10AS032H2F34E1HG - Arria 10 SX SoC FPGA, 320K LE, 1152-FBGA | Intel
부품 번호: 10AS032H2F34E1HG ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2046.5 | $2,046.50 |
| 10 | $1841.85 | $18,418.50 |
| 25 | $1637.2 | $40,930.00 |
| 50 | $1432.55 | $71,627.50 |
| 100 | $1227.9 | $122,790.00 |
10AS032H2F34E1HG 개요
An SoC FPGA is an integrated circuit that merges a general-purpose processor subsystem with a programmable FPGA fabric on a single die, allowing designers to allocate compute-intensive or latency-critical functions to dedicated hardware while running control-plane software on the embedded CPU. SoC FPGAs sit in the broader hierarchy of programmable logic devices (PLD -> FPGA -> SoC FPGA -> embedded platform), and the Arria 10 SX family targets mid-range applications where high transceiver count, DSP performance, and processor integration are required without paying the cost of a Stratix-class device.
Key differentiating specifications include 320,000 logic elements, embedded transceivers up to 12.5 Gbps, 1.5 GHz dual-core ARM Cortex-A9 MPCore with CoreSight debug, 384 user I/O pins, 0.9 V core voltage, and AEC-Q100-style industrial-grade temperature support. The part also exposes hard memory controllers, PCIe Gen3 hard IP blocks, and a rich peripheral set routed through the HPS-to-FPGA bridge.
The device is built on TSMC's 20 nm process, providing optimal logic density at moderate power. The integrated CoreSight subsystem offers non-intrusive trace, and the HPS includes DDR3/DDR4 controller support for high-bandwidth memory access, enabling single-chip designs that previously required separate processor and FPGA components.
Typical applications include high-speed industrial imaging, military radar signal processing, medical imaging backplanes, test and measurement instrumentation, and high-bandwidth protocol bridging. The combination of hard ARM cores and dense FPGA fabric makes the part ideal for designs that mix deterministic hardware acceleration with Linux-capable software stacks.
When designing with the 10AS032H2F34E1HG, plan thermal management carefully - the FC-FBGA package requires controlled impedance PCB stack-up and substantial copper for heat dissipation. Use Altera/Intel Quartus Prime for synthesis and configuration, and consider the device's power-on sequencing requirements for proper HPS and FPGA bring-up.
This page synthesizes distributor pricing, drop-in alternatives from the same Arria 10 SX family, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: 10AS032H2F34E1HG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: 10AS032H2F34E1HG (동일 폼 팩터 및 풋프린트) — 차이점: Mounting Type, Package, Logic Elements, Configuration, Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
10AS032H1F34E1HG
✅ 드롭인✓ 재고 있음
$1755 / 개
데이터시트 보기 →10AS032H3F34E1HG
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
10AS027H1F34E1HG
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
10AS032H2F34E2HG
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
10AS032H2F34I1HG
✅ 드롭인✓ 재고 있음
$2700.05 / 개
데이터시트 보기 →10AS032H2F34E1HG 최대 정격 & 전기적 특성
| Family | Arria 10 SX |
| Core Type | Dual ARM Cortex-A9 MPCore with CoreSight |
| Logic Elements | 320,000 |
| HPS Core Frequency | 1.5 GHz |
| User I/O | 384 |
| Process Technology | 20 nm |
| Core Voltage | 0.9 V |
| 패키지 | 1152-FBGA, FC (35x35 mm) |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40C to +100C (industrial, per Arria 10 SX F34 ordering code) |
| Transceivers | Up to 12.5 Gbps (per family datasheet) |
| Hard Memory Controller | DDR3/DDR4 (per Arria 10 SX family) |
| RoHS 상태 | Compliant (per Intel product page) |
| Lead Free | Yes |
| Configuration | SRAM-based, configuration via HPS or external |
10AS032H2F34E1HG 1152-fbga, fc (35x35 mm) 핀 구성 가이드
10AS032H2F34E1HG(1152-fbga, fc (35x35 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: 10AS032H2F34E1HG.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
10AS032H2F34E1HG 적합 용도: 6 애플리케이션s: High-Speed Industrial Imaging, Military Radar Signal Processing, Medical Imaging Backplanes, Test and Measurement Instrumentation, High-Bandwidth Protocol Bridging, Aerospace Flight Control Systems.
High-Speed Industrial Imaging
The 10AS032H2F34E1HG's 320K logic elements and dual-core ARM Cortex-A9 at 1.5 GHz make it ideal for industrial machine vision systems where FPGA-side hardware pipelines process high-resolution sensor data while the HPS runs Linux-based vision analytics. The 384 user I/Os interface directly with MIPI CSI-2, LVDS, and CoaXPress image sensors. Hardware-accelerated image processing achieves deterministic latency that software-only systems cannot match. Transceivers up to 12.5 Gbps enable direct interface to high-bandwidth sensors without external bridge chips, reducing BOM cost and PCB area in factory-floor vision deployments.
추천
Military Radar Signal Processing
The Arria 10 SX architecture combines hard IEEE 754 floating-point DSP blocks with a programmable HPS for radar front-end processing. The 10AS032H2F34E1HG's 12.5 Gbps transceivers stream digitized RF data into the FPGA fabric where DSP blocks perform pulse compression, MTI filtering, and FFT. The HPS subsystem handles tracker algorithms and display rendering under Linux. This partitioning achieves deterministic radar processing latency essential for phased-array beamforming and adaptive target tracking. The industrial temperature grade supports deployment in harsh environmental conditions.
추천
Medical Imaging Backplanes
Medical imaging systems such as CT, MRI, and ultrasound require the deterministic processing and high data throughput that the 10AS032H2F34E1HG provides. FPGA-side fabric performs real-time beamforming, image reconstruction, and noise reduction on raw sensor data, while the dual-core ARM Cortex-A9 manages patient interfaces and DICOM stack. PCIe Gen3 hard IP enables direct connection to host processors for image archival. The 20 nm process node provides the reliability required for medical IEC 62304 and ISO 13485 compliant designs. Hardware-accelerated processing reduces scan time and improves patient comfort.
추천
Test and Measurement Instrumentation
The 10AS032H2F34E1HG enables next-generation test equipment by combining high-speed analog front-end interfacing on the FPGA side with protocol-aware control software on the HPS. The 12.5 Gbps transceivers handle PCIe Gen3, 10GbE, and proprietary high-speed serial test interfaces. Programmable logic provides sub-nanosecond timing accuracy for stimulus generation and response capture, while the ARM cores manage display UI, USB host, and Ethernet interfaces. The 1152-FBGA package supports high pin-count mixed-signal designs required for oscilloscope and logic analyzer front ends.
추천
High-Bandwidth Protocol Bridging
The 10AS032H2F34E1HG serves as a multi-protocol bridge in telecom and networking equipment, converting between PCIe, 10GbE, CPRI, and custom serial interfaces. Hardened PCIe Gen3 and 10GbE MAC blocks minimize logic consumption, leaving FPGA fabric free for protocol adaptation logic. The ARM HPS runs the network stack and management interfaces. The industrial temperature grade supports deployment in central office and outdoor cabinet environments. Hardware offload reduces latency and CPU load compared to pure-software bridging solutions.
추천
Aerospace Flight Control Systems
Avionics systems benefit from the 10AS032H2F34E1HG's deterministic real-time processing combined with the flexibility of a programmable SoC. The FPGA fabric handles sensor fusion, actuator control loops, and ARINC 429/MIL-STD-1553 interfaces, while the HPS runs flight management software. Built-in ECC on memory and configuration logic supports fault-tolerant operation required for DO-254 design assurance. The industrial temperature grade and 20 nm process provide reliability for airborne and UAV applications. Redundant configuration via dual QSPI images enables fault recovery.
추천
추천 제품 요약
엔지니어링 참조 데이터: 10AS032H2F34E1HG — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | 10AS032H1F34E1HG | 10AS032H3F34E1HG | 10AS027H1F34E1HG | 10AS032H2F34E2HG | 10AS032H2F34I1HG |
|---|---|---|---|---|---|---|
| Package | 1152-FBGA F34 (35x35 mm) | 1152-FBGA F34 (35x35 mm) - same | 1152-FBGA F34 (35x35 mm) - same | 1152-FBGA F34 (35x35 mm) - same | 1152-FBGA F34 (35x35 mm) - same | 1152-FBGA F34 (35x35 mm) - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 320K | 320K | 320K | 270K (-15.6%) | 320K | 320K |
| Speed Grade | H2 | H1 (slower -1 grade) | H3 (faster +1 grade) | H1 | H2 | H2 |
| Temperature Grade | E1 (industrial) | E1 | E1 | E1 | E2 (extended) | I1 (industrial wider) |
| User I/O | 384 | 384 | 384 | 384 | 384 | 384 |
| HPS Core Frequency | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz |
| Process Technology | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm |
주요 차별점
- H2 speed grade vs H1 - 15% faster timing closure (vs 10AS032H1F34E1HG)
- 320K logic elements - same fabric, F34 pin-compatible (vs 10AS027H1F34E1HG)
- Dual ARM Cortex-A9 MPCore integrated HPS eliminates external processor (vs 10AS066K2F35I1HG)
설계 노트
Estimated: The 1152-FBGA F34 package has a typical theta_JA of approximately 12 C/W with appropriate thermal management (heat sink plus thermal interface material). At full utilization of the 320K logic elements and 1.5 GHz HPS, total power dissipation can reach 25-35 W. Design PCB stack-up with at least 2 oz copper on outer layers and dedicated thermal vias under the BGA to spread heat. For industrial-grade deployments, derate ambient temperature by 10 C above 70 C to maintain junction temperature within spec.
The 1152-FBGA package requires a high-density interconnect (HDI) PCB with micro-via stack-ups. Use at least 8 PCB layers with 1 oz copper for signal layers and 2 oz for power/ground planes. Maintain 50 ohm controlled impedance on high-speed serial traces and 100 ohm differential for LVDS pairs. Decouple all power rails with 0.1 uF, 1 uF, and 10 uF ceramic capacitors placed as close to the BGA as possible. Add bulk decoupling (47-100 uF) at the regulator output stages.
Critical sequencing: Power-on sequence must follow Intel's recommended order - core 0.9 V must ramp before HPS rails, and HPS rails must be stable before I/O banks. Failure to sequence properly can cause inrush currents and latch-up. Also, configure MSEL pins correctly for the desired configuration mode (AS, PS, JTAG). Boot from QSPI requires the flash to be programmed with a valid .pof bitstream and bootloader image for HPS-only boot mode.
12.5 Gbps transceiver channels require strict PCB routing rules: maximum 1 connector discontinuity per channel, 100 ohm differential impedance with 85 ohm common-mode for ACX coupling, length matching within 0.127 mm (5 mils) for TX and RX pairs within a channel. Use 4-PCB layer stack-up with buried stripline for long-haul channels. Reference Intel Transceiver Layout Guidelines for full routing requirements.
규정 준수 정보
RoHS and REACH compliance per Intel product page. Lead-free reflow compatible. Industrial-grade temperature (E1 suffix), not AEC-Q100 qualified - choose automotive variants for automotive applications. Conflict minerals compliance per Intel supplier program.
