MK60DN512ZVLQ10 - K60 100MHz Cortex-M4 MCU, 512KB Flash | NXP
N.º da peça: MK60DN512ZVLQ10 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $15.62 | $15,62 |
| 10 | $14.18 | $141,80 |
| 100 | $12.4 | $1.240,00 |
| 500 | $10.85 | $5.425,00 |
| 1.000 | $9.3 | $9.300,00 |
MK60DN512ZVLQ10 Visão geral
A microcontroller (MCU) is a single-chip computing system that integrates a CPU core, program and data memory, peripherals, and I/O into one IC. The K60 family belongs to the wider ARM Cortex-M4 microcontroller hierarchy -> 32-bit microcontroller -> RISC MCU -> embedded controller -> semiconductor. Cortex-M4 cores add single-precision floating-point and DSP extensions, positioning K60 parts between deterministic Cortex-M3 controllers and higher-end Cortex-M7 application processors.
Key features of the MK60DN512ZVLQ10 include 100MHz Cortex-M4 core with FPU and DSP instructions, 512KB program flash, 128KB SRAM, integrated 10/100 Ethernet MAC with IEEE 1588 timestamping, USB 2.0 Full-Speed with device/host/on-the-go, CAN, I2C, SPI, UART, 16-bit ADC, DAC, comparators, and an LCD controller. The 144-LQFP package provides extensive I/O counts for industrial human-machine interface panels.
The device operates from 1.71V to 3.6V across -40C to +105C industrial temperature range. Its 90nm low-leakage CMOS process and integrated voltage regulator permit single-supply operation with flexible power modes (Run, Wait, Stop, VLPR, VLLS). The Ethernet and USB peripherals share a sophisticated DMA fabric that offloads packet handling from the core.
Typical applications include industrial Ethernet gateways and PLCs with IEEE 1588 precision-time-protocol support, smart energy meters, building-automation controllers, USB-to-UART bridge adapters, factory automation HMI touch panels, and point-of-sale terminals. The integrated LCD controller is particularly useful for monochrome segment and dot-matrix displays in metering and appliance panels.
Designers should plan for decoupling capacitor placement per K60 hardware design guide; an external 32.768kHz crystal is recommended for RTC and the Ethernet timestamp clock. Migration from the earlier MK60DN512VLQ10 (initial silicon) to MK60DN512ZVLQ10 (current silicon) is a true drop-in replacement per NXP community thread confirmation.
This page synthesizes distributor pricing, drop-in Kinetis K60 family alternatives, and practical design notes across MCU selection, peripheral allocation, and power-mode configuration not consolidated on any single manufacturer page.
Alternativas drop-in para MK60DN512ZVLQ10 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MK60DN512ZVLQ10 (mesmo formato e footprint) — diferindo em Package, ADC, USB, Operating Temperature Range, Core Architecture.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MK60DN512ZVLQ10R
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MK60DN512VLQ10
✅ Drop-In✓ Em estoque
$9.75 / unidade
Ver ficha técnica →MK60DN512ZVLQ12
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MK60DN512ZVLL10
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MK40DN512ZVMD10
✅ Drop-In✓ Em estoque
$8.38 / unidade
Ver ficha técnica →MK60DN512ZVLQ10 Classificações máximas e características elétricas
| Core Architecture | ARM Cortex-M4 with FPU and DSP |
| Maximum CPU Frequency | 100 MHz |
| Program Flash Memory | 512 KB |
| SRAM | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Faixa de temperatura de operação | -40 C to +105 C |
| Package Type | 144-LQFP (20x20 mm) |
| Ethernet MAC | 10/100 Mbps with IEEE 1588 |
| USB Controller | USB 2.0 Full-Speed, Device/Host/OTG |
| CAN Modules | 1 x CAN |
| ADC | 16-bit, multiple channels |
| DAC | 12-bit |
| Timers | Multiple FTM, PIT, LPTMR, RTC |
| Communication Peripherals | UART, SPI, I2C, I2S |
| LCD Controller | Yes (segment and dot-matrix) |
| Contagem de pinos | 144 |
| Tipo de montagem | Surface Mount |
| Nível MSL | 3 (per JEDEC J-STD-020) |
| Status RoHS | Compliant |
Configuração de pinos do MK60DN512ZVLQ10
| Pino 1 | PTE0 — General-purpose I/O / UART1 TX |
| Pino 2 | PTE1 — General-purpose I/O / UART1 RX |
| Pino 3 | PTE2 — General-purpose I/O / SPI |
| Pino 4 | PTE3 — General-purpose I/O / SPI |
| Pino 5 | PTE4 — General-purpose I/O / SPI |
| Pino 6 | PTE5 — General-purpose I/O / SPI |
| Pino 7 | PTE6 — General-purpose I/O / I2C |
| Pino 8 | PTE7 — General-purpose I/O / I2C |
| Pino 9 | VSS — Ground |
| Pino 10 | USB0_DP — USB 2.0 Full-Speed data plus |
| Pino 11 | USB0_DM — USB 2.0 Full-Speed data minus |
| Pino 12 | USB0_VBUS — USB VBUS detect |
| Pino 13 | VREGIN — Voltage regulator input (1.71V to 3.6V) |
| Pino 14 | VDD — Digital supply |
| Pino 15 | VSS — Ground |
| Pino 16 | PTA0 — JTAG TCLK / SWD CLK |
| Pino 17 | PTA1 — JTAG TDI |
| Pino 18 | PTA2 — JTAG TDO / SWD IO |
| Pino 19 | PTA3 — JTAG TMS / SWD DIO |
| Pino 20 | PTA4 — General-purpose I/O / NMI |
| Pino 21 | PTA5 — General-purpose I/O |
| Pino 22 | PTA6 — General-purpose I/O |
| Pino 23 | PTA7 — General-purpose I/O |
| Pino 24 | PTA8 — General-purpose I/O |
| Pino 25 | PTA9 — General-purpose I/O |
| Pino 26 | PTA10 — General-purpose I/O |
| Pino 27 | PTA11 — General-purpose I/O |
| Pino 28 | PTA12 — General-purpose I/O |
| Pino 29 | PTA13 — General-purpose I/O |
| Pino 30 | PTA14 — General-purpose I/O |
| Pino 31 | PTA15 — General-purpose I/O |
| Pino 32 | PTA16 — General-purpose I/O |
| Pino 33 | PTA17 — General-purpose I/O |
| Pino 34 | PTA18 — General-purpose I/O / EXTAL |
| Pino 35 | PTA19 — General-purpose I/O / XTAL |
| Pino 36 | VDD — Digital supply |
| Pino 37 | VSS — Ground |
| Pino 38 | PTB0 — ADC channel / general I/O |
| Pino 39 | PTB1 — ADC channel / general I/O |
| Pino 40 | PTB2 — ADC channel / general I/O |
| Pino 41 | PTB3 — ADC channel / general I/O |
| Pino 42 | PTB4 — General-purpose I/O |
| Pino 43 | PTB5 — General-purpose I/O |
| Pino 44 | PTB6 — General-purpose I/O |
| Pino 45 | PTB7 — General-purpose I/O |
| Pino 46 | PTB8 — General-purpose I/O |
| Pino 47 | PTB9 — General-purpose I/O |
| Pino 48 | PTB10 — General-purpose I/O |
| Pino 49 | PTB11 — General-purpose I/O |
| Pino 50 | PTB12 — General-purpose I/O |
| Pino 51 | PTB13 — General-purpose I/O |
| Pino 52 | PTB14 — General-purpose I/O |
| Pino 53 | PTB15 — General-purpose I/O |
| Pino 54 | PTB16 — General-purpose I/O / UART0 RX |
| Pino 55 | PTB17 — General-purpose I/O / UART0 TX |
| Pino 56 | PTB18 — CAN TX |
| Pino 57 | PTB19 — CAN RX |
| Pino 58 | PTC0 — General-purpose I/O |
| Pino 59 | PTC1 — General-purpose I/O |
| Pino 60 | PTC2 — General-purpose I/O |
| Pino 61 | PTC3 — General-purpose I/O |
| Pino 62 | PTC4 — General-purpose I/O |
| Pino 63 | PTC5 — General-purpose I/O |
| Pino 64 | PTC6 — General-purpose I/O |
| Pino 65 | PTC7 — General-purpose I/O |
| Pino 66 | PTC8 — General-purpose I/O |
| Pino 67 | PTC9 — General-purpose I/O |
| Pino 68 | PTC10 — General-purpose I/O |
| Pino 69 | PTC11 — General-purpose I/O |
| Pino 70 | PTC12 — General-purpose I/O |
| Pino 71 | PTC13 — General-purpose I/O |
| Pino 72 | PTC14 — General-purpose I/O |
| Pino 73 | PTC15 — General-purpose I/O |
| Pino 74 | PTC16 — General-purpose I/O |
| Pino 75 | PTC17 — General-purpose I/O |
| Pino 76 | VDD — Digital supply |
| Pino 77 | VSS — Ground |
| Pino 78 | PTD0 — General-purpose I/O |
| Pino 79 | PTD1 — General-purpose I/O |
| Pino 80 | PTD2 — General-purpose I/O |
| Pino 81 | PTD3 — General-purpose I/O |
| Pino 82 | PTD4 — General-purpose I/O |
| Pino 83 | PTD5 — General-purpose I/O |
| Pino 84 | PTD6 — General-purpose I/O |
| Pino 85 | PTD7 — General-purpose I/O |
| Pino 86 | PTD8 — General-purpose I/O |
| Pino 87 | PTD9 — General-purpose I/O |
| Pino 88 | PTD10 — General-purpose I/O |
| Pino 89 | PTD11 — General-purpose I/O |
| Pino 90 | PTD12 — General-purpose I/O |
| Pino 91 | PTD13 — General-purpose I/O |
| Pino 92 | PTD14 — General-purpose I/O |
| Pino 93 | PTD15 — General-purpose I/O |
| Pino 94 | PTD16 — General-purpose I/O |
| Pino 95 | PTD17 — General-purpose I/O |
| Pino 96 | PTD18 — General-purpose I/O |
| Pino 97 | PTD19 — General-purpose I/O |
| Pino 98 | PTD20 — General-purpose I/O |
| Pino 99 | PTD21 — General-purpose I/O |
| Pino 100 | PTD22 — General-purpose I/O |
| Pino 101 | PTD23 — General-purpose I/O |
| Pino 102 | PTD24 — General-purpose I/O |
| Pino 103 | PTD25 — General-purpose I/O |
| Pino 104 | PTD26 — General-purpose I/O |
| Pino 105 | PTD27 — General-purpose I/O |
| Pino 106 | PTD28 — General-purpose I/O |
| Pino 107 | PTD29 — General-purpose I/O |
| Pino 108 | PTD30 — General-purpose I/O |
| Pino 109 | PTD31 — General-purpose I/O |
| Pino 110 | PTE8 — General-purpose I/O |
| Pino 111 | PTE9 — General-purpose I/O |
| Pino 112 | PTE10 — General-purpose I/O |
| Pino 113 | PTE11 — General-purpose I/O |
| Pino 114 | PTE12 — General-purpose I/O |
| Pino 115 | PTE13 — General-purpose I/O |
| Pino 116 | PTE14 — General-purpose I/O |
| Pino 117 | PTE15 — General-purpose I/O |
| Pino 118 | PTE16 — General-purpose I/O |
| Pino 119 | PTE17 — General-purpose I/O |
| Pino 120 | PTE18 — General-purpose I/O |
| Pino 121 | PTE19 — General-purpose I/O |
| Pino 122 | PTE20 — General-purpose I/O |
| Pino 123 | PTE21 — General-purpose I/O |
| Pino 124 | PTE22 — General-purpose I/O |
| Pino 125 | PTE23 — General-purpose I/O |
| Pino 126 | PTE24 — General-purpose I/O |
| Pino 127 | PTE25 — General-purpose I/O |
| Pino 128 | PTE26 — General-purpose I/O |
| Pino 129 | PTE27 — General-purpose I/O |
| Pino 130 | PTE28 — General-purpose I/O |
| Pino 131 | PTE29 — General-purpose I/O |
| Pino 132 | PTE30 — General-purpose I/O |
| Pino 133 | PTE31 — General-purpose I/O |
| Pino 134 | VDD — Digital supply |
| Pino 135 | VSS — Ground |
| Pino 136 | RTC_XTAL32 — 32.768 kHz crystal input |
| Pino 137 | RTC_XTAL32B — 32.768 kHz crystal output |
| Pino 138 | VBAT — RTC battery supply |
| Pino 139 | RESET_b — Reset input (active low) |
| Pino 140 | TPM_CLKIN0 — Timer clock input |
| Pino 141 | ETH_RMII_MDC — Ethernet RMII management clock |
| Pino 142 | ETH_RMII_MDIO — Ethernet RMII management data |
| Pino 143 | ETH_RMII_CRS_DV — Ethernet RMII carrier sense / data valid |
| Pino 144 | ETH_RMII_RX_ER — Ethernet RMII receive error |
Aplicações típicas
MK60DN512ZVLQ10 é adequado para 6 aplicaçãos: Industrial Ethernet Gateway with IEEE 1588, USB-to-UART Bridge and Field Service Tool, Smart Energy Meter and Data Concentrator, Building Automation Controller, Human-Machine Interface Touch Panel, Point-of-Sale Terminal with Ethernet.
Industrial Ethernet Gateway with IEEE 1588
The MK60DN512ZVLQ10 is well-suited for industrial Ethernet gateways requiring IEEE 1588 precision time protocol support because it integrates a hardware 1588-capable 10/100 Ethernet MAC plus a 100MHz Cortex-M4 core for protocol processing. At 100MHz with 128KB SRAM the part can run lightweight TCP/IP stacks, process Modbus TCP, and manage VLAN tagging without external memory. The Ethernet DMA offloads packet handling from the core, freeing CPU cycles for application logic. Place a 25MHz oscillator near the ETH_RMII pins, isolate PHY clock domain with a series resistor, and use the integrated PTP timer for sub-microsecond timestamp accuracy across smart-grid and factory-automation deployments.
Recomendado
USB-to-UART Bridge and Field Service Tool
The MK60DN512ZVLQ10's integrated USB 2.0 Full-Speed with device, host, and OTG support enables field-service USB bridges that connect legacy RS-485 or RS-232 industrial equipment to modern USB hosts and tablets. The 100MHz Cortex-M4 delivers sufficient throughput for UART baud rates up to 3 Mbaud with hardware DMA on both USB and UART endpoints. Pair the MCU with a USBLC6-2SC6 ESD array on the USB data lines and a MAX3232 for RS-232 level translation. This combination is well-suited for portable diagnostic tools that enumerate as USB CDC devices on host PCs and tablets without external PHY chips.
Recomendado
Smart Energy Meter and Data Concentrator
The MK60DN512ZVLQ10 suits smart electricity, water, and gas meters that need to log consumption, drive a segment LCD, and forward data over Ethernet or PLC. Its integrated LCD controller drives 4x40 segment displays directly without external drivers, while the 16-bit ADC samples current and voltage channels for Class 0.2 metrology accuracy. The 128KB SRAM buffers time-stamped logs across network outages, and the 512KB flash stores calibration tables and DLMS/COSEM protocol stacks. Its -40C to +105C industrial temperature range supports outdoor metering cabinets, and its low-power VLLS mode drops consumption below 5uA for battery-backed installations.
Recomendado
Building Automation Controller
The MK60DN512ZVLQ10 fits building-automation controllers managing HVAC, lighting, and access-control subsystems on a single board. Its rich peripheral set integrates CAN for BACnet, UARTs for Modbus RTU devices, and Ethernet for BACnet/IP and MQTT cloud connectivity without external bridges. The 512KB flash accommodates full BACnet stacks plus custom automation logic, while the FTM timers generate PWM signals for valve and damper actuators. Pin-compatibility with the K60 family simplifies expansion card reuse across controller variants. Add TVS diodes on field wiring and isolated CAN transceivers for industrial surge immunity.
Recomendado
Human-Machine Interface Touch Panel
For HMI panels with monochrome LCD plus touch input, the MK60DN512ZVLQ10 combines LCD controller, ADC for resistive touch sensing, and Ethernet for cloud connectivity in a single chip. The integrated LCD controller supports up to 320 segment pins, ideal for dot-matrix industrial displays up to 320x240 monochrome. SPI drives an external capacitive touch controller over short flex cables. The 100MHz core renders custom icons at acceptable frame rates. Boot from internal flash for code-only systems, or use a serial flash for asset graphics while keeping firmware updates simple.
Recomendado
Point-of-Sale Terminal with Ethernet
The MK60DN512ZVLQ10's combination of Ethernet, USB host, and LCD controller enables compact point-of-sale terminals that handle barcode scanning, receipt printing, and encrypted transaction logging. The 512KB flash stores TLS libraries plus application logic, and the hardware AES accelerator encrypts cardholder data without burdening the CPU. The integrated USB host stack supports HID barcode scanners, USB receipt printers, and customer-facing displays. Run main code from internal flash and store audit trails to an SD card over SPI, with the Ethernet MAC handling real-time authorizations against backend payment networks.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MK60DN512ZVLQ10 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MK60DN512ZVLQ10R | MK60DN512VLQ10 | MK60DN512ZVLQ12 | MK60DN512ZVLL10 | MK40DN512ZVMD10 |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20) | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 100-LQFP - smaller | 144-LQFP - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz |
| Flash | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Ethernet MAC | 10/100 with 1588 | 10/100 with 1588 | 10/100 with 1588 | 10/100 with 1588 | 10/100 with 1588 | None - no Ethernet |
| USB | USB 2.0 FS Device/Host/OTG | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +125C | -40C to +105C | -40C to +105C |
| Pin Count | 144 | 144 | 144 | 144 | 100 | 144 |
| Lifecycle | NRND | NRND | NRND | Active | NRND | NRND |
Principais diferenciais
- Integrated IEEE 1588 hardware timestamping (vs MK40DN512ZVMD10)
- 128KB SRAM for industrial stacks (vs STM32F1 series equivalent)
- Industrial -40C to +105C temperature rating (vs MK60DN512ZVLQ12 equivalent)
- Cortex-M4 with FPU and DSP (vs Cortex-M3 alternative)
Notas de projeto
The 144-LQFP package at 100MHz dissipates up to ~300mW typical and ~700mW peak during sustained Ethernet packet processing. The package theta_JA is approximately 50C/W on a 4-layer JEDEC test board. For enclosed industrial cabinets above 60C ambient, attach a small thermal pad or copper pour on the top of the package to keep the junction below 105C rated limit, especially during ULPS or sustained USB host enumeration.
Place a 100nF decoupling capacitor within 3mm of each VDD pin and a single 10uF bulk capacitor near the VREGIN pin. The Ethernet RMII traces must be length-matched within 50 mils; route them on the top layer over a continuous ground plane and keep series termination resistors within 5mm of the MCU pins. USB DP/DM traces should be 45 ohms differential with no stubs and length-matched within 150 mils of each other.
Do not confuse MK60DN512ZVLQ10 (current production silicon) with MK60DN512VLQ10 (initial silicon) - both are pin-compatible but the Z-suffix is recommended for new designs. The 144-LQFP package has a center thermal pad that must be soldered to the ground plane for electrical and thermal performance; omit at your own risk. The PTP timestamp function requires a 50ppm or better crystal reference on EXTAL. JTAG pins PTA0-PTA3 are 5V-tolerant only when the MCU is not powered - never drive them above VDD+0.3V during operation.
Informações de conformidade
RoHS and REACH compliant per NXP product page. Not AEC-Q100 qualified - industrial grade only. Not recommended for new designs (NRND); minimum longevity commitments honored per NXP policy.
