |
| ピン 14 | WP# — Write protect (active low) |
| ピン 15 | RY/BY# — Ready/Busy status output |
| ピン 16 | A18 — Address input |
| ピン 17 | A17 — Address input |
| ピン 18 | A7 — Address input |
| ピン 19 | A6 — Address input |
| ピン 20 | A5 — Address input |
| ピン 21 | A4 — Address input |
| ピン 22 | A3 — Address input |
| ピン 23 | A2 — Address input |
| ピン 24 | A1 — Address input |
| ピン 25 | A0 — Address input |
| ピン 26 | E# — Chip enable (active low) |
| ピン 27 | VSS — Ground |
| ピン 28 | Q0 — Data output/input 0 |
| ピン 29 | Q8 — Data output/input 8 |
| ピン 30 | Q1 — Data output/input 1 |
| ピン 31 | Q9 — Data output/input 9 |
| ピン 32 | Q2 — Data output/input 2 |
| ピン 33 | Q10 — Data output/input 10 |
| ピン 34 | Q3 — Data output/input 3 |
| ピン 35 | Q11 — Data output/input 11 |
| ピン 36 | VCCQ — Output buffer supply |
| ピン 37 | Q4 — Data output/input 4 |
| ピン 38 | Q12 — Data output/input 12 |
| ピン 39 | Q5 — Data output/input 5 |
| ピン 40 | Q13 — Data output/input 13 |
| ピン 41 | Q6 — Data output/input 6 |
| ピン 42 | Q14 — Data output/input 14 |
| ピン 43 | Q7 — Data output/input 7 |
| ピン 44 | Q15/A-1 — Data 15 / address A-1 in byte mode |
| ピン 45 | VSSQ — Output buffer ground |
| ピン 46 | BYTE# — Byte/word organization select |
| ピン 47 | OE# — Output enable (active low) |
| ピン 48 | VCC — Core supply, 2.7 V to 3.6 V |
主な用途
M29W064FB70N3F の用途: 6 件s: Automotive ECU Boot Firmware, Telematics and Infotainment Modules, Industrial PLC and Automation Controllers, Networking Equipment Code Storage, Set-Top Box and Consumer Firmware, FPGA Configuration Storage.
Automotive ECU Boot Firmware
The M29W064FB70N3F is purpose-built for automotive ECU boot code storage: its AEC-Q100 qualification and -40C to +125C operating range cover body-electronics and powertrain-adjacent modules, while the 70 ns access time allows the MCU to execute boot code directly from the parallel bus without RAM shadowing delays. The FB (bottom boot block) organization places small, individually protected sectors at the bottom of the array, exactly where the reset vector and bootloader reside, protecting them against accidental erase during field firmware updates. The 64 Mbit capacity accommodates bootloader, calibration data, and application images in a single device. RY/BY# hardware status output lets the firmware poll program/erase completion without occupying the bus, keeping interrupt latency predictable in safety-relevant code paths.
おすすめ
Telematics and Infotainment Modules
Telematics control units and entry-level infotainment platforms need reliable, non-volatile code storage that survives temperature cycling and power interruptions, and the M29W064FB70N3F fits that role with its 64 Mbit array, block protection, and automotive temperature rating. The x8/x16 selectable bus (via BYTE#) lets designers use a cost-optimized 8-bit bus during early development and widen to 16 bits in production, halving code-fetch time for larger map and media application images. The 70 ns access time supports zero-wait-state execution at typical 32-bit automotive MCU bus frequencies up to roughly 40-50 MHz with pipeline limitations considered. Its command-set interface is shared across the M29W family, allowing firmware reuse when moving between 32 Mb and 64 Mb densities.
おすすめ
Industrial PLC and Automation Controllers
Industrial programmable logic controllers store firmware, ladder-logic runtime, and configuration in non-volatile parallel NOR flash, and the M29W064FB70N3F's 64 Mbit capacity and 70 ns random access make it well suited to this duty. Its -40C to +125C range covers unconditioned cabinets and outdoor panels, while the parallel interface integrates directly with classic industrial MCU and FPGA code buses. The WP# hardware write-protect pin allows the retained configuration sector to be locked during normal runtime, guarding against power-glitch-induced corruption on factory floors where supply dips are common. Per-page program operation with status polling keeps update windows short during remote firmware maintenance over fieldbus links.
おすすめ
Networking Equipment Code Storage
Switches, routers, and line cards historically used parallel NOR flash for bootloader and OS image storage, and the M29W064FB70N3F's 8 MB capacity matches the typical dual-image scheme where one bank holds the running image and the other a golden fallback. The 70 ns access time permits in-place boot code execution from reset, letting the CPU bring up Ethernet management before any DRAM initialization completes. Asymmetric boot blocks protect the low-address boot loader sector map while large main blocks erase quickly for image updates. BYTE# bus-width selection supports both 8-bit and 16-bit legacy designs on the same PCB footprint, simplifying hardware variant management across product families with different CPU bus widths.
おすすめ
Set-Top Box and Consumer Firmware
Set-top boxes and consumer AV devices rely on parallel NOR flash for secure bootloader and firmware partitions, and the M29W064FB70N3F supplies 64 Mbit at a low single-unit cost (from about $1.20 at volume as of 2026-09-02). Its command-set compatibility with the broad M29W family means boot ROM code written for 32 Mb or 128 Mb siblings ports with minimal changes. The bottom boot blocks hold the immutable bootloader with individual sector protection, while the remaining main blocks store the application image and channel databases that field updates rewrite frequently. The RY/BY# pin lets a low-cost 8-bit controller manage updates without adding bus polling overhead during OTA firmware upgrades.
おすすめ
FPGA Configuration Storage
Parallel NOR flash is a classic configuration memory for FPGAs and CPLDs that load their bitstream at power-up, and the M29W064FB70N3F's 64 Mbit array stores multiple configuration images for design fallback schemes. The 70 ns access time supports fast configuration clocking so a mid-range FPGA completes loading in well under 100 ms, meeting system bring-up timing requirements in industrial and communications equipment. Bottom boot blocks can also hold board-level firmware alongside the bitstream in one device, reducing BOM count. Designers should generate the configuration clock from the FPGA or a dedicated oscillator and honor the flash's specified setup/hold timings, which the 70 ns grade accommodates at conservative clock rates.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: M29W064FB70N3F — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | M29W064FB70N3E | M29W064FT70N3E | M29W064FT70N3F | M29W320DB70N3F |
|---|---|---|---|---|---|
| Package | 48-TSOP | 48-TSOP - same | 48-TSOP - same | 48-TSOP - same | 48-TSOP - same |
| Brand | Micron Technology | Micron Technology | Micron Technology | Micron Technology | Micron Technology |
| Density | 64 Mbit | 64 Mbit | 64 Mbit | 64 Mbit | 32 Mbit |
| Organization | 8M x8 / 4M x16 | 8M x8 / 4M x16 | 8M x8 / 4M x16 | 8M x8 / 4M x16 | 4M x8 / 2M x16 |
| Access Time | 70 ns | 70 ns | 70 ns | 70 ns | 70 ns |
| Boot Block Position | Bottom (FB) | Bottom (FB) | Top (FT) | Top (FT) | Bottom (DB) |
| Supply Voltage | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
主な差別化要因
- Bottom boot block organization for reset-vector protection （vs M29W064FT70N3E)
- Automotive AEC-Q100 qualification with -40C to +125C range （vs M29W320DB70N3F)
- Only current-revision suffix (F) among verified variants （vs M29W064FB70N3E)
設計ノート
The 48-TSOP footprint requires clean bus routing: keep address lines length-matched within about 10 mm to avoid skew at bus speeds enabled by the 70 ns access time, and place 100 nF ceramic decoupling capacitors at both VCC and VCCQ pins (pins 48 and 36) as close as possible to the package. Separate VCCQ (output buffer supply) from VCC on the power plane or via a ferrite bead if switching noise from nearby DC-DC converters is present, since supply ripple couples directly into output edge rates on parallel flash.
The most frequent integration error with the M29W064FB family is mismatching boot-block position: FB is bottom boot, FT is top boot, and firmware erase/protect maps are not interchangeable even though the devices are pin-to-pin identical. Second, never leave RP# floating - it must be actively driven high for normal operation; a floating RP# places the device in reset and reads will fail intermittently. Third, in byte mode (BYTE# low) the Q15/A-1 pin (pin 44) becomes address A-1 and must be driven; leaving it unconnected causes half the array to be unreachable.
Estimated: at 3.3 V the M29W064F draws its maximum current during program/erase operations (order of 15-20 mA per family data - confirm against the datasheet AC characteristics table). Size the 3.3 V rail for simultaneous read current of all parallel-flash instances plus margin, and hold VCC within 2.7-3.6 V during erase; brown-outs mid-erase can corrupt blocks, so implement a supervisor that holds RP# low until the supply is stable. Avoid powering VCCQ before VCC to prevent bus contention during MCU power-up.
During bulk erase, block-protected sectors are skipped by design, but ensure your driver never issues a chip erase when bootloader sectors carry protection-disabled state after an uncontrolled reset. Add pull-up resistors (about 10 kOhm) on OE# and CE# so the flash outputs stay tri-stated while the MCU resets, preventing bus fights with the boot ROM. For production test access, route the WP# pin to a test point - it is the fastest hardware interlock for factory programming fixtures.
コンプライアンス情報
Automotive AEC-Q100 qualification per datasheets.com parametric data; RoHS/lead-free inferred from the F (RoHS) suffix per Micron part-numbering convention. REACH, halogen-free, and conflict-minerals status not stated in provided data.
