PIC32MZ0512EFF100-E/GJX - 200MHz 512KB Flash MCU | Microchip
부품 번호: PIC32MZ0512EFF100-E/GJX ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $11.85 | $11.85 |
| 10 | $10.67 | $106.70 |
| 100 | $9.48 | $948.00 |
| 500 | $8.52 | $4,260.00 |
| 1,000 | $7.62 | $7,620.00 |
PIC32MZ0512EFF100-E/GJX 개요
A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a processor core, program and data memory, and a configurable peripheral set. The PIC32MZ EF family is positioned at the high end of Microchip's PIC32 portfolio, targeting applications that demand deterministic real-time response combined with rich connectivity. Within the broader taxonomy, this part is a 32-bit microcontroller -> RISC MCU -> embedded processor -> semiconductor IC. The MIPS32 M-Class architecture supports hardware multiply-accumulate, saturating and fractional math, and DSP primitives that simplify audio and motor-control firmware.
Key features include dual-panel Flash for live firmware update, 12-bit ADC at 18 Msps, analog comparators, multiple timer/counter modules, an 8-bit parallel master port (PMP) for graphics, and dedicated audio interfaces (I2S/AC97). The 100-TFBGA package is paired with Microchip's MPLAB Harmony development framework, providing integrated middleware for USB, TCP/IP, graphics, and motor control.
Typical applications include industrial automation controllers, automotive body and HMI modules, IoT edge gateways with Ethernet, graphics display terminals, and sensor-hub platforms. The combination of CAN, Ethernet, and HS USB makes it well suited for connected industrial nodes, while the FPU and dual-panel Flash support safety-critical firmware with in-field update capability.
Designers should pay close attention to the 100-TFBGA PCB layout, which requires microvia or laser-drilled via stack-ups; the high 200 MHz core speed demands careful power-plane decoupling. The dual-panel Flash feature requires the application to manage two program images and a bootloader partition. AEC-Q100 qualification simplifies automotive end-product certification.
This page synthesizes distributor pricing, drop-in alternatives drawn from the PIC32MZ EF family, and practical PCB design notes that supplement the manufacturer datasheet.
드롭인 대체품: PIC32MZ0512EFF100-E/GJX — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MZ0512EFF100-E/GJX (동일 폼 팩터 및 풋프린트) — 차이점: Core Architecture, ADC, Package, Ethernet, Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MZ0512EFE100-E/GJX
✅ 드롭인✓ 재고 있음
$9.52 / 개
데이터시트 보기 →PIC32MZ0512EFF100-I/GJX
✅ 드롭인✓ 재고 있음
$5.85 / 개
데이터시트 보기 →PIC32MZ0512EFF100T-E/GJX
✅ 드롭인✓ 재고 있음
$6.65 / 개
데이터시트 보기 →PIC32MZ1024EFF100-E/GJX
✅ 드롭인✓ 재고 있음
$7.75 / 개
데이터시트 보기 →PIC32MZ0512EFE100-E/PT
✅ 드롭인✓ 재고 있음
$7.92 / 개
데이터시트 보기 →PIC32MZ0512EFF100-E/GJX 최대 정격 & 전기적 특성
| Core Architecture | MIPS32 M-Class (PIC32MZ EF) |
| Core Frequency | 200 MHz (330 DMIPS) |
| Program Flash | 512 KB (512K x 8) |
| SRAM | 128 KB |
| FPU | IEEE 754 single-precision |
| Operating Voltage | 2.2 V to 3.6 V (typical 3.3 V) |
| 동작 온도 | -40C to +125C (extended, -E suffix) |
| 패키지 | 100-pin TFBGA (7x7 mm) |
| Crypto Engine | Not present (No-Crypto variant) |
| CAN | Yes (CAN 2.0B) |
| USB | Hi-Speed USB 2.0 (Host/Device/OTG) |
| Ethernet | 10/100 Mbps MAC with MII/RMII |
| ADC | 12-bit, up to 18 Msps |
| AEC-Q100 | Qualified (automotive grade) |
| 실장 유형 | Surface Mount (TFBGA) |
PIC32MZ0512EFF100-E/GJX 핀 구성
| 핀 A1 | AVDD — Analog supply voltage |
| 핀 A2 | AVSS — Analog ground |
| 핀 A3 | VREF+ — ADC positive reference |
| 핀 A4 | VREF- — ADC negative reference |
| 핀 A5 | AN0 — Analog input 0 |
| 핀 A6 | AN1 — Analog input 1 |
| 핀 A7 | AN2 — Analog input 2 |
| 핀 A8 | AN3 — Analog input 3 |
| 핀 A9 | AN4 — Analog input 4 |
| 핀 A10 | AN5 — Analog input 5 |
| 핀 B1 | VDD — Digital supply voltage |
| 핀 B2 | VSS — Digital ground |
| 핀 B3 | OSC1 — Crystal oscillator input |
| 핀 B4 | OSC2 — Crystal oscillator output |
| 핀 B5 | AN6 — Analog input 6 |
| 핀 B6 | AN7 — Analog input 7 |
| 핀 B7 | AN8 — Analog input 8 |
| 핀 B8 | AN9 — Analog input 9 |
| 핀 B9 | AN10 — Analog input 10 |
| 핀 B10 | AN11 — Analog input 11 |
| 핀 C1 | PGEC1 — ICSP programming clock |
| 핀 C2 | PGED1 — ICSP programming data |
| 핀 C3 | TMS — JTAG test mode select |
| 핀 C4 | TCK — JTAG test clock |
| 핀 C5 | TDI — JTAG test data in |
| 핀 C6 | TDO — JTAG test data out |
| 핀 C7 | AN12 — Analog input 12 |
| 핀 C8 | AN13 — Analog input 13 |
| 핀 C9 | AN14 — Analog input 14 |
| 핀 C10 | AN15 — Analog input 15 |
| 핀 D1 | PMD0 — Parallel master port data 0 |
| 핀 D2 | PMD1 — Parallel master port data 1 |
| 핀 D3 | PMD2 — Parallel master port data 2 |
| 핀 D4 | PMD3 — Parallel master port data 3 |
| 핀 D5 | PMD4 — Parallel master port data 4 |
| 핀 D6 | PMD5 — Parallel master port data 5 |
| 핀 D7 | PMD6 — Parallel master port data 6 |
| 핀 D8 | PMD7 — Parallel master port data 7 |
| 핀 D9 | PMALL — PMP address latch low |
| 핀 D10 | PMRD — PMP read strobe |
| 핀 E1 | PMCS1 — PMP chip select 1 |
| 핀 E2 | PMCS2 — PMP chip select 2 |
| 핀 E3 | PMWR — PMP write strobe |
| 핀 E4 | PMA0 — PMP address 0 |
| 핀 E5 | PMA1 — PMP address 1 |
| 핀 E6 | PMA2 — PMP address 2 |
| 핀 E7 | PMA3 — PMP address 3 |
| 핀 E8 | PMA4 — PMP address 4 |
| 핀 E9 | PMA5 — PMP address 5 |
| 핀 E10 | PMA6 — PMP address 6 |
| 핀 F1 | USBID — USB OTG ID pin |
| 핀 F2 | VBUS — USB VBUS sense |
| 핀 F3 | D+ — USB D+ data line |
| 핀 F4 | D- — USB D- data line |
| 핀 F5 | ETXD0 — Ethernet transmit data 0 |
| 핀 F6 | ETXD1 — Ethernet transmit data 1 |
| 핀 F7 | ERXD0 — Ethernet receive data 0 |
| 핀 F8 | ERXD1 — Ethernet receive data 1 |
| 핀 F9 | ERXCLK — Ethernet receive clock |
| 핀 F10 | ETXCLK — Ethernet transmit clock |
| 핀 G1 | C1RX — CAN 1 receive |
| 핀 G2 | C1TX — CAN 1 transmit |
| 핀 G3 | SDA1 — I2C 1 data |
| 핀 G4 | SCL1 — I2C 1 clock |
| 핀 G5 | SCK1 — SPI 1 clock |
| 핀 G6 | SDI1 — SPI 1 data in |
| 핀 G7 | SDO1 — SPI 1 data out |
| 핀 G8 | U1TX — UART 1 transmit |
| 핀 G9 | U1RX — UART 1 receive |
| 핀 G10 | U1CTS — UART 1 clear-to-send |
| 핀 H1 | OC1 — Output compare 1 / PWM |
| 핀 H2 | OC2 — Output compare 2 / PWM |
| 핀 H3 | OC3 — Output compare 3 / PWM |
| 핀 H4 | OC4 — Output compare 4 / PWM |
| 핀 H5 | IC1 — Input capture 1 |
| 핀 H6 | IC2 — Input capture 2 |
| 핀 H7 | INT0 — External interrupt 0 |
| 핀 H8 | INT1 — External interrupt 1 |
| 핀 H9 | INT2 — External interrupt 2 |
| 핀 H10 | INT3 — External interrupt 3 |
| 핀 J1 | MCLR — Master clear reset |
| 핀 J2 | TRCLK — Trace clock |
| 핀 J3 | TRD0 — Trace data 0 |
| 핀 J4 | TRD1 — Trace data 1 |
| 핀 J5 | SDA2 — I2C 2 data |
| 핀 J6 | SCL2 — I2C 2 clock |
| 핀 J7 | RTCC — Real-time clock output |
| 핀 J8 | CVREF — Comparator voltage reference |
| 핀 J9 | C2RX — CAN 2 receive |
| 핀 J10 | C2TX — CAN 2 transmit |
일반적인 애플리케이션
PIC32MZ0512EFF100-E/GJX 적합 용도: 6 애플리케이션s: Industrial Automation Controllers, Automotive Body and HMI Modules, IoT Edge Gateways with Ethernet, Graphics Display Terminals, Motor Control and Drives, Sensor Hubs and Data Loggers.
Industrial Automation Controllers
The PIC32MZ0512EFF100-E/GJX fits industrial automation controllers because its 200 MHz MIPS32 M-class core with single-precision FPU executes PID loops, motion trajectories, and Modbus/TCP stacks with deterministic latency. The 512 KB dual-panel Flash supports live firmware updates critical for factory-floor deployments where downtime is expensive, while 128 KB SRAM accommodates Ethernet frame buffers for PROFINET/EtherNet/IP slave stacks. The AEC-Q100 qualification and -40C to +125C operating range let the same BOM variant serve both industrial cabinets and on-vehicle subsystems, simplifying part numbering for OEM product lines.
추천
Automotive Body and HMI Modules
The PIC32MZ0512EFF100-E/GJX targets automotive body and HMI modules where AEC-Q100 qualification, -40C to +125C operation, and integrated CAN 2.0B are mandatory. The dedicated audio interfaces (I2S/AC97) and 8-bit PMP graphics port let the MCU drive segment-LCD or TFT panels for instrument clusters and HVAC controls, while the FPU accelerates audio DSP such as active noise cancellation. With HS USB, Ethernet, and CAN all available concurrently, designers can implement body-domain gateways that aggregate sensor data from sub-buses and expose it to infotainment or telematics links.
추천
IoT Edge Gateways with Ethernet
The PIC32MZ0512EFF100-E/GJX is well matched to IoT edge gateways because the integrated 10/100 Ethernet MAC plus HS USB 2.0 and CAN deliver the multi-protocol bridging required between sensor networks, cloud uplinks, and local displays. The 128 KB SRAM buffers TLS handshakes and MQTT payloads, while 512 KB Flash holds a TCP/IP stack, MQTT client, and OTA bootloader. MPLAB Harmony 3 provides mature middleware for lwIP and wolfSSL, shortening development. The FPU lets local analytics (filtering, FFT-based vibration analysis) run on-gateway, reducing uplink bandwidth.
추천
Graphics Display Terminals
For graphics display terminals, the PIC32MZ0512EFF100-E/GJX combines a 200 MHz MIPS32 core with a parallel master port (PMP) capable of driving small TFT displays up to WQVGA resolution. The FPU accelerates vector graphics rendering, while the dedicated timer/PWM outputs support backlight control and touch-panel coordination. The 512 KB Flash comfortably holds a graphics library plus application logic, and the dual-panel Flash architecture enables safe in-field UI redesigns. The on-chip 12-bit ADC reads touch coordinates and ambient light sensors without external components.
추천
Motor Control and Drives
The PIC32MZ0512EFF100-E/GJX serves motor-control applications such as BLDC, PMSM, and stepper drives thanks to its 200 MHz core, hardware FPU for Park/Clarke transforms, and high-resolution PWM/timer peripherals. The 18 Msps 12-bit ADC samples phase currents with sub-microsecond conversion latency, while the dual-panel Flash enables field-upgradeable control firmware - valuable for tuning commutation parameters in deployed drives. CAN connectivity supports CiA 402 or CANopen drive profiles, and the extended -40C to +125C operating range handles drive-cabinet ambient temperatures.
추천
Sensor Hubs and Data Loggers
The PIC32MZ0512EFF100-E/GJX works as a sensor hub and data logger because its 12-bit 18 Msps ADC, multiple I2C/SPI ports, and 128 KB SRAM can aggregate readings from many transducers while running local filtering. The USB device port streams logged data to a host PC without external bridge chips, and the Ethernet MAC supports industrial protocols like BACnet for building automation. Dual-panel Flash provides safe in-field firmware update with rollback, while the AEC-Q100 grade allows the same part to be used in cabin-mounted automotive sensor modules.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MZ0512EFF100-E/GJX — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MZ0512EFE100-E/GJX | PIC32MZ0512EFF100-I/GJX | PIC32MZ1024EFF100-E/GJX |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TFBGA (7x7 mm) | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same |
| Core Speed | 200 MHz / 330 DMIPS | 200 MHz / 330 DMIPS | 200 MHz / 330 DMIPS | 200 MHz / 330 DMIPS |
| Flash | 512 KB | 512 KB | 512 KB | 1 MB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB |
| Crypto Engine | No | Yes (AES/SHA/RNG) | No | No |
| Temperature Grade | -40C to +125C (-E) | -40C to +125C (-E) | -40C to +85C (-I) | -40C to +125C (-E) |
| AEC-Q100 | Qualified | Qualified | Not qualified (industrial) | Qualified |
주요 차별점
- AEC-Q100 qualified 32-bit MCU with extended -40C to +125C operating range in same package as industrial grade (vs PIC32MZ0512EFF100-I/GJX)
- Dual-panel Flash enables live firmware update with atomic rollback (vs PIC32MX570F512L-I/PT)
- Integrated 10/100 Ethernet MAC with hardware DMA offload (vs PIC32MX795F512L-80I/PF)
설계 노트
The 100-TFBGA package at 0.65 mm pitch requires a 4-layer PCB minimum with microvia or laser-drilled via stack-ups for escape routing. Per Microchip family datasheet section on PCB layout, place at least one decoupling capacitor (100 nF X7R) within 2 mm of every VDD/VSS pair, plus bulk 4.7 uF on each supply rail. The exposed thermal pad is not present on this TFBGA, so thermal dissipation depends primarily on the internal bond wires and the application's duty cycle.
The PIC32MZ0512EFF100-E/GJX requires a 3.3 V main supply (2.2 V to 3.6 V allowed) with separate analog (AVDD) and digital (VDD) rails. Per the family datasheet, AVDD and VDD must be powered up within 50 ms of each other to avoid latch-up; place a ferrite bead or small resistor between AVDD and VDD, then tie both to the same 3.3 V rail with separate decoupling. For noise-sensitive ADC measurements, add a 10 ohm isolation resistor between AVDD and VDD to decouple switching noise from the analog reference.
Do not confuse the FF (no-crypto) and FE (with-crypto) variants when ordering - both share the same 100-TFBGA footprint and same datasheet but the FE variant requires enabling the crypto module in Harmony 3 and adds approximately $1-2 to unit cost. Also note that the -E temperature grade (-40C to +125C) is required for AEC-Q100 automotive designs; the -I grade only reaches +85C and will fail AEC-Q100 stress profiles. Finally, ensure the dual-panel Flash bootloader partition is allocated before application code is written.
규정 준수 정보
AEC-Q100 qualified per the part family datasheet. RoHS compliant and lead-free per Microchip product page. Halogen-free status should be confirmed against the latest Microchip MDDS document.