TPS548B28 - 20A, 16V Synchronous Buck Converter | TI
部品番号: TPS548B28 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $6.15 | $6.15 |
| 10 | $5.53 | $55.30 |
| 100 | $4.78 | $478.00 |
| 500 | $4.12 | $2,060.00 |
| 1,000 | $3.72 | $3,720.00 |
TPS548B28 概要
A synchronous buck converter (also called a step-down switching regulator) is a DC-DC power management IC that uses integrated high-side and low-side MOSFETs plus an external inductor to convert a higher input voltage to a lower output voltage with high efficiency. Within the power-management hierarchy, the TPS548B28 sits at the point-of-load (POL) regulator level of server, storage, and computing power trees.
Key features include 4-V to 16-V input range up to 20 A without external bias (2.7-V to 16-V with external bias from 3.13 V to 3.6 V), integrated 7.7-mΩ high-side and 2.4-mΩ low-side MOSFETs supporting 20-A continuous output, Skip-mode or FCCM operation for light-load efficiency, and programmable soft start. Differential remote sense improves output accuracy at the load point in dense boards.
Technically, the integrated power stage minimizes external component count, making the part well-suited to space-constrained datacenter applications. Fast load-transient response, accurate load and line regulation, and hiccup-mode overcurrent protection improve system robustness; the internal 3-V LDO simplifies bias by allowing operation directly from the input rail.
Typical applications include server and storage point-of-load rails, networking line cards, and computing ASIC/FPGA/DSP power supplies requiring 20 A or less at 0.6-V to 5.5-V outputs.
Design tip: use the TPS548B28EVM-023 evaluation board as a layout reference, keep the SW loop compact, and note the device is not intended for paralleled outputs - use TPS53355 or LM27403 for parallel designs.
ドロップイン代替品: TPS548B28 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
TPS548B22RWER
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
TPS549B22RWER
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
TPS548B28 最大定格＆電気的特性
| トポロジー | Synchronous Buck Converter |
| Input Voltage Range (with external bias) | 2.7 V to 16 V |
| Input Voltage Range (no external bias) | 4 V to 16 V |
| External Bias Range | 3.13 V to 3.6 V |
| 出力電圧範囲 | 0.6 V to 5.5 V |
| 最大出力電流 | 20 A |
| 基準電圧 | 0.6 V, ±1% over full junction temperature range |
| High-Side MOSFET Rds(on) | 7.7 mOhm |
| Low-Side MOSFET Rds(on) | 2.4 mOhm |
| Light Load Mode | Skip-mode or FCCM selectable |
| 過電流保護 | Hiccup current limit |
| ソフトスタート | Programmable |
| Remote Sense | Differential |
| Internal LDO | 3 V internal LDO |
| パッケージ | 21-PowerVFQFN (RWW) |
| 実装タイプ | Surface Mount |
TPS548B28 21-powervfqfn (rww) ピン配置ガイド
TPS548B28 (21-powervfqfn (rww) パッケージ) のピン配置。 このパワーデバイスは、ゲート、ドレイン、ソース端子を備えています。非極性パッケージの場合、正確なピン1の向きとフットプリントの詳細については、メーカーのデータシートを参照してください。主な用途には、電源設計、モータ駆動、負荷スイッチングがあります。
詳細なピン配置データはありません: TPS548B28.
詳細は データシート をご参照ください。
主な用途
TPS548B28 の用途: 6 件s: Server Point-of-Load Power, Storage and SSD Systems, Networking and Telecom Line Cards, FPGA and DSP Core Power, Industrial Computing and Edge Systems, Optical Module and ASIC Accelerator Cards.
Server Point-of-Load Power
Server motherboards require tightly regulated low-voltage rails for ASICs, memory, and logic, often at 20 A or less. The TPS548B28 fits this role with its 20-A continuous rating, 0.6-V to 5.5-V adjustable output, and ±1% 0.6-V reference over the full junction temperature range. Its differential remote sense compensates for board IR drop so voltage is accurate at the load pin. With integrated 7.7-mOhm and 2.4-mOhm MOSFETs and a 3-V internal LDO, the external BOM shrinks, fitting the dense layouts typical of server POL design. Fast load-transient response handles step loads from bursty processors.
おすすめ
Storage and SSD Systems
Enterprise storage controllers and SSD backplanes need efficient, compact 12-V-to-low-voltage conversion for NAND, controllers, and PHY rails. The TPS548B28 operates from a 4-V to 16-V input without external bias, directly accepting 12-V rails, and delivers up to 20 A with integrated MOSFETs. Skip-mode operation maintains efficiency at light load when storage is idle, while FCCM can be chosen to avoid mode-transient jitter. Hiccup current limit protects against shorted loads, and programmable soft start enables controlled power-up of storage subsystem rails in compliance with typical server startup sequencing requirements.
おすすめ
Networking and Telecom Line Cards
Networking line cards distribute a 12-V or intermediate bus to many point-of-load regulators feeding ASICs, PHYs, and optical modules. The TPS548B28's 2.7-V to 16-V input range (with 3.13-V to 3.6-V external bias) covers both 12-V and intermediate-bus inputs. Accurate line and load regulation plus differential remote sense keep rails within tight windows despite card-level voltage drops. Its small footprint and few external components address the high POL density of switch line cards, and Skip-mode operation improves the light-load efficiency that dominates networking energy profiles under partial traffic.
おすすめ
FPGA and DSP Core Power
FPGA and DSP core rails often demand sub-1-V outputs at several amps with tight accuracy and fast transient response. The TPS548B28 regulates down to 0.6 V with a ±1% reference over the full junction temperature range, meeting core-voltage accuracy requirements, and its fast load-transient response handles sudden clock-domain load steps during device configuration and operation. The 20-A rating covers mid-size FPGA core loads. Designers should follow the TI EVM-023 layout for compact SW loops to minimize switching transients and ensure stable D-CAP control behavior with low-ESR ceramic output capacitors.
おすすめ
Industrial Computing and Edge Systems
Industrial PCs, edge gateways, and embedded controllers run from 12-V or 24-V-adjacent rails and need robust, protected POL conversion. The TPS548B28's hiccup current limit survives sustained short circuits on loads and recovers automatically, improving field reliability. The 4-V to 16-V no-bias input range accepts 12-V industrial rails directly using the internal 3-V LDO, reducing component count in compact enclosures. Its high efficiency from integrated 7.7-mOhm and 2.4-mOhm MOSFETs limits heat dissipation in sealed housings, and programmable soft start coordinates staged power-up of embedded processors and peripherals.
おすすめ
Optical Module and ASIC Accelerator Cards
Accelerator cards and optical modules use dense 12-V-to-0.8-V/1.8-V rails with strict height and area limits. The TPS548B28's integrated power stage and minimal external parts reduce solution height and footprint versus discrete designs, while the 20-A capability feeds ASIC or transceiver rails directly. FCCM operation avoids light-load frequency variation that could interact with sensitive analog circuitry on optical front ends, and Skip-mode is selectable for purely digital rails. Designers should place input decoupling close to the VIN pins and reference the TI EVM-023 for validated component selection and layout.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TPS548B28 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TPS548B22RWER | TPS549B22RWER | TPS53355 |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Output Current | 20 A | ~30 A | ~20-30 A (family variant) | 30 A |
| Input Voltage Range | 2.7 V to 16 V (4-16 V no bias) | 2.7 V to 16 V | 2.7 V to 16 V (family variant) | Split rail: 4.5-13.2 V power stage |
| Output Voltage Range | 0.6 V to 5.5 V | 0.6 V to 5.5 V (family) | 0.6 V to 5.5 V (family) | 0.75 V to 2.775 V |
主な差別化要因
- Differential remote sense for load-point accuracy （vs TPS548B22RWER)
- No external bias needed from 4-V input （vs TPS53355)
- Integrated MOSFET simplicity vs controller designs （vs LM27403)
設計ノート
Follow the TPS548B28EVM-023 evaluation board layout as the reference design. Keep the high-frequency SW input loop (VIN decoupling capacitors to PGND) as compact as possible to minimize switching-radiated EMI. Place the output inductor and output capacitors close to the SW and VOUT pins, and route the differential remote sense lines as a paired trace away from SW and bootstrap nodes to preserve the ±1% output accuracy at the load.
For 4-V to 16-V inputs, the internal 3-V LDO powers the device directly - no external bias required. For inputs below 4 V, supply an external bias of 3.13 V to 3.6 V. Verify total power dissipation with the integrated 7.7-mOhm high-side and 2.4-mOhm low-side MOSFETs at your load current and ambient temperature; use the exposed pad with a solid ground plane array of thermal vias to conduct heat.
Do not connect TPS548B28 units in parallel for higher current - TI E2E engineers recommend TPS53355 or LM27403 for paralleled-output solutions. Also note that the SW pin (pin 20) switches PWM into the inductor and does not directly carry the 20-A DC output; sizing conductors only at SW misunderstands the current path, which flows through the inductor to the output capacitors.
コンプライアンス情報
Compliance details not present in the verified web data; consult the TI product page environmental information for TPS548B28RWWR.
