10CX150YU484E5G - 150K LE Cyclone 10 GX FPGA | Intel | BGA-484
부품 번호: 10CX150YU484E5G ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $190.98 | $190.98 |
| 10 | $175.2 | $1,752.00 |
| 100 | $158.4 | $15,840.00 |
| 500 | $142.1 | $71,050.00 |
| 1,000 | $128.65 | $128,650.00 |
10CX150YU484E5G 개요
What is an FPGA? A Field-Programmable Gate Array is a reprogrammable semiconductor device whose logic fabric, routing, and I/O can be configured by the designer after manufacture. Within Intel's portfolio the Cyclone 10 GX sits below the high-end Stratix 10 line and above the Cyclone V / Cyclone 10 LP families, targeting applications that need integrated transceivers, moderate logic density, and 1.0 Gb/s-to-12.5 Gb/s serial links without the power envelope of a Stratix-class device. It is also a power-management IC sibling category: FPGAs are configured and powered by companion voltage regulators and supervisors such as the TPS7A4701 or LTM4644.
Key features of the 10CX150YU484E5G include 150K logic elements, 54,770 ALMs, 10.652 Mbit embedded RAM, 188 single-ended or 94 differential-pair user I/Os, and integrated 12.5 Gbps transceivers. The -E5 speed grade and 0.9 V core supply support industrial-temperature environments, while the U484 package (19 mm × 19 mm, 1.0 mm ball pitch) keeps PCB complexity and BOM cost manageable.
The 10CX150YU484E5G uses a hard-logic fabric with M20K SRAM blocks, variable-precision DSP slices, and PCIe Gen2 hard IP, all bonded through an Altera/Intel multi-gigabit transceiver (PMA + PCS) layer. Engineers target it for video bridging, machine-vision preprocessing, industrial control planes, and small-form-factor software-defined radio front ends where deterministic latency and tight power budgets coexist.
Typical applications include industrial machine vision (Basler/Arena interfaces), broadcast video processing (SMPTE 2022 / 2110 bridging), PCIe Gen2 endpoint cards, and low-density 10G Ethernet aggregation. The 484-ball package is well-suited to mid-complexity PCIe cards, FMC carrier designs, and SmartNIC reference platforms.
When designing with the 10CX150YU484E5G, pay attention to transceiver reference-clock jitter, M20K memory bandwidth, and decoupling for the 0.9 V core rail. Intel recommends a 6-layer PCB with continuous power planes and a Quartus Prime power analyzer run before sign-off.
This page synthesizes distributor pricing, drop-in Cyclone 10 GX equivalents, and Quartus Prime design-flow notes not found in the standalone manufacturer datasheet.
드롭인 대체품: 10CX150YU484E5G — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: 10CX150YU484E5G (동일 폼 팩터 및 풋프린트) — 차이점: Package, Embedded Memory, DSP Blocks, Operating Temperature, Mounting Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
10CX150YU484I5G
✅ 드롭인✓ 재고 있음
$176.2 / 개
데이터시트 보기 →10CX150YU484E6G
✅ 드롭인✓ 재고 있음
$124.55 / 개
데이터시트 보기 →10CX150YU484I6G
✅ 드롭인✓ 재고 있음
$151.9 / 개
데이터시트 보기 →10CX105YU484E5G
✅ 드롭인✓ 재고 있음
$275 / 개
데이터시트 보기 →10CX105YU484I5G
✅ 드롭인✓ 재고 있음
$954.5455 / 개
데이터시트 보기 →10CX085YU484E5G
✅ 드롭인✓ 재고 있음
$82.4 / 개
데이터시트 보기 →10CX150YU484E5G 최대 정격 & 전기적 특성
| Family | Cyclone 10 GX |
| Logic Elements | 150,000 LE |
| Adaptive Logic Modules (ALMs) | 54,770 ALM |
| Embedded Memory | 10.652 Mbit |
| User I/Os | 188 |
| 패키지 | 484-pin U484 BGA (UBGA / FCBGA), 19 mm x 19 mm, 1.0 mm pitch |
| Process Technology | 20 nm |
| Core Supply Voltage | 0.9 V |
| Speed Grade | -E5 |
| 동작 온도 | 0 C to +100 C |
| 실장 유형 | Surface Mount (SMD/SMT) |
| Transceivers | Integrated multi-gigabit transceivers (per family datasheet) |
| Hard Memory Controllers | Yes (DDR3/DDR4/LPDDR3) |
| DSP Blocks | Variable-precision DSP slices (per family datasheet) |
| RoHS 상태 | Compliant |
10CX150YU484E5G 484-pin u484 bga (ubga / fcbga), 19 mm x 19 mm, 1.0 mm pitch 핀 구성 가이드
10CX150YU484E5G(484-pin u484 bga (ubga / fcbga), 19 mm x 19 mm, 1.0 mm pitch 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: 10CX150YU484E5G.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
10CX150YU484E5G 적합 용도: 6 애플리케이션s: Industrial Machine Vision, Broadcast Video Bridging (SMPTE 2022/2110), PCIe Gen2 Endpoint Cards, Low-Density 10G Ethernet Aggregation, Software-Defined Radio Front End, Industrial Motor Control and Factory Automation.
Industrial Machine Vision
The 10CX150YU484E5G is well-suited to industrial machine-vision preprocessing stages that aggregate 1 to 4 CoaXPress or GigE Vision channels before handing data to a host CPU. Its 150K logic elements and 54,770 ALMs fit Bayer demosaic, color-matrix, and basic edge-detection pipelines, while the 10.652 Mbit embedded RAM buffers full-HD frames at 60 fps without external SRAM. Integrated 12.5 Gbps transceivers and hard PCIe Gen2 IP let the FPGA present itself as a frame-grabber endpoint, eliminating an external PHY. Designers place the FPGA on a 6-layer PCB with continuous ground planes and pair it with an LTM4644 quad-output DC/DC regulator for the 0.9 V core and 1.2 V/1.8 V transceiver rails.
추천
Broadcast Video Bridging (SMPTE 2022/2110)
The 10CX150YU484E5G bridges SDI or SMPTE 2110 IP video between broadcast islands, providing quad-link 3G-SDI ingest plus 10G Ethernet aggregation in a single device. The 188 user I/Os support multi-rate SDI deserializer LVDS pairs, and the 12.5 Gbps transceivers carry 10G Ethernet or SMPTE 2022-6 uncompressed video with deterministic latency. The 150K logic density is enough for dual-channel down-conversion, frame-sync, and PTP timestamping, while the U484 BGA keeps PCB real estate compact. Reference firmware is available in the Intel FPGA broadcast design example catalog, easing time-to-market for OB-van and studio-routing applications.
추천
PCIe Gen2 Endpoint Cards
Engineers use the 10CX150YU484E5G as a low-power endpoint on PCIe Gen2 x4 cards, offloading data-plane work such as compression, encryption, or protocol parsing from the host CPU. The integrated PCIe Gen2 hard IP block provides a verified controller and physical layer, and the 150K logic density fits custom DMA engines, NVMe-oF pre-processing, or SmartNIC offload pipelines. Its 0.9 V core and 20 nm process keep card power below 25 W, easing thermal envelopes in 1U/2U rack servers. Quartus Prime PCIe reference designs let engineers stand up a working endpoint in days rather than months.
추천
Low-Density 10G Ethernet Aggregation
The 10CX150YU484E5G aggregates 4 to 6 ports of 10 Gigabit Ethernet at line rate, acting as a top-of-rack or fan-out switch in compact edge devices. Its integrated transceivers drive SFP+ cages directly without external PHYs, and the 10.652 Mbit embedded RAM holds packet headers for ACL lookups at 10G line rate. The 150K logic elements fit lightweight L2/L3 forwarding plus basic telemetry, while the U484 BGA keeps BOM cost and PCB area manageable. Intel provides 10G MAC and Reed-Solomon IP cores for the Cyclone 10 GX family to accelerate evaluation.
추천
Software-Defined Radio Front End
The 10CX150YU484E5G suits software-defined radio (SDR) baseband preprocessing, where it digitizes IF signals from a wideband ADC and performs channelization, digital down-conversion, and pulse shaping in FPGA fabric. Its 12.5 Gbps transceivers accept JESD204B/C data from modern RF ADCs at sample rates up to several hundred megasamples per second, and the variable-precision DSP slices execute FIR and DDC operations at low power. The 150K logic and 10.652 Mbit memory support a 16-channel narrowband receiver in a single chip. Paired with the AD9680 ADC and an LTC2157 clock, the FPGA forms a complete multi-channel SDR front end.
추천
Industrial Motor Control and Factory Automation
The 10CX150YU484E5G drives multi-axis servo and stepper control loops in factory-automation controllers, where deterministic latency and protocol flexibility matter more than raw floating-point performance. Its 150K logic elements implement EtherCAT, PROFINET, or EtherNet/IP slave stacks with hard real-time response, while its PWM and encoder-counter IP supports simultaneous control of 8 to 16 axes. The integrated transceivers carry 100 Mbit industrial Ethernet without external PHYs. The 0 C to +100 C operating range and industrial-grade -I5 variant fit shop-floor cabinets, and the U484 BGA simplifies ruggedized PCB layout.
추천
추천 제품 요약
엔지니어링 참조 데이터: 10CX150YU484E5G — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | 10CX150YU484I5G | 10CX150YU484E6G | 10CX150YU484I6G | 10CX105YU484E5G | 10CX105YU484I5G | 10CX085YU484E5G |
|---|---|---|---|---|---|---|---|
| Package | 484-pin U484 BGA (UBGA) | 484-pin U484 BGA (same) | 484-pin U484 BGA (same) | 484-pin U484 BGA (same) | 484-pin U484 BGA (same) | 484-pin U484 BGA (same) | 484-pin U484 BGA (same) |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 150,000 LE | 150,000 LE (same) | 150,000 LE (same) | 150,000 LE (same) | 105,000 LE (-30%) | 105,000 LE (-30%) | 85,000 LE (-43%) |
| Speed Grade | -E5 | -I5 | -E6 (faster) | -I6 (faster) | -E5 (same) | -I5 | -E5 (same) |
| Operating Temperature | 0 C to +100 C (extended) | -40 C to +100 C (industrial) | 0 C to +100 C (extended) | -40 C to +100 C (industrial) | 0 C to +100 C (extended) | -40 C to +100 C (industrial) | 0 C to +100 C (extended) |
| User I/Os | 188 | 188 (same) | 188 (same) | 188 (same) | 188 (same) | 188 (same) | 188 (same) |
| Core Voltage | 0.9 V | 0.9 V (same) | 0.9 V (same) | 0.9 V (same) | 0.9 V (same) | 0.9 V (same) | 0.9 V (same) |
| Lifecycle Status | active | active | active | active | active | active | active |
주요 차별점
- Highest logic density in the U484 BGA package family (vs 10CX105YU484E5G)
- Extended-temperature grade (-E5) for industrial video bridges (vs 10CX150YU484I5G)
- Integrated 12.5 Gbps transceivers and PCIe Gen2 hard IP (vs 10CL120YU484C8G)
설계 노트
Estimated: based on the Intel Cyclone 10 GX family datasheet, a fully utilized 10CX150YU484E5G with active transceivers and 150K logic at typical toggle rates draws approximately 5 to 8 W from the 0.9 V core rail. Provide a 6-layer PCB with continuous power and ground planes, place 22 uF + 0.1 uF + 100 nF decoupling within 100 mils of every supply pin, and feed the core with an LTM4644 or TPS54331 quad-output DC/DC followed by a TPS7A4701 LDO for noise-sensitive transceiver analog domains. Verify with the Quartus Prime Early Power Estimator before PCB layout sign-off.
The U484 BGA at 1.0 mm pitch requires via-in-pad with filled-and-capped microvias for the inner rows and a 6-layer stackup with 0.5 oz copper on outer layers. Escape routing should leave at least 4 routing channels between BGA rows to break out differential pairs (LVDS, transceiver lanes, DDR). Maintain 100 ohm differential impedance on transceiver pairs and 50 ohm single-ended on high-speed GPIO, and route reference-clock traces with controlled impedance and length matching within 50 mils across all transceiver banks.
Three pitfalls to avoid: (1) mixing Cyclone 10 GX and Cyclone 10 LP U484 pinouts - although both packages share the U484 designation, the pin maps differ, so a board designed for the 10CX part will not work with a 10CL part and vice versa; (2) failing to apply the right MSL handling - the U484 BGA is moisture-sensitive (MSL3 typically) and must be baked before reflow; (3) omitting pull-ups on configuration pins such as nCONFIG, nSTATUS, and CONF_DONE, which can leave the device in an undefined state at power-up. Always cross-check the pin connection guidelines for the specific OPN before PCB fab.
규정 준수 정보
RoHS and REACH compliance stated by Intel product page. Not AEC-Q100 qualified (FPGAs are not automotive-qualified unless explicitly listed as such; the -E5 grade is industrial-extended, not automotive).
