A3PE3000L-FG484M - 3M Gate Low-Power Flash FPGA | Microchip
부품 번호: A3PE3000L-FG484M ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $189 | $189.00 |
| 10 | $175.5 | $1,755.00 |
| 100 | $158 | $15,800.00 |
| 500 | $142 | $71,000.00 |
| 1,000 | $129 | $129,000.00 |
A3PE3000L-FG484M 개요
An FPGA (Field-Programmable Gate Array) is a semiconductor device that implements user-defined digital logic through a configurable fabric of logic blocks, routing resources, and I/O cells. The ProASIC3L family sits within Microchip's broader flash FPGA hierarchy, positioned above the ProASIC3E in power efficiency and below Fusion/M1 series in system integration. Unlike SRAM-based FPGAs, flash-based FPGAs are nonvolatile, live at power-up (Instant On), and require no external configuration ROM.
Key features include the Flash*Freeze technology, which drops static and dynamic power to microwatt levels while retaining state, a 1.2 V to 1.5 V core voltage, and a 130-nm, 7-layer metal (6 copper) flash-based CMOS process. Security is enhanced because the configuration bitstream is stored on-chip in flash, immune to readback attacks.
Architecturally, the device provides VersaTiles as its universal logic element, embedded block RAM organized as true dual-port SRAM, and banked I/O supporting multiple voltage standards. Performance reaches approximately 250 MHz system speeds, sufficient for glue logic, bus bridging, and control-plane functions.
Typical applications include industrial control, portable and battery-powered instrumentation, communications line cards, aerospace subsystems, and ASIC prototyping, where single-chip instant-on operation and low standby power matter.
Designers should budget power using the Microchip Libero SoC power calculator and watch I/O bank voltage assignments, since 484 balls share limited bank resources.
This page adds verified distributor pricing tiers, same-package drop-in alternatives, and practical design notes not found in the datasheet alone.
드롭인 대체품: A3PE3000L-FG484M — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: A3PE3000L-FG484M (동일 폼 팩터 및 풋프린트) — 차이점: Family, Package, Process Technology, System Gates, Configuration.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
A3PE3000L-FGG484M
✅ 드롭인✓ 재고 있음
$298 / 개
데이터시트 보기 →A3PE3000L-FG484I
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →A3PE3000L-1FG484M
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →A3PE3000L-FG484
✅ 드롭인✓ 재고 있음
$112 / 개
데이터시트 보기 →M1A3PE3000L-FGG484M
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
A3PE3000L-FG484M 최대 정격 & 전기적 특성
| Family | ProASIC3L (Flash-based FPGA) |
| System Gates | 3000000 (3.00E6) |
| Logic Elements (VersaTiles) | 75264 |
| True Dual-Port SRAM | 504 kbits |
| User I/O | 341 (up to 616 in larger packages) |
| Core Voltage | 1.2 V to 1.5 V |
| Process Technology | 130-nm, 7-layer metal (6 copper) flash-based CMOS |
| Logic Family | CMOS |
| Configuration Memory | Nonvolatile on-chip flash, live at power-up (Level 0) |
| Low-Power Feature | Flash*Freeze technology |
| 동작 온도 | 0 to 70 C |
| 공급 전압 | 1.5 V |
| Package Type | FBGA-484, 1 mm pitch, 23 x 23 mm |
| Pins / Balls | 484 |
| 실장 유형 | Surface Mount |
| Single-Chip Solution | Yes (no external configuration device required) |
A3PE3000L-FG484M fbga-484, 1 mm pitch, 23 x 23 mm 핀 구성 가이드
A3PE3000L-FG484M(fbga-484, 1 mm pitch, 23 x 23 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: A3PE3000L-FG484M.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
A3PE3000L-FG484M 적합 용도: 6 애플리케이션s: Portable Battery-Powered Instrumentation, Industrial Control and Automation, Communications Line Cards, Aerospace and Defense Subsystems, ASIC Prototyping and Low-Volume Production, Medical Device Control Electronics.
Portable Battery-Powered Instrumentation
The A3PE3000L-FG484M fits handheld and portable test equipment because the ProASIC3L family was specifically optimized for low static and dynamic power on top of the standard ProASIC3 fabric. With a core voltage down to 1.2 V, dynamic power scales directly with V squared, cutting switching energy roughly 36% versus a 1.5 V core. Flash*Freeze mode drops standby draw to microwatts while retaining register and SRAM state, so the instrument can duty-cycle between active measurement and idle without reconfiguration latency. Because configuration is nonvolatile flash, the device is live at power-up with no boot current spike, extending battery budget in systems that power-cycle frequently.
추천
Industrial Control and Automation
In industrial PLC I/O modules, motor control interfaces, and machine monitoring nodes, the A3PE3000L-FG484M provides 341 user I/Os with banked voltage support, letting one chip bridge legacy 5 V-tolerant signaling domains and modern 1.8 V/2.5 V/3.3 V logic. The 75264 VersaTiles implement deterministic state machines and safety interlocks without processor software latency, while 504 kbits of true dual-port SRAM buffer sensor histories and communication frames. The single-chip, nonvolatile design eliminates configuration devices that can fail in electrically noisy factory environments, improving MTBF. The industrial-temperature A3PE3000L-FG484I variant covers -40 to +100 C cabinet installations.
추천
Communications Line Cards
Networking and telecommunications line cards use the A3PE3000L-FG484M as control-plane glue logic, bus bridging, and status aggregation between physical-layer devices and backplane management. The 484-ball FBGA provides enough I/O to interface PHY chips, framers, and management MACs simultaneously, and VersaTile fabric reaches approximately 250 MHz system performance - adequate for clock-domain crossing, serializers of low-rate telemetry, and backplane handshaking rather than high-speed payload switching. Instant-on operation means the FPGA is available the moment power arrives, which simplifies hot-swap sequencing. Flash*Freeze mode also trims idle power in redundant, always-installed card slots.
추천
Aerospace and Defense Subsystems
The ProASIC3/EL architecture originated with Actel's military and aerospace heritage, and datasheet archives specifically document military ProASIC3L variants, making the A3PE3000L-FG484M a common choice for avionics control functions, satellite payload housekeeping, and secure ground equipment. Flash-based configuration is inherently resistant to bitstream readback, supporting design security requirements, and single-event susceptibility is mitigated versus SRAM configuration cells because the configuration is held in nonvolatile flash. Designers typically pair the device with triple-modular-redundancy coding in Libero and select screening/temperature variants as the program requires, using the same 484-ball footprint across qualification builds.
추천
ASIC Prototyping and Low-Volume Production
ASIC teams use the A3PE3000L-FG484M for RTL prototyping and bridge-to-production: its 3 million system gates and 504 kbits of dual-port SRAM accommodate mid-size SoC peripherals, controllers, and datapaths, while the ProASIC3E-generation flow means netlists port from ASIC synthesis with minimal retargeting. Because configuration is nonvolatile and secure, prototype boards can ship to customers without exposing the netlist, unlike SRAM FPGAs whose bitstreams can be copied from the boot PROM. In low-volume production where mask costs are unjustified, the same flash FPGA substitutes for the ASIC indefinitely, and the 484-ball footprint supports dense BGA-based prototype boards.
추천
Medical Device Control Electronics
Benchtop diagnostics, portable patient monitors, and lab automation instruments benefit from the A3PE3000L-FG484M's combination of deterministic logic, low idle power, and secure nonvolatile configuration. Patient-interface boards need many independently-banked I/Os - the 341 available user I/Os on FG484 drive sensor arrays, switches, and display interfaces without external glue logic. Flash*Freeze keeps standby power inside battery-operated monitor budgets between measurements, and the single-chip design avoids configuration components whose integrity matters in safety-related equipment. Firmware-in-FPGA updates are performed over JTAG or in-system, supporting field maintenance of regulated medical products with controlled design archives.
추천
추천 제품 요약
엔지니어링 참조 데이터: A3PE3000L-FG484M — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | A3PE3000L-FGG484M | A3PE3000L-FG484I | A3PE3000L-1FG484M | M1A3PE3000L-FGG484M |
|---|---|---|---|---|---|
| Package | FBGA-484, 1 mm pitch, 23 x 23 mm | FBGA-484 - same | FBGA-484 - same | FBGA-484 - same | FBGA-484 - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 3.00E6 | 3.00E6 | 3.00E6 | 3.00E6 | 3.00E6 |
| Flash*Freeze Technology | Yes | Yes | Yes | Yes | Yes |
| Core Voltage | 1.2 V to 1.5 V | 1.2 V to 1.5 V | 1.2 V to 1.5 V | 1.2 V to 1.5 V | 1.2 V to 1.5 V |
주요 차별점
- Micropower standby via Flash*Freeze (vs A3PE3000-1FGG484I (ProASIC3E standard family))
- Industrial temperature option in identical footprint (vs A3PE3000L-FG484I)
- Nonvolatile secure single-chip configuration (vs SRAM-based competitor FPGAs (e.g., Xilinx Spartan-class))
설계 노트
Estimate power before layout using the Microchip Libero SoC SmartPower tool, not hand arithmetic. Dynamic power scales with core voltage squared, so running the 1.2 V lower core rail instead of 1.5 V cuts switching power roughly 36% (1.2/1.5 = 0.8; 0.8 squared = 0.64). Budget for Flash*Freeze wake-up latency in duty-cycled systems - entry and exit take microseconds, which is negligible for most sensors but must be modeled for fast control loops. Provide independent, well-decoupled 1.2 V/1.5 V core, 2.5 V auxiliary, and I/O bank rails per the datasheet power-up requirements.
The 484-ball FBGA with 1 mm pitch requires via-in-pad or dog-bone fanout on roughly 0.8-1.0 mm via grids; plan an 8-layer stack with dedicated ground planes under the die area to control I/O return paths. Follow the datasheet power-ramp requirements - core should be stable per the specified sequencing or use the device's built-in support for any-rail-first power-up. Place 100 nF ceramic decoupling on every VCC/VCORE ball group and bulk capacitance near the regulators. JTAG programming balls should be routed to a header for in-system reprogramming with FlashPro.
Common pitfalls: (1) Migrating a design compiled for the -1 speed grade (A3PE3000L-1FG484M) onto this standard-grade part may fail timing - recompile and re-verify timing reports. (2) I/O bank voltage conflicts arise when 341 user I/Os are assigned across few banks; run Libero pin checking early. (3) The commercial 'M' part is rated 0 to 70 C only - specify the -I variant for extended temperature. (4) Do not rely on cross-brand FPGA substitution; flash FPGA pinouts are proprietary, so only same-family FG484 parts are true drop-ins.
규정 준수 정보
Verified web data does not state RoHS/REACH status for the M suffix variant; the FGG (green) packaging variants are typically the RoHS/lead-free options. Consult Microchip's environmental page for the exact compliance declaration before ordering for regulated markets.
