집적 회로

하위 카테고리

📁 ADC/DAC 3,100+ 제품 📁 증폭기 IC 1,900+ 제품 📁 오디오 코덱 18 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 660+ 제품 📁 Comparator ICs 1 제품 📁 DSP 1,100+ 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 7,300+ 제품 📁 인터페이스 IC 3,300+ 제품 📁 LED 드라이버 1 제품 📁 로직 IC 460+ 제품 📁 메모리 IC 870+ 제품 📁 마이크로컨트롤러 20,000+ 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 14 제품

제품 (39,000+)

EP1C4F400C8N - 4K LE Cyclone FPGA 301 I/O 400-FBGA | Intel/Altera
EP1C4F400C8N

EP1C4F400C8N - 4K LE Cyclone FPGA 301 I/O 400-FBGA | Intel/Altera

The Intel/Altera EP1C4F400C8N is a member of the Cyclone family of low-cost Field-Programmable Gate Arrays (FPGAs) built on a 130 nm SRAM process, delivering 4,000 logic elements, 78,336 RAM bits, and 301 user I/O pins in a 400-ball FineLine BGA package. The 'C8' speed grade denotes a commercial 8 ns pin-to-pin logic delay, and the 'N' suffix indicates lead-free, RoHS-compliant terminations. According to the Altera Cyclone Family datasheet, this device integrates up to 17 M4K memory blocks, two PLLs, and a dedicated double-data-rate (DDR) interface that supports external SDR/DDR/DDR2 memory at up to 266 Mbps data rate. A Field-Programmable Gate Array (FPGA) is a semiconductor device whose digital logic, interconnect, and I/O behavior are defined by user-supplied configuration data rather than by the mask set of a fixed-function ASIC. Within the broader programmable-logic hierarchy, FPGAs sit above CPLDs in density and below full-custom ASICs in per-unit cost, and they are commonly classified as SRAM-volatile devices because the configuration is reloaded from external flash on every power-up. Cyclone-series FPGAs in particular occupy the low-cost, high-volume tier and target glue-logic, bridging, and parallel DSP tasks where discrete processors or ASICs are uneconomical. Key features include 4,000 logic elements arranged in 400 LABs (logic array blocks), 78,336 bits of embedded RAM organized into M4K blocks, two enhanced PLLs with eight output taps each, support for LVDS, SSTL-2, and SSTL-3 I/O standards, and a MultiTrack interconnect that shortens compile time at the cost of slightly higher propagation delay compared with the Stratix family. The 400-pin FBGA package exposes 301 user I/O pins and supports both 1.5 V and 1.8 V core operation with I/O banks that tolerate 3.3 V mixed-voltage signaling. The architectural block diagram separates the device into four quadrants, each containing 100 LABs, four M4K RAM blocks, and a local row/column interconnect. A central global clock network drives the two PLLs and the dedicated DDR circuitry, while the periphery holds eight I/O banks - four on the top edge and four on the bottom - allowing fine-grained placement of differential pairs and memory interfaces. Configuration is loaded through active serial (AS), passive serial (PS), or JTAG modes from a low-cost EPCS serial configuration device. Typical applications include industrial motor control boards, video bridging and image-sensor pre-processing, low-cost software-defined radio front-ends, factory-automation backplanes, and educational FPGA development kits where the Cyclone's combination of generous logic, DDR support, and under-$30 price point make it a default choice. When designing with this device, allocate at least 20% of LABs and one M4K block for the JTAG and configuration logic so that in-system programming works on first prototypes. Keep the eight I/O bank supplies well decoupled with 0.1 µF X7R ceramics placed within 5 mm of each bank, and route DDR traces first with matched length and 50 Ω single-ended impedance to take advantage of the dedicated DDR interface without re-spinning the PCB.

견적 요청 문의하기
EP1C4F400C8NAA - Cyclone FPGA, 4000 LEs, 301 I/O, 400-BGA | Intel
EP1C4F400C8NAA

EP1C4F400C8NAA - Cyclone FPGA, 4000 LEs, 301 I/O, 400-BGA | Intel

The Intel EP1C4F400C8NAA is a member of the original Cyclone FPGA family, offering 4,000 logic elements, 78,336 RAM bits, and 301 user I/Os in a 400-ball FineLine BGA package with industrial-grade -8 speed grade. Built on a 1.5 V core, 0.13 µm SRAM-based architecture, it integrates embedded multipliers, PLLs, and dual-purpose configuration I/O pins, making it suitable for cost-sensitive, high-volume digital designs. A Field Programmable Gate Array (FPGA) is a reprogrammable semiconductor device that contains an array of configurable logic blocks (CLBs), programmable interconnects, and I/O cells. FPGAs sit at the same tier of complexity as programmable logic devices, ASICs, and CPLDs, and are commonly classified within the broader family of programmable logic. Cyclone sits in Intel's (formerly Altera) low-cost FPGA portfolio, positioned below Stratix and Cyclone II/III for power- and price-optimized applications. Key specifications include 4,000 logic elements, 78,336 bits of embedded RAM, 17 M4K memory blocks, two PLLs, up to 301 maximum user I/O pins, and 400-ball FineLine BGA packaging. The device supports configuration via passive serial, active serial, and JTAG modes, and operates over an industrial 0 °C to +85 °C junction temperature range. The Cyclone architecture combines 4-input look-up tables (LUTs) with embedded multiplier blocks capable of 18 × 18 bit signed multiplication. Its row/column interconnect and direct-drive I/O buffers deliver deterministic timing without complex place-and-route iterations. The 1.5 V core VCCINT is supported by an on-chip voltage reference and external decoupling network. Typical applications include industrial motor control, low-cost video bridging, consumer electronics glue logic, and legacy communication interface conversion. Its balance of logic capacity and I/O count makes it a strong fit for protocols requiring many pins such as PCI, SDR/DDR memory controllers, and parallel bus aggregation. When designing with this device, ensure signal integrity on the 400-ball FBGA by following Intel's PCB layout guidelines for FineLine BGA packages, including matched-length clocks and proper decoupling on every VCCINT/VCCIO pair. Use the Quartus II (legacy) or modern Quartus Prime design software for synthesis, place-and-route, and bitstream generation.

견적 요청 문의하기
EP1C4F400C8NAB - Cyclone FPGA 4000 Cells 301 I/O 400-FBGA | Intel
EP1C4F400C8NAB

EP1C4F400C8NAB - Cyclone FPGA 4000 Cells 301 I/O 400-FBGA | Intel

The Intel (Altera) EP1C4F400C8NAB is a member of the first-generation Cyclone FPGA family fabricated on a 130 nm CMOS process, integrating 4000 logic elements, 78,336 RAM bits, and 301 user I/O pins in a 400-ball FineLine BGA package. It operates from a 1.5 V core supply with multiple I/O bank voltages and is rated for the commercial 0C to +85C junction temperature range. The device is offered in speed grade 8 with the NAB suffix denoting a Pb-free, RoHS-compliant industrial-grade package. A Field Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnects, and I/O cells that allow the hardware function to be redefined after manufacture. FPGAs sit at the top of the programmable logic hierarchy (FPGA -> programmable logic -> digital IC -> semiconductor) and are widely used for parallel datapath processing, custom interface bridging, glue logic, and ASIC prototyping where time-to-market outweighs per-unit cost. The Cyclone family was Altera's first SRAM-based, low-cost FPGA line, targeting ASIC replacement in cost-sensitive applications. Key features of the EP1C4F400C8NAB include 4000 logic elements, 17 M4K RAM blocks (78,336 RAM bits total), up to 301 user I/O pins across 8 I/O banks, embedded multipliers (typically 2 x 18 x 18 per M4K block region) for DSP-style arithmetic, and a Phase-Locked Loop (PLL) for clock management. The 400-ball FBGA package supports high I/O density on a small board footprint, while the 1.5 V core reduces dynamic power relative to older 2.5 V/3.3 V FPGA generations. Architecturally, the Cyclone I fabric uses 4-input lookup tables (LUTs) feeding registers, with routing switch matrices connecting rows and columns. Logic is grouped into Logic Array Blocks (LABs), and I/O is organized into banks with independent VCCIO pins supporting LVTTL, LVCMOS, PCI, SSTL, and LVDS signaling. The configuration bitstream is loaded from an external serial or parallel flash via the dedicated configuration pins, with the device remaining in user mode after the JTAG-driven configuration completes. Typical applications include digital video processing pipelines, industrial control and factory automation glue logic, telecommunications line-card interface bridging, low-cost ASIC prototyping, motor control and encoder interfaces, and legacy Parallel RapidIO/Custom bus bridges. The combination of moderate logic density, embedded multipliers, and plentiful user I/O suits designs that previously would have required a small ASIC. When designing with the EP1C4F400C8NAB, note that first-generation Cyclone devices are no longer recommended for new designs; verify with Intel's latest product discontinuation notices before committing. Plan decoupling around each VCCINT and VCCIO pin, route configuration signals (nCONFIG, nSTATUS, CONF_DONE, DCLK, DATA0) away from switching clocks, and use the Altera/Quartus II design toolchain for synthesis and place-and-route. This page synthesizes distributor pricing, drop-in same-package alternatives from the Cyclone family, and practical design notes that complement the manufacturer datasheet.

견적 요청 문의하기
EP1C4F400I7 - Cyclone FPGA 4000 LE, 301 I/O | Altera
EP1C4F400I7

EP1C4F400I7 - Cyclone FPGA 4000 LE, 301 I/O | Altera

The Altera EP1C4F400I7 is a Cyclone family FPGA supplied in a 400-ball FineLine BGA package, integrating 4,000 logic elements, 78,336 RAM bits, and up to 301 user I/Os. Distributor listings for this part report a 130 nm, 1.5 V-core CMOS device with approximately 320 MHz-class performance; the I7 suffix identifies the industrial-temperature speed-grade -7 ordering option. An FPGA is a field-programmable gate array, an integrated circuit whose logic fabric can be reconfigured after manufacturing. Unlike a fixed-function ASIC, an FPGA uses lookup tables, registers, embedded memory, and programmable routing to implement custom digital logic. In the programmable-logic hierarchy, an FPGA sits above CPLDs in density and is commonly used when a design needs thousands of gates, multiple independent state machines, or wide parallel I/O. The Cyclone CPLD-to-FPGA comparison is therefore relevant: EP1C4F400I7 provides substantially more capacity than a MAX/CPLD-class part. Verified specifications from the provided web data include 4,000 logic cells, 400 LABs, 301 user I/O pins, 78,336 RAM bits, 400-ball FBGA packaging, 1.5 V core supply, and 130 nm CMOS technology. The XAIPART summary is based on Partstack, DigiKey, Mouser, and FindIC listing data. The 21 x 21 mm, 1.0 mm-pitch fine-pitch BGA provides enough pins for memory buses, parallel ADCs, and peripheral interfaces while remaining a single-chip programmable logic solution. The Cyclone architecture organizes logic into logic array blocks with embedded memory and routing resources. EP1C4F400I7 contains 400 such LAB contexts, with 4,000 logic elements, and the 301 I/O count allows dense board-level connections. As an industrial I7 part, this FPGA is intended for environments where the commercial-temperature C-suffix variants are not acceptable. Because the Cyclone I family is now mature, designers should confirm exact memory configuration and I/O standards from the Cyclone datasheet before layout. Typical applications include industrial motor control, video/imaging front-end processing, protocol bridging, legacy glue-logic consolidation, test-and-measurement instrumentation, and edge IoT data concentration. The combination of moderate logic density, 78,336 RAM bits, and high I/O count permits custom state machines and parallel communication interfaces that would otherwise require multiple CPLDs. The industrial grade also suits equipment installed in factory cabinets or outdoor enclosures where ambient temperature can be elevated. When designing with EP1C4F400I7, pay particular attention to 1.5 V core decoupling and BGA fan-out. Because this part belongs to an older family, verify exact ball assignments using the Cyclone FPGA family datasheet or Intel/Altera pin files. Within the EP1C4F400 package, speed-grade and finish variants are package-compatible, but timing and temperature limits must be re-evaluated when substituting between -6, -7, and -8 speed grades. This page synthesizes information from distributor listings, an alternatives cross-reference search, and practical board-design guidance. It supplements the manufacturer datasheet by showing which EP1C4F400 order-code variants are drop-in candidates and how to make an informed temperature, speed, and lead-finish selection.

견적 요청 문의하기
EP1C4F400I7N - Cyclone FPGA, 4K LEs, 400-FBGA, Industrial | Intel/Altera
EP1C4F400I7N

EP1C4F400I7N - Cyclone FPGA, 4K LEs, 400-FBGA, Industrial | Intel/Altera

The Intel (formerly Altera) EP1C4F400I7N is a Cyclone® family Field-Programmable Gate Array (FPGA) with 4,000 logic elements housed in a 400-ball FineLine BGA package (21 x 21 mm, 1.0 mm pitch). It operates at a core voltage of 1.5V, supports I/O voltages from 1.5V to 3.3V, and delivers a maximum internal operating frequency of 320 MHz. The industrial-grade -I7 speed grade is rated for the -40C to +85C ambient range. An FPGA (Field-Programmable Gate Array) is a class of programmable logic device that allows designers to implement arbitrary digital logic functions after PCB fabrication. Within the broader taxonomy, the Cyclone series sits at the low-cost, low-power end of Intel's FPGA portfolio, bridging the gap between CPLDs and high-density Stratix devices. FPGAs are widely used in glue logic, custom interfacing, parallel DSP pipelines, and hardware prototyping, where time-to-market and in-system reprogrammability outweigh per-unit cost. The Cyclone architecture combines 4-input look-up tables (LUTs), embedded M4K RAM blocks (totaling approximately 78 Kbits), and a rich I/O mix including LVDS, PCI, and DDR support. Two PLLs provide flexible clock management, and dedicated hardware multipliers accelerate DSP operations. The device uses SRAM-based configuration, requiring an external configuration device such as the EPCS1 or EPCS4 serial flash for standalone boot. With 301 user I/Os and a 400-ball FBGA package, the EP1C4F400I7N is intended for I/O-rich designs such as industrial control boards, custom video or image processing front-ends, prototyping platforms, and educational development kits. The 1.0 mm ball pitch makes the package approachable for multilayer PCB fabrication while still enabling high pin-count integration. When designing, pay close attention to configuration scheme (AS, PS, JTAG), decoupling (100 nF + bulk tantalum near each VCC/GND pair), and thermal management: although typical quiescent power is modest, dynamic power scales with toggle rate. Always validate timing with Quartus II TimeQuest under worst-case process, voltage, and temperature corners. This page synthesizes distributor pricing, drop-in alternatives drawn from the same Cyclone family, and practical design notes not assembled in any single manufacturer document.

견적 요청 문의하기
EP1C6F25617 - Cyclone FPGA 5,980 LEs 256-FBGA | Altera
EP1C6F25617

EP1C6F25617 - Cyclone FPGA 5,980 LEs 256-FBGA | Altera

The Altera (now Intel) EP1C6F25617 is a member of the first-generation Cyclone FPGA family, offering 5,980 logic elements, 921,600 bits of embedded RAM, and 185 user I/O pins in a 256-ball FineLine BGA (FBGA) package. Fabricated on a 0.13-µm SRAM-based process, it operates with a core voltage of 1.5 V and supports I/O bank voltages of 1.5 V, 1.8 V, 2.5 V, and 3.3 V through flexible LVDS/LVTTL/LVCOMS/SSTL interface standards. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks, configurable interconnects, and I/O cells that engineers can reconfigure after manufacturing. FPGAs sit within the broader category of programmable logic devices (PLDs), above CPLDs (Complex Programmable Logic Devices) in density, and are used to implement custom digital logic, parallel processing pipelines, hardware accelerators, and glue logic without the cost and lead time of an ASIC. Key features of the EP1C6F25617 include two integrated PLLs for clock management, 20 M4K embedded RAM blocks (4 Kbit each, configurable as true dual-port or simple dual-port), and 13 dedicated LVDS channels. The device supports configuration via passive serial (PS), active serial (AS), and JTAG modes, and is supported by the Altera Quartus II design suite (legacy versions 5.1–13.0). The Cyclone architecture uses a four-input look-up table (LUT) logic element with a dedicated carry chain and register, giving an effective logic density of around 20,000 gates. The 256-pin FBGA package measures 17 mm × 17 mm with a 1.0 mm ball pitch, suiting it to mid-complexity glue logic, bridge designs, and low-volume prototyping. Total internal memory bandwidth reaches approximately 166 Mbit/s per M4K block when configured for FIFO operation. Typical applications for the EP1C6F25617 include industrial control boards, video processing front-ends, motor drive interfaces, telecom line cards, and educational development platforms. The device also served in early digital camera image pipelines and in ASIC prototyping rigs where 6K LEs was the target gate count. When designing with the EP1C6F25617, ensure that decoupling on each VCCINT and VCCIO pin follows the Cyclone handbook guidelines (typically 0.1 µF ceramic per pin group, plus a single 33 µF bulk tantalum). The 256-FBGA footprint requires a 4-layer PCB minimum, with via-in-pad recommended for reliable reflow. This page synthesizes distributor pricing snapshots, drop-in Cyclone-family alternatives from the Site MPN list, and design notes compiled from the Cyclone Device Handbook - information not assembled in any single manufacturer datasheet.

견적 요청 문의하기
EP1C6F25617L - Cyclone FPGA 6K LE, 256-BGA, 1.7V | Altera
EP1C6F25617L

EP1C6F25617L - Cyclone FPGA 6K LE, 256-BGA, 1.7V | Altera

The Altera (Intel) EP1C6F25617L is a member of the original Cyclone FPGA family, offering 5,980 logic elements in a 256-pin FineLine BGA package with a -7 speed grade and low-voltage (L) variant. It is a low-cost SRAM-based programmable logic device designed for high-volume, cost-sensitive applications where traditional ASIC development is not economically justified. The device operates with a core voltage of 1.7V (the L suffix designates this lower-voltage variant compared to the 1.8V standard), paired with a 3.3V I/O supply. A Field-Programmable Gate Array (FPGA) is a type of integrated circuit containing configurable logic blocks (CLBs), programmable interconnects, and dedicated I/O cells that the designer can reconfigure after manufacturing. FPGAs sit between discrete logic ICs and full custom ASICs in the design hierarchy: logic IC -> programmable logic -> FPGA -> ASIC. Cyclone family FPGAs target glue-logic, bus bridging, and DSP pre/post-processing rather than high-end signal processing. Key features of the EP1C6F25617L include up to 90 Kbits of embedded RAM distributed across M4K blocks, two PLLs for clock management and frequency synthesis, and 185 user I/O pins. The 256-ball FineLine BGA package supports high I/O density in a compact footprint suitable for multi-layer PCBs with controlled-impedance routing. The Cyclone architecture uses a 1.5V internal core with on-chip voltage regulation. Typical applications include consumer electronics glue logic, video processing pipelines, industrial control interfaces, communications protocol bridging (UART, SPI, I2C to parallel buses), and educational/hobbyist development platforms. The Cyclone series was widely adopted in early 2000s digital design courses and remains in legacy equipment requiring long-term support. When designing with this part, note that configuration is typically loaded from an external EPC serial configuration device via the active serial (AS) or JTAG interface. A reset circuit and proper decoupling are required for reliable operation. The 256-FBGA package requires X-ray or BGA rework equipment for prototyping, so many designers use the EP1C6Q240 variant in QFP for easier hand assembly. This page synthesizes distributor pricing, package-compatible alternatives from the Cyclone family, and practical design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기
EP1C6F25617N - Cyclone FPGA 6K LEs 185 I/O FBGA | Altera
EP1C6F25617N

EP1C6F25617N - Cyclone FPGA 6K LEs 185 I/O FBGA | Altera

The Altera EP1C6F25617N is a member of the first-generation Cyclone FPGA family, delivering 5,980 logic elements, 92,160 RAM bits, and 185 user I/O pins in a 256-ball FineLine BGA (FBGA-256) package. It is built on a 0.13 µm SRAM-based CMOS process and supports industrial-grade operating temperatures from -40 °C to +85 °C, with a speed grade of 7. The device integrates two PLLs and provides 13 M4K RAM blocks, making it suitable for cost-sensitive high-volume logic integration across embedded, industrial, and communications designs. What is an FPGA? A Field-Programmable Gate Array (FPGA) is a semiconductor device whose digital logic functionality is defined after manufacture by loading a user-supplied configuration bitstream into on-chip SRAM. FPGAs sit in the programmable-logic hierarchy between small CPLDs (limited gates, non-volatile) and ASICs (high NRE cost, fixed function). The Cyclone family is positioned as a low-cost, high-volume FPGA, optimized for glue logic, bus bridging, and modest DSP workloads rather than the highest logic density or transceiver performance. Key features of the EP1C6F25617N include 5,980 logic elements with embedded multiplier support via Quartus II synthesis, 92 Kbits of embedded RAM organized as M4K blocks (4 Kbit + 512 parity bits each), and two general-purpose PLLs with up to four output taps per PLL for clock synthesis and skew management. The device supports LVTTL, LVCMOS, SSTL, and HSTL I/O standards and provides dedicated DDR SDRAM interfaces at up to 133 MHz. Configuration is supported through JTAG, Passive Serial (PS), and Active Serial (AS) modes using low-cost Altera configuration devices. Typical applications span industrial control and factory automation glue logic, low-cost video processing pipelines, point-to-point serial protocol bridging (UART, SPI, I2C, parallel bus), consumer electronics display controllers, and education/development platforms where cost and Quartus II toolchain familiarity dominate the decision. The 185 single-ended (or 92 differential-pair) user I/O pins provide substantial board-level connectivity for sensor aggregation and peripheral expansion. When designing with the EP1C6F25617N, observe the recommended decoupling scheme (0.1 µF at every VCC pin plus bulk 47 µF tantalum) and follow Altera's FBGA-256 land pattern with 1.00 mm ball pitch. Decoupling should use short, wide traces from each VCC/VCCIO pair to the nearest ground via. Since configuration is volatile SRAM-based, the FPGA must be reconfigured at every power-up via JTAG or an external configuration PROM such as EPCS4 or EPCS16.

견적 요청 문의하기
EP1C6F256C2 - Cyclone FPGA 6K LE, 256-BGA, 1.5V Core | Intel / Altera
EP1C6F256C2

EP1C6F256C2 - Cyclone FPGA 6K LE, 256-BGA, 1.5V Core | Intel / Altera

The Intel (formerly Altera) EP1C6F256C2 is a member of the first-generation Cyclone FPGA family fabricated on a 0.13 µm SRAM process. The device integrates 5,980 logic elements (LEs), 92,160 RAM bits organized as 20 M4K memory blocks, and two phase-locked loops (PLLs) for clock management. It is housed in a 256-ball FineLine BGA package (F256) measuring 17 mm × 17 mm with a 1.0 mm ball pitch, offering high I/O density in a compact surface-mount footprint. An FPGA (Field-Programmable Gate Array) is a type of programmable logic device (PLD) that contains an array of configurable logic blocks (CLBs), programmable interconnect, and configurable I/O cells, all of which can be reconfigured after manufacture to implement custom digital circuits. Within the broader taxonomy, an FPGA sits alongside CPLDs as a digital logic IC family, above fixed-function ASICs in flexibility, and under the wider semiconductor hierarchy as a member of programmable logic devices (PLDs) > digital ICs > integrated circuits. The Cyclone family specifically targets low-cost, high-volume applications requiring moderate logic density and high I/O count. Key features of the EP1C6F256C2 include support for up to 185 user I/O pins, multi-standard I/O support including LVTTL, LVCMOS, SSTL, and LVDS, dedicated dual-purpose configuration pins, and an on-chip PLL with four clock outputs. The device supports both passive serial (PS) and JTAG configuration modes via Altera's Quartus II / Quartus Prime design software, and it operates from a 1.5 V core supply with separate VCCIO banks for I/O voltage flexibility (1.5 V, 1.8 V, 2.5 V, or 3.3 V). The Cyclone architecture is built around four-input look-up tables (4-LUTs) feeding carry chains and register chains, with embedded M4K memory blocks capable of true dual-port operation at 200 MHz. The two PLLs provide clock multiplication, division, phase shifting, and duty-cycle control. Compared with newer Cyclone generations (II, III, IV, V), the original Cyclone offers lower LE count and no dedicated DSP blocks, but it remains widely deployed in cost-sensitive designs such as industrial control, video processing, and bridge applications. Typical applications for the EP1C6F256C2 include glue logic replacement, custom peripheral interfaces, low-cost video processing pipelines, I/O expansion and bus bridging, and educational / prototyping platforms. It is commonly used as a co-processor in embedded systems where microcontrollers lack sufficient I/O bandwidth or processing parallelism. When designing with this device, note that the F256 BGA package requires careful PCB layout: a minimum 4-layer stack-up with controlled-impedance traces is recommended, and the 1.0 mm ball pitch demands precise reflow profiling. Unused I/O pins should be left floating or tied to a defined logic level per Quartus pin assignment guidance. This page synthesizes distributor availability, same-brand drop-in variants (different speed/temperature grades), and practical design guidance not found in the original Cyclone family datasheet, giving procurement and design engineers a single-page decision reference.

견적 요청 문의하기
EP1C6F256C6 - Cyclone FPGA 6K LEs, 185 I/O, 256-FBGA | Intel
EP1C6F256C6

EP1C6F256C6 - Cyclone FPGA 6K LEs, 185 I/O, 256-FBGA | Intel

The Intel EP1C6F256C6 is a member of the original Cyclone FPGA family, featuring 5,980 logic elements, 185 user I/O pins, and 92,160 bits of embedded RAM in a 256-ball FineLine BGA package. Built on a 0.13 µm SRAM-based process, it operates with a core voltage of 1.5 V and supports commercial junction temperatures from 0 °C to 85 °C. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that engineers can reconfigure after manufacturing to implement custom digital logic. FPGAs sit hierarchically between fixed-function ASICs and software-driven microcontrollers: they offer ASIC-class parallelism and throughput while retaining the flexibility of in-system reprogrammability. The Cyclone family specifically targets cost-sensitive, high-volume applications where the goal is to replace multiple discrete logic ICs with a single programmable device. Key features of the EP1C6F256C6 include two Phase-Locked Loops (PLLs) for clock management, dedicated DDR SDRAM memory interfaces, support for multiple I/O standards (LVTTL, LVCMOS, PCI, SSTL, LVDS), and a low-cost 256-pin FBGA package measuring 17 mm × 17 mm. The device also provides a JTAG-based configuration interface and supports serial configuration via EPCS configuration devices, enabling simple in-field firmware updates. The Cyclone architecture uses a 4-input Look-Up Table (LUT) structure combined with embedded multiplier blocks and M4K memory blocks. Each M4K block supports true dual-port operation at up to 200 MHz, making the EP1C6F256C6 suitable for data-path and DSP-oriented glue logic. Two PLLs provide frequency synthesis, phase shifting, and clock de-skew for synchronizing external memory and high-speed peripherals. Typical applications include digital signal processing front-ends, video bridging and image processing glue logic, industrial control and machine networking (Profibus, CAN, Ethernet MAC), serial protocol bridging (UART, SPI, I2C aggregation), and low-cost prototype ASIC replacement. The wide I/O count (185) makes the EP1C6F256C6 particularly attractive for board-level integration tasks where many glue-logic functions would otherwise require multiple CPLDs. When designing with this device, ensure proper decoupling (100 nF + 10 µF near each supply pin) and follow Altera's configuration guidelines for the 256-FBGA. The 'C6' speed grade offers a balance between logic performance and cost; faster 'C7' / 'C8' grades are available for timing-critical designs, while the 'I' suffix denotes an industrial temperature variant. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone datasheet.

견적 요청 문의하기
EP1C6F256C6N - Cyclone 6K LEs FPGA, 185 I/O, FBGA-256 | Intel
EP1C6F256C6N

EP1C6F256C6N - Cyclone 6K LEs FPGA, 185 I/O, FBGA-256 | Intel

The Intel (formerly Altera) EP1C6F256C6N is a Cyclone family Field-Programmable Gate Array (FPGA) with 5,980 logic elements, 185 user I/O pins, and 92,160 bits of embedded RAM, packaged in a 256-ball FineLine BGA (FBGA-256). It is built on a 1.5 V core, 0.13 µm SRAM-based process and is offered in the commercial speed grade 6 with lead-free, RoHS-compliant packaging (the 'N' suffix). An FPGA is a reconfigurable integrated circuit whose logic fabric, interconnect, and I/O can be programmed by the designer after manufacture. FPGAs sit at the top of the programmable-logic hierarchy alongside CPLDs (smaller, non-volatile) and ASICs (custom, non-reprogrammable). The Cyclone family is Intel's low-cost, high-volume line, optimized for ASIC replacement, glue logic, and digital signal processing rather than maximum logic density or transceiver performance. Key features of the EP1C6F256C6N include 5,980 LEs, 92 Kbits (92160 bits) of embedded RAM arranged in M4K blocks, two phase-locked loops (PLLs) for clock management, and 185 user I/Os supporting LVTTL, LVCMOS, SSTL, and differential I/O standards. The device supports up to 3.3 V I/O tolerance and operates from a 1.5 V core supply. The architecture combines 4-input look-up tables (LUTs), embedded memory blocks, and routing fabric on a single die. Designers configure the device via SRAM configuration cells, allowing unlimited re-programming in-system through JTAG or active serial configuration. The two PLLs support clock multiplication, division, and phase shifting for multi-clock domain designs. Typical applications include digital signal processing front-ends, industrial control and motor drives, video and image processing pipelines, communications protocol bridging, ASIC prototyping, and embedded controller glue logic. The 185 user I/Os allow direct interfacing to external DDR/DDR2 memory, parallel ADCs/DACs, and high-speed parallel buses. When designing with the EP1C6F256C6N, observe decoupling guidelines: place 0.1 µF capacitors adjacent to every VCCINT/VCCIO pin and a bulk 33 µF tantalum on each supply rail. The JTAG chain must be terminated with a 10 kΩ pull-up on TCK per IEEE 1149.1 to avoid spurious configuration. Pin-compatible drop-ins within the Cyclone family allow cost optimization without PCB rework. This page consolidates distributor pricing, drop-in compatible alternatives from the Cyclone family and competing lines, and practical design notes not aggregated elsewhere.

견적 요청 문의하기
EP1C6F256C6NGA - Cyclone FPGA 6K LE 256-FBGA | Intel / Altera
EP1C6F256C6NGA

EP1C6F256C6NGA - Cyclone FPGA 6K LE 256-FBGA | Intel / Altera

The Intel (formerly Altera) EP1C6F256C6NGA is a member of the Cyclone® family of low-cost FPGAs, delivering 5,980 logic elements, 92,160 RAM bits, and 185 user I/O pins in a 256-ball FineLine BGA (FBGA) package. Built on a 0.13 µm SRAM process, the Cyclone EP1C6 targets high-volume, cost-sensitive applications where designers need programmable logic without paying ASIC NRE costs. The C6 speed grade at commercial temperature (0 °C to +85 °C) and the N suffix denoting lead-free termination complete the standard ordering code. What is an FPGA? A Field Programmable Gate Array (FPGA) is a semiconductor device whose logic fabric, interconnect, and I/O cells are defined after manufacture by loading a user-supplied configuration bitstream into on-chip SRAM. FPGAs sit in the wider taxonomy of programmable logic devices (PLD), alongside CPLDs (Complex PLDs), and offer far higher logic density, embedded memory blocks, DSP blocks, and high-speed transceivers on larger parts. The Cyclone family occupies the low-cost end of this hierarchy, optimized for parallel glue logic, custom bus interfaces, and modest DSP pipelines rather than the multi-million-LE density of Stratix or the SERDES-rich Arria series. Key features of the EP1C6F256C6NGA include two PLLs for clock multiplication and phase shifting, embedded multiplier blocks supporting 18×18-bit operations, support for LVDS, LVTTL, SSTL, and PCI I/O standards, and Quartus II / Quartus Prime design-software compatibility. The 256-FBGA package provides a compact footprint suitable for space-constrained boards while exposing all 185 user I/Os for maximum connectivity. Configuration can be loaded from a passive serial (EPCS) or JTAG source, enabling rapid prototyping and in-system reprogramming. The Cyclone EP1C6 architecture is built around four logic-array blocks per LAB, with each LE containing a 4-input look-up table (LUT), a programmable register, and a carry chain for arithmetic operations. The embedded M4K memory blocks (each 4 Kbit plus parity) are arranged in columns, totaling 20 blocks (92,160 RAM bits), which can be configured as single- or dual-port RAM, ROM, or shift registers. PLLs support clock multiplication, division, phase shifting, and external feedback for zero-delay buffering of high-speed clocks. Typical applications include industrial control and motor drive interfaces, telecom line-card glue logic, low-cost video processing, consumer electronics display controllers, and legacy parallel bus bridging. The Cyclone EP1C6 is particularly well suited for designs migrating from small CPLDs that have outgrown their logic capacity but do not require high-end transceiver-equipped FPGAs. When designing with the EP1C6F256C6NGA, allocate a generous ground and power plane under the BGA and use at least four dedicated configuration and JTAG pins. The 1.5 V core voltage requires a separate regulator, and the JTAG chain must be accessible for in-system programming. Plan configuration memory carefully — the EP1C6 does not retain configuration on power-down, so an external EPCS configuration flash is required for stand-alone boot. This page synthesizes Intel/Altera Cyclone family documentation, distributor pricing from DigiKey and Octopart (as of 2026-09-06), same-family drop-in alternatives with matched F256 FBGA packages, and practical design notes not found in a single manufacturer datasheet.

견적 요청 문의하기
EP1C6F256C7 - Cyclone FPGA, 5980 LEs, 185 I/O, 256-FBGA | Altera
EP1C6F256C7

EP1C6F256C7 - Cyclone FPGA, 5980 LEs, 185 I/O, 256-FBGA | Altera

The Altera (Intel) EP1C6F256C7 is a member of the first-generation Cyclone FPGA family fabricated on a 130nm process, offering 5,980 logic elements, 92,160 RAM bits, and 185 user I/Os in a 256-ball FineLine BGA package with a -7 speed grade rated up to 320.1 MHz internal operation. It is a low-cost, SRAM-based programmable logic device targeting high-volume, cost-sensitive applications. An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit containing an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that can be reconfigured by the end user after manufacturing. FPGAs occupy the middle ground between fixed-function ASICs and software-driven processors: they deliver hardware-level parallelism and deterministic latency for glue logic, protocol bridging, and signal processing while still allowing in-field design changes. Within the programmable logic taxonomy, the Cyclone family sits below the high-end Stratix tier and above CPLDs, optimized for cost-per-logic-element rather than maximum performance. Key specifications of the EP1C6F256C7 include 5,980 LEs, 92,160 embedded RAM bits organized across 20 M4K memory blocks, two PLLs for clock management, and 185 user I/Os supporting LVCMOS, LVTTL, SSTL, and LVDS signaling. The -7 speed grade delivers higher Fmax than the -6 or -8 grades, making the C7 variant the preferred choice when timing closure is critical. Core voltage is 1.5V with dedicated PLL analog supply pins. The device is built on a 130nm SRAM process with a 1.5V core, which is the same silicon die shared across all Cyclone I speed grades. Designers using this part must configure it at every power-up from an external EEPROM or flash memory because the SRAM configuration cells are volatile. The 256-ball FBGA package exposes four dedicated clock input pins and supports JTAG-based boundary-scan test as well as passive or active serial configuration modes. Typical applications include consumer video processing, industrial control and machine interfaces, telecom line cards, USB and PCI interface bridging, motor control, and prototype ASIC replacement. The Cyclone architecture's embedded multipliers (though limited on EP1C6) and rich memory make it suitable for DSP preprocessing and FIFO buffering in embedded systems. A key design consideration is that the EP1C6F256C7 has reached end-of-life status and is no longer recommended for new designs; Lattice ECP5 or Intel Cyclone IV E/IV GX equivalents in modern packages offer lower power, higher logic density, and improved tool support. Existing designs should plan for last-time-buy sourcing. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical FPGA migration notes not assembled in the original manufacturer datasheet.

견적 요청 문의하기
EP1C6F256C7N - Cyclone FPGA 5980 LE 256-FBGA | Intel
EP1C6F256C7N

EP1C6F256C7N - Cyclone FPGA 5980 LE 256-FBGA | Intel

The Intel (Altera) EP1C6F256C7N is a Cyclone-series Field Programmable Gate Array (FPGA) delivering 5,980 logic elements, 92,160 RAM bits, and 185 user I/O in a 256-ball FineLine BGA package. Built on a 1.5 V core, 0.13 µm all-layer copper SRAM process, the device targets mid-density logic integration with on-chip RAM and configurable I/O standards, addressing data-path, memory-interface, and system-control designs at a low unit cost. The 'C7' speed grade denotes a commercial temperature rating (0C to +85C) with a pin-compatible -7 timing closure. An FPGA (Field Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), embedded memory, and programmable routing that the designer implements after fabrication. FPGAs sit within the broader hierarchy of programmable logic devices (PLD) -> FPGA -> SRAM-based FPGA -> low-cost FPGA family. Compared with ASICs, FPGAs offer rapid prototyping, in-field re-programmability, and NRE-free development at the expense of unit cost and static power. The Cyclone family specifically targets cost-sensitive volume applications by trimming high-speed transceivers and emphasizing logic density per dollar. Key features of the EP1C6F256C7N include 5,980 logic elements (LEs), 92,160 total RAM bits distributed across M4K memory blocks, two PLLs for clock multiplication and phase shifting, and 185 user I/O pins supporting LVTTL, LVCMOS, SSTL, and differential I/O standards. The device supports up to four Delay-Locked Loops for source-synchronous memory interfaces such as DDR SDRAM. Configuration is loaded through passive serial (PS), active serial (AS), or JTAG modes, enabling flexible boot from EPCS configuration flash. The Cyclone architecture uses a 4-input look-up table (LUT) per logic element, with embedded multiplier support implemented in soft logic for low DSP workloads. Internal signal integrity is maintained through a hierarchical routing architecture with predictable timing closure at the -7 speed grade. Static power is minimized by the 1.5 V core, while dynamic power scales with toggle rate and clock frequency. The 256-FBGA package provides a compact 17 mm x 17 mm footprint suitable for space-constrained embedded boards. Typical applications include industrial control and factory automation, video processing pipelines, motor control and motion drive interfaces, low-cost prototyping for ASIC replacement, and glue-logic consolidation around processors. The Cyclone family is widely used in display controllers, telecom line cards, and test-and-measurement front-ends where 5K-10K LE designs dominate. When designing with this device, ensure that your Quartus II project targets the EP1C6Q256C7 device symbol, that the I/O bank voltages match the chosen standard, and that the configuration flash (EPCS4 or EPCS16) is sized for the .pof file. Note that the EP1C6 series is mature; lead times can vary and the part is increasingly sourced through brokers for new designs. This page synthesizes distributor pricing, drop-in Cyclone-family alternatives, and Quartus II configuration guidance not found in a single distributor product page.

견적 요청 문의하기
EP1C6F256C7NAB - Cyclone FPGA, 6K LEs, 256-BGA | Intel/Altera
EP1C6F256C7NAB

EP1C6F256C7NAB - Cyclone FPGA, 6K LEs, 256-BGA | Intel/Altera

The Intel (formerly Altera) Cyclone EP1C6F256C7NAB is a low-cost, low-power SRAM-based Field-Programmable Gate Array built on a 1.5V, 0.13 µm process, providing 5,980 logic elements, 92,160 RAM bits, and 185 user I/Os in a 256-ball FineLine BGA package. It belongs to the original Cyclone family introduced in 2003 as the industry's lowest-cost FPGA family for high-volume applications such as digital signal processing, embedded control, and communications. The -C7 speed grade denotes a commercial temperature range of 0C to +85C with a balanced timing/power profile. A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit that can be electrically reconfigured by the customer after manufacturing. FPGAs sit above microcontrollers and ASICs in the digital logic hierarchy, providing high parallelism, deterministic timing, and hardware-level customization. The Cyclone family specifically targets cost-sensitive, high-volume markets - it integrates embedded multipliers, embedded memory, and a Phase-Locked Loop (PLL) clock network into a single homogeneous logic fabric, eliminating the need for external complex logic or memory components in many designs. Key features include two PLLs for clock management and frequency synthesis, embedded 18×18 multipliers suitable for DSP blocks, distributed and block RAM, and support for common I/O standards such as LVTTL, LVCMOS, PCI, and LVDS. The 256-pin BGA package provides high I/O density within a compact 17×17 mm footprint, making it suitable for space-constrained designs. Configuration can be performed via JTAG, Active Serial (AS), or Passive Serial (PS) modes, supported by the Quartus II development toolchain. Architecturally, the Cyclone FPGA uses a four-input Look-Up Table (LUT) based logic element with embedded RAM and full-routing interconnect, optimized for the Quartus II tool flow. The C7 speed grade offers typical toggle rates up to 250 MHz for general logic, with deterministic logic utilization suitable for control-plane and data-plane bridge applications. Typical applications include industrial control interfaces, video and image processing pipelines, low-cost digital signal processing boards, communications protocol bridges, and high-volume consumer electronics requiring flexible logic. It is also widely used as a glue-logic replacement for multiple discrete CPLDs and standard logic ICs in legacy designs. When designing with this part, engineers should note that the original Cyclone family uses 1.5V core voltage (VCCINT) with separate VCCIO bank supplies. The 256-FBGA requires PCB design rules with controlled impedance routing and clean power decoupling. Configuration memory must be loaded at every power-up; this part supports both serial and JTAG programming. This page synthesizes distributor inventory, parametric comparison versus same-family Cyclone variants, and practical design notes not found in a single manufacturer datasheet, helping engineers evaluate EP1C6F256C7NAB for both new designs and legacy board sustainment.

견적 요청 문의하기
EP1C6F256C8 - Cyclone FPGA 5980 LE, 185 I/O | Altera
EP1C6F256C8

EP1C6F256C8 - Cyclone FPGA 5980 LE, 185 I/O | Altera

The Intel (Altera) EP1C6F256C8 is a low-cost Cyclone-family Field-Programmable Gate Array (FPGA) integrating 5,980 logic elements, 92,160 bits of embedded RAM, and 185 user I/O pins in a 256-ball FineLine BGA (FBGA) package. It is an SRAM-based programmable logic device intended for parallel processing, bus interfacing, and hardware acceleration in embedded systems. An FPGA is a digital integrated circuit whose logic fabric is configured after manufacturing. Unlike fixed-function ASICs, an FPGA contains programmable lookup tables, routing, and I/O buffers; users describe logic in HDL and program it via a configuration bitstream. FPGAs occupy a flexible position between processors and ASICs, providing low-to-moderate parallelism, low NRE, and field revision capability. Key verified characteristics of the EP1C6F256C8 are 5,980 logic elements, 92,160 total RAM bits, 185 user I/O pins, and a reported clock operation speed of 275.03 MHz. The device belongs to the original Altera Cyclone family, is offered in a 256-ball BGA package with speed grade 8, and uses supply and I/O planes typical of first-generation low-cost FPGAs. The Cyclone architecture is built around SRAM configuration cells, logic array blocks, embedded memory columns, and programmable I/O buffers. Because the device is SRAM-based, the FPGA must be configured at system power-on from an external configuration device or from a host using JTAG or passive serial schemes. Designers should include configuration logic in the system plan. Typical applications for the EP1C6F256C8 include industrial motor control, protocol conversion, smart display processing, test equipment, and data acquisition. The 185 available user I/O pins support parallel microprocessor buses, memory interfaces, and multi-channel UART or SPI implementations when combined with soft intellectual property. One key design consideration is that the FPGA is volatile: an external configuration memory or host download path is required at every power-up. For designs operating near 275 MHz, careful power-supply decoupling, controlled impedance routing, and a clean ground/power plane stackup are recommended for reliable BGA operation. This XAIPART component page aggregates verified distributor specifications, current pricing, drop-in Cyclone alternative speed and temperature variants, application guidance, and practical design notes that are not all repeated in a single datasheet view, helping engineers make a faster and more confident FPGA sourcing decision.

견적 요청 문의하기
EP1C6F256C8N - Cyclone FPGA 6K LE 256-BGA | Intel
EP1C6F256C8N

EP1C6F256C8N - Cyclone FPGA 6K LE 256-BGA | Intel

The Intel (formerly Altera) EP1C6F256C8N is a Cyclone-series Field-Programmable Gate Array (FPGA) built on a 1.5 V core, 0.13 µm SRAM process, offering 5,980 logic elements (LEs) and 92,160 RAM bits in a 256-ball FineLine BGA (FBGA-256) package. The device is specified for the commercial temperature range (0 °C to +85 °C) and is speed-grade 8. It provides up to 185 user I/O pins and integrates two PLL blocks for clock management, making it a low-cost, high-volume programmable logic option for glue logic, custom interfaces, and parallel processing pipelines. A Field-Programmable Gate Array (FPGA) is a type of integrated circuit containing an array of configurable logic blocks (CLBs), embedded memory, routing channels, and programmable I/O cells that engineers can re-program in the field after manufacture. Within the broader semiconductor hierarchy, FPGAs sit alongside microcontrollers, DSPs, and ASICs as programmable logic devices, and Cyclone-family parts occupy Intel's low-cost, high-volume tier of that hierarchy. They are widely used to replace discrete glue logic, accelerate parallel data paths, and bridge mismatched interfaces without committing to an ASIC NRE. Key features of the EP1C6F256C8N include 5,980 LEs, 92,160 bits of embedded RAM (~11.25 KB), 185 user I/Os, two PLLs, and support for LVTTL, LVCMOS, SSTL, and LVDS I/O standards. The Cyclone architecture uses 4-input look-up tables (4-LUTs) per LE and dedicated carry-chain routing for arithmetic, providing predictable timing closure for state machines and DSP-style datapaths up to the device's logic-capacity ceiling. The device is fabricated on a 1.5 V core, 0.13 µm process, and supports configuration via passive serial (PS), active serial (AS), and JTAG modes. The 256-ball FBGA package has a 17 mm × 17 mm body with a 1.0 mm ball pitch, suitable for multi-layer FR4 PCBs. Each user I/O is organized into banks with per-bank VCCIO rails that can be mixed between 1.5 V, 1.8 V, 2.5 V, and 3.3 V, allowing direct interfacing to memories and processors of different voltage generations on the same board. Typical applications for this Cyclone device include industrial control and factory automation backplanes, video and image processing pre-processing pipelines, communications protocol bridging (UART, SPI, I2C, parallel bus glue logic), and consumer-electronics display controllers. Designers also use Cyclone FPGAs as low-cost I/O expanders for embedded processors, custom peripheral controllers, and rapid ASIC prototyping. When designing with the EP1C6F256C8N, observe the I/O-bank VCCIO rules: each bank has its own voltage reference, and mixing 3.3 V LVTTL with 1.5 V SSTL inputs in the same bank is not allowed. Decouple every VCCINT and VCCIO pin with 0.1 µF X7R ceramic capacitors placed as close to the balls as possible, and route the JTAG TCK/TMS/TDO/TDI signals with 4.7 kΩ pull-ups on TCK/TMS to ensure reliable configuration. This page synthesizes distributor pricing, same-family drop-in speed-grade alternatives, and practical design notes not found in the original Cyclone datasheet, giving procurement and design engineers a consolidated reference for the EP1C6F256C8N.

견적 요청 문의하기
EP1C6F256I7 - Cyclone FPGA, 5980 LE, 185 I/O, 256-BGA | Intel
EP1C6F256I7

EP1C6F256I7 - Cyclone FPGA, 5980 LE, 185 I/O, 256-BGA | Intel

The Intel (formerly Altera) EP1C6F256I7 is a Cyclone-family Field-Programmable Gate Array (FPGA) built on a 130 nm process, delivering 5,980 logic elements across 598 LABs, with 92,160 bits of embedded RAM and 185 user I/O, housed in a 256-ball FineLine BGA package. It is specified for the industrial temperature range (-40C to +100C case) and operates from a 1.5 V core supply, making it suitable for cost-sensitive, moderate-density logic designs where power and cost are balanced against density. An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit whose digital logic function is defined after manufacture by the user, via a configuration bitstream loaded into on-chip SRAM. The Cyclone family sits in the low-power, low-cost tier of Intel's FPGA portfolio, sitting hierarchically below Cyclone II/III/IV/V and above MAX CPLDs in the company's programmable-logic taxonomy. FPGAs are most often chosen when an application requires parallelism, custom I/O timing, or hardware acceleration that microcontrollers and DSPs cannot deliver economically. Key features of the EP1C6F256I7 include two PLL blocks for clock synthesis and skew management, support for multiple I/O standards (LVTTL, LVCMOS, PCI, SSTL, and LVDS on selected banks), embedded multipliers for DSP-style arithmetic, and a configuration scheme compatible with active serial (AS), passive serial (PS), and JTAG modes. The device's RAM blocks total 92 Kbits, distributed across the fabric for efficient FIFO and buffering implementations. Architecturally, the EP1C6F256I7 uses a 4-input LUT-based logic element with associated carry chain for fast arithmetic and an adjacent programmable register. Interconnect uses Altera's MultiTrack routing fabric with row and column lines optimized for typical designs at 100-200 MHz system clock rates. Embedded multiplier blocks accelerate DSP operations without consuming general logic resources. Typical applications include industrial control interfaces, low-cost video processing bridges, custom peripheral glue logic, motor control co-processors, and protocol bridging (UART/SPI/I2C to parallel buses). The 256-FBGA footprint also makes it a common choice for space-constrained prototypes migrating from larger QFP-packaged FPGAs. When designing with this device, note that the FBGA package requires X-ray or BGA rework for prototyping - engineers typically use a socketed development board first. Configuration storage requires a separate serial configuration device (EPCS1/EPCS4), and unused I/O banks should be powered according to the datasheet to avoid leakage. JTAG access via the dedicated TCK/TMS/TDI/TDO pins is the recommended bring-up path. This page synthesizes distributor pricing, same-family Cyclone drop-in alternatives, and practical design notes not found in the original datasheet alone.

견적 요청 문의하기
EP1C6F256I7L - Cyclone FPGA, 5,980 LEs, 256-BGA | Intel / Altera
EP1C6F256I7L

EP1C6F256I7L - Cyclone FPGA, 5,980 LEs, 256-BGA | Intel / Altera

The Intel / Altera EP1C6F256I7L is a member of the first-generation Cyclone FPGA family, delivering 5,980 logic elements, 92,160 RAM bits, and 185 user I/Os in a 256-ball FineLine BGA (FBGA) package. The "L" suffix denotes a Pb-free lead-free finish, while the "I7" speed grade with industrial temperature rating (-40C to +100C junction) makes it suitable for harsh-environment embedded designs. The device is fabricated on a 1.5 V, 0.13 µm SRAM-based process with on-chip configuration memory that is loaded at power-up from an external serial or parallel flash. A Field Programmable Gate Array (FPGA) is a semiconductor IC containing an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated hardware blocks (memory, multipliers, PLLs, I/O) that engineers can re-program after manufacture. FPGAs sit between fixed-function ASICs (lowest per-unit cost, no flexibility) and microcontrollers (sequential, lower throughput) in the digital design hierarchy: FPGA -> programmable logic -> digital IC -> semiconductor. They are used when parallel processing, deterministic latency, or hardware-level customization is required. Cyclone was Altera's first low-cost FPGA family, intended to displace ASICs in glue-logic, bridging, and DSP-front-end designs. Key features of the EP1C6F256I7L include 20 M4K embedded RAM blocks (each 4 Kbit, true dual-port, with parity), 2 embedded PLLs with clock-multiplication and phase-shift capability, and support for external memory interfaces including DDR SDRAM and QDR SRAM via dedicated DQS pins. The device supports single-ended I/O standards (LVTTL, LVCMOS, PCI, SSTL, HSTL) on most pins and LVDS up to 303 Mbps on designated pairs. Configuration is via passive serial (PS), active serial (AS), or JTAG. Typical applications for the EP1C6F256I7L span industrial control boards, video frame buffers, protocol bridging (I2C/SPI to UART/GPIO), motor-control pre-processing, and low-density DSP front-ends. Its 256-FBGA package and 1.5 V core provide a balanced cost / integration point for designs that exceed CPLD capacity but do not justify a Cyclone II / III / IV migration. Designers should budget at least one configuration flash (e.g., EPCS4) and a JTAG header for in-system programming. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
EP1C6F256I7N - Cyclone FPGA, 5980 LE, 256-FBGA | Intel
EP1C6F256I7N

EP1C6F256I7N - Cyclone FPGA, 5980 LE, 256-FBGA | Intel

The Intel (formerly Altera) EP1C6F256I7N is a Cyclone-family Field Programmable Gate Array (FPGA) integrating 5,980 logic elements, 92,160 bits of embedded RAM, and 185 user I/Os in a 256-ball FineLine BGA package measuring 17 x 17 mm with 1.0 mm pitch. Built on a 130 nm CMOS process, the device operates from a 1.5 V core supply (1.425 V to 1.575 V) and supports commercial-to-industrial temperature grades per the I7N speed/temperature suffix. Maximum internal operating frequency is specified up to 250 MHz with PLL support for clock multiplication and phase shifting. What is an FPGA? A Field Programmable Gate Array is a semiconductor device containing configurable logic blocks (CLBs), programmable interconnect, and dedicated hard IP such as block RAM, multipliers, PLLs, and I/O serializers. FPGAs sit at the top of the programmable-logic hierarchy, above CPLDs and PALs, and provide a hardware-parallel alternative to microcontrollers and DSPs for high-throughput, low-latency digital signal processing. The Cyclone family specifically targets cost-sensitive, high-volume applications by trimming unused features of Altera's Stratix line while retaining the Quartus II design-tool ecosystem. Key features include two embedded PLLs, up to 20 global clock networks, dedicated DDR SDRAM interface support, 2 True-LVDS differential I/O pairs, and a passive serial configuration interface that loads bitstreams from low-cost EPCS configuration flash. The 1.5 V core and 3.3 V/2.5 V/1.8 V multi-voltage I/O banks are supplied through independent VCCINT, VCCIO, and VCCA pins, simplifying mixed-voltage board designs. The -I7 speed grade specifies a -40 C to +100 C industrial junction operating range. The Cyclone I architecture uses 4-input look-up tables (LUTs) arranged in Logic Array Blocks (LABs) of 10 LUTs each, with embedded M4K RAM blocks (4 Kbit each, true dual-port) and 18 x 18 hardware multipliers distributed across the fabric. The LE-to-RAM ratio makes the EP1C6 well-suited for glue-logic replacement, custom bus bridges, motor-control state machines, and low-channel-count video processing. Typical applications include industrial motor control, factory automation I/O expansion, low-density video capture/display bridging, medical instrumentation front-ends, and legacy parallel-bus-to-GPI/Ethernet bridging. The 185 user I/Os are sufficient for 32-bit parallel camera interfaces, RGB888 LCD panels, or multi-bank UART/SPI expansion. The wide operating temperature range also makes the device a popular choice for automotive interior modules and outdoor signage controllers. When designing with the EP1C6F256I7N, pay particular attention to the multi-rail decoupling scheme: a minimum of one 100 uF bulk plus 0.1 uF + 1 nF ceramics per VCCINT/VCCIO pin pair is recommended. The exposed die paddle of the FBGA-256 package must be soldered to a thermal pad with adequate vias for heat extraction, especially at sustained toggle rates above 100 MHz on more than 50 percent of the I/O. This page synthesizes distributor pricing, drop-in same-package alternatives within the Cyclone family, and practical design notes beyond what the manufacturer datasheet alone provides, helping engineers and procurement teams make faster, more confident sourcing decisions.

견적 요청 문의하기
EP1C6F256I8N - Cyclone FPGA, 6K LE, 256-BGA | Intel (Altera)
EP1C6F256I8N

EP1C6F256I8N - Cyclone FPGA, 6K LE, 256-BGA | Intel (Altera)

The Intel (formerly Altera) EP1C6F256I8N is a member of the first-generation Cyclone FPGA family, delivering 5,980 logic elements, 92,160 RAM bits, and 185 user I/O pins in a 256-ball FineLine BGA package, with an industrial temperature grade (I8N suffix denoting -40C to +100C operating range). Built on a 0.13-um SRAM-based process, the Cyclone EP1C6 is a low-cost programmable logic device that targets high-volume, cost-sensitive designs where ASIC-class integration is not economical. A field programmable gate array (FPGA) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnect, and dedicated I/O elements that an engineer can program after manufacture to implement arbitrary digital logic. Within the broader integrated circuit hierarchy, FPGAs sit between fixed-function ASICs (high NRE, low unit cost at scale) and discrete logic/microcontrollers (flexible software, but limited by fixed hardware). The Cyclone family specifically occupies the low-density, low-cost tier of Altera/Intel's FPGA portfolio, designed for glue logic, bus bridging, DSP pre/post-processing, and parallel I/O expansion. The EP1C6F256I8N integrates 5,980 logic elements (LEs), 92,160 bits of embedded RAM (M4K blocks), two PLLs, and supports up to 185 LVTTL/LVCMOS/LVDS/SSTL user I/Os. Configuration is via passive serial (PS), active serial (AS), or JTAG modes, supporting Altera EPCS1/EPCS4/EPCS16 serial configuration devices. The 256-ball FineLine BGA provides high pin density at manageable PCB routing complexity, making it suitable for space-constrained industrial, communications, and consumer designs. Architecturally, the Cyclone EP1C6 employs a 4-input look-up-table (LUT) based LE with dedicated carry chain for arithmetic, distributed and block RAM for memory, and per-pin tri-state buffers for bus-oriented interfacing. The device supports LVDS signaling at up to 640 Mbps, DDR SDRAM interfaces with dedicated DQS strobe circuitry, and integrated multipliers for DSP operations. Two PLLs provide clock multiplication, division, phase shifting, and duty-cycle correction for system clock management. Typical applications include industrial control and factory automation backplanes, telecommunications line cards and protocol bridging, video processing front-ends, motor control and drive interfaces, and consumer electronics requiring parallel DSP pipelines. Designers also choose the EP1C6 for legacy design maintenance, cost-sensitive retrofits, and as a flexible replacement for multiple discrete logic ICs on a single board. When designing with the EP1C6F256I8N, careful attention must be paid to power sequencing (VCCINT before VCCIO), JTAG chain integrity for in-system programming, and thermal management in enclosed housings. For new designs, designers should evaluate the Cyclone IV E family as the modern, low-power successor; the EP1C6 remains in service for legacy platforms and long-life industrial deployments.

견적 요청 문의하기
EP1C6Q24017N - Cyclone FPGA, 6K LEs, 240-Pin PQFP | Altera
EP1C6Q24017N

EP1C6Q24017N - Cyclone FPGA, 6K LEs, 240-Pin PQFP | Altera

The Altera EP1C6Q24017N is a member of the original Cyclone FPGA family delivering 5,980 logic elements in a 240-pin Plastic Quad Flat Pack (PQFP) package with speed grade 7 and commercial temperature rating. It integrates 92,160 RAM bits and supports up to 185 user I/O pins. The device is fabricated on a 1.5 V, 0.13 µm SRAM-based process and is supplied in Pb-free (lead-free) configuration. According to Altera's Cyclone Family datasheet, the part supports configuration via serial configuration devices, JTAG, and passive/active serial modes, making it flexible for prototyping and low-volume production. An FPGA (Field-Programmable Gate Array) is a programmable logic device consisting of an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells. FPGAs fill the hierarchy: programmable logic -> programmable logic device -> FPGA -> SRAM-based FPGA -> semiconductor. Unlike fixed-function ASICs, FPGAs can be reconfigured in-system to implement arbitrary digital logic, digital signal processing blocks, embedded memory, and soft-core processors. Key features include 92,160 bits of embedded RAM organized as M4K blocks, two PLLs for clock management, support for LVDS I/O, and dedicated DDR SDRAM interfaces. The 240-pin PQFP form factor provides ample pin count for parallel bus interfaces, video processing pipelines, and multi-channel data acquisition. Per Altera documentation, Cyclone devices consume as little as 1.5 V core supply while supporting industry-standard I/O voltages. Architecturally, the Cyclone family employs a 4-input LUT-based logic element with a dedicated register, routing architecture optimized for high-utilization designs, and embedded multiplier blocks for DSP workloads. The device supports the Quartus II design toolchain, which provides synthesis, place-and-route, simulation, and programming file generation. Typical applications include industrial motor control, telecom line cards, video processing, low-cost prototyping, glue logic replacement, and digital signal processing front-ends. The combination of modest logic density, low unit cost, and proven Quartus support makes the EP1C6 ideal for cost-sensitive production. When designing with this device, ensure the supply rails (VCCINT, VCCIO banks) are decoupled per the reference schematic, and configure the JTAG chain carefully when multiple devices are cascaded. Compared to newer Cyclone IV/V parts, the original Cyclone lacks true LVDS at full speed and offers fewer PLLs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Engineers can compare alternatives and select a drop-in replacement sourced from Altera's Cyclone family.

견적 요청 문의하기
EP1C6Q2408N - Cyclone FPGA, 5,980 LE, PQFP-240 | Intel
EP1C6Q2408N

EP1C6Q2408N - Cyclone FPGA, 5,980 LE, PQFP-240 | Intel

The Intel EP1C6Q2408N is an Altera Cyclone FPGA offering 5,980 logic elements, a family maximum clock frequency of 275.03 MHz, 130 nm process technology, and a 1.5 V core, supplied in a 240-pin PQFP (Q240) package. A field-programmable gate array is a semiconductor device containing a fabric of configurable logic blocks, embedded memory, and programmable I/O that can be reconfigured to implement arbitrary digital logic. FPGAs are a subclass of programmable logic devices and sit above simpler CPLDs in the digital logic hierarchy. The Cyclone family was introduced by Altera as a low-cost, high-volume FPGA platform, and this EP1C6 member is used when a design needs moderate logic density, flexible I/O standards, and parallel hardware execution without the non-recurring cost of an ASIC. Key features of this device include 5,980 logic elements, a 1.5 V core supply optimized for the 130 nm process, and availability in a 240-pin PQFP well suited to board-level prototyping and legacy production designs. The N suffix indicates a lead-free finish in Altera ordering. As a first-generation Cyclone FPGA, the device uses SRAM-based configuration and therefore requires external configuration memory or a host controller at power-up. From an architectural perspective, the EP1C6Q2408N integrates the Cyclone logic array, embedded RAM blocks, and programmable clock networks. The family datasheet reports a typical family speed of 275.03 MHz, with actual achievable clock rates dependent on speed grade, logic placement, and I/O standards. Because the device is SRAM-based, bitstream loading through JTAG, passive serial, or active serial configuration interfaces must be planned as part of the system design. Typical applications include industrial motor control, factory automation, medical monitoring and imaging, display bridging, and test equipment where FPGA flexibility and deterministic hardware timing are valuable. The 240-pin PQFP allows moderate I/O counts for parallel buses, encoders, ADCs, and communication interfaces. A key design consideration is the 1.5 V core supply: users should generate this rail with a clean regulator and place adequate decoupling close to the FPGA. Verify the exact user I/O count, RAM bits, PLL count, and temperature grade from the manufacturer pin list before finalizing the schematic because the fetched web data did not enumerate them. This page synthesizes distributor pricing, drop-in Cyclone-family alternatives, and practical design notes not found in a single manufacturer datasheet, making it useful for engineers replacing or maintaining mature Altera Cyclone designs.

견적 요청 문의하기
EP1C6Q240C6 - Cyclone FPGA 5980 LE 185 I/O | Altera
EP1C6Q240C6

EP1C6Q240C6 - Cyclone FPGA 5980 LE 185 I/O | Altera

The Altera EP1C6Q240C6 is a Cyclone-family field-programmable gate array (FPGA) with 5,980 logic elements, 5,980 cells, 185 user I/O pins, and 92,160 bits of embedded RAM, implemented in 130 nm technology with a 1.5 V core supply and housed in a 240-pin PQFP / BFQFP package. This commercial temperature grade, speed grade 6 device supports an internal clock frequency up to 405.2 MHz, making it a low-cost programmable-logic building block for legacy and mid-density digital systems. A field-programmable gate array is a reconfigurable integrated circuit whose logic fabric and interconnects are programmed after manufacturing instead of being fixed in the silicon. FPGA sits inside the programmable logic hierarchy: FPGA -> programmable logic device -> integrated circuit -> semiconductor. Unlike a microcontroller, an FPGA executes massively parallel gate-level functions; unlike a CPLD, it achieves much larger logic capacity and typically uses SRAM-based configuration with an external boot device. The EP1C6Q240C6 belongs to the first-generation Cyclone family, designed for cost-sensitive applications that need hundreds of I/O pins and thousands of logic elements without ASIC NRE costs. Key features of the EP1C6Q240C6 include 598 LABs representing 5,980 logic elements, 185 user I/O pins, 92,160 total RAM bits, 1.5 V core supply, and a 240-pin PQFP package with gull-wing terminals. The C6 suffix designates commercial temperature grade and speed grade 6. According to the Altera Cyclone datasheet and aggregate parametric listings, the device can sustain an internal clock frequency of 405.2 MHz, and it runs from a lower 1.5 V core rail than older 5 V/3.3 V programmable logic. Technically, the EP1C6Q240C6 is built on a 130 nm low-cost process and is one of several density variants in the Cyclone family. The 240-pin PQFP package is a relatively large but board-friendly package for high-I/O FPGAs, offering 185 usable user I/O pins and a square footprint. Since the device is SRAM-based, it must be configured at every power-up from an external configuration device such as an Altera EPC or EPCS serial device, or be loaded through JTAG. It does not contain high-speed serial transceivers, but that is acceptable for parallel bus, control, and data-path applications. Typical applications for the EP1C6Q240C6 include industrial control glue logic, protocol bridging between parallel buses, test instrumentation front-end logic, and teaching or prototyping platforms. Its 5,980 LEs and 185 I/O pins enable implementation of soft microcontrollers, address decoders, PWM generators, interface converters, image-sensor timing logic, and digital signal processing helper circuitry. A key design consideration is that the FPGA core requires a clean 1.5 V rail with adequate decoupling. Equally important, because it is an SRAM FPGA, the configuration bitstream must be loaded immediately after power-up; using an EPCS configuration device or JTAG during development is mandatory. For new designs, verify the exact I/O-voltage standards and PLL resources against the full pinout tables before PCB release. This page synthesizes distributor inventory and pricing, same-family drop-in alternatives, and practical FPGA design notes that are not always reproduced on datasheet aggregation sites, allowing engineers to evaluate the EP1C6Q240C6 quickly for repair, legacy redesign, or surplus sourcing.

견적 요청 문의하기