집적 회로

하위 카테고리

📁 ADC/DAC 2520 제품 📁 증폭기 IC 800 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 314 제품 📁 DSP 963 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1603 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18756 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32865)

AS1533-T - 12-bit 300ksps SAR ADC | ams OSRAM | 16-TSSOP
AS1533-T

AS1533-T - 12-bit 300ksps SAR ADC | ams OSRAM | 16-TSSOP

The ams OSRAM AS1533-T is a 12-bit, 300 ksps successive-approximation-register (SAR) analog-to-digital converter with two or four input channels and a high-speed serial SPI/MICROWIRE/QSPI-compatible interface, supplied in a 16-pin TSSOP package (4.40 mm body width) on tape-and-reel. According to the manufacturer datasheet excerpt, the AS1532/AS1533 family is specifically designed for single-supply operation, combining low power consumption with superior AC characteristics that make the part suitable for battery-powered instrumentation and industrial data-acquisition front ends. What is a SAR ADC: A successive-approximation-register analog-to-digital converter is a sampling ADC architecture that uses a binary-search algorithm against an internal DAC to convert an analog input to a digital code in N clock cycles, where N is the resolution in bits. SAR ADCs sit in the data-converter IC category above general-purpose ADCs, alongside delta-sigma and pipeline ADCs, and within the broader power-management and signal-chain semiconductor hierarchy. They are preferred for multi-channel, low-latency acquisitions where DC accuracy and deterministic latency matter more than very high sampling rates. Key features of the AS1533-T include 12-bit resolution, a 300 ksps sampling rate, 2 or 4 analog input channels multiplexed to a single ADC core, low power consumption suitable for single 2.7V–5.25V supply rails, and a flexible serial interface. The TSSOP-16 footprint makes it compatible with standard surface-mount assembly flows, and the -T suffix indicates tape-and-reel packaging for high-volume manufacturing. Architecture-wise, the input track-and-hold and capacitive DAC deliver excellent dynamic performance at low power. Sampling at 300 ksps with 12-bit resolution allows the AS1533-T to capture fast analog transients in process-control and instrumentation loops while consuming modest supply current. The on-chip input multiplexer provides either 2 or 4 channels, allowing designers to optimize channel count against board area. Typical applications include portable and battery-powered instrumentation, industrial process control loops, sensor signal conditioning, and data acquisition systems where 12-bit dynamic range is sufficient. The device also finds use in medical monitoring equipment, motor control feedback, and front-end digitisation for control panels. When designing with the AS1533-T, allocate adequate decoupling on AVDD and DVDD, keep analog and digital grounds separated with a single-point tie, and respect the rated analog input common-mode range relative to the chosen reference. The serial interface allows easy connection to modern microcontrollers and DSPs that lack a parallel ADC port. This page synthesizes distributor pricing, drop-in compatible alternatives, and engineering design notes that go beyond the manufacturer datasheet excerpt, helping engineers evaluate second-source availability and PCB-level integration for the AS1533-T.

견적 요청 문의하기
AS1538-BTST - 12-Bit 8-Ch I2C ADC, 50ks/s, 16-TSSOP | ams OSRAM
AS1538-BTST

AS1538-BTST - 12-Bit 8-Ch I2C ADC, 50ks/s, 16-TSSOP | ams OSRAM

The ams OSRAM (formerly ams AG / austriamicrosystems) AS1538-BTST is a 12-bit, 8-channel successive-approximation-register (SAR) analog-to-digital converter with a serial I2C interface, offering 50 ks/s sampling rate per channel in a 16-pin TSSOP surface-mount package. It operates from a single analog supply of 2.7 V to 5.25 V and the same range on the digital supply, drawing low supply current suitable for battery-powered and portable data acquisition. An SAR ADC is a type of analog-to-digital converter that uses a binary-search successive-approximation algorithm against an internal precision DAC to determine the output code. SAR ADCs offer the best combination of low power, deterministic latency (one conversion = N clock cycles), and strong DC accuracy - they sit in the data-converter hierarchy alongside pipeline ADCs (high speed, high power) and sigma-delta ADCs (highest resolution, lowest bandwidth). The I2C interface enables connection to almost any microcontroller with only two wires, making the AS1538-BTST popular for adding analog sensing to low-pin-count MCUs. Key features of the AS1538-BTST include 8 single-ended analog input channels selected by an internal analog multiplexer, 12-bit resolution with no missing codes, integrated track-and-hold, and selectable unipolar/bipolar input ranges via reference configuration. The 2.7-5.25 V single-supply operation covers both 3.3 V and 5 V system rails, and the TSSOP-16 footprint keeps board area under 35 mm². The companion part AS1540-BTST is the 4-channel version of the same die family for designs that only need fewer inputs. Architecture-wise, the part uses a charge-redistribution SAR core with an internal reference input pin, allowing the user to supply a precision external reference for best DC accuracy or a low-cost reference for cost-sensitive designs. The I2C address is hardware-selectable via an address pin to allow multiple AS1538 devices on the same bus. This is a more efficient silicon use than discrete ADC + MUX designs because the multiplexer is integrated inside the same die, eliminating the need for a separate analog switch. Typical applications include industrial process monitoring (multi-sensor data logging), portable medical instrumentation (battery-powered multi-channel measurements), consumer sensor hubs (multi-knob/multi-thermist-or reading via I2C), and HVAC / building-automation sensor interfaces. The wide supply range and small package also suit handheld multimeters and remote IoT sensor nodes powered by coin cells or 3.3 V system rails. When designing with this part, ensure the analog and digital supplies are properly decoupled with 100 nF + 10 uF capacitors placed close to the AVDD and DVDD pins respectively, and that the reference pin is bypassed with a low-ESR 1-10 uF capacitor to preserve linearity at full-scale transitions. Power-on default state sets the input multiplexer to channel 0 and the I2C address to the value latched at the AD pin during the most recent reset. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in alternatives from the AS15xx and ADCAD/ADS series, and PCB-level design notes that are not consolidated in the manufacturer datasheet.

견적 요청 문의하기
AS1538-BTSU - 12-Bit 8-Ch 50kSPS I2C ADC | ams | TSSOP-16
AS1538-BTSU

AS1538-BTSU - 12-Bit 8-Ch 50kSPS I2C ADC | ams | TSSOP-16

The ams AS1538-BTSU is a single-supply, low-power, 12-bit data-acquisition analog-to-digital converter featuring a serial I2C interface and an 8-channel input multiplexer, supplied in a 16-pin TSSOP (Tape & Reel shipping suffix "U") package. According to the manufacturer datasheet, it integrates a successive-approximation ADC core with a sample-and-hold amplifier, internal asynchronous clock, and internal voltage reference, delivering up to 50 ksps throughput while operating from a single 2.7 V to 5.25 V analog supply. An analog-to-digital converter (ADC) is a mixed-signal data-acquisition component that converts real-world analog signals into discrete digital codes for processing by a microcontroller, DSP, or FPGA. The AS1538 belongs to the SAR (Successive Approximation Register) ADC family, a category well suited for multiplexed multi-channel low-power applications where deterministic latency and compact code size outweigh the highest sampling rates. SAR ADCs sit hierarchically below Nyquist-rate ADCs and above slower integrating ADCs in the data-converter taxonomy, and they are most commonly used in sensor multiplexing, instrumentation, and industrial monitoring front-ends. Key features of the AS1538-BTSU include eight single-ended input channels (software-selectable via the multiplexer), true 12-bit no-missing-code performance, an I2C-compatible 2-wire serial interface that simplifies MCU interconnection, a low quiescent supply current suitable for battery-powered designs, an internal reference (with external-reference option via full-scale adjustment), and an operating temperature range rated for industrial environments. Together, these features make the device attractive for space-constrained, multi-sensor systems. Internally, the architecture combines an input multiplexer, a sample-and-hold front-end, an internal asynchronous clock that removes the need for an external high-frequency master clock, a SAR conversion engine, and a precision internal reference. The combination of internal clocking and a digital serial interface reduces MCU pin count and PCB area while preserving deterministic per-channel conversion timing. Typical applications include multi-channel sensor monitoring (temperature, pressure, strain-gauge bridges), portable and battery-powered instrumentation, industrial process control front-ends, patient-monitoring and point-of-care medical devices, power-supply telemetry (rail voltage / current sensing), and consumer appliance control boards. The wide analog supply range (2.7 V to 5.25 V) supports both 3.3 V and 5 V system rails. When designing with this part, ensure that the I2C bus pull-ups are sized for the chosen clock rate and that the analog and digital grounds are tied to a single point to minimize digital-noise coupling into the analog inputs. Designers should also budget adequate acquisition time per channel and avoid channel switching during the conversion phase to prevent settling errors. This page synthesizes distributor pricing from DigiKey, Mouser, Octopart and Win Source, cross-references for drop-in compatible alternatives, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
AS1539-BTST - 8-Channel 10-Bit I2C SAR ADC | ams OSRAM
AS1539-BTST

AS1539-BTST - 8-Channel 10-Bit I2C SAR ADC | ams OSRAM

The ams OSRAM (formerly austriamicrosystems) AS1539-BTST is a single-supply, low-power, 10-bit successive-approximation-register (SAR) analog-to-digital converter with an 8-channel input multiplexer and a serial I2C interface, packaged in a 16-pin TSSOP. It samples up to 50 ksps and integrates an on-chip 2.5V reference plus an internal oscillator, reducing external component count for compact data-acquisition front ends. A SAR ADC is a successive-approximation-register analog-to-digital converter that uses a binary-search algorithm against a precision DAC to digitize an analog input in N clock cycles for N bits of resolution. SAR ADCs sit in the broader hierarchy of: ADC -> data converter -> signal chain IC -> mixed-signal semiconductor. Compared with delta-sigma ADCs, SAR parts offer deterministic latency and lower power at modest resolutions, making them well suited to multiplexed low-frequency sensor acquisition rather than high-precision measurement. Key features include 8 input channels with software-configurable unipolar input range, an internal +2.5V reference (with the option to overdrive with an external reference), single-supply operation from 2.7V to 5.5V, low supply current, an I2C-compatible 2-wire serial interface, and a TSSOP-16 footprint that fits space-constrained designs. The architecture uses a capacitive charge-redistribution DAC with an internal clock and sample-and-hold. The reference defaults OFF at power-up and can be software-enabled; if the internal or external reference is repeatedly toggled, adequate settling time must be inserted between conversion cycles to preserve linearity, as called out in the manufacturer datasheet. Typical applications include multi-channel sensor monitoring, battery-cell monitoring in portable equipment, industrial process controls, and consumer audio/system monitoring where 10-bit resolution is sufficient. Design tip: add a 100 nF decoupling capacitor close to the supply pin and ensure the I2C SCL/SDA lines are pulled up to VDD with appropriate resistors for the chosen bus speed. Settling time after reference switching must be respected for INL/DNL. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, with all data points last verified as of 2026-10-13.

견적 요청 문의하기
AS1541-BQFT - 10-Bit 4-Ch I2C SAR ADC, 50ksps, 16-TQFN | ams OSRAM
AS1541-BQFT

AS1541-BQFT - 10-Bit 4-Ch I2C SAR ADC, 50ksps, 16-TQFN | ams OSRAM

The ams OSRAM AS1541-BQFT is a 10-bit, single-supply, low-power successive-approximation-register (SAR) analog-to-digital converter with a 4-input analog multiplexer and an I2C-compatible serial interface, packaged in a 16-pin TQFN (4x4 mm) with an exposed thermal pad. The device supports up to 4 single-ended input channels, samples at 50 ksps through the SAR core, and operates from a single 2.7V to 5.25V analog supply while drawing a typical supply current of only 1.5 mA at full sampling rate. A SAR ADC (Successive Approximation Register Analog-to-Digital Converter) is a precision data-conversion architecture that uses a binary-search algorithm against an internal precision DAC and comparator to resolve one bit per clock cycle. SAR ADCs are prized for low-latency conversions (no pipeline delay), intrinsic accuracy on a single conversion, low power, and excellent behavior for multiplexed multi-channel data acquisition in industrial, instrumentation, and sensor-conditioning applications. Key features of the AS1541-BQFT include 10-bit resolution with no missing codes, an integrated 4-channel analog multiplexer, an I2C-compatible 2-wire serial interface supporting Standard-Mode (100 kHz) and Fast-Mode (400 kHz) operation, an on-chip track-and-hold, a 2.5V internal reference (with external reference option), and software-configurable unipolar input ranges. The 16-TQFN-EP package exposes a thermal pad that must be soldered to a grounded copper pour to meet the datasheet thermal specification. The architecture combines a charge-redistribution DAC, a high-performance comparator, and a SAR control logic block. The I2C address is hardware-selectable through an AS pin, allowing up to two AS1541 devices to coexist on the same bus. Power-down modes reduce supply current to microampere levels between conversions for battery-friendly duty-cycled acquisition. Typical applications include multi-channel sensor monitoring (temperature, pressure, strain gauge bridges), portable/battery-powered instrumentation, factory automation front-ends, HVAC controllers, programmable logic controller (PLC) analog input modules, and consumer device user-interface controls such as potentiometer or thermistor readout. The 4-channel multiplexer minimizes external analog switch count in multi-sensor systems. When designing with the AS1541-BQFT, decouple AVDD and DVDD with 100 nF ceramic capacitors placed within 5 mm of the supply pins, keep analog and digital ground planes joined at a single point near the exposed pad, and drive the I2C lines with pull-up resistors sized for the chosen bus speed and total capacitance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet to help engineers evaluate the AS1541-BQFT for multi-channel precision data acquisition designs.

견적 요청 문의하기
AS1543-BQFT - 12-bit 1Msps 8/4-ch SAR ADC | ams OSRAM
AS1543-BQFT

AS1543-BQFT - 12-bit 1Msps 8/4-ch SAR ADC | ams OSRAM

The ams OSRAM AS1543-BQFT is a 12-bit, 1 Msps, low-power, 8/4-channel successive-approximation-register (SAR) analog-to-digital converter housed in a 20-pin TQFN (4x4 mm) package with exposed thermal pad. It operates from a single 2.7 V to 5.25 V supply, supports both single-ended and differential inputs, and provides a flexible serial host interface compatible with SPI, QSPI, MICROWIRE and many DSP serial ports. An SAR ADC is a type of data converter that resolves each conversion in a single clock cycle per bit using a switched-capacitor DAC and a comparator, achieving a deterministic latency and excellent dynamic performance for multiplexed-channel data-acquisition systems. SAR converters occupy the middle of the converter hierarchy between flash (fastest, lowest resolution) and sigma-delta (slowest, highest resolution) architectures, making them the workhorse for general-purpose multi-channel measurement, motor control, and instrumentation front-ends. Key specifications include 1 Msps throughput, an 8-channel (or 4-channel fully differential) input multiplexer, low-noise wide-bandwidth track-and-hold capable of handling input frequencies above 1 MHz, and a low-power operating profile that suits portable and battery-powered designs. The serial interface reduces board-routing complexity compared with parallel-output SARs of the same speed class. Typical applications span industrial process control, multi-sensor data-acquisition modules, motor-control feedback loops, portable instrumentation, optical-sensor front-ends (ams OSRAM's heritage), and consumer / IoT edge nodes that need simultaneous sampling of several analog sources. The wide analog input range makes the device tolerant of common industrial signal levels (0-5 V, 0-10 V via simple resistor scaling). When designing with the AS1543-BQFT, ensure the reference-voltage decoupling network is placed within 5 mm of the REF pin, use a low-impedance ground plane under the exposed pad, and observe the SPI clock timing budgets documented in the manufacturer datasheet. A 2.7-5.25 V supply allows direct connection to a 3.3 V or 5 V MCU rail without level shifters. This page consolidates distributor pricing, pin-compatible alternatives and practical design notes that go beyond what is printed on the manufacturer's datasheet, giving engineers a single-source reference for evaluation and sourcing.

견적 요청 문의하기
AS1544-BQFT - 12-Bit 1MSPS 4-Ch SAR ADC | ams OSRAM
AS1544-BQFT

AS1544-BQFT - 12-Bit 1MSPS 4-Ch SAR ADC | ams OSRAM

The ams OSRAM AS1544-BQFT is a 12-bit, 1 MSPS, low-power, 4-channel (2 differential) successive-approximation analog-to-digital converter (SAR ADC) housed in a 20-pin TQFN (4x4) package with exposed thermal pad. Operating from a single 2.7 V to 5.25 V supply, the device delivers high throughput with low power consumption, making it well suited for battery-powered and multi-channel data-acquisition systems. A successive-approximation register (SAR) ADC is a type of data converter that performs a binary search across an internal capacitive DAC to resolve the input voltage one bit at a time per clock cycle. SAR ADCs sit within the broader data-converter IC family (SAR -> ADC -> data converter -> mixed-signal IC) and are favored for applications requiring deterministic latency, single-shot accuracy, and excellent dynamic performance without the complexity of pipeline or delta-sigma architectures. Key specifications of the AS1544-BQFT include a 1 MSPS sampling rate, 4 single-ended or 2 fully differential analog inputs, an integrated channel sequencer for automatic sequential conversions, and an SPI-/QSPI-/MICROWIRE-/DSP-compatible serial interface. A wide 2.7 V to 5.25 V analog supply range allows direct interfacing to 3.3 V and 5 V system rails. The 20-pin TQFN-EP (4x4 mm) package provides a small footprint suitable for space-constrained PCB designs while the exposed pad enhances thermal dissipation. The device architecture uses a sample-and-hold front end feeding a precision capacitive DAC and comparator, with conversion timing controlled by the external serial clock (SCLK) which also acts as the master conversion clock. The single-supply operation and channel sequencer eliminate the need for an external multiplexer in multi-channel monitoring applications, reducing both BOM count and software complexity. Typical applications include portable instrumentation, multi-channel sensor monitoring, industrial process control, automotive sensor interface, and battery management systems. The integrated sequencer makes the part especially attractive for cyclic channel-scanning designs where deterministic channel-to-channel timing is required. When designing with the AS1544-BQFT, ensure the SCLK frequency is held within the converter's specified range to maintain 1 MSPS throughput, place decoupling capacitors close to AVDD and DVDD pins, and connect the exposed pad to a clean analog ground plane for optimal thermal and noise performance. This page synthesizes distributor pricing, same-family cross references, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
AS1545 - Dual 12-bit 1MSPS 6-ch SAR ADC | ams OSRAM
AS1545

AS1545 - Dual 12-bit 1MSPS 6-ch SAR ADC | ams OSRAM

The ams OSRAM AS1545 is a dual, 12-bit, 6-channel, 1 MSPS, successive-approximation-register (SAR) analog-to-digital converter in a 32-pin TQFN (5x5 mm) package with exposed thermal pad. According to the ams OSRAM datasheet, the device operates from a single +2.7 V to +5.25 V supply, integrates two synchronized SAR ADCs each preceded by a 6-channel input multiplexer and a high-bandwidth track-and-hold amplifier, and offers a serial data interface for compact microcontroller or DSP readback. What is a SAR ADC? A successive-approximation-register analog-to-digital converter is a precision data-conversion architecture that performs one bit at a time using a comparator, a digital-to-analog converter and a binary-search register, achieving 12 to 18 effective bits with no pipeline latency. SAR ADCs sit at the midpoint of the converter hierarchy between flash ADCs (fastest, lowest resolution) and sigma-delta ADCs (highest resolution, lowest bandwidth), and they remain the dominant choice for multiplexed multi-channel data acquisition at 100 kSPS to several MSPS where both speed and DC accuracy matter. Key specifications include 12-bit resolution, 1 MSPS sampling rate per channel, six single-ended analog inputs per ADC (twelve total), single-supply +2.7 V to +5.25 V operation, -40 C to +85 C operating temperature range, and a serial digital interface. The two integrated 6:1 multiplexers double the effective channel count without an external analog switch, while the on-chip track-and-hold supports full-scale step inputs at 1 MSPS without distortion. The architecture uses two simultaneous sampling SAR cores sharing an internal clock generator, a precision bandgap reference buffer, and a unified serial data port. This dual-core topology lets designers acquire two independent signal groups (such as voltage and current on a polyphase power stage) at the same instant, avoiding the time skew that two cascaded ADCs would introduce. Typical applications include industrial process control and PLC analog front ends, multi-phase power-supply voltage and current monitoring, motor-control feedback sensing, medical instrumentation signal acquisition, and portable data loggers or battery-powered sensor hubs. The wide 2.7 V to 5.25 V supply range lets a single part run directly from a 3.3 V MCU rail or a 5 V analog rail. When designing with this part, route the analog and digital grounds as separate islands tied at a single star point under the exposed pad, and place the supply bypass network (10 uF bulk plus 100 nF X7R) within 3 mm of the AVDD and DVDD pins. The exposed thermal pad must be soldered to a continuous ground plane to keep junction temperature within the -40 C to +85 C operating envelope. This page synthesizes ams OSRAM datasheet specifications, distributor pricing, drop-in alternatives in the same 32-TQFN footprint, and practical PCB layout notes not collated in the manufacturer's datasheet alone.

견적 요청 문의하기
AS4C256M16D3L-12BCN - 4Gbit DDR3L SDRAM 800MHz | Alliance Memory
AS4C256M16D3L-12BCN

AS4C256M16D3L-12BCN - 4Gbit DDR3L SDRAM 800MHz | Alliance Memory

The AS4C256M16D3L-12BCN is a 4Gbit DDR3L SDRAM organized as 256M x 16, operating at 1.35V with a maximum clock frequency of 800MHz (data rate 1600Mbps). It is housed in a 96-ball FBGA package (9x13mm) and is RoHS compliant and halogen-free. This memory IC is designed for high-performance computing, networking, and industrial applications requiring low power consumption and high bandwidth. DDR3L (Double Data Rate 3 Low Voltage) is a type of synchronous dynamic random-access memory (SDRAM) that operates at a reduced supply voltage of 1.35V, compared to standard DDR3's 1.5V. This lower voltage reduces power consumption by up to 20% while maintaining similar performance, making it ideal for power-sensitive applications such as laptops, embedded systems, and networking equipment. DDR3L is part of the DDR SDRAM family, which includes DDR, DDR2, DDR3, and DDR4, each offering increased speed and lower power. Key features include a parallel interface with a 16-bit data bus, 800MHz clock speed, and a CAS latency of 20ns. The device supports JEDEC clock jitter specifications, ensuring reliable operation in high-speed systems. The 96-ball FBGA package provides excellent thermal and electrical performance, with a compact footprint suitable for space-constrained designs. The AS4C256M16D3L-12BCN utilizes advanced CMOS technology to achieve high density and low power consumption. It supports various burst lengths and programmable CAS latency, allowing flexibility in system design. The device also includes on-die termination (ODT) and dynamic ODT for improved signal integrity, reducing the need for external termination resistors. Typical applications include networking equipment (routers, switches), industrial automation, embedded computing, and consumer electronics such as set-top boxes and smart TVs. Its low voltage and high bandwidth make it suitable for DDR3L-based systems requiring 4Gbit density. When designing with this memory, ensure proper decoupling capacitors near the power pins and follow the layout guidelines in the datasheet to minimize signal integrity issues. The device requires a 1.35V supply and a separate VDDQ, which should be regulated accurately.

견적 요청 문의하기
AS4C256M16D3L-12BCNTR - 4Gbit DDR3L SDRAM 96-FBGA | Alliance Memory
AS4C256M16D3L-12BCNTR

AS4C256M16D3L-12BCNTR - 4Gbit DDR3L SDRAM 96-FBGA | Alliance Memory

The AS4C256M16D3L-12BCNTR is a 4Gbit DDR3L SDRAM organized as 256M x 16, operating at 1.35V with a maximum clock frequency of 800 MHz (data rate 1600 Mbps/pin). It is housed in a 96-ball FBGA package (9x13mm) and is designed for commercial temperature range (0°C to +95°C). This memory IC is a drop-in replacement for standard DDR3L components, offering high-speed double-data-rate transfer for applications requiring large, low-power memory. DDR3L (Double Data Rate 3 Low Voltage) SDRAM is a type of synchronous dynamic random-access memory that operates at a reduced supply voltage of 1.35V, compared to standard DDR3's 1.5V, reducing power consumption by up to 20% while maintaining similar performance. It is part of the DDR3 memory family, which uses double-data-rate signaling to transfer data on both edges of the clock, achieving high bandwidth. DDR3L is widely used in mobile devices, embedded systems, and networking equipment where power efficiency is critical. Key features include a parallel interface with 16-bit data bus, 800 MHz clock speed, 20 ns access time, and support for 1.283V to 1.45V supply voltage. The device is RoHS compliant and lead-free, meeting environmental standards. The 96-FBGA package with 9x13mm dimensions provides a compact footprint suitable for space-constrained PCB designs. Technically, the AS4C256M16D3L-12BCNTR utilizes advanced DRAM process technology to achieve high density and low power. It supports burst lengths of 8 and 4, on-die termination (ODT), and programmable CAS latency. The device includes auto-refresh and self-refresh modes for power saving. The 1.35V operation reduces I/O power, making it ideal for battery-powered applications. Typical applications include servers, workstations, networking equipment, and embedded systems requiring high-capacity, low-power memory. The 4Gbit density and 16-bit organization make it suitable for memory expansion in industrial PCs, routers, and test equipment. When designing with this component, ensure proper decoupling capacitors near the power pins and follow the layout guidelines in the datasheet to minimize signal integrity issues. The device requires a stable 1.35V supply and reference voltage (VREF) for reliable operation.

견적 요청 문의하기
AS4C256M16D3LC-12BIN - 4Gb DDR3L SDRAM 96-FBGA | Alliance Memory
AS4C256M16D3LC-12BIN

AS4C256M16D3LC-12BIN - 4Gb DDR3L SDRAM 96-FBGA | Alliance Memory

The AS4C256M16D3LC-12BIN is a 4Gb DDR3L SDRAM organized as 256M x 16 bits, operating at 1.35V with a data rate of 800 MHz (DDR3L-1600). It comes in a 96-ball FBGA package (7.5x13.5mm) and is designed for industrial temperature range (-40°C to +95°C). This memory IC is a drop-in replacement for standard DDR3L modules, offering high-speed data transfer and low power consumption. DDR3L SDRAM is a type of dynamic random-access memory that operates at a lower voltage (1.35V) compared to standard DDR3 (1.5V), reducing power consumption by about 20% while maintaining similar performance. It is part of the DDR3 family, which uses double data rate architecture to transfer data on both edges of the clock, achieving high bandwidth. DDR3L is commonly used in embedded systems, networking equipment, and industrial applications where power efficiency and reliability are critical. Key features include an 8-bank architecture, programmable CAS latency, burst lengths of 8 and 4, on-die termination (ODT), and a 20ns row cycle time. The device supports auto-refresh and self-refresh modes, and includes a temperature sensor for thermal management. The 96-ball FBGA package provides a compact footprint suitable for space-constrained designs. Technically, the AS4C256M16D3LC-12BIN uses a high-speed CMOS process and features a 16-bit data bus, achieving data rates up to 1600 Mbps per pin. It operates from a single 1.35V supply, with an I/O voltage of 1.35V, and is compatible with JEDEC DDR3L standards. The device includes programmable read and write latencies, and supports DLL (Delay-Locked Loop) for precise timing. Typical applications include embedded computing, industrial PCs, networking routers, and automotive infotainment systems. Its low voltage and industrial temperature range make it ideal for harsh environments. The device is also suitable for high-reliability systems requiring long-term availability. When designing with this memory, ensure proper decoupling capacitors near the power pins and follow the layout guidelines in the datasheet to minimize signal integrity issues. The device requires a stable 1.35V supply and careful termination of the data and address lines.

견적 요청 문의하기
AS4C256M8D3LB-12BIN - 2Gbit DDR3L SDRAM 78-FBGA | Alliance Memory
AS4C256M8D3LB-12BIN

AS4C256M8D3LB-12BIN - 2Gbit DDR3L SDRAM 78-FBGA | Alliance Memory

The AS4C256M8D3LB-12BIN is a 2Gbit DDR3L SDRAM organized as 256M x 8 bits, operating at a clock frequency of 800 MHz (DDR3L-1600) with a CAS latency of 11 and a tRCD/tRP of 13.75 ns. It is housed in a 78-ball FBGA package (8x10.5 mm) and operates from a 1.35V supply, with a voltage range of 1.283V to 1.45V. This device is designed for low-power applications, offering a significant reduction in power consumption compared to standard DDR3. DDR3L (Double Data Rate 3 Low Voltage) is a type of synchronous dynamic random-access memory (SDRAM) that operates at a lower voltage (1.35V) than standard DDR3 (1.5V), reducing power consumption by up to 20% while maintaining similar performance. It is part of the memory hierarchy in computing systems, serving as the main system memory in laptops, embedded systems, and networking equipment. DDR3L is backward compatible with DDR3 slots in many cases, making it a popular choice for upgrades and new designs. Key features include a parallel interface with a data rate of 1600 MT/s, a burst length of 8, and on-die termination (ODT) for improved signal integrity. The device supports auto-refresh and self-refresh modes, with a typical refresh period of 7.8 us at 85°C. It also features programmable CAS latency, additive latency, and write latency, allowing flexibility in system timing. The 78-FBGA package is optimized for space-constrained designs, with a compact footprint of 8x10.5 mm. Technically, the AS4C256M8D3LB-12BIN uses a 2Gbit DRAM cell array with a 8n-prefetch architecture, enabling high-speed data transfer. The device includes a DLL (Delay-Locked Loop) for precise clock alignment and supports dynamic ODT for improved signal quality. It is fabricated using a advanced CMOS process, ensuring low leakage and high reliability. The operating temperature range is 0°C to +95°C (case temperature), making it suitable for commercial and industrial applications. Typical applications include embedded systems, networking equipment (routers, switches), industrial computing, and consumer electronics such as set-top boxes and smart TVs. Its low voltage and high density make it ideal for battery-powered devices and energy-efficient designs. The device is also used in automotive infotainment systems where reliability and temperature range are critical. When designing with this memory, ensure proper decoupling capacitors are placed near the VDD and VDDQ pins to minimize noise. The VREFCA and VREFDQ pins should be bypassed with 0.1uF capacitors. Also, follow the JEDEC DDR3L layout guidelines for signal integrity, especially for high-speed signals. The device supports a 1.35V supply, so ensure the power supply is stable and within the specified range.

견적 요청 문의하기
AS4C512M16D4-75BIN - 8Gbit DDR4 SDRAM 512Mx16 | Alliance Memory
AS4C512M16D4-75BIN

AS4C512M16D4-75BIN - 8Gbit DDR4 SDRAM 512Mx16 | Alliance Memory

The AS4C512M16D4-75BIN is an 8Gbit DDR4 SDRAM organized as 512M x 16, operating at a clock frequency of 1.333 GHz (DDR4-2666) with an access time of 18 ns and a write cycle time of 15 ns. It is supplied in a 96-ball FBGA package (7.5x13 mm) and operates from a 1.2V power supply, making it suitable for high-bandwidth memory applications in industrial temperature ranges (-40°C to +95°C). DDR4 SDRAM (Double Data Rate 4 Synchronous Dynamic Random-Access Memory) is a type of volatile memory that transfers data on both edges of the clock signal, doubling the data rate compared to single-data-rate SDRAM. It is the fourth generation of DDR memory, offering higher speed and lower power consumption than its predecessors. DDR4 operates at 1.2V, reducing power by 20% compared to DDR3L, and supports higher densities, making it ideal for servers, networking, and embedded systems. Key features include auto self-refresh, auto precharge, asynchronous reset, output enable, CRC (Cyclic Redundancy Check) function, data mask, write leveling, dynamic on-chip termination (ODT), and ZQ calibration. These features enhance signal integrity and reliability in high-speed systems. The device supports industrial temperature range, ensuring operation in harsh environments. The AS4C512M16D4-75BIN uses a 20nm-class process technology, enabling high density with low power. It features a pseudo-open-drain (POD) interface, which is standard for DDR4, and supports burst lengths of 8 and 4 with burst chop. The memory is organized in 16 banks (4 bank groups), providing high concurrency and reduced latency. Typical applications include networking equipment (routers, switches), industrial computing, embedded systems, and high-performance computing. Its high density and speed make it suitable for buffering and data-intensive tasks. The industrial temperature rating allows use in outdoor and automotive (non-AEC) environments. When designing with this device, ensure proper decoupling with 0.1uF and 1uF capacitors near the power pins, and follow the layout guidelines for DDR4 routing to maintain signal integrity. The ZQ pin requires a 240-ohm resistor to ground for calibration.

견적 요청 문의하기
AS4C512M16D4A-62BCN - 8Gb DDR4 SDRAM 512Mx16 | Alliance Memory
AS4C512M16D4A-62BCN

AS4C512M16D4A-62BCN - 8Gb DDR4 SDRAM 512Mx16 | Alliance Memory

The AS4C512M16D4A-62BCN is an 8Gb DDR4 SDRAM organized as 512M x 16 bits, operating at 1.2V with a data rate of 1600MHz (3200Mbps). It is housed in a 96-ball FBGA package (7.5x13mm) and is JEDEC standard compliant. This memory IC is designed for high-performance computing, networking, and industrial applications requiring high density and fast data transfer. DDR4 SDRAM (Double Data Rate 4 Synchronous Dynamic Random-Access Memory) is a type of volatile memory that transfers data on both edges of the clock, doubling the data rate compared to DDR3. It operates at lower voltages (1.2V) for improved power efficiency and features higher density and faster speeds. DDR4 is a key component in modern computing systems, servers, and embedded devices, providing the main memory for processors and other digital systems. Key features include a fast clock rate of 1600MHz, 18ns CAS latency, and a 96-ball FBGA package with a 7.5x13mm footprint. The device supports commercial temperature range (0°C to 95°C) and is available in tray packaging. It is fully JEDEC compliant, ensuring compatibility with standard DDR4 memory controllers. Technically, the AS4C512M16D4A-62BCN uses a 16n prefetch architecture, enabling high-speed data transfer. It includes on-die termination (ODT) and programmable read/write latencies for signal integrity. The device also supports auto-refresh and self-refresh modes for power saving. The 1.2V supply reduces power consumption by 20% compared to DDR3L, making it suitable for power-sensitive applications. Typical applications include servers, networking equipment, industrial PCs, and high-end embedded systems. Its high density and speed make it ideal for data-intensive tasks such as real-time analytics, network processing, and industrial automation. The 512M x 16 organization is particularly suited for systems requiring wide data buses. When designing with this component, ensure proper decoupling capacitors near the power pins and follow the layout guidelines in the datasheet to maintain signal integrity at 1600MHz. The device requires a 1.2V supply and a separate VPP voltage of 2.5V for wordline boost.

견적 요청 문의하기
AS4C512M16D4A-62BCNTR - 8Gb DDR4 SDRAM 512Mx16 | Alliance Memory
AS4C512M16D4A-62BCNTR

AS4C512M16D4A-62BCNTR - 8Gb DDR4 SDRAM 512Mx16 | Alliance Memory

The AS4C512M16D4A-62BCNTR is an 8Gb DDR4 SDRAM organized as 512M x 16 bits, operating at 1.2V with a fast clock rate of 1600MHz (DDR4-3200). It is housed in a 96-ball FBGA package (7.5x13mm) and is JEDEC standard compliant, ensuring compatibility with standard DDR4 memory controllers. This device is designed for high-bandwidth, low-power applications, making it ideal for networking, computing, and industrial systems. DDR4 SDRAM (Double Data Rate 4 Synchronous Dynamic Random-Access Memory) is a type of volatile memory that transfers data on both edges of the clock signal, doubling the data rate compared to DDR3. It operates at a lower voltage (1.2V) than DDR3 (1.5V), reducing power consumption. DDR4 is the industry standard for modern computing, offering higher density and speed while maintaining backward compatibility with JEDEC standards. Key features include a 1.2V power supply, 1600MHz clock rate (PC4-3200), 18ns CAS latency, and a 96-ball FBGA package. The device supports on-die termination (ODT), programmable read/write latencies, and auto-refresh and self-refresh modes. It is available in commercial temperature range (0°C to +95°C) and is RoHS compliant. The AS4C512M16D4A-62BCNTR uses a 20nm-class process technology, offering high density and low power. It features a 16n prefetch architecture, which improves bandwidth efficiency. The device includes a temperature sensor for thermal management and supports DLL (Delay-Locked Loop) for precise timing. Typical applications include servers, networking equipment, industrial PCs, and embedded systems requiring high-capacity, high-speed memory. Its 512M x 16 organization is ideal for systems with a 16-bit data bus, such as high-end routers and switches. When designing with this device, ensure proper decoupling capacitors near the power pins and follow the layout guidelines in the datasheet to minimize signal integrity issues. The device requires a 1.2V supply and a separate VPP (2.5V) for wordline boost, which must be generated correctly.

견적 요청 문의하기
AS4C512M16D4A-62BIN - 8Gb DDR4 SDRAM 512Mx16 | Alliance Memory
AS4C512M16D4A-62BIN

AS4C512M16D4A-62BIN - 8Gb DDR4 SDRAM 512Mx16 | Alliance Memory

The AS4C512M16D4A-62BIN is an 8Gb DDR4 SDRAM organized as 512M x 16 bits, operating at a clock rate of 1600MHz (DDR4-3200) with a data rate of 3.2Gbps per pin. It is housed in a 96-ball FBGA package (7.5x13mm) and operates from a 1.2V supply, compliant with JEDEC standards. This industrial temperature grade device supports a temperature range of -40°C to +95°C, making it suitable for demanding environments. DDR4 SDRAM is a type of synchronous dynamic random-access memory that achieves higher speed and lower power consumption than previous generations. It uses a double data rate interface, transferring data on both edges of the clock, and operates at a lower voltage (1.2V) compared to DDR3 (1.5V). DDR4 is the standard memory technology for modern computing systems, servers, and embedded applications, offering improved bandwidth and efficiency. Key features include a fast clock rate of 1600MHz, burst lengths of 8 and 4 (with burst chop), programmable CAS latency, and on-die termination (ODT) for signal integrity. The device supports auto-refresh and self-refresh modes, and includes a temperature sensor for thermal management. The 96-ball FBGA package provides a compact footprint with excellent thermal and electrical performance. The AS4C512M16D4A-62BIN utilizes advanced DRAM process technology, achieving high density with low power consumption. It features a pseudo-open-drain (POD) interface, which reduces I/O power and improves signal integrity. The device includes a mode register for configuration, and supports various test modes for system validation. Typical applications include networking equipment, industrial computing, automotive infotainment, and embedded systems requiring high-density, high-bandwidth memory. Its industrial temperature range and reliability make it ideal for harsh environments. When designing with this device, ensure proper decoupling and signal integrity practices, including controlled impedance traces and termination. The device requires a stable 1.2V supply and a separate VPP supply of 2.5V for wordline boost.

견적 요청 문의하기
AS4C512M16D4B-62BCNTR - 8Gb DDR4 SDRAM 512Mx16 | Alliance Memory
AS4C512M16D4B-62BCNTR

AS4C512M16D4B-62BCNTR - 8Gb DDR4 SDRAM 512Mx16 | Alliance Memory

The AS4C512M16D4B-62BCNTR is a high-performance 8Gb DDR4 SDRAM organized as 512M x 16 bits, manufactured by Alliance Memory, Inc. It operates at a clock speed of 1600 MHz (DDR4-3200) with a data rate of 3200 MT/s, and is housed in a 96-ball FBGA package (7.5x13 mm). The device uses a 1.2V power supply, with a voltage range of 1.14V to 1.26V, and supports commercial temperature range from 0°C to 95°C. This memory IC is designed for high-bandwidth applications requiring fast data transfer and low power consumption. DDR4 SDRAM (Double Data Rate 4 Synchronous Dynamic Random-Access Memory) is a type of volatile memory that transfers data on both rising and falling edges of the clock signal, effectively doubling the data rate. It is the fourth generation of DDR memory, succeeding DDR3, and offers higher speed, lower voltage, and increased density. DDR4 is a key component in modern computing systems, including servers, desktops, laptops, and embedded systems, where it serves as the main system memory or as a buffer for high-speed data processing. Key features of the AS4C512M16D4B-62BCNTR include a fast clock rate of 1600 MHz, a CAS latency of 19 ns, and a parallel interface. It is JEDEC standard compliant, ensuring compatibility with industry-standard DDR4 memory controllers. The device supports on-die termination (ODT) and posted CAS, which improve signal integrity and reduce bus turnaround time. The 96-ball FBGA package provides a compact footprint suitable for space-constrained designs. The architecture of the AS4C512M16D4B-62BCNTR utilizes an 8n prefetch design, which allows the internal DRAM core to operate at a lower frequency while the I/O interface transfers data at high speed. This architecture reduces power consumption and improves thermal performance. The device also includes auto-refresh and self-refresh modes to maintain data integrity with minimal power draw. Typical applications for this DDR4 SDRAM include servers, networking equipment, industrial computing, and high-performance embedded systems. Its high density and speed make it ideal for applications requiring large memory capacity and fast data throughput, such as data centers, cloud computing, and advanced driver-assistance systems (ADAS). When designing with this component, ensure proper decoupling capacitors are placed near the power pins to minimize noise. The device requires a stable 1.2V supply and careful PCB layout to maintain signal integrity at high speeds. Refer to the datasheet for detailed timing and layout guidelines.

견적 요청 문의하기
AS4C8M16SA-6BAN - 128Mb SDRAM 166MHz 3.3V 54-TFBGA | Alliance Memory
AS4C8M16SA-6BAN

AS4C8M16SA-6BAN - 128Mb SDRAM 166MHz 3.3V 54-TFBGA | Alliance Memory

The Alliance Memory AS4C8M16SA-6BAN is a 128Mbit synchronous DRAM (SDRAM) memory IC organized as 8M x 16 bits, operating at 166 MHz with a 5 ns clock cycle time from a 3.3V supply, housed in a 54-ball TFBGA (8x8 mm) package rated for automotive temperature ranges. Synchronous DRAM is a category of volatile DRAM memory that synchronizes all address, control, and data inputs to a single clock edge, unlike asynchronous DRAM which responds to control signal transitions independently. Within the memory hierarchy, SDRAM sits above asynchronous DRAM in performance and below DDR generations; it remains the workhorse memory class for embedded processors, networking equipment, and industrial systems that require burst-mode bandwidth without DDR controller complexity. Key features of the AS4C8M16SA-6BAN include the 8M x 16 organization with four internal banks, a 166 MHz clock rate (CL3 programmable cas latency), auto refresh and self refresh modes per the Alliance Semiconductor/Alliance Memory datasheet, LVTTL-compatible 3.3V interface, and AEC-Q100-capable automotive temperature support. The 54-ball TFBGA (8x8 mm) package offers a compact surface-mount footprint with improved signal integrity compared to 54-pin TSOP II, reducing lead inductance for high-speed bus operation. The device implements industry-standard SDRAM command architecture including bank activate, read, write, precharge, mode register set, and refresh commands, enabling straightforward integration with SDRAM controllers in FPGAs and microprocessors. The automotive temperature rating extends operation beyond the commercial 0C to +70C range, making the part suitable for harsh-environment designs. Typical applications include automotive infotainment and telematics buffers, industrial HMI and PLC data buffers, FPGA-based instrumentation memory, medical equipment frame buffers, and communications equipment line-card buffering. Design consideration: SDRAM requires continuous refresh - budget for the auto-refresh command interval in your controller scheduling, and terminate/series-damp clock and data lines to preserve 166 MHz signal integrity on multi-drop buses. This page synthesizes distributor pricing, availability, drop-in replacement options, and practical design guidance not consolidated in the manufacturer datasheet.

견적 요청 문의하기
AS89020 - 4-Ch 12-bit Current-Input ADC | ams OSRAM
AS89020

AS89020 - 4-Ch 12-bit Current-Input ADC | ams OSRAM

The ams OSRAM AS89020 is a 4-channel, 12-bit successive approximation register (SAR) analog-to-digital converter with current-mode inputs, packaged in a 20-pin SSOP. Each channel is independently addressable and programmable in 17 sensitivity levels, with a finest sensitivity of approximately 2.8 pA/LSB, making the device well suited to direct readout of photodiodes (e.g. RGB or XYZ color sensors) and other current-output transducers without external transimpedance stages. An ADC of this current-input type belongs to the data-converter family of mixed-signal integrated circuits. The SAR architecture performs a binary search through an internal capacitive DAC each conversion cycle, settling in one clock rather than integrating over many cycles, which preserves input bandwidth and rejects 50 Hz/60 Hz line-frequency noise only with additional filtering. In the broader system taxonomy, the AS89020 sits inside signal-chain ICs -> data converters -> analog-to-digital converters -> precision SAR ADCs -> photo-sensor front-ends. Key features highlighted by the manufacturer datasheet include on-chip temperature compensation, measurement support for both positive and negative input currents (bidirectional), and a fast SPI-compatible serial digital interface for read-out and channel programming. The 17 programmable gain/sensitivity levels per channel allow the application firmware to re-scale the full-scale range as light levels change, which simplifies dynamic-range management in color-sensing applications. The analog front-end integrates low-noise current integrators and a temperature-compensated bandgap reference, removing the need for an external reference IC and reducing BOM count. Because each channel includes its own integrator, the four photodiodes can be read independently and at different integration times, which is useful when matching a red-, green-, blue-, and clear-channel response of a colorimeter. Typical end applications are ambient-light and color-sensing modules, XYZ tristimulus colorimeters, RGB LED feedback loops, industrial photo-interpreters, and handheld colorimeters. The on-chip temperature compensation also allows the part to be used in closed-loop luminous-intensity control where photodiode drift over temperature must be cancelled in firmware. When designing with this part, choose the per-channel integration time and sensitivity setting to keep the photodiode output current well within the programmed full-scale range; over-range currents can saturate the integrator and clip the conversion. Decouple VDD with a low-ESR 100 nF ceramic capacitor placed within a few millimetres of the supply pin to preserve converter linearity. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a faster path from part selection to prototype build.

견적 요청 문의하기
ASI4UE-E-G1-ST - AS-Interface v3.0 Universal Slave IC | Renesas
ASI4UE-E-G1-ST

ASI4UE-E-G1-ST - AS-Interface v3.0 Universal Slave IC | Renesas

The Renesas ASI4UE-E-G1-ST is an AS-Interface (Actuator Sensor Interface) Specification v3.0 compliant universal AS-i slave IC housed in a 28-pin SOIC wide-body package. Designed as a fourth-generation CMOS AS-i transceiver for master and slave nodes, the device transports both 24 V power and digital data simultaneously over a single two-wire unshielded cable. Its 28-SOIC form factor, integrated EEPROM for node parameters, and an on-chip analog front-end make it the principal silicon solution for industrial AS-i slave modules. An AS-Interface (AS-i) IC is a specialized transceiver integrated circuit that implements the physical and data-link layers of the AS-i fieldbus. The bus was created to economically connect binary sensors and actuators over a single unshielded twisted pair, eliminating the analog I/O modules and analog wiring harnesses traditionally required in factory automation. AS-i transceivers sit between a microcontroller and the bus, handling Manchester-coded transmission, slave AC modulation/demodulation, and node addressing that complements the ASI4U IC. The ASI4UE-E-G1-ST extends this role with full AS-i v3.0 compliance and A²SI pin compatibility for migration from older 3rd-party AS-i slave ASICs. Key features include AS-Interface Complete Specification v3.0 compliance, integrated non-volatile EEPROM for storage of slave parameters and node address, an AS-i safety option for short response times on safety-related events, A²SI function and pin compatibility, programmable by stationary or handheld programming devices, and operation over the industrial -40C to +85C temperature range. The wide-body 28-SOIC package facilitates robust through-hole-style PCB mounting for the high-voltage industrial environment associated with the 24 V AS-i bus rail. Architecturally, the ASI4UE-E-G1-ST combines a high-voltage bus transceiver front-end, an analog modulator/demodulator block implementing the AS-i AC current modulation scheme, a Manchester encoder/decoder, an integrated oscillator, and a serial peripheral interface (SPI) for connection to an external microcontroller. Configuration data, the AS-i slave address, and ID codes are stored in the internal EEPROM, which is programmable in-circuit by a handheld or stationary programmer. The special AS-i safety option provides deterministic short response times for safety-at-work applications. Typical applications include industrial binary sensor modules, industrial valve manifolds, indicator lights and stack lights, AS-i safety modules, AS-i gateway modules, AS-i slave I/O blocks, and AS-i repeater systems. When designing with the ASI4UE-E-G1-ST, place 100 nF decoupling close to VCC and follow the reference PCB layout in the datasheet to meet EMI/EMC compliance. The integrated oscillator minimizes external components and the EEPROM eliminates external parameter memory. This page synthesizes distributor pricing, drop-in alternatives, and practical AS-i bus design notes not found in the manufacturer datasheet.

견적 요청 문의하기
ASI4UE-G1-SR - AS-Interface v3.0 Universal AS-i IC | Renesas
ASI4UE-G1-SR

ASI4UE-G1-SR - AS-Interface v3.0 Universal AS-i IC | Renesas

The Renesas ASI4UE-G1-SR is a next-generation CMOS integrated circuit designed for AS-Interface (AS-i) networks, fully compliant with the AS-Interface Complete Specification v3.0. Housed in a surface-mount SOIC-28 package, the ASI4UE-G1-SR functions as part of a master or slave node and provides the physical interface, power-supply management, and protocol handling for the AS-i field bus. It transports both 24 VDC power and digital data simultaneously over a single two-wire unshielded cable, supporting up to 31 standard slaves per master with cycle times down to 5 ms. An AS-i (Actuator Sensor Interface) IC is a specialized mixed-signal controller used in industrial automation to replace parallel wiring between sensors/actuators and a PLC. The bus category hierarchy is: AS-i IC -> industrial fieldbus transceiver -> sensor/actuator interface -> industrial communication IC -> semiconductor. Compared with conventional point-to-point wiring, AS-i reduces cabling cost and weight, supports automatic slave addressing, and enables diagnostic data collection from each node. The ASI4UE-G1-SR's on-chip EEPROM stores all slave configuration parameters, allowing rapid programming via stationary or handheld programming devices. Key features include an integrated differential physical layer for the AS-i bus, an embedded Manchester-coded protocol engine, an internal DC-DC converter that derives a regulated logic supply from the bus voltage, four configurable digital I/O lines with input-monitoring capability, and a dedicated safety option that guarantees short response times for safety-related events. The IC supports up to 4 standard slaves per AS-i master and can be cascaded for larger networks. Architecturally, the ASI4UE-G1-SR combines a high-voltage bus transceiver, a precision current source, an 8-bit microcontroller-compatible interface, and the safety-state machine in one CMOS die. This level of integration eliminates the need for an external ASIC or microcontroller in simple slave implementations, lowering BOM cost and PCB area. The device operates over the -25 °C to +85 °C industrial temperature range. Typical applications include binary sensor/actuator modules in factory automation, AS-i safety I/O blocks, conveyor-system edge nodes, packaging machinery, and AS-i stack-light modules. The device is function- and pin-compatible with the legacy A²SI IC family, allowing drop-in migration of existing AS-i slave designs. When designing with the ASI4UE-G1-SR, observe the recommended PCB layout guidelines from the datasheet: keep the bus traces short and symmetric, place the bus-decoupling capacitor within 5 mm of the IC, and provide adequate creepage/clearance for the 24 V industrial environment. Always validate safety-related designs against the AS-i Safety Specification. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet to accelerate AS-i slave and master integration.

견적 요청 문의하기
ASM1083 - PCIe x1 to 32-bit PCI Bridge | ASMedia Technology Inc.
ASM1083

ASM1083 - PCIe x1 to 32-bit PCI Bridge | ASMedia Technology Inc.

The ASMedia Technology Inc. ASM1083 is an x1 PCI Express to 32-bit PCI forward bridge controller that enables designers to connect legacy parallel PCI bus devices to modern PCI Express serial interfaces. Housed in an LQFP-128 package, the ASM1083 is fully compliant with the PCI-SIG PCI Express-to-PCI Bridge Specification 1.0, making it the industry-standard solution for adding legacy PCI card support to PCIe-based motherboard designs. A PCI Express-to-PCI bridge is a type of interface bridge IC in the broader family of bus interface integrated circuits. Its role in the system hierarchy is to translate protocol transactions between a high-speed serial root complex (PCIe) and the older shared-parallel-bus PCI (Conventional PCI, 32-bit/33 MHz) domain, preserving investment in legacy add-in cards such as audio cards, RAID controllers, industrial I/O, and capture cards. Key features of the ASM1083 include its x1 PCI Express downstream port operating at 2.5 GT/s, support for 32-bit conventional PCI bus operation at up to 66 MHz [DATA_NEEDED: exact PCI frequency modes], integrated PHY and MAC for the PCIe interface, and compliance with the PCI-SIG PCI Express-to-PCI Bridge Specification 1.0. Single-chip integration eliminates the need for external glue logic, reducing bill-of-materials cost and board area. Architecturally, the device implements a forward bridge: transactions originating on the PCIe side are translated and forwarded to the conventional PCI bus, and responses are returned upstream. The bridge handles configuration space mapping, bus numbering, and transaction ordering per PCI-SIG rules. [DATA_NEEDED: power supply voltages, quiescent current, and detailed operating characteristics from the full datasheet] Typical applications include desktop motherboards that retain one legacy PCI slot, PCIe-to-PCI riser and adapter cards, industrial backplanes and SBCs that must accept legacy PCI I/O modules, and retro/legacy audio expansion cards where the ASM1083 sits between the PCIe edge connector and a legacy PCI audio codec. When designing with the ASM1083, verify clocking requirements and power-management behavior; community reports note compatibility issues when aggressive PCIe power-saving (ASPM) states are enabled on some adapters, so disabling ASPM or validating L-state handling is advisable for audio and real-time capture cards. This page synthesizes distributor sourcing data, the PCI-SIG bridge compliance statement from the manufacturer product page, and practical design notes not found in the datasheet summary.

견적 요청 문의하기
ASM1166 - PCIe Gen3 x2 to 6-Port SATA Controller | ASMedia
ASM1166

ASM1166 - PCIe Gen3 x2 to 6-Port SATA Controller | ASMedia

The ASMedia ASM1166 is a SATA host controller (AHCI) IC with an upstream PCIe Gen3 x2 interface and six downstream SATA Gen3 (6 Gbps) ports, housed in a QFN-88 10x10 mm surface-mount package. According to the ASMedia product page, it is a low-latency, low-cost, low-power AHCI controller supporting cascaded port multipliers. A SATA host controller is a type of storage interface IC, or disk controller, within the broader family of PCIe bridge and interface controllers used in the storage I/O subsystem of computers and servers. It translates PCI Express transactions into SATA AHCI command traffic, allowing a system with limited native SATA ports to attach many more drives. The AHCI (Advanced Host Controller Interface) standard means the device is recognized natively by modern operating systems without vendor-specific drivers, which is a major advantage for NAS and home-lab builders. Key features include six independent SATA 6 Gbps ports from a single PCIe Gen3 x2 upstream link (approximately 2 GB/s aggregate bandwidth, shared across ports), support for cascaded port multipliers to expand beyond six physical drives, low power consumption suited to always-on storage systems, and native AHCI 1.3.1-class operation in Linux, Windows, and BSD kernels. Architecturally, the ASM1166 integrates a PCIe Gen3 PHY and MAC on the upstream side, a packet arbitration engine, and six SATA 3.x PHY/MAC channels downstream. Because the x2 upstream link is the bottleneck (~1.97 GB/s raw), per-port throughput is highest when workloads are spread across disks rather than concentrated on one drive, and sequential multi-drive reads saturate the upstream link. Typical applications include NAS (Network Attached Storage) builds on Unraid, TrueNAS, and OpenMediaVault, server and high-capacity storage platforms, surveillance and video-recording systems, and adding drive bays to mini-PCs via M.2-to-SATA adapter cards. Design-wise, route the six SATA differential pairs with controlled impedance (100 ohm differential), keep pairs length-matched, and provide a solid ground reference; the exposed pad must be soldered to ground for thermal and electrical integrity. Firmware is typically flash-resident on an attached SPI ROM, so include the flash on the BOM. This page synthesizes distributor availability, community-verified comparisons against JMB585 and LSI HBAs, and practical design notes not found in the brief manufacturer datasheet listing.

견적 요청 문의하기
ASM2364 - 20Gbps USB to PCIe 3.0 x4 NVMe Bridge | ASMedia
ASM2364

ASM2364 - 20Gbps USB to PCIe 3.0 x4 NVMe Bridge | ASMedia

The ASMedia ASM2364 is a USB 3.2 Gen 2x2 to PCI Express Gen 3 x4 NVMe bridge controller with up to 20Gbps USB bandwidth, four-lane PCIe connectivity, and a QFN-88 10x10 mm package. It integrates ASMedia USB 3.2 Gen 2x2 and PCI Express Gen 3 PHYs and translates NVMe storage traffic between a USB Type-C host connection and an internal M.2 solid-state drive. The controller targets external SSDs, onboard SSDs, PCs, laptops, servers, docking stations, and embedded systems. A USB-to-PCIe NVMe bridge is a semiconductor controller that lets an NVMe drive use a USB interface instead of a conventional internal PCIe port. In the system hierarchy, ASM2364 is an interface controller, storage interface bridge, USB controller, PCIe endpoint, and NVM Express device controller. Its Gen 2x2 USB interface provides two 10Gbps lanes, while its PCIe Gen 3 x4 side supplies four PCI Express lanes for a high-bandwidth storage path. The verified manufacturer information identifies USB 3.2 Gen 2x2, PCI Express Gen 3 x4, one USB device port, and integrated USB and PCIe PHYs as the central features. ASMedia describes ASM2364 as its second-generation PCI Express-to-USB 3.2 device controller. Advanced power saving is supported through USB and PCI Express link power management together with chip power management, making the device suitable for systems where energy use and thermal performance matter. The controller supports NVM Express Base Specification Revision 1.3c, PCI Express Base Specification Revision 3.1a, and USB 3.2 Specification Revision 1.0 according to the provided datasheet result. Its high-speed lanes are intended to maximize transfer throughput while retaining compatibility with NVMe M.2 SSDs used in external and embedded storage products. Actual sustained transfer speed still depends on the SSD, host controller, cable, enclosure, firmware, and thermal conditions. Typical implementations place ASM2364 between a USB Type-C receptacle and an M.2 NVMe socket. The same architecture can support external SSD enclosures, internal PC or laptop storage, server storage adapters, docking stations, and embedded systems. The QFN-88 package is compact relative to the interface bandwidth, but high-speed differential routing, power integrity, grounding, thermal design, and connector signal integrity remain critical. Designers should validate the complete USB Type-C cable and host path because 20Gbps operation requires a USB 3.2 Gen 2x2 host connection. PCB layout must follow the manufacturer reference guidance, preserve impedance-controlled differential pairs, provide continuous return paths, and place decoupling and clock circuitry according to the datasheet. Firmware and NVMe compatibility should also be verified before production release. This page consolidates the verified manufacturer description, package information, storage use cases, comparison caveats, and practical integration guidance. It separates documented facts from unavailable details, avoiding unsupported assumptions about pin assignments, electrical ratings, lifecycle status, or unverified drop-in replacements.

견적 요청 문의하기