MK60DN512ZVLQ10 - K60 100MHz Cortex-M4 MCU, 512KB Flash | NXP
料号： MK60DN512ZVLQ10 ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $15.62 | $15.62 |
| 10 | $14.18 | $141.80 |
| 100 | $12.4 | $1,240.00 |
| 500 | $10.85 | $5,425.00 |
| 1,000 | $9.3 | $9,300.00 |
MK60DN512ZVLQ10 概述
A microcontroller (MCU) is a single-chip computing system that integrates a CPU core, program and data memory, peripherals, and I/O into one IC. The K60 family belongs to the wider ARM Cortex-M4 microcontroller hierarchy -> 32-bit microcontroller -> RISC MCU -> embedded controller -> semiconductor. Cortex-M4 cores add single-precision floating-point and DSP extensions, positioning K60 parts between deterministic Cortex-M3 controllers and higher-end Cortex-M7 application processors.
Key features of the MK60DN512ZVLQ10 include 100MHz Cortex-M4 core with FPU and DSP instructions, 512KB program flash, 128KB SRAM, integrated 10/100 Ethernet MAC with IEEE 1588 timestamping, USB 2.0 Full-Speed with device/host/on-the-go, CAN, I2C, SPI, UART, 16-bit ADC, DAC, comparators, and an LCD controller. The 144-LQFP package provides extensive I/O counts for industrial human-machine interface panels.
The device operates from 1.71V to 3.6V across -40C to +105C industrial temperature range. Its 90nm low-leakage CMOS process and integrated voltage regulator permit single-supply operation with flexible power modes (Run, Wait, Stop, VLPR, VLLS). The Ethernet and USB peripherals share a sophisticated DMA fabric that offloads packet handling from the core.
Typical applications include industrial Ethernet gateways and PLCs with IEEE 1588 precision-time-protocol support, smart energy meters, building-automation controllers, USB-to-UART bridge adapters, factory automation HMI touch panels, and point-of-sale terminals. The integrated LCD controller is particularly useful for monochrome segment and dot-matrix displays in metering and appliance panels.
Designers should plan for decoupling capacitor placement per K60 hardware design guide; an external 32.768kHz crystal is recommended for RTC and the Ethernet timestamp clock. Migration from the earlier MK60DN512VLQ10 (initial silicon) to MK60DN512ZVLQ10 (current silicon) is a true drop-in replacement per NXP community thread confirmation.
This page synthesizes distributor pricing, drop-in Kinetis K60 family alternatives, and practical design notes across MCU selection, peripheral allocation, and power-mode configuration not consolidated on any single manufacturer page.
直接替换替代料： MK60DN512ZVLQ10 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MK60DN512ZVLQ10 （相同外形与封装尺寸） ——差异在于 Package, ADC, USB, Operating Temperature Range, Core Architecture.
快速对比工具——选择替代料号进行并排对比：
MK60DN512ZVLQ10R
✅ 直接替换📋 参考替代料（不在目录中）
MK60DN512VLQ10
✅ 直接替换✓ 有现货
$9.75 / 个
查看数据手册 →MK60DN512ZVLQ12
✅ 直接替换📋 参考替代料（不在目录中）
MK60DN512ZVLL10
✅ 直接替换📋 参考替代料（不在目录中）
MK40DN512ZVMD10
✅ 直接替换✓ 有现货
$8.38 / 个
查看数据手册 →MK60DN512ZVLQ10 最大额定值与电气特性
| Core Architecture | ARM Cortex-M4 with FPU and DSP |
| Maximum CPU Frequency | 100 MHz |
| Program Flash Memory | 512 KB |
| SRAM | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| 工作温度范围 | -40 C to +105 C |
| Package Type | 144-LQFP (20x20 mm) |
| Ethernet MAC | 10/100 Mbps with IEEE 1588 |
| USB Controller | USB 2.0 Full-Speed, Device/Host/OTG |
| CAN Modules | 1 x CAN |
| ADC | 16-bit, multiple channels |
| DAC | 12-bit |
| Timers | Multiple FTM, PIT, LPTMR, RTC |
| Communication Peripherals | UART, SPI, I2C, I2S |
| LCD Controller | Yes (segment and dot-matrix) |
| 引脚数量 | 144 |
| 安装类型 | Surface Mount |
| MSL 等级 | 3 (per JEDEC J-STD-020) |
| RoHS 状态 | Compliant |
MK60DN512ZVLQ10 引脚配置
| 引脚 1 | PTE0 — General-purpose I/O / UART1 TX |
| 引脚 2 | PTE1 — General-purpose I/O / UART1 RX |
| 引脚 3 | PTE2 — General-purpose I/O / SPI |
| 引脚 4 | PTE3 — General-purpose I/O / SPI |
| 引脚 5 | PTE4 — General-purpose I/O / SPI |
| 引脚 6 | PTE5 — General-purpose I/O / SPI |
| 引脚 7 | PTE6 — General-purpose I/O / I2C |
| 引脚 8 | PTE7 — General-purpose I/O / I2C |
| 引脚 9 | VSS — Ground |
| 引脚 10 | USB0_DP — USB 2.0 Full-Speed data plus |
| 引脚 11 | USB0_DM — USB 2.0 Full-Speed data minus |
| 引脚 12 | USB0_VBUS — USB VBUS detect |
| 引脚 13 | VREGIN — Voltage regulator input (1.71V to 3.6V) |
| 引脚 14 | VDD — Digital supply |
| 引脚 15 | VSS — Ground |
| 引脚 16 | PTA0 — JTAG TCLK / SWD CLK |
| 引脚 17 | PTA1 — JTAG TDI |
| 引脚 18 | PTA2 — JTAG TDO / SWD IO |
| 引脚 19 | PTA3 — JTAG TMS / SWD DIO |
| 引脚 20 | PTA4 — General-purpose I/O / NMI |
| 引脚 21 | PTA5 — General-purpose I/O |
| 引脚 22 | PTA6 — General-purpose I/O |
| 引脚 23 | PTA7 — General-purpose I/O |
| 引脚 24 | PTA8 — General-purpose I/O |
| 引脚 25 | PTA9 — General-purpose I/O |
| 引脚 26 | PTA10 — General-purpose I/O |
| 引脚 27 | PTA11 — General-purpose I/O |
| 引脚 28 | PTA12 — General-purpose I/O |
| 引脚 29 | PTA13 — General-purpose I/O |
| 引脚 30 | PTA14 — General-purpose I/O |
| 引脚 31 | PTA15 — General-purpose I/O |
| 引脚 32 | PTA16 — General-purpose I/O |
| 引脚 33 | PTA17 — General-purpose I/O |
| 引脚 34 | PTA18 — General-purpose I/O / EXTAL |
| 引脚 35 | PTA19 — General-purpose I/O / XTAL |
| 引脚 36 | VDD — Digital supply |
| 引脚 37 | VSS — Ground |
| 引脚 38 | PTB0 — ADC channel / general I/O |
| 引脚 39 | PTB1 — ADC channel / general I/O |
| 引脚 40 | PTB2 — ADC channel / general I/O |
| 引脚 41 | PTB3 — ADC channel / general I/O |
| 引脚 42 | PTB4 — General-purpose I/O |
| 引脚 43 | PTB5 — General-purpose I/O |
| 引脚 44 | PTB6 — General-purpose I/O |
| 引脚 45 | PTB7 — General-purpose I/O |
| 引脚 46 | PTB8 — General-purpose I/O |
| 引脚 47 | PTB9 — General-purpose I/O |
| 引脚 48 | PTB10 — General-purpose I/O |
| 引脚 49 | PTB11 — General-purpose I/O |
| 引脚 50 | PTB12 — General-purpose I/O |
| 引脚 51 | PTB13 — General-purpose I/O |
| 引脚 52 | PTB14 — General-purpose I/O |
| 引脚 53 | PTB15 — General-purpose I/O |
| 引脚 54 | PTB16 — General-purpose I/O / UART0 RX |
| 引脚 55 | PTB17 — General-purpose I/O / UART0 TX |
| 引脚 56 | PTB18 — CAN TX |
| 引脚 57 | PTB19 — CAN RX |
| 引脚 58 | PTC0 — General-purpose I/O |
| 引脚 59 | PTC1 — General-purpose I/O |
| 引脚 60 | PTC2 — General-purpose I/O |
| 引脚 61 | PTC3 — General-purpose I/O |
| 引脚 62 | PTC4 — General-purpose I/O |
| 引脚 63 | PTC5 — General-purpose I/O |
| 引脚 64 | PTC6 — General-purpose I/O |
| 引脚 65 | PTC7 — General-purpose I/O |
| 引脚 66 | PTC8 — General-purpose I/O |
| 引脚 67 | PTC9 — General-purpose I/O |
| 引脚 68 | PTC10 — General-purpose I/O |
| 引脚 69 | PTC11 — General-purpose I/O |
| 引脚 70 | PTC12 — General-purpose I/O |
| 引脚 71 | PTC13 — General-purpose I/O |
| 引脚 72 | PTC14 — General-purpose I/O |
| 引脚 73 | PTC15 — General-purpose I/O |
| 引脚 74 | PTC16 — General-purpose I/O |
| 引脚 75 | PTC17 — General-purpose I/O |
| 引脚 76 | VDD — Digital supply |
| 引脚 77 | VSS — Ground |
| 引脚 78 | PTD0 — General-purpose I/O |
| 引脚 79 | PTD1 — General-purpose I/O |
| 引脚 80 | PTD2 — General-purpose I/O |
| 引脚 81 | PTD3 — General-purpose I/O |
| 引脚 82 | PTD4 — General-purpose I/O |
| 引脚 83 | PTD5 — General-purpose I/O |
| 引脚 84 | PTD6 — General-purpose I/O |
| 引脚 85 | PTD7 — General-purpose I/O |
| 引脚 86 | PTD8 — General-purpose I/O |
| 引脚 87 | PTD9 — General-purpose I/O |
| 引脚 88 | PTD10 — General-purpose I/O |
| 引脚 89 | PTD11 — General-purpose I/O |
| 引脚 90 | PTD12 — General-purpose I/O |
| 引脚 91 | PTD13 — General-purpose I/O |
| 引脚 92 | PTD14 — General-purpose I/O |
| 引脚 93 | PTD15 — General-purpose I/O |
| 引脚 94 | PTD16 — General-purpose I/O |
| 引脚 95 | PTD17 — General-purpose I/O |
| 引脚 96 | PTD18 — General-purpose I/O |
| 引脚 97 | PTD19 — General-purpose I/O |
| 引脚 98 | PTD20 — General-purpose I/O |
| 引脚 99 | PTD21 — General-purpose I/O |
| 引脚 100 | PTD22 — General-purpose I/O |
| 引脚 101 | PTD23 — General-purpose I/O |
| 引脚 102 | PTD24 — General-purpose I/O |
| 引脚 103 | PTD25 — General-purpose I/O |
| 引脚 104 | PTD26 — General-purpose I/O |
| 引脚 105 | PTD27 — General-purpose I/O |
| 引脚 106 | PTD28 — General-purpose I/O |
| 引脚 107 | PTD29 — General-purpose I/O |
| 引脚 108 | PTD30 — General-purpose I/O |
| 引脚 109 | PTD31 — General-purpose I/O |
| 引脚 110 | PTE8 — General-purpose I/O |
| 引脚 111 | PTE9 — General-purpose I/O |
| 引脚 112 | PTE10 — General-purpose I/O |
| 引脚 113 | PTE11 — General-purpose I/O |
| 引脚 114 | PTE12 — General-purpose I/O |
| 引脚 115 | PTE13 — General-purpose I/O |
| 引脚 116 | PTE14 — General-purpose I/O |
| 引脚 117 | PTE15 — General-purpose I/O |
| 引脚 118 | PTE16 — General-purpose I/O |
| 引脚 119 | PTE17 — General-purpose I/O |
| 引脚 120 | PTE18 — General-purpose I/O |
| 引脚 121 | PTE19 — General-purpose I/O |
| 引脚 122 | PTE20 — General-purpose I/O |
| 引脚 123 | PTE21 — General-purpose I/O |
| 引脚 124 | PTE22 — General-purpose I/O |
| 引脚 125 | PTE23 — General-purpose I/O |
| 引脚 126 | PTE24 — General-purpose I/O |
| 引脚 127 | PTE25 — General-purpose I/O |
| 引脚 128 | PTE26 — General-purpose I/O |
| 引脚 129 | PTE27 — General-purpose I/O |
| 引脚 130 | PTE28 — General-purpose I/O |
| 引脚 131 | PTE29 — General-purpose I/O |
| 引脚 132 | PTE30 — General-purpose I/O |
| 引脚 133 | PTE31 — General-purpose I/O |
| 引脚 134 | VDD — Digital supply |
| 引脚 135 | VSS — Ground |
| 引脚 136 | RTC_XTAL32 — 32.768 kHz crystal input |
| 引脚 137 | RTC_XTAL32B — 32.768 kHz crystal output |
| 引脚 138 | VBAT — RTC battery supply |
| 引脚 139 | RESET_b — Reset input (active low) |
| 引脚 140 | TPM_CLKIN0 — Timer clock input |
| 引脚 141 | ETH_RMII_MDC — Ethernet RMII management clock |
| 引脚 142 | ETH_RMII_MDIO — Ethernet RMII management data |
| 引脚 143 | ETH_RMII_CRS_DV — Ethernet RMII carrier sense / data valid |
| 引脚 144 | ETH_RMII_RX_ER — Ethernet RMII receive error |
典型应用
MK60DN512ZVLQ10 适用于 6 应用s: Industrial Ethernet Gateway with IEEE 1588, USB-to-UART Bridge and Field Service Tool, Smart Energy Meter and Data Concentrator, Building Automation Controller, Human-Machine Interface Touch Panel, Point-of-Sale Terminal with Ethernet.
Industrial Ethernet Gateway with IEEE 1588
The MK60DN512ZVLQ10 is well-suited for industrial Ethernet gateways requiring IEEE 1588 precision time protocol support because it integrates a hardware 1588-capable 10/100 Ethernet MAC plus a 100MHz Cortex-M4 core for protocol processing. At 100MHz with 128KB SRAM the part can run lightweight TCP/IP stacks, process Modbus TCP, and manage VLAN tagging without external memory. The Ethernet DMA offloads packet handling from the core, freeing CPU cycles for application logic. Place a 25MHz oscillator near the ETH_RMII pins, isolate PHY clock domain with a series resistor, and use the integrated PTP timer for sub-microsecond timestamp accuracy across smart-grid and factory-automation deployments.
推荐
USB-to-UART Bridge and Field Service Tool
The MK60DN512ZVLQ10's integrated USB 2.0 Full-Speed with device, host, and OTG support enables field-service USB bridges that connect legacy RS-485 or RS-232 industrial equipment to modern USB hosts and tablets. The 100MHz Cortex-M4 delivers sufficient throughput for UART baud rates up to 3 Mbaud with hardware DMA on both USB and UART endpoints. Pair the MCU with a USBLC6-2SC6 ESD array on the USB data lines and a MAX3232 for RS-232 level translation. This combination is well-suited for portable diagnostic tools that enumerate as USB CDC devices on host PCs and tablets without external PHY chips.
推荐
Smart Energy Meter and Data Concentrator
The MK60DN512ZVLQ10 suits smart electricity, water, and gas meters that need to log consumption, drive a segment LCD, and forward data over Ethernet or PLC. Its integrated LCD controller drives 4x40 segment displays directly without external drivers, while the 16-bit ADC samples current and voltage channels for Class 0.2 metrology accuracy. The 128KB SRAM buffers time-stamped logs across network outages, and the 512KB flash stores calibration tables and DLMS/COSEM protocol stacks. Its -40C to +105C industrial temperature range supports outdoor metering cabinets, and its low-power VLLS mode drops consumption below 5uA for battery-backed installations.
推荐
Building Automation Controller
The MK60DN512ZVLQ10 fits building-automation controllers managing HVAC, lighting, and access-control subsystems on a single board. Its rich peripheral set integrates CAN for BACnet, UARTs for Modbus RTU devices, and Ethernet for BACnet/IP and MQTT cloud connectivity without external bridges. The 512KB flash accommodates full BACnet stacks plus custom automation logic, while the FTM timers generate PWM signals for valve and damper actuators. Pin-compatibility with the K60 family simplifies expansion card reuse across controller variants. Add TVS diodes on field wiring and isolated CAN transceivers for industrial surge immunity.
推荐
Human-Machine Interface Touch Panel
For HMI panels with monochrome LCD plus touch input, the MK60DN512ZVLQ10 combines LCD controller, ADC for resistive touch sensing, and Ethernet for cloud connectivity in a single chip. The integrated LCD controller supports up to 320 segment pins, ideal for dot-matrix industrial displays up to 320x240 monochrome. SPI drives an external capacitive touch controller over short flex cables. The 100MHz core renders custom icons at acceptable frame rates. Boot from internal flash for code-only systems, or use a serial flash for asset graphics while keeping firmware updates simple.
推荐
Point-of-Sale Terminal with Ethernet
The MK60DN512ZVLQ10's combination of Ethernet, USB host, and LCD controller enables compact point-of-sale terminals that handle barcode scanning, receipt printing, and encrypted transaction logging. The 512KB flash stores TLS libraries plus application logic, and the hardware AES accelerator encrypts cardholder data without burdening the CPU. The integrated USB host stack supports HID barcode scanners, USB receipt printers, and customer-facing displays. Run main code from internal flash and store audit trails to an SD card over SPI, with the Ethernet MAC handling real-time authorizations against backend payment networks.
推荐
推荐产品汇总
工程参考数据： MK60DN512ZVLQ10 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MK60DN512ZVLQ10R | MK60DN512VLQ10 | MK60DN512ZVLQ12 | MK60DN512ZVLL10 | MK40DN512ZVMD10 |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20) | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 100-LQFP - smaller | 144-LQFP - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz |
| Flash | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Ethernet MAC | 10/100 with 1588 | 10/100 with 1588 | 10/100 with 1588 | 10/100 with 1588 | 10/100 with 1588 | None - no Ethernet |
| USB | USB 2.0 FS Device/Host/OTG | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +125C | -40C to +105C | -40C to +105C |
| Pin Count | 144 | 144 | 144 | 144 | 100 | 144 |
| Lifecycle | NRND | NRND | NRND | Active | NRND | NRND |
关键差异点
- Integrated IEEE 1588 hardware timestamping （对比 MK40DN512ZVMD10)
- 128KB SRAM for industrial stacks （对比 STM32F1 series equivalent)
- Industrial -40C to +105C temperature rating （对比 MK60DN512ZVLQ12 equivalent)
- Cortex-M4 with FPU and DSP （对比 Cortex-M3 alternative)
设计说明
The 144-LQFP package at 100MHz dissipates up to ~300mW typical and ~700mW peak during sustained Ethernet packet processing. The package theta_JA is approximately 50C/W on a 4-layer JEDEC test board. For enclosed industrial cabinets above 60C ambient, attach a small thermal pad or copper pour on the top of the package to keep the junction below 105C rated limit, especially during ULPS or sustained USB host enumeration.
Place a 100nF decoupling capacitor within 3mm of each VDD pin and a single 10uF bulk capacitor near the VREGIN pin. The Ethernet RMII traces must be length-matched within 50 mils; route them on the top layer over a continuous ground plane and keep series termination resistors within 5mm of the MCU pins. USB DP/DM traces should be 45 ohms differential with no stubs and length-matched within 150 mils of each other.
Do not confuse MK60DN512ZVLQ10 (current production silicon) with MK60DN512VLQ10 (initial silicon) - both are pin-compatible but the Z-suffix is recommended for new designs. The 144-LQFP package has a center thermal pad that must be soldered to the ground plane for electrical and thermal performance; omit at your own risk. The PTP timestamp function requires a 50ppm or better crystal reference on EXTAL. JTAG pins PTA0-PTA3 are 5V-tolerant only when the MCU is not powered - never drive them above VDD+0.3V during operation.
合规信息
RoHS and REACH compliant per NXP product page. Not AEC-Q100 qualified - industrial grade only. Not recommended for new designs (NRND); minimum longevity commitments honored per NXP policy.
