AFS600-1FGG484 - 600K Gate Mixed-Signal FPGA | Microchip
부품 번호: AFS600-1FGG484 ✓ 활성AFS600-1FGG484 개요
A mixed-signal FPGA is an FPGA that integrates digital programmable logic with configurable analog and mixed-signal blocks. In the product hierarchy, it belongs to programmable logic devices, then FPGAs, then programmable logic and semiconductors. Unlike a fixed-function application-specific integrated circuit, an AFS600 device allows designers to implement logic, control, interface, and analog functions in one reconfigurable device, shortening development cycles and reducing discrete component count.
The device provides 172 I/O and 600,000 equivalent system gates in a surface-mount 484-BGA package. Its listed 1.5 V operating supply and 130 nm flash-based CMOS process make it suitable for compact embedded control systems that benefit from nonvolatile configuration. The AFS600 family also provides comprehensive clock-generation and management resources, configurable analog blocks, and large flash-memory blocks according to the manufacturer product page.
Implementation uses flash-backed programmable logic rather than SRAM-only configuration. This architectural distinction means the programmed configuration can remain available without continuous external configuration-memory support. The AFS600-1FGG484 is appropriate when a design needs both conventional FPGA logic and mixed-signal functions, particularly in industrial, communications, embedded control, and test equipment.
Typical uses include signal conditioning, industrial interface conversion, communications control, embedded instrumentation, programmable logic subsystems, and mixed-signal acquisition. The 172 available I/O provide substantial board-level connectivity, while the 600K-gate density permits multiple digital subsystems and state machines to be consolidated within one package.
PCB design should prioritize short, continuous supply and ground connections because the 484-BGA package has a fine ball pitch. Designers must follow the manufacturer footprint, layer-stack, decoupling, and thermal recommendations, and they should validate signal integrity and power sequencing on the target stack-up before production release.
This page consolidates verified distributor specifications, package details, pricing, lifecycle information, and candidate drop-in references. It also distinguishes verified facts from unavailable details and provides practical guidance for evaluating the AFS600-1FGG484 against related Fusion FPGA configurations.
드롭인 대체품: AFS600-1FGG484 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: AFS600-1FGG484 (동일 폼 팩터 및 풋프린트) — 차이점: Package, System Gates, Family, Configuration Memory, Process Technology.
M7AFS600-2FGG484
✅ 드롭인가격 문의
데이터시트 보기 →AFS600-FFGG484
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
M1AFS600-1FGG484K
✅ 드롭인가격 문의
데이터시트 보기 →M7AFS600-1FGG484
✅ 드롭인가격 문의
데이터시트 보기 →M7AFS600-1FG484I
✅ 드롭인가격 문의
데이터시트 보기 →AFS600-1FGG484 최대 정격 & 전기적 특성
| Device Type | Fusion mixed-signal field-programmable gate array (FPGA) |
| System Gates | 600,000 gates |
| Number of I/O | 172 I/O |
| 패키지 | 484-BGA |
| 실장 유형 | SMD/SMT |
| 공급 전압 | 1.5 V |
| Process Technology | 130 nm flash-based CMOS |
| Logic Family | CMOS |
| Programmable Logic Type | Flash-based FPGA |
| 최대 클록 주파수 | 1282.05 MHz |
| 동작 온도 | 0 C to 85 C |
| Tested Junction Temperature | 100 C |
| Metal Layers | 7 layers |
| Product Series | AFS600 Fusion Family |
| Minimum Order Quantity | 60 units |
| Packaging | Tray |
| Lead Time | 12 weeks |
| 수명 주기 상태 | Active |
| RoHS 상태 | ROHS3 compliant |
| Programmable Analog | Integrated configurable analog blocks |
| Configuration Memory | Large flash-memory blocks |
| Clock Management | Comprehensive clock generation and management circuitry |
AFS600-1FGG484 484-bga 핀 구성 가이드
AFS600-1FGG484(484-bga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: AFS600-1FGG484.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
AFS600-1FGG484 적합 용도: 6 애플리케이션s: Industrial Control and Automation, Programmable Signal Conditioning, Communications Interface Consolidation, Embedded Instrumentation, Test and Measurement Equipment, Embedded System Control.
Industrial Control and Automation
The AFS600-1FGG484 fits industrial controllers that need programmable digital logic, extensive board connectivity, and configurable analog functions in one package. Its 600,000 system gates can support multiple state machines, communication interfaces, and supervisory logic, while 172 I/O provide connections to sensors, actuators, and discrete controllers. The device operates from a 1.5 V supply and is listed for 0 C to 85 C, so it is appropriate for indoor industrial equipment that stays within that range. The flash-backed 130 nm CMOS implementation also supports nonvolatile configuration, simplifying field updates without a separate configuration-memory device. Final qualification must still address industrial EMC, surge, and environmental requirements.
추천
Programmable Signal Conditioning
The AFS600-1FGG484 is suitable for programmable analog and signal-conditioning front ends because the AFS600 family combines configurable analog blocks with flash-based programmable logic. Its 600,000 system gates can implement calibration tables, filtering control, acquisition sequencing, and digital correction, while 172 I/O connect control logic to external sensors and converters. Operating from 1.5 V supports compact mixed-signal designs, and the listed 0 C to 85 C range covers commercial equipment. Engineers should verify individual analog-block ranges, sampling behavior, and timing margin from the manufacturer documentation before defining the signal path.
추천
Communications Interface Consolidation
The AFS600-1FGG484 can consolidate protocol conversion, framing, buffering, and supervisory logic in communications interface equipment. The 600,000 system gates offer enough logic density for multiple parallel interface blocks, while 172 I/O reduce the number of discrete bridge devices required on a board. Its 1.5 V operating supply and flash-based configuration support compact, repeatable equipment designs, and the 484-BGA package accommodates a high ball count despite its modest 0 C to 85 C commercial temperature specification. Signal-rate and I/O-standard support must be checked against the exact datasheet because those details were not included in the verified excerpts.
추천
Embedded Instrumentation
The AFS600-1FGG484 is appropriate for embedded instrumentation requiring programmable measurement control, local decision logic, and a high number of external connections. Its 172 I/O can link sensors, status indicators, memory, and communication blocks, while 600,000 system gates provide capacity for acquisition sequencing, calibration, and data processing. The configurable mixed-signal architecture can reduce the component count compared with separate FPGA, analog, and control ICs. With a 1.5 V supply and listed 0 C to 85 C operation, the device targets commercial or controlled industrial instruments. Calibration, input-range, and accuracy requirements should be verified independently of the digital logic selection.
추천
Test and Measurement Equipment
The AFS600-1FGG484 can implement programmable test sequences, pattern generation, timing control, and data acquisition within a compact instrument. Its 600,000 system gates and 172 I/O support parallel channels and control logic, while the family's configurable analog resources broaden the device's utility for mixed-signal test systems. The 484-BGA package keeps interconnect density manageable on multilayer boards, and the 1.5 V supply supports low-voltage mixed-signal designs. The verified operating range is 0 C to 85 C, making the part appropriate for laboratory equipment. Instrumentation accuracy, clock tolerance, and analog performance must be established through the manufacturer's device documentation.
추천
Embedded System Control
The AFS600-1FGG484 is suitable as the central programmable controller in an embedded system combining sequential logic, peripheral management, and mixed-signal functions. Its 172 I/O permit direct integration of memories, communications devices, displays, and actuators, while 600,000 system gates allow multiple control blocks to share one FPGA. Flash-backed configuration supports deterministic startup from stored logic, and the 1.5 V operating supply fits modern compact systems. Designers should account for the 484-BGA footprint's assembly and inspection requirements and keep power and ground distribution within manufacturer layout guidance. The listed 0 C to 85 C range should be checked against the enclosure's internal temperature.
추천
추천 제품 요약
엔지니어링 참조 데이터: AFS600-1FGG484 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AFS600-2FGG484 | AFS600-FFGG484 | AFS600-1FGG484K | M7AFS600-1FGG484 | AFS600-1FG484I |
|---|---|---|---|---|---|---|
| Package | 484-BGA | 484-BGA - same | 484-BGA - same | 484-BGA - same | 484-BGA - same | 484-BGA - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Programmable Technology | 130 nm flash-based CMOS | 130 nm flash-based CMOS | 130 nm flash-based CMOS | 130 nm flash-based CMOS | 130 nm flash-based CMOS | 130 nm flash-based CMOS |
주요 차별점
- Dense mixed-signal integration (vs AFS600-2FGG484)
- Nonvolatile flash-backed programmable logic (vs AFS600-FFGG484)
- Clear processor-versus-plain-FPGA choice (vs M7AFS600-1FGG484)
설계 노트
Treat the 484-BGA land pattern and ball map as a controlled manufacturing artifact. Confirm the PCB library against the current Microchip package drawing, including ball pitch, pad diameter, solder-mask definition, and component orientation. Place decoupling capacitors close to the relevant power balls and provide uninterrupted power and ground planes over the device area. Do not infer unverified ball assignments from distributor snippets.
The listed operating supply is 1.5 V, but designing the rail requires the device-specific recommended input range, tolerance, current limit, and sequencing information from the manufacturer datasheet. Use the shortest practical path between the regulator output and the FPGA power balls, maintain low-impedance ground returns, and decouple each supply group according to the official layout guidance. Because exact current consumption was not included in the verified excerpts, it is not estimated here.
The 484-BGA footprint requires careful escape-routing and layer-transition planning. Follow the manufacturer's recommended via-in-pad or via-adjacent patterns, maintain return paths for high-speed signals, and avoid long stubs between the FPGA and external clock or interface components. Review the complete clock-generation and management architecture before assigning pins so that clock inputs, configuration signals, and user I/O are connected according to the exact GG484 pin table.
Do not assume that every AFS600 484-ball ordering code is electrically and thermally interchangeable. The -1, -2, FF, K, and I suffixes can distinguish speed, qualification, or temperature characteristics, while M7AFS600 adds an Arm CoreMP7 processor. Before substitution, compare the manufacturer ordering guide, electrical limits, temperature grade, configuration scheme, pin assignments, and timing constraints. The same package outline alone does not establish functional drop-in compatibility.
규정 준수 정보
The verified distributor record identifies AFS600-1FGG484 as ROHS3 compliant. No verified REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was supplied.
