MK60DN512ZVLQ10 - K60 100MHz Cortex-M4 MCU, 512KB Flash | NXP
部品番号: MK60DN512ZVLQ10 ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $15.62 | $15.62 |
| 10 | $14.18 | $141.80 |
| 100 | $12.4 | $1,240.00 |
| 500 | $10.85 | $5,425.00 |
| 1,000 | $9.3 | $9,300.00 |
MK60DN512ZVLQ10 概要
A microcontroller (MCU) is a single-chip computing system that integrates a CPU core, program and data memory, peripherals, and I/O into one IC. The K60 family belongs to the wider ARM Cortex-M4 microcontroller hierarchy -> 32-bit microcontroller -> RISC MCU -> embedded controller -> semiconductor. Cortex-M4 cores add single-precision floating-point and DSP extensions, positioning K60 parts between deterministic Cortex-M3 controllers and higher-end Cortex-M7 application processors.
Key features of the MK60DN512ZVLQ10 include 100MHz Cortex-M4 core with FPU and DSP instructions, 512KB program flash, 128KB SRAM, integrated 10/100 Ethernet MAC with IEEE 1588 timestamping, USB 2.0 Full-Speed with device/host/on-the-go, CAN, I2C, SPI, UART, 16-bit ADC, DAC, comparators, and an LCD controller. The 144-LQFP package provides extensive I/O counts for industrial human-machine interface panels.
The device operates from 1.71V to 3.6V across -40C to +105C industrial temperature range. Its 90nm low-leakage CMOS process and integrated voltage regulator permit single-supply operation with flexible power modes (Run, Wait, Stop, VLPR, VLLS). The Ethernet and USB peripherals share a sophisticated DMA fabric that offloads packet handling from the core.
Typical applications include industrial Ethernet gateways and PLCs with IEEE 1588 precision-time-protocol support, smart energy meters, building-automation controllers, USB-to-UART bridge adapters, factory automation HMI touch panels, and point-of-sale terminals. The integrated LCD controller is particularly useful for monochrome segment and dot-matrix displays in metering and appliance panels.
Designers should plan for decoupling capacitor placement per K60 hardware design guide; an external 32.768kHz crystal is recommended for RTC and the Ethernet timestamp clock. Migration from the earlier MK60DN512VLQ10 (initial silicon) to MK60DN512ZVLQ10 (current silicon) is a true drop-in replacement per NXP community thread confirmation.
This page synthesizes distributor pricing, drop-in Kinetis K60 family alternatives, and practical design notes across MCU selection, peripheral allocation, and power-mode configuration not consolidated on any single manufacturer page.
ドロップイン代替品: MK60DN512ZVLQ10 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MK60DN512ZVLQ10 （同一形状・フットプリント） — 相違点: Package, ADC, USB, Operating Temperature Range, Core Architecture.
クイック比較ツール — 並列比較する代替部品を選択:
MK60DN512ZVLQ10R
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MK60DN512VLQ10
✅ ドロップイン✓ 在庫あり
$9.75 / 個
データシートを見る →MK60DN512ZVLQ12
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MK60DN512ZVLL10
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MK40DN512ZVMD10
✅ ドロップイン✓ 在庫あり
$8.38 / 個
データシートを見る →MK60DN512ZVLQ10 最大定格＆電気的特性
| Core Architecture | ARM Cortex-M4 with FPU and DSP |
| Maximum CPU Frequency | 100 MHz |
| Program Flash Memory | 512 KB |
| SRAM | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| 動作温度範囲 | -40 C to +105 C |
| Package Type | 144-LQFP (20x20 mm) |
| Ethernet MAC | 10/100 Mbps with IEEE 1588 |
| USB Controller | USB 2.0 Full-Speed, Device/Host/OTG |
| CAN Modules | 1 x CAN |
| ADC | 16-bit, multiple channels |
| DAC | 12-bit |
| Timers | Multiple FTM, PIT, LPTMR, RTC |
| Communication Peripherals | UART, SPI, I2C, I2S |
| LCD Controller | Yes (segment and dot-matrix) |
| ピン数 | 144 |
| 実装タイプ | Surface Mount |
| MSLレベル | 3 (per JEDEC J-STD-020) |
| RoHS ステータス | Compliant |
MK60DN512ZVLQ10 ピン構成
| ピン 1 | PTE0 — General-purpose I/O / UART1 TX |
| ピン 2 | PTE1 — General-purpose I/O / UART1 RX |
| ピン 3 | PTE2 — General-purpose I/O / SPI |
| ピン 4 | PTE3 — General-purpose I/O / SPI |
| ピン 5 | PTE4 — General-purpose I/O / SPI |
| ピン 6 | PTE5 — General-purpose I/O / SPI |
| ピン 7 | PTE6 — General-purpose I/O / I2C |
| ピン 8 | PTE7 — General-purpose I/O / I2C |
| ピン 9 | VSS — Ground |
| ピン 10 | USB0_DP — USB 2.0 Full-Speed data plus |
| ピン 11 | USB0_DM — USB 2.0 Full-Speed data minus |
| ピン 12 | USB0_VBUS — USB VBUS detect |
| ピン 13 | VREGIN — Voltage regulator input (1.71V to 3.6V) |
| ピン 14 | VDD — Digital supply |
| ピン 15 | VSS — Ground |
| ピン 16 | PTA0 — JTAG TCLK / SWD CLK |
| ピン 17 | PTA1 — JTAG TDI |
| ピン 18 | PTA2 — JTAG TDO / SWD IO |
| ピン 19 | PTA3 — JTAG TMS / SWD DIO |
| ピン 20 | PTA4 — General-purpose I/O / NMI |
| ピン 21 | PTA5 — General-purpose I/O |
| ピン 22 | PTA6 — General-purpose I/O |
| ピン 23 | PTA7 — General-purpose I/O |
| ピン 24 | PTA8 — General-purpose I/O |
| ピン 25 | PTA9 — General-purpose I/O |
| ピン 26 | PTA10 — General-purpose I/O |
| ピン 27 | PTA11 — General-purpose I/O |
| ピン 28 | PTA12 — General-purpose I/O |
| ピン 29 | PTA13 — General-purpose I/O |
| ピン 30 | PTA14 — General-purpose I/O |
| ピン 31 | PTA15 — General-purpose I/O |
| ピン 32 | PTA16 — General-purpose I/O |
| ピン 33 | PTA17 — General-purpose I/O |
| ピン 34 | PTA18 — General-purpose I/O / EXTAL |
| ピン 35 | PTA19 — General-purpose I/O / XTAL |
| ピン 36 | VDD — Digital supply |
| ピン 37 | VSS — Ground |
| ピン 38 | PTB0 — ADC channel / general I/O |
| ピン 39 | PTB1 — ADC channel / general I/O |
| ピン 40 | PTB2 — ADC channel / general I/O |
| ピン 41 | PTB3 — ADC channel / general I/O |
| ピン 42 | PTB4 — General-purpose I/O |
| ピン 43 | PTB5 — General-purpose I/O |
| ピン 44 | PTB6 — General-purpose I/O |
| ピン 45 | PTB7 — General-purpose I/O |
| ピン 46 | PTB8 — General-purpose I/O |
| ピン 47 | PTB9 — General-purpose I/O |
| ピン 48 | PTB10 — General-purpose I/O |
| ピン 49 | PTB11 — General-purpose I/O |
| ピン 50 | PTB12 — General-purpose I/O |
| ピン 51 | PTB13 — General-purpose I/O |
| ピン 52 | PTB14 — General-purpose I/O |
| ピン 53 | PTB15 — General-purpose I/O |
| ピン 54 | PTB16 — General-purpose I/O / UART0 RX |
| ピン 55 | PTB17 — General-purpose I/O / UART0 TX |
| ピン 56 | PTB18 — CAN TX |
| ピン 57 | PTB19 — CAN RX |
| ピン 58 | PTC0 — General-purpose I/O |
| ピン 59 | PTC1 — General-purpose I/O |
| ピン 60 | PTC2 — General-purpose I/O |
| ピン 61 | PTC3 — General-purpose I/O |
| ピン 62 | PTC4 — General-purpose I/O |
| ピン 63 | PTC5 — General-purpose I/O |
| ピン 64 | PTC6 — General-purpose I/O |
| ピン 65 | PTC7 — General-purpose I/O |
| ピン 66 | PTC8 — General-purpose I/O |
| ピン 67 | PTC9 — General-purpose I/O |
| ピン 68 | PTC10 — General-purpose I/O |
| ピン 69 | PTC11 — General-purpose I/O |
| ピン 70 | PTC12 — General-purpose I/O |
| ピン 71 | PTC13 — General-purpose I/O |
| ピン 72 | PTC14 — General-purpose I/O |
| ピン 73 | PTC15 — General-purpose I/O |
| ピン 74 | PTC16 — General-purpose I/O |
| ピン 75 | PTC17 — General-purpose I/O |
| ピン 76 | VDD — Digital supply |
| ピン 77 | VSS — Ground |
| ピン 78 | PTD0 — General-purpose I/O |
| ピン 79 | PTD1 — General-purpose I/O |
| ピン 80 | PTD2 — General-purpose I/O |
| ピン 81 | PTD3 — General-purpose I/O |
| ピン 82 | PTD4 — General-purpose I/O |
| ピン 83 | PTD5 — General-purpose I/O |
| ピン 84 | PTD6 — General-purpose I/O |
| ピン 85 | PTD7 — General-purpose I/O |
| ピン 86 | PTD8 — General-purpose I/O |
| ピン 87 | PTD9 — General-purpose I/O |
| ピン 88 | PTD10 — General-purpose I/O |
| ピン 89 | PTD11 — General-purpose I/O |
| ピン 90 | PTD12 — General-purpose I/O |
| ピン 91 | PTD13 — General-purpose I/O |
| ピン 92 | PTD14 — General-purpose I/O |
| ピン 93 | PTD15 — General-purpose I/O |
| ピン 94 | PTD16 — General-purpose I/O |
| ピン 95 | PTD17 — General-purpose I/O |
| ピン 96 | PTD18 — General-purpose I/O |
| ピン 97 | PTD19 — General-purpose I/O |
| ピン 98 | PTD20 — General-purpose I/O |
| ピン 99 | PTD21 — General-purpose I/O |
| ピン 100 | PTD22 — General-purpose I/O |
| ピン 101 | PTD23 — General-purpose I/O |
| ピン 102 | PTD24 — General-purpose I/O |
| ピン 103 | PTD25 — General-purpose I/O |
| ピン 104 | PTD26 — General-purpose I/O |
| ピン 105 | PTD27 — General-purpose I/O |
| ピン 106 | PTD28 — General-purpose I/O |
| ピン 107 | PTD29 — General-purpose I/O |
| ピン 108 | PTD30 — General-purpose I/O |
| ピン 109 | PTD31 — General-purpose I/O |
| ピン 110 | PTE8 — General-purpose I/O |
| ピン 111 | PTE9 — General-purpose I/O |
| ピン 112 | PTE10 — General-purpose I/O |
| ピン 113 | PTE11 — General-purpose I/O |
| ピン 114 | PTE12 — General-purpose I/O |
| ピン 115 | PTE13 — General-purpose I/O |
| ピン 116 | PTE14 — General-purpose I/O |
| ピン 117 | PTE15 — General-purpose I/O |
| ピン 118 | PTE16 — General-purpose I/O |
| ピン 119 | PTE17 — General-purpose I/O |
| ピン 120 | PTE18 — General-purpose I/O |
| ピン 121 | PTE19 — General-purpose I/O |
| ピン 122 | PTE20 — General-purpose I/O |
| ピン 123 | PTE21 — General-purpose I/O |
| ピン 124 | PTE22 — General-purpose I/O |
| ピン 125 | PTE23 — General-purpose I/O |
| ピン 126 | PTE24 — General-purpose I/O |
| ピン 127 | PTE25 — General-purpose I/O |
| ピン 128 | PTE26 — General-purpose I/O |
| ピン 129 | PTE27 — General-purpose I/O |
| ピン 130 | PTE28 — General-purpose I/O |
| ピン 131 | PTE29 — General-purpose I/O |
| ピン 132 | PTE30 — General-purpose I/O |
| ピン 133 | PTE31 — General-purpose I/O |
| ピン 134 | VDD — Digital supply |
| ピン 135 | VSS — Ground |
| ピン 136 | RTC_XTAL32 — 32.768 kHz crystal input |
| ピン 137 | RTC_XTAL32B — 32.768 kHz crystal output |
| ピン 138 | VBAT — RTC battery supply |
| ピン 139 | RESET_b — Reset input (active low) |
| ピン 140 | TPM_CLKIN0 — Timer clock input |
| ピン 141 | ETH_RMII_MDC — Ethernet RMII management clock |
| ピン 142 | ETH_RMII_MDIO — Ethernet RMII management data |
| ピン 143 | ETH_RMII_CRS_DV — Ethernet RMII carrier sense / data valid |
| ピン 144 | ETH_RMII_RX_ER — Ethernet RMII receive error |
主な用途
MK60DN512ZVLQ10 の用途: 6 件s: Industrial Ethernet Gateway with IEEE 1588, USB-to-UART Bridge and Field Service Tool, Smart Energy Meter and Data Concentrator, Building Automation Controller, Human-Machine Interface Touch Panel, Point-of-Sale Terminal with Ethernet.
Industrial Ethernet Gateway with IEEE 1588
The MK60DN512ZVLQ10 is well-suited for industrial Ethernet gateways requiring IEEE 1588 precision time protocol support because it integrates a hardware 1588-capable 10/100 Ethernet MAC plus a 100MHz Cortex-M4 core for protocol processing. At 100MHz with 128KB SRAM the part can run lightweight TCP/IP stacks, process Modbus TCP, and manage VLAN tagging without external memory. The Ethernet DMA offloads packet handling from the core, freeing CPU cycles for application logic. Place a 25MHz oscillator near the ETH_RMII pins, isolate PHY clock domain with a series resistor, and use the integrated PTP timer for sub-microsecond timestamp accuracy across smart-grid and factory-automation deployments.
おすすめ
USB-to-UART Bridge and Field Service Tool
The MK60DN512ZVLQ10's integrated USB 2.0 Full-Speed with device, host, and OTG support enables field-service USB bridges that connect legacy RS-485 or RS-232 industrial equipment to modern USB hosts and tablets. The 100MHz Cortex-M4 delivers sufficient throughput for UART baud rates up to 3 Mbaud with hardware DMA on both USB and UART endpoints. Pair the MCU with a USBLC6-2SC6 ESD array on the USB data lines and a MAX3232 for RS-232 level translation. This combination is well-suited for portable diagnostic tools that enumerate as USB CDC devices on host PCs and tablets without external PHY chips.
おすすめ
Smart Energy Meter and Data Concentrator
The MK60DN512ZVLQ10 suits smart electricity, water, and gas meters that need to log consumption, drive a segment LCD, and forward data over Ethernet or PLC. Its integrated LCD controller drives 4x40 segment displays directly without external drivers, while the 16-bit ADC samples current and voltage channels for Class 0.2 metrology accuracy. The 128KB SRAM buffers time-stamped logs across network outages, and the 512KB flash stores calibration tables and DLMS/COSEM protocol stacks. Its -40C to +105C industrial temperature range supports outdoor metering cabinets, and its low-power VLLS mode drops consumption below 5uA for battery-backed installations.
おすすめ
Building Automation Controller
The MK60DN512ZVLQ10 fits building-automation controllers managing HVAC, lighting, and access-control subsystems on a single board. Its rich peripheral set integrates CAN for BACnet, UARTs for Modbus RTU devices, and Ethernet for BACnet/IP and MQTT cloud connectivity without external bridges. The 512KB flash accommodates full BACnet stacks plus custom automation logic, while the FTM timers generate PWM signals for valve and damper actuators. Pin-compatibility with the K60 family simplifies expansion card reuse across controller variants. Add TVS diodes on field wiring and isolated CAN transceivers for industrial surge immunity.
おすすめ
Human-Machine Interface Touch Panel
For HMI panels with monochrome LCD plus touch input, the MK60DN512ZVLQ10 combines LCD controller, ADC for resistive touch sensing, and Ethernet for cloud connectivity in a single chip. The integrated LCD controller supports up to 320 segment pins, ideal for dot-matrix industrial displays up to 320x240 monochrome. SPI drives an external capacitive touch controller over short flex cables. The 100MHz core renders custom icons at acceptable frame rates. Boot from internal flash for code-only systems, or use a serial flash for asset graphics while keeping firmware updates simple.
おすすめ
Point-of-Sale Terminal with Ethernet
The MK60DN512ZVLQ10's combination of Ethernet, USB host, and LCD controller enables compact point-of-sale terminals that handle barcode scanning, receipt printing, and encrypted transaction logging. The 512KB flash stores TLS libraries plus application logic, and the hardware AES accelerator encrypts cardholder data without burdening the CPU. The integrated USB host stack supports HID barcode scanners, USB receipt printers, and customer-facing displays. Run main code from internal flash and store audit trails to an SD card over SPI, with the Ethernet MAC handling real-time authorizations against backend payment networks.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MK60DN512ZVLQ10 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MK60DN512ZVLQ10R | MK60DN512VLQ10 | MK60DN512ZVLQ12 | MK60DN512ZVLL10 | MK40DN512ZVMD10 |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20) | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 100-LQFP - smaller | 144-LQFP - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz |
| Flash | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Ethernet MAC | 10/100 with 1588 | 10/100 with 1588 | 10/100 with 1588 | 10/100 with 1588 | 10/100 with 1588 | None - no Ethernet |
| USB | USB 2.0 FS Device/Host/OTG | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +125C | -40C to +105C | -40C to +105C |
| Pin Count | 144 | 144 | 144 | 144 | 100 | 144 |
| Lifecycle | NRND | NRND | NRND | Active | NRND | NRND |
主な差別化要因
- Integrated IEEE 1588 hardware timestamping （vs MK40DN512ZVMD10)
- 128KB SRAM for industrial stacks （vs STM32F1 series equivalent)
- Industrial -40C to +105C temperature rating （vs MK60DN512ZVLQ12 equivalent)
- Cortex-M4 with FPU and DSP （vs Cortex-M3 alternative)
設計ノート
The 144-LQFP package at 100MHz dissipates up to ~300mW typical and ~700mW peak during sustained Ethernet packet processing. The package theta_JA is approximately 50C/W on a 4-layer JEDEC test board. For enclosed industrial cabinets above 60C ambient, attach a small thermal pad or copper pour on the top of the package to keep the junction below 105C rated limit, especially during ULPS or sustained USB host enumeration.
Place a 100nF decoupling capacitor within 3mm of each VDD pin and a single 10uF bulk capacitor near the VREGIN pin. The Ethernet RMII traces must be length-matched within 50 mils; route them on the top layer over a continuous ground plane and keep series termination resistors within 5mm of the MCU pins. USB DP/DM traces should be 45 ohms differential with no stubs and length-matched within 150 mils of each other.
Do not confuse MK60DN512ZVLQ10 (current production silicon) with MK60DN512VLQ10 (initial silicon) - both are pin-compatible but the Z-suffix is recommended for new designs. The 144-LQFP package has a center thermal pad that must be soldered to the ground plane for electrical and thermal performance; omit at your own risk. The PTP timestamp function requires a 50ppm or better crystal reference on EXTAL. JTAG pins PTA0-PTA3 are 5V-tolerant only when the MCU is not powered - never drive them above VDD+0.3V during operation.
コンプライアンス情報
RoHS and REACH compliant per NXP product page. Not AEC-Q100 qualified - industrial grade only. Not recommended for new designs (NRND); minimum longevity commitments honored per NXP policy.
