Texas Instruments

DS90LV047ATMTC - 400 Mbps LVDS Quad Driver | Texas Instruments

부품 번호: DS90LV047ATMTC ✓ 활성
3.3 V Vdss 16-pin TSSOP (PW) Package
MOQ: 1 |

DS90LV047ATMTC 개요

The Texas Instruments DS90LV047ATMTC is a 3.3 V, 400 Mbps quad differential line driver that converts four CMOS, LVTTL, or TTL inputs into four LVDS differential outputs in a 16-pin TSSOP (PW) package. It provides four differential drivers and no receivers, operates across a -40 °C to 85 °C temperature range, and supports the data rates required by high-speed parallel-to-serial links.

An LVDS differential line driver is an interface IC that converts single-ended digital signals into low-voltage differential pairs. Low Voltage Differential Signaling belongs to the interface IC category and uses the voltage difference between two conductors to carry data while rejecting common-mode noise. By placing four LVDS outputs in one package, the DS90LV047A family reduces component count and simplifies control of parallel data buses, clock distribution, and multi-channel point-to-point interconnects.

The principal characteristics are a 400 Mbps signaling rate, four independent differential outputs, a 3.3 V supply, and CMOS-compatible inputs. Each driver supports low-power operation and fast data-rate transmission for point-to-point links. The 16-pin TSSOP package provides a compact surface-mount footprint suitable for communications equipment, industrial controls, test equipment, and multi-channel digital backplanes.

The device uses differential signaling to maintain signal integrity over cables or controlled-impedance PCB traces. Because the receiver detects the voltage difference across the pair rather than an absolute voltage at one conductor, common-mode disturbances caused by nearby switching circuitry are substantially rejected. Four channels can transmit related control, data, or clock signals while keeping channel-to-channel skew and power distribution under centralized design control.

Typical uses include parallel-to-serial data transmission, clock distribution, backplane links, video and imaging interfaces, industrial automation equipment, and test-and-measurement systems. The quad architecture is particularly useful when four independent high-speed channels must share the same supply, ground, and board area. The device is designed to work with the companion DS90LV048A family of quad LVDS receivers when a system requires balanced transmission and reception.

PCB implementation should use controlled-impedance differential routing, symmetric pair geometry, and a continuous ground reference beneath the signal traces. Keep the LVDS outputs away from high-current switching paths, and terminate the receiving end according to the receiver manufacturer's recommendations. Verify the final eye pattern, skew, and common-mode behavior at the system level because connector and cable effects can materially limit a 400 Mbps link.

This page consolidates manufacturer product information, ordering details, cross-reference candidates, and practical interface-design guidance. It also identifies the distinctions between the available ordering codes so engineers can select a functionally equivalent part without overlooking packing, marking, or temperature-range differences.

드롭인 대체품: DS90LV047ATMTC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: DS90LV047ATMTC (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature Range, Package.

Texas Instruments
Operating Temperature Range: -40 C to +85 C
Package: 16-TSSOP (4.40 mm body width)

DS90LV047ATMTC/NOPB

✅ 드롭인
Texas Instruments
📦 TSSOP-16 (PW)
LVDS Quad Differential Line Driver · 4 / 0 · 400 Mbps (200 MHz toggle) · LVDS (TIA/EIA-644) · 3.0 V to 3.6 V · 3.3 V · LVTTL / CMOS / TTL · 350 mV across 100 ohm load

가격 문의

데이터시트 보기 →

DS90LV047ATMTCX/NOPB

✅ 드롭인
📦 TSSOP-16 (PW)
Same DS90LV047A electrical configuration, 400 Mbps rate, 3.3 V supply, and 16-pin TSSOP footprint; distinct X/NOPB ordering designation

📋 참조 대체품 (카탈로그에 없음)

DS90LV047ATM/NOPB

✅ 드롭인
📦 TSSOP-16 (PW)
Same DS90LV047A quad LVDS driver family, 400 Mbps rate, 3.3 V supply, and 16-pin TSSOP footprint; ordering designation omits the additional C character

📋 참조 대체품 (카탈로그에 없음)

DS90LV047ATMTC/DRPB

✅ 드롭인
📦 TSSOP-16 (PW)
Same 4/0 LVDS driver configuration and 16-pin TSSOP package; DRPB ordering designation instead of the base MPN

📋 참조 대체품 (카탈로그에 없음)

PI90LV047ALE

✅ 드롭인
📦 TSSOP-16
Cross-brand 16-pin, 3.3 V, 400 Mbps quad LVDS driver; cross-reference reports matching terminals and package, with timing and output-swing details requiring verification

📋 참조 대체품 (카탈로그에 없음)

DS90LV047ATMTC 사양

Device Type 4/0 LVDS differential line driver
Number of Differential Drivers 4
Maximum Signaling Rate 400 Mbps
Nominal Supply Voltage 3.3 V
Input Signal Compatibility CMOS, LVTTL, TTL
Output Signal Type LVDS differential
LVDS Output Voltage 0.45 V
패키지 16-pin TSSOP (PW)
실장 유형 Surface mount
동작 온도 범위 -40 °C to 85 °C

DS90LV047ATMTC 16-pin tssop (pw) 핀 구성 가이드

DS90LV047ATMTC(16-pin tssop (pw) 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

DS90LV047ATMTC의 16-pin tssop (pw) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: DS90LV047ATMTC.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

DS90LV047ATMTC 적합 용도: 6 애플리케이션s: High-Speed Parallel-to-Serial Data Transmission, Multi-Channel Clock Distribution, Industrial Automation and Control Links, Test and Measurement Instrumentation, Backplane and Board-to-Board Interconnects, Imaging and Video Interface Modules.

🌐

High-Speed Parallel-to-Serial Data Transmission

The DS90LV047ATMTC fits four-channel parallel-to-serial links that require LVDS outputs at rates up to 400 Mbps. Each of the four drivers accepts a CMOS, LVTTL, or TTL signal and converts it into a low-voltage differential pair. This allows a controller or FPGA to drive four related channels over controlled-impedance board traces or balanced cables. The 3.3 V supply and 16-pin TSSOP package limit board area, while differential signaling improves noise immunity in systems with nearby switching circuitry.

🖥️

Multi-Channel Clock Distribution

The four differential outputs of the DS90LV047ATMTC can distribute related or independent clock signals across a cabinet, backplane, or instrumented test system. Operating at a 3.3 V supply and supporting signaling rates up to 400 Mbps provides headroom for low-jitter digital clock links. A common package also keeps channel-to-channel placement consistent, making return-path and pair-length management easier. Validate receiver input capacitance and clock fanout before assigning all four channels.

🏭

Industrial Automation and Control Links

The DS90LV047ATMTC is suitable for factory equipment that transfers control, position, or diagnostic data between controller cards and remote modules. Four 400 Mbps-capable LVDS drivers provide a compact interface for parallel buses, while differential pairs reduce susceptibility to common-mode noise found in industrial environments. The -40 °C to 85 °C rated part supports a broad range of industrial temperature conditions. Use controlled-impedance routing and keep switching-power paths separated from the LVDS outputs.

🔧

Test and Measurement Instrumentation

The DS90LV047ATMTC can drive four differential channels in automated test equipment, signal-conditioning modules, and acquisition backplanes. Its 400 Mbps signaling capability supports high-rate digital stimulus while the compact 16-pin TSSOP package simplifies board-level integration. The transmitter-only architecture leaves receiver selection flexible, allowing it to pair with the DS90LV048A family or another compatible LVDS receiver. Confirm eye margin, jitter budget, and termination values at the intended cable length.

🔌

Backplane and Board-to-Board Interconnects

Four LVDS outputs allow the DS90LV047ATMTC to serve as a compact transmitter on a backplane or inter-board interface. At rates up to 400 Mbps, the device can carry multiple low-latency data lanes while differential signaling improves noise immunity over short board-to-board connections. A 16-pin TSSOP package supports dense placement, but high-speed performance depends on stack-up impedance, via geometry, connector transitions, and return-path continuity. Model the complete channel rather than only the driver output.

📺

Imaging and Video Interface Modules

The DS90LV047ATMTC can provide four low-voltage differential outputs for parallel imaging data, synchronization signals, or video timing distribution. The 400 Mbps capability accommodates several high-speed digital functions while the 3.3 V operation integrates cleanly with modern CMOS logic. Because LVDS performance is sensitive to trace geometry and crosstalk, maintain symmetric pair spacing, avoid stubs, and provide a continuous reference plane. Verify the source and receiver timing specifications against the actual pixel or frame-rate requirement.

추천 제품 요약

DS90LV048ATMTC/NOPB Complementary four-channel LVDS receiver for a balanced link 사용처: High-Speed Parallel-to-Serial Data Transmission, Multi-Channel Clock Distribution, Industrial Automation and Control Links, Test and Measurement Instrumentation, Backplane and Board-to-Board Interconnects, Imaging and Video Interface Modules DS90LV047ATMTC/NOPB Texas Instruments 사용처: High-Speed Parallel-to-Serial Data Transmission, Imaging and Video Interface Modules DS90LV047ATMTCX/NOPB Alternative same-family driver ordering option 사용처: Multi-Channel Clock Distribution DS90LV047ATM/NOPB Same-family driver option for industrial control links 사용처: Industrial Automation and Control Links DS90LV047ATMTC/DRPB Same-family driver ordering option 사용처: Test and Measurement Instrumentation PI90LV047ALE Cross-manufacturer quad LVDS driver candidate 사용처: Backplane and Board-to-Board Interconnects
What is the DS90LV047ATMTC?
The DS90LV047ATMTC is a four-channel LVDS differential line driver from Texas Instruments. According to the manufacturer's DS90LV047A product information, it converts four CMOS, LVTTL, or TTL inputs into four LVDS outputs, supports signaling rates up to 400 Mbps, operates from a 3.3 V supply, and is packaged in a 16-pin TSSOP. It contains four drivers and no receivers.
Where can I download the DS90LV047ATMTC datasheet PDF?
The manufacturer datasheet is available from the Texas Instruments DS90LV047A product documentation. It is the authoritative source for the DS90LV047ATMTC pin configuration, recommended application circuit, electrical characteristics, and timing parameters. Use the DS90LV047A datasheet PDF linked from the Texas Instruments product page and confirm that the selected ordering option matches the 16-pin TSSOP (PW) package.
Where can I find the DS90LV047ATMTC pinout?
The DS90LV047ATMTC pinout is shown in the pin-configuration diagram within the Texas Instruments DS90LV047A manufacturer datasheet. The device uses a 16-pin TSSOP (PW) package and provides four differential driver channels. Assign PCB nets from the datasheet pin table rather than from a distributor page, especially when distinguishing input data pins, LVDS output pairs, supply connections, and ground pins.
How many LVDS outputs does the DS90LV047ATMTC provide?
The DS90LV047ATMTC provides four independent LVDS differential outputs and has no integrated receivers. Texas Instruments describes the part as a 4/0 quad differential line driver. The four outputs can carry related data channels, independent control signals, or clock signals, with a maximum signaling rate of 400 Mbps as specified in the DS90LV047A product information.
What is the maximum data rate of DS90LV047ATMTC?
The DS90LV047ATMTC supports signaling rates up to 400 Mbps. The Texas Instruments DS90LV047A product page identifies the device as a 400-Mbps LVDS quad high-speed differential driver. Actual usable link margin depends on clock quality, input-output timing, PCB impedance, cable length, connector geometry, and receiver performance, so system-level eye-pattern testing remains necessary.
Is DS90LV047ATMTC pin compatible with DS90LV047ATMTC/NOPB?
The DS90LV047ATMTC and DS90LV047ATMTC/NOPB share the same DS90LV047A device family, 4/0 driver configuration, 400 Mbps signaling rate, and 16-pin TSSOP (PW) package. Texas Instruments treats the NOPB designation as an ordering option for the corresponding part. Verify the specific device marking and ordering details against the manufacturer datasheet before reusing an existing assembly in production.
What can replace the DS90LV047ATMTC LVDS driver?
The DS90LV047ATMTC can generally be replaced by the closely related DS90LV047A ordering variants in the same 16-pin TSSOP format, or by a cross-manufacturer quad LVDS driver only after pin, voltage, timing, and output-amplitude checks. Cross-reference data identifies the Pericom PI90LV047ALE as a functionally comparable 16-pin, 3.3 V, 400 Mbps TSSOP candidate. PCB compatibility still requires comparison of the exact pin map and signal-integrity parameters.
Is PI90LV047ALE a drop-in replacement for DS90LV047ATMTC?
The PI90LV047ALE is a cross-manufacturer quad LVDS line-driver candidate listed as a complete replacement with matching terminals and package in cross-reference results. It is identified as a 16-pin, 3.3 V, 400 Mbps device in the same TSSOP format. Production substitution should still confirm the pin map, input thresholds, propagation delay, output swing, supply-current limit, and receiver compatibility.
What is the difference between DS90LV047ATMTC and DS90LV048ATMTC/NOPB?
The DS90LV047ATMTC is a transmit-only quad LVDS driver, while the DS90LV048ATMTC/NOPB is a receive-only quad LVDS receiver. Both belong to the same 3.3 V, 16-pin TSSOP interface family, but their signal directions are opposite. They are often paired in a link, so the DS90LV048 part is a companion choice rather than a functional substitute for the DS90LV047A driver.
When should I choose DS90LV047ATMTC over a cross-brand LVDS driver?
Choose the DS90LV047ATMTC when a design prefers a single-manufacturer interface path, established 400 Mbps operation, and direct access to the Texas Instruments DS90LV047A documentation and related ordering options. Consider a cross-brand candidate when sourcing continuity, lifecycle, or commercial factors favor a second source. A valid substitution must match the 16-pin TSSOP footprint, 3.3 V supply, LVDS output characteristics, timing, and channel arrangement.
Where can I buy DS90LV047ATMTC online?
Use the Request a Quote form on this page to request DS90LV047ATMTC availability, current unit pricing, and lead time from XAIPART. The form is the appropriate commercial channel for a quantity-specific quotation and avoids publishing stale pricing. When requesting a quote, include the target quantity, date code preference, and whether the 16-pin TSSOP (PW) ordering option is acceptable.
How much does the DS90LV047ATMTC cost?
Current DS90LV047ATMTC pricing is obtained through the Request a Quote form on this page rather than from a static price table. Submit the required quantity and any date-code or packaging requirements so XAIPART can return a current quotation for the exact MPN. The manufacturer product page and part-detail listing identify the supported ordering configurations for this device.
What is the lead time for DS90LV047ATMTC?
The current lead time for DS90LV047ATMTC should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, stock position, and the selected manufacturer ordering code. Providing the required annual and initial usage quantities helps XAIPART confirm the most appropriate supply plan and schedule.
Is DS90LV047ATMTC currently available?
The Texas Instruments DS90LV047A product page lists the DS90LV047ATMTC ordering configuration in its part-details section, and distributor listings identify the part as orderable. Real-time stock and allocation can change, so use the Request a Quote form on this page for the current availability of the exact MPN and requested quantity.
What are the key specifications of DS90LV047ATMTC that engineers should know?
The key DS90LV047ATMTC specifications are four LVDS differential outputs, a maximum 400 Mbps signaling rate, a 3.3 V supply, CMOS/LVTTL/TTL input compatibility, and a 16-pin TSSOP (PW) package. Texas Instruments specifies an operating temperature range of -40 °C to 85 °C. These parameters define its suitability for 400 Mbps point-to-point links, multi-channel clock distribution, and parallel-to-serial interfaces.
How should DS90LV047ATMTC LVDS traces be routed on a PCB?
Route each DS90LV047ATMTC LVDS output as a length-matched differential pair on a continuous ground reference, with the spacing defined by the stack-up's differential impedance. Keep the driver outputs away from high-current switching paths and maintain consistent geometry through vias and connectors. For a 400 Mbps design, verify eye opening, differential skew, return loss, and common-mode voltage at the receiver rather than relying only on schematic connectivity.

엔지니어링 참조 데이터: DS90LV047ATMTC — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the DS90LV047ATMTC for a 3.3 V, 400 Mbps, four-channel LVDS transmitting design that uses the 16-pin TSSOP (PW) footprint and benefits from the Texas Instruments DS90LV047A documentation ecosystem. Select DS90LV047ATMTC/NOPB, DS90LV047ATMTCX/NOPB, DS90LV047ATM/NOPB, or DS90LV047ATMTC/DRPB when the manufacturer ordering table indicates a preferred marking, packing, or sourcing configuration with equivalent electrical functionality. Evaluate PI90LV047ALE when a qualified cross-manufacturer source is valuable, but verify its exact pin map, timing, output swing, temperature rating, and supply-current limits before production substitution. Choose the DS90LV048ATMTC/NOPB only when the required function is reception rather than transmission. For any substitution, confirm channel count, 3.3 V operation, 400 Mbps capability, TSSOP-16 footprint, LVDS output standard, and the end-to-end eye margin.

대체품과의 비교

파라미터 이 제품 DS90LV047ATMTC/NOPB DS90LV047ATMTCX/NOPB DS90LV047ATM/NOPB DS90LV047ATMTC/DRPB PI90LV047ALE
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Pericom Semiconductor
Package 16-pin TSSOP (PW) 16-pin TSSOP (PW) 16-pin TSSOP (PW) 16-pin TSSOP (PW) 16-pin TSSOP (PW) 16-pin TSSOP
Device Type 4/0 quad LVDS differential line driver 4/0 quad LVDS differential line driver 4/0 quad LVDS differential line driver 4/0 quad LVDS differential line driver 4/0 quad LVDS differential line driver Quad LVDS differential line driver
Maximum Signaling Rate 400 Mbps 400 Mbps 400 Mbps 400 Mbps 400 Mbps 400 Mbps
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Number of Differential Drivers 4 4 4 4 4 4
Number of Receivers 0 0 0 0 0 0
Output Signal LVDS differential LVDS differential LVDS differential LVDS differential LVDS differential LVDS differential

주요 차별점

  • Four transmit channels integrated into one compact package (vs DS90LV048ATMTC/NOPB)
  • Direct single-manufacturer alternative path (vs PI90LV047ALE)
  • Wide specified industrial temperature range (vs PI90LV047ALE)

설계 노트

Route every LVDS output as a controlled-impedance differential pair with symmetric geometry and a continuous ground reference beneath the traces. Define the target differential impedance from the actual PCB stack-up and use the same general topology for all four channels. Avoid stubs, unnecessary vias, and abrupt width changes. Keep the driver outputs away from inductors, high-current switching loops, and clocks with fast edges because those sources can create common-mode noise and degrade receiver eye margins.

Place the DS90LV047ATMTC close to the source of the four input signals and to the connector or transmission-line origin. Provide a low-impedance 3.3 V plane and place local supply bypassing between the device supply pin and the nearest ground reference, following the capacitance values and layout recommendations in the manufacturer datasheet. Maintain a short, uninterrupted return path beneath each pair. When the links cross a connector or board boundary, verify differential impedance, insertion loss, and return loss across the complete channel.

Do not treat the 400 Mbps signaling-rate rating as a guaranteed end-to-end performance guarantee. Evaluate input-to-output timing, channel skew, jitter, receiver threshold, connector and cable loss, and the required mask. Measure eye diagrams at the receiving endpoint with realistic patterns and equalization, if used. The DS90LV048ATMTC/NOPB family provides a compatible receiver function, but a complete link still requires separate confirmation of source encoding, clock topology, and termination.

Avoid confusing the DS90LV047A transmitter with the DS90LV048A receiver or with unrelated single-channel LVDS drivers. Confirm that the selected ordering code retains the four-driver, zero-receiver configuration, the 16-pin TSSOP (PW) footprint, and the required 3.3 V supply. Also avoid assuming that every similarly named ordering code has identical temperature or shipping documentation. Review the manufacturer ordering table before releasing a BOM or approving a second-source substitution.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance status is not stated for this specific ordering code in the manufacturer product information and cross-reference listings. Verify RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation for the exact assembled ordering option before release.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ds90lv047atmtc nopb DS90LV047ATMTC datasheet DS90LV047ATMTC pinout DS90LV047ATMTC datasheet pdf Texas Instruments DS90LV047ATMTC DS90LV047ATMTC equivalent DS90LV047ATMTC replacement DS90LV047ATMTC cross reference DS90LV047ATMTC vs PI90LV047ALE DS90LV047ATMTC vs DS90LV048ATMTC DS90LV047ATMTC 400 Mbps LVDS driver DS90LV047ATMTC TSSOP-16 footprint DS90LV047ATMTC price DS90LV047ATMTC stock DS90LV047ATMTC LVDS application circuit

관련 부품 & 용어

Texas Instruments DS90LV047ATMTC DS90LV047A DS90LV047ATMTC/NOPB DS90LV047ATMTCX/NOPB DS90LV047ATM/NOPB DS90LV047ATMTC/DRPB DS90LV048ATMTC/NOPB PI90LV047ALE LVDS Low Voltage Differential Signaling differential line driver interface IC CMOS logic LVTTL TTL 400 Mbps 3.3 V supply TSSOP-16 PW package surface mount quad transmitter controlled-impedance routing differential signaling common-mode noise parallel-to-serial interface
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기