A54SX72A-2FGG484I - SX-A FPGA 72K Gates 484-FBGA | Microchip
부품 번호: A54SX72A-2FGG484I ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $168.5 | $168.50 |
| 10 | $151.65 | $1,516.50 |
| 100 | $138.2 | $13,820.00 |
| 500 | $124.4 | $62,200.00 |
| 1,000 | $112 | $112,000.00 |
A54SX72A-2FGG484I 개요
An antifuse FPGA is a field-programmable gate array whose interconnect programming elements are one-time-programmable antifuse cells rather than SRAM configuration memory. In the programmable-logic hierarchy (antifuse FPGA -> FPGA -> programmable logic device -> logic IC -> semiconductor), this gives the device inherent non-volatility, no external configuration PROM, instant-on behavior, and high resistance to configuration upset - key reasons antifuse FPGAs remain popular in military, aerospace, and industrial systems.
Key features of the -2FGG484I speed grade 2 device include the largest member of the SX-A family at 72K gates, 360 maximum user I/O, a 2.5V core supply (with supply range cited from 2.25V to 5.25V on I/O domains per distributor data), 0.25 um process technology, and industrial operating temperature range of -40C to +85C (TA). The G suffix in FGG484 denotes lead-free / RoHS-compliant ball metallization.
Architecturally, the SX-A family uses a sea-of-modules fabric with combinational and sequential logic modules, plus clock resources including CLKA, CLKB, and quadrant clock (QCLK) networks in the A54SX72A, enabling efficient global and regional clocking for synchronous designs. Because the programming layer is antifuse, designers get the timing determinism and security benefits of a fixed interconnect after programming.
Typical applications include glueless bus interface and bridge logic, industrial automation controllers, communications line cards, and defense/aerospace electronics where instant-on, configuration-security, and low single-chip system cost matter.
Design consideration: as a one-time-programmable device, the bitstream cannot be reloaded in-system - verify your design fully in simulation and use Microchip/LibreOffice-compatible Designer software timing sign-off before programming production units.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.
드롭인 대체품: A54SX72A-2FGG484I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: A54SX72A-2FGG484I (동일 폼 팩터 및 풋프린트) — 차이점: Package, RoHS Status, Operating Temperature, System Gates, Speed Grade.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
A54SX72A-1FGG484I
✅ 드롭인✓ 재고 있음
$225 / 개
데이터시트 보기 →A54SX72A-3FGG484I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
A54SX72A-2FG484I
✅ 드롭인✓ 재고 있음
$196 / 개
데이터시트 보기 →A54SX72A-FGG484I
✅ 드롭인✓ 재고 있음
$115 / 개
데이터시트 보기 →A54SX72A-1FG484I
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$208.5 / 개
데이터시트 보기 →A54SX72A-2FGG484I 최대 정격 & 전기적 특성
| Logic Family / Series | SX-A (A54SX72A) |
| System Gates | 72000 gates |
| Logic Cells / Modules | 4024 cells |
| Number of I/O | 360 I/O |
| Maximum System Frequency | 294 MHz |
| Process Technology | 0.25 um |
| Core Supply Voltage | 2.5 V |
| Supply Voltage Range | 2.25 V to 5.25 V |
| Programming Technology | Antifuse (one-time programmable) |
| Speed Grade | -2 |
| 동작 온도 | -40C to +85C (TA) |
| 패키지 / 케이스 | 484-BGA (FBGA) |
| Supplier Device Package | 484-FPBGA (27 x 27 mm) |
| Ball Pitch | 1 mm |
| 실장 유형 | Surface Mount |
| Lead Free Status | Lead free |
| RoHS 상태 | RoHS Compliant |
| Packaging | Tray |
A54SX72A-2FGG484I 484-fpbga (27 x 27 mm) 핀 구성 가이드
A54SX72A-2FGG484I(484-fpbga (27 x 27 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: A54SX72A-2FGG484I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
A54SX72A-2FGG484I 적합 용도: 6 애플리케이션s: Glue Logic and Bus Bridge Integration, Industrial Automation and Motor Control Sequencing, Aerospace and Defense Embedded Control, Communications Line Cards and Backplane Interfaces, Test and Measurement Instrument Control, Medical Device Control and Data Acquisition.
Glue Logic and Bus Bridge Integration
The A54SX72A-2FGG484I integrates multiple discrete glue-logic functions - address decoders, bus transceivers, wait-state generators, and interrupt controllers - into a single low-cost antifuse chip, which is exactly the system-level savings role Microchip promotes for SX-A devices. Its 360 user I/O and 5 V-tolerant I/O banks allow direct connection to legacy 5 V TTL and 3.3 V LVTTL buses without level shifters, and the 72K-gate fabric accommodates wide 32/64-bit bus bridges at up to 294 MHz-class internal performance. Because the antifuse interconnect is one-time programmed, bus timing is deterministic and cannot be corrupted by configuration loss at power-up. Place the device with short, matched-length traces to the processor bus and decouple each supply ball with 0.1 uF ceramics.
추천
Industrial Automation and Motor Control Sequencing
In factory automation controllers, the A54SX72A-2FGG484I provides deterministic finite-state-machine control, PWM generation, encoder interfaces, and safety-interlock logic with instant-on behavior - no configuration load time, so the machine is operational the moment power is applied. The industrial -40C to +85C temperature range matches cabinet-mounted electronics, and the antifuse fabric is immune to the configuration-bit flips that affect SRAM FPGAs in electrically noisy motor-drive environments. With 360 I/O, one device can consolidate stepper/pulse distribution, limit-switch debouncing, and fieldbus glue logic. Designers should route PWM outputs on short traces, use quadrant clock (QCLK) resources for regional timing domains, and budget 2.5 V core current per the SX-A datasheet power-estimation spreadsheet.
추천
Aerospace and Defense Embedded Control
Antifuse FPGAs are a long-standing choice in defense electronics because the programmed interconnect cannot be read back (design security) and contains no configuration memory to upset in radiation-prone environments. The A54SX72A-2FGG484I, the largest SX-A device at 72K gates, implements telemetry framing, command decoders, redundant-sensor voting, and backplane interfaces in a single 27 x 27 mm package. Its -40C to +85C industrial grade suits avionics line-replaceable units; flight and space programs should evaluate the related RT54SX72S radiation-tolerant variant instead. Designers should use CLKA/CLKB global clocks for system-synchronous domains per the Microchip quadrant-clock application notes, and lock pin assignments early since one-time-programmable devices cannot be reprogrammed after a pinout error.
추천
Communications Line Cards and Backplane Interfaces
Telecom and datacom line cards use the A54SX72A-2FGG484I for framing, TDM switching, and backplane protocol adaptation at line rates well within its 294 MHz system-speed capability. The 0.25 um antifuse fabric delivers fixed, predictable path timing - valuable when meeting backplane setup/hold budgets across many card slots - while 360 I/O supports wide parallel backplane buses. Instant-on operation lets a card participate in ring/fault-recovery protocols immediately at power insertion. Layout practice: keep the 2.5 V core plane solid, decouple every VCCA/VCCI ball pair, and use the FPGA's dedicated JTAG port (boundary scan) for production card test. Power dissipation should be estimated with the Microchip Designer power tool before card thermal design.
추천
Test and Measurement Instrument Control
Bench and automated test equipment benefit from the A54SX72A-2FGG484I's deterministic timing and instant-on readiness: the FPGA implements trigger state machines, counter/timer arrays, relay-control sequencers, and instrument bus (GPIB-style parallel) interfaces with cycle-accurate repeatability because the antifuse interconnect does not change between units. The 72K-gate capacity hosts multiple instrument subsystems in one 484-FBGA, and 360 I/O fans out to front-panel indicators, ADC/DAC control buses, and relay banks. Industrial temperature rating suits rack equipment environments. Because the device is one-time programmable, maintain strict design-revision control - each instrument firmware change consumes a new device. Use boundary-scan (JTAG) for board-level interconnect test during production.
추천
Medical Device Control and Data Acquisition
Medical diagnostic equipment - patient-monitoring front ends, laboratory analyzers, and imaging subsystem controllers - uses the A54SX72A-2FGG484I where deterministic, configuration-fault-immune logic is required near patient-connected circuitry. The antifuse fabric contains no configuration memory that could corrupt state during EMI-rich switching events, and instant-on operation ensures acquisition chains are armed at power-up. The 72K-gate fabric implements filter-control, sample-sequencing, and alarm state machines, while 5 V-tolerant I/O interfaces legacy analog front-end chips directly. Designers should isolate patient-side domains (e.g., with digital isolators), decouple all supply balls thoroughly, and note that design freeze discipline matters: any logic change requires a newly programmed device since the part is one-time programmable.
추천
추천 제품 요약
엔지니어링 참조 데이터: A54SX72A-2FGG484I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | A54SX72A-1FGG484I | A54SX72A-3FGG484I | A54SX72A-2FG484I | A54SX72A-FGG484I |
|---|---|---|---|---|---|
| Brand | Microchip Technology (Microsemi) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 484-FBGA (27 x 27 mm) | 484-FBGA - same footprint | 484-FBGA - same footprint | 484-FBGA - same footprint | 484-FBGA - same footprint |
| System Gates | 72,000 gates | 72,000 gates | 72,000 gates | 72,000 gates | 72,000 gates |
| Speed Grade | -2 | -1 (slower) | -3 (faster) | -2 (same) | Standard |
| User I/O | 360 | 360 | 360 | 360 | 360 |
| Core Supply Voltage | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| RoHS / Lead Free | RoHS compliant, lead free (GG) | RoHS compliant (GG) | RoHS compliant (GG) | Not RoHS (leaded balls) | RoHS compliant (GG) |
주요 차별점
- Balanced mid speed grade with lowest cost-per-timing-risk (vs A54SX72A-1FGG484I)
- RoHS-compliant lead-free balls (vs A54SX72A-2FG484I)
- Cost optimization headroom within same footprint (vs A54SX72A-3FGG484I)
- Largest SX-A device: 72K gates and 360 I/O (vs A54SX32A family parts)
설계 노트
Supply the A54SX72A-2FGG484I from a regulated 2.5 V core rail (distributor data cites a 2.25 V to 5.25 V supply domain range). SX-A I/O banks are 5 V tolerant, so direct 5 V TTL interfaces are possible without level translators - a key advantage over SRAM FPGAs. Decouple every supply ball pair with 0.1 uF ceramic capacitors placed within 2 mm of the ball via, plus bulk 10 uF to 47 uF per rail quadrant. Follow the SX-A datasheet power-up ramp-rate guidance and estimate dissipation with Microchip Designer's power calculator before finalizing the board thermal design.
This device is one-time programmable: an antifuse FPGA cannot be erased or reprogrammed, so any logic change consumes a new physical device. Complete post-layout simulation and static timing analysis in Microchip Designer software, and verify the fuse-file checksum, before sending the design to Silicon Sculptor programming. Freeze I/O assignments early because a ball-map error discovered after programming means a respun board plus new devices. Maintain design-revision traceability so production devices are always programmed with the exact validated fuse file.
Use the A54SX72A clock resources deliberately: CLKA and CLKB global clocks serve chip-wide synchronous domains, while the quadrant clock (QCLK) network - documented in Microchip's A54SX72A/RT54SX72S quadrant-clock application notes - handles regional timing, reducing global-clock loading and skew. For wide parallel buses on the 484-FBGA, keep trace-length mismatch within the setup/hold budget derived from the -2 speed grade timing report, and reference high-toggle-rate outputs to a solid ground plane to limit simultaneous-switching noise with 360 available I/O.
The 484-FPBGA (27 x 27 mm, 1.0 mm ball pitch) footprint requires a defined solder-mask opening per the SX-A datasheet mechanical drawing; use the manufacturer-recommended pad geometry rather than a generic 484-BGA pattern. The I suffix confirms -40C to +85C operation, but BGA solder-joint reliability at temperature extremes still depends on correct reflow profile and PCB CTE matching. Provide JTAG access on test points for boundary-scan production test, and keep probe access to supply balls for bring-up voltage verification before programming.
규정 준수 정보
Distributor listings (Infinity Semiconductor, Kynix, DigiKey) report Lead free / RoHS Compliant for the FGG484 package. REACH, halogen-free, and conflict-minerals status not stated in provided data.