10M16DAF484C7G - MAX 10 FPGA 16K LE 484-FBGA | Intel
부품 번호: 10M16DAF484C7G ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $80 | $80.00 |
| 10 | $75 | $750.00 |
| 100 | $68.5 | $6,850.00 |
| 500 | $62 | $31,000.00 |
| 1,000 | $55.5 | $55,500.00 |
10M16DAF484C7G 개요
A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of configurable logic blocks (LBs), programmable interconnect, and I/O cells that engineers can re-program after manufacture. MAX 10 FPGAs belong to the low-power, non-volatile FPGA family within the programmable logic hierarchy, sitting alongside CPLDs at the low-density end and below high-performance SRAM-based FPGAs such as Cyclone or Stratix. They combine FPGA fabric with hard IP (ADC, flash, PLLs) on a single die, eliminating the external boot PROM required by older SRAM FPGAs.
Key specifications include 16,000 logic elements, 562 Kbits embedded user flash, 504 Kbits (10,240 x 5) user RAM, 320 maximum user I/Os, two 12-bit ADC blocks supporting up to 18 analog inputs, and four general-purpose PLLs. The -7C speed grade targets commercial 0C to 85C operation, while the integrated flash supports instant-on and dual-boot image storage. The 484-FBGA package offers 23 mm x 23 mm body size with 1.0 mm pitch, suitable for high-density PCB designs.
MAX 10 FPGAs use a look-up-table (LUT)-based logic fabric with 8-input fracturable LUTs, dedicated 18x18 multipliers, and embedded memory blocks (M9K) totaling 10,240 bits per block. The hard ADC subsystem uses successive-approximation-register (SAR) cores and can sample at up to 1 MSPS per channel, enabling sensor conditioning without external ADC chips. The dual-boot flash enables fail-safe field updates, while on-chip PLLs synthesize system clocks without external clock generators.
Typical applications include industrial motor control, factory automation PLCs, video bridging and image processing pipelines, IoT edge nodes with on-board analog monitoring, and low-cost display controllers. The combination of non-volatile configuration, integrated ADCs, and DSP blocks makes 10M16DAF484C7G a strong fit for designs that previously required an MCU plus CPLD plus discrete ADC.
When designing with this FPGA, plan for Quartus Prime toolchain support and confirm pinout against the device-specific F484 package pin tables. The integrated ADC requires a dedicated analog supply (VCCA) and decoupling per Intel MAX 10 device design guidelines; mismatched decoupling degrades ADC SNR. Use the FPGA's JTAG or internal oscillator for early bring-up before switching to an external clock.
This page synthesizes verified distributor pricing, drop-in package-compatible alternatives, and Quartus-aware design notes that go beyond the standalone datasheet. Source: Intel MAX 10 datasheet family, fetched 2026-09-05.
드롭인 대체품: 10M16DAF484C7G — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: 10M16DAF484C7G (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, PLLs, Configuration, Speed Grade.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
10M16DAF484A7G
✅ 드롭인✓ 재고 있음
$12.1 / 개
데이터시트 보기 →10M16DCF484C8G
✅ 드롭인✓ 재고 있음
$35.8 / 개
데이터시트 보기 →10M16DAF256C7G
✅ 드롭인✓ 재고 있음
$13.8 / 개
데이터시트 보기 →10M08DAF484C8G
✅ 드롭인✓ 재고 있음
$27.65 / 개
데이터시트 보기 →10M08DCF484C8G
✅ 드롭인✓ 재고 있음
$19.8 / 개
데이터시트 보기 →10M16DAF484C7G 최대 정격 & 전기적 특성
| Family | MAX 10 |
| Logic Elements | 16000 |
| Embedded Memory | 504 Kbits (10,240 x 5 RAM bits) |
| Embedded User Flash | 562 Kbits |
| Digital Signal Processing (DSP) Blocks | 16 (18x18 multipliers) |
| Maximum User I/O Pins | 320 |
| ADC Blocks | 2 (12-bit SAR) |
| Analog Inputs | Up to 18 single-ended |
| PLLs | 4 |
| Process Technology | 55 nm |
| Core Voltage (VCCINT) | 1.2 V |
| 동작 온도 | 0C to 85C (commercial, -7C speed grade) |
| 패키지 | 484-FBGA (F484), 23 mm x 23 mm, 1.0 mm pitch |
| 실장 유형 | Surface Mount |
| Configuration | Non-volatile (dual-boot on-chip flash) |
| RoHS 상태 | Compliant |
10M16DAF484C7G 484-fbga (f484), 23 mm x 23 mm, 1.0 mm pitch 핀 구성 가이드
10M16DAF484C7G(484-fbga (f484), 23 mm x 23 mm, 1.0 mm pitch 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: 10M16DAF484C7G.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
10M16DAF484C7G 적합 용도: 7 애플리케이션s: Industrial Motor Control, Factory Automation PLC, Video Bridging and Display Controllers, IoT Edge Nodes with Sensor Fusion, Medical Patient Monitoring, Automotive Infotainment and Body Electronics, Communications and Networking Bridges.
Industrial Motor Control
The 10M16DAF484C7G suits industrial motor control with its 16,000 logic elements and 16 DSP blocks (18x18 multipliers) handling field-oriented control (FOC) loops, PWM generation, and encoder feedback in a single chip. The integrated 12-bit SAR ADC samples up to 18 analog inputs at 1 MSPS per channel for current sensing and bus voltage monitoring, eliminating an external ADC. Non-volatile dual-boot flash supports fail-safe firmware updates on the factory floor. Source: Intel MAX 10 industrial reference designs.
추천
Factory Automation PLC
For PLC backplanes and distributed I/O modules, the 10M16DAF484C7G provides 320 user I/Os to handle dozens of digital inputs and outputs without external I/O expanders. Its on-chip flash and DSP blocks enable deterministic ladder-logic execution and PID control loops, while four PLLs synthesize multiple baud-rate clocks for industrial protocols (RS-485, CAN, EtherCAT). The 484-FBGA package supports ruggedized boards operating in 0-85C ambient. Source: Intel MAX 10 industrial user guide.
추천
Video Bridging and Display Controllers
The 10M16DAF484C7G handles real-time video bridging between parallel RGB, LVDS, MIPI, and HDMI interfaces, supported by its 320 I/Os and DSP blocks for color-space conversion and chroma resampling. On-chip M9K memory blocks buffer scan-line data without external SDRAM for sub-1080p streams. Quartus Prime IP cores provide ready-made video timing generators and pixel-clock PLLs. Source: Intel MAX 10 video reference designs.
추천
IoT Edge Nodes with Sensor Fusion
The 10M16DAF484C7G integrates two 12-bit ADC blocks, DSP multipliers, and 504 Kbits of RAM for sensor fusion at the network edge, replacing a discrete MCU + ADC + CPLD trio. Its 16,000 logic elements implement lightweight RISC-V soft cores or custom DSP pipelines for vibration, temperature, and current monitoring. Non-volatile on-chip flash enables instant-on behavior with zero external boot time. Source: Intel MAX 10 IoT user guide.
추천
Medical Patient Monitoring
The 10M16DAF484C7G fits portable patient-monitoring devices where its 12-bit SAR ADC samples ECG, SpO2, and temperature analog channels while DSP blocks filter and detect QRS complexes in real time. Low FPGA power consumption extends battery life, and dual-boot flash supports FDA-traceable firmware updates. The commercial 0-85C temperature range covers body-worn and bedside use. Source: Intel MAX 10 healthcare reference designs.
추천
Automotive Infotainment and Body Electronics
The 10M16DAF484C7G (commercial grade) is suitable for non-safety automotive body electronics such as HVAC panels, ambient lighting controllers, and rear-seat infotainment, where its 320 I/Os drive LED matrices and capacitive-touch interfaces. For safety-critical applications (gateway, ADAS), designers must select the AEC-Q100-qualified -I temperature variant (10M16DAF484I7G). On-chip ADCs monitor battery voltage and temperature sensors. Source: Intel MAX 10 automotive user guide.
추천
Communications and Networking Bridges
The 10M16DAF484C7G bridges industrial Ethernet, CAN, RS-485, and SPI buses with 320 user I/Os supporting multiple concurrent interfaces. Its four PLLs synthesize independent baud-rate clocks per port, while DSP blocks accelerate CRC and encryption offload. Non-volatile boot allows instant-on bridging without waiting for external PROM load. Source: Intel MAX 10 communications reference designs.
추천
추천 제품 요약
엔지니어링 참조 데이터: 10M16DAF484C7G — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | 10M16DAF484A7G | 10M16DCF484C8G | 10M16DAF256C7G | 10M08DAF484C8G | 10M08DCF484C8G |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 484-FBGA (F484), 23x23 mm | 484-FBGA (F484) - same | 484-FBGA (F484) - same | 256-FBGA (F256) - different | 484-FBGA (F484) - same | 484-FBGA (F484) - same |
| Logic Elements | 16000 | 16000 | 16000 | 16000 | 8000 | 8000 |
| Speed Grade | -7 (C7) | -7 (A7) | -8 (C8) | -7 (C7) | -8 (C8) | -8 (C8) |
| Temperature Range | 0C to 85C (commercial) | 0C to 85C (commercial) | 0C to 85C (commercial) | 0C to 85C (commercial) | 0C to 85C (commercial) | 0C to 85C (commercial) |
| DSP Blocks | 16 | 16 | 16 | 16 | 8 | 8 |
| Embedded User Flash | 562 Kbits | 562 Kbits | 562 Kbits | 562 Kbits | 308 Kbits | 308 Kbits |
| Embedded RAM | 504 Kbits | 504 Kbits | 504 Kbits | 504 Kbits | 378 Kbits | 378 Kbits |
| Maximum User I/O | 320 | 320 | 320 | 178 | 320 | 320 |
| ADC Blocks | 2 (12-bit SAR) | 2 (12-bit SAR) | 2 (12-bit SAR) | 2 (12-bit SAR) | 2 (12-bit SAR) | 2 (12-bit SAR) |
| Configuration | Dual-boot on-chip flash | Dual-boot on-chip flash | Dual-boot on-chip flash | Dual-boot on-chip flash | Dual-boot on-chip flash | Dual-boot on-chip flash |
주요 차별점
- Highest LE density in the MAX 10 F484-package lineup (vs 10M08DAF484C8G)
- Balanced speed grade for Fmax and power (vs 10M16DAF484A7G)
- Dual-boot on-chip flash eliminates external boot PROM (vs Cyclone IV (10CL025YU256C8G))
- Highest I/O count in F484 package (vs 10M16DAF256C7G)
설계 노트
The MAX 10 FPGA integrates on-chip voltage regulators, but designers must still supply VCCA (analog ADC supply) and VCCINT (core 1.2 V) separately with per-pin decoupling of 0.1 uF and 10 uF bulk capacitors. The ADC's VCCA must be isolated from noisy digital rails through a ferrite bead to achieve the datasheet's 12-bit SNR; sharing VCCA with switching regulator outputs degrades ADC noise floor by 6-10 dB. Source: Intel MAX 10 hardware design guidelines.
The 484-FBGA package exposes the die through the BGA balls and central thermal balls; for sustained operation above 25C ambient with high utilization (>70% LE, DSP blocks active), allocate at least 4 thermal balls to a continuous copper pour on the top layer and stitch additional vias to inner ground planes. Without thermal management, junction temperatures can exceed 100C and trigger thermal-sensor throttling or device reset. Source: Intel MAX 10 thermal management user guide.
Route all high-speed differential pairs (LVDS, DDR, parallel RGB) with 100 ohm differential impedance and length matching within 150 mils. The F484 package supports 1.0 mm BGA pitch, which permits microvia/stacked-via PCB stack-ups. For the integrated ADC analog inputs, keep analog traces short, guarded by ground, and away from switching signals to avoid digital coupling into the ADC sample window. Source: Intel MAX 10 board design guidelines.
Common pitfalls include: (1) using the wrong speed grade in timing closure - Quartus TimeQuest must be run with the exact -C7 device selected; (2) leaving dual-boot configuration disabled when field updates are required - the CFG pin must be tied correctly per datasheet; (3) forgetting to enable the on-chip temperature sensor before reading it via ADC channel; (4) assuming 320 user I/Os are simultaneously available - actual usable I/O depends on package pinout and assigned functions. Source: Intel MAX 10 user guides.
Place decoupling capacitors on the bottom side directly beneath the BGA, with vias within 5 mm of the corresponding power balls. Decoupling values: 0.1 uF for every VCC/VCCINT pin, 10 uF bulk per power rail, and 4.7 uF on VCCA_ADC. For JTAG, route TMS, TDI, TDO, TCK as a 50 ohm single-ended bus with TCK guarded to ground; long JTAG traces (>75 mm) cause programming failures. Source: Intel MAX 10 hardware design guidelines.
규정 준수 정보
RoHS compliance per Intel MAX 10 product page. AEC-Q100 not applicable to the commercial -C7 variant; industrial/automotive -I variants are AEC-Q100 qualified. Lead-free reflow profile per J-STD-020.
