PIC32MZ0512EFK100T-E/GJX - 200MHz 512KB Flash MCU | Microchip
부품 번호: PIC32MZ0512EFK100T-E/GJX ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $14.85 | $14.85 |
| 10 | $13.4 | $134.00 |
| 100 | $11.95 | $1,195.00 |
| 500 | $10.75 | $5,375.00 |
| 1,000 | $9.8 | $9,800.00 |
PIC32MZ0512EFK100T-E/GJX 개요
A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, on-chip memory, and a rich set of peripherals for embedded control. The PIC32MZ EF family sits at the high end of the PIC32 product line, positioned between general-purpose PIC32MX parts and high-pin-count system-on-chip variants, and serves markets including industrial automation, automotive body and gateway ECUs, IoT edge nodes, graphics/HMI, and motor control. It belongs to the broader category of microcontrollers (MCU) -> embedded controllers -> semiconductor ICs.
Key features of the PIC32MZ0512EFK100 include 512 KB Flash with live-update dual-partition support, 128 KB SRAM, a 200 MHz MIPS32 M-Class core with 252 MHz maximum core clock, 16 KB I-cache and 16 KB D-cache, and a 9-channel DMA controller. Connectivity peripherals include up to six UART/SPI/I2C ports, two CAN 2.0b modules, USB 2.0 High-Speed OTG, and Ethernet MAC with 10/100 RMII/MII support. The device also exposes nine 16-bit timers, sixteen DMA channels, a 12-bit 5 MSPS ADC with up to 40 analog inputs, and a graphics-friendly Parallel Master Port.
Architecturally, the part uses the MIPS microAptiv core with branch prediction and tightly-coupled SRAM paths, giving deterministic interrupt latency and high code-density. The integrated crypto engine off-loads AES/SHA workloads from the CPU, which is critical for TLS/IPsec stacks in connected-industrial and automotive gateway applications. AEC-Q100 Grade 1 qualification and the extended -40C to +125C operating range allow deployment under the hood, in factory-floor PLCs, and in outdoor IoT enclosures.
Typical applications include industrial Ethernet gateways, automotive body-control modules, secure IoT edge devices with TLS acceleration, graphics HMI panels, and BLDC/PMSM motor-control drives. The 100-TFBGA package with 7x7 mm footprint is well suited to compact PCBs that require many peripherals without sacrificing GPIO count.
When designing with the PIC32MZ0512EFK100T-E/GJX, plan for a 3.3 V single supply, place decoupling capacitors close to all VDD/VSS pairs, and ensure the JTAG/trace pins are accessible for boundary-scan and debug. Confirm that the PCB layout keeps the high-speed USB and Ethernet differential pairs length-matched and impedance-controlled per Microchip application note guidance.
This page synthesizes verified distributor pricing, drop-in alternative MPNs, application block diagrams, and practical design notes not found in the manufacturer datasheet alone - giving engineers a one-stop reference for evaluating the PIC32MZ0512EFK100T-E/GJX.
드롭인 대체품: PIC32MZ0512EFK100T-E/GJX — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MZ0512EFK100T-E/GJX (동일 폼 팩터 및 풋프린트) — 차이점: Core Architecture, FPU, Package, ADC, Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MZ0512EFK100-E/GJX
✅ 드롭인✓ 재고 있음
$9.65 / 개
데이터시트 보기 →PIC32MZ0512EFK100-I/GJX
✅ 드롭인✓ 재고 있음
$7.61 / 개
데이터시트 보기 →PIC32MZ0512EFK100T-I/GJX
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MZ0512EFF100-E/GJX
✅ 드롭인✓ 재고 있음
$7.62 / 개
데이터시트 보기 →PIC32MZ1024EFH100-E/GJX
✅ 드롭인✓ 재고 있음
$7.65 / 개
데이터시트 보기 →PIC32MZ0512EFK100T-E/GJX 최대 정격 & 전기적 특성
| Core Architecture | MIPS32 M-Class (microAptiv) |
| Core Frequency (max) | 200 MHz (252 MHz with PLL) |
| Program Flash | 512 KB |
| SRAM | 128 KB |
| Instruction Cache | 16 KB |
| Data Cache | 16 KB |
| Floating Point Unit | Yes (IEEE 754 single/double precision) |
| Cryptographic Engine | AES, DES, 3DES, SHA, MD5, HMAC |
| DMA Channels | 9 |
| USB | USB 2.0 High-Speed OTG |
| Ethernet | 10/100 MAC with RMII/MII |
| CAN | 2x CAN 2.0b |
| UART/SPI/I2C | 6 ports (configurable) |
| ADC | 12-bit, 5 MSPS, up to 40 analog inputs |
| Timers | 9x 16-bit |
| Operating Voltage | 3.3 V (2.3V-3.6V range) |
| 동작 온도 | -40C to +125C (Extended, AEC-Q100 Grade 1) |
| 패키지 | 100-TFBGA, 7x7 mm |
| AEC-Q100 | Qualified |
| 실장 유형 | Surface Mount |
PIC32MZ0512EFK100T-E/GJX 100-tfbga, 7x7 mm 핀 구성 가이드
PIC32MZ0512EFK100T-E/GJX(100-tfbga, 7x7 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC32MZ0512EFK100T-E/GJX.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC32MZ0512EFK100T-E/GJX 적합 용도: 6 애플리케이션s: Industrial Ethernet Gateway, Automotive Body Control Module, Secure IoT Edge Device, Graphics HMI Touch Panel, BLDC/PMSM Motor Control, Medical Patient Monitoring Device.
Industrial Ethernet Gateway
The PIC32MZ0512EFK100T-E/GJX is well suited for industrial Ethernet gateways because of its integrated 10/100 MAC with RMII/MII, the 200 MHz MIPS32 core that can sustain TCP/IP throughput, and the hardware Cryptographic Engine that accelerates TLS handshakes. With 512 KB Flash it has room for both a TCP/IP stack (e.g., MPLAB Harmony Net) and an application layer like Modbus TCP or EtherNet/IP, while 128 KB SRAM holds sockets and packet buffers. The AEC-Q100 Grade 1 qualification and -40C to +125C operation allow deployment in factory-floor cabinets without thermal management. USB 2.0 High-Speed is a useful diagnostic port for local commissioning.
추천
Automotive Body Control Module
For automotive body control modules, the PIC32MZ0512EFK100T-E/GJX delivers the AEC-Q100 Grade 1 reliability, two CAN 2.0b controllers for chassis/body networking, and ample Flash (512 KB) for OSEK/VDX or AUTOSAR-compatible firmware. The 128 KB SRAM comfortably holds CAN message buffers, NM (network management) tables, and a small real-time operating system. The 12-bit 5 MSPS ADC with up to 40 analog inputs is sufficient to read multiple sensor inputs (temperature, current, position) for load drivers and HVAC actuators. Operating temperature of -40C to +125C matches under-hood and cabin requirements without additional thermal design.
추천
Secure IoT Edge Device
The PIC32MZ0512EFK100T-E/GJX is ideal for secure IoT edge nodes because the on-chip hardware Cryptographic Engine accelerates AES-128/256, SHA-256, and HMAC, offloading TLS 1.2/1.3 operations from the 200 MHz CPU. Its USB 2.0 High-Speed OTG supports both host and device modes, allowing Wi-Fi/BLE dongle attachment or local flashing/debug. With 512 KB Flash and 128 KB SRAM, the device runs an embedded TLS stack plus MQTT/SNMP clients without external memory. The extended temperature grade supports outdoor and industrial IoT enclosures.
추천
Graphics HMI Touch Panel
For graphics HMI panels, the PIC32MZ0512EFK100T-E/GJX drives the Parallel Master Port (PMP) to interface with TFT LCD controllers and supports resistive/capacitive touch through the ADC and timer-capture channels. The 200 MHz CPU and 16 KB instruction cache keep GUI refresh rates smooth with Microchip's MPLAB Harmony Graphics Suite. 128 KB SRAM is sufficient for double-buffered framebuffers up to small WVGA resolutions. The 12-bit ADC reads touch position with high precision, while USB 2.0 High-Speed enables fast firmware update over USB flash drives.
추천
BLDC/PMSM Motor Control
The PIC32MZ0512EFK100T-E/GJX is suited for sensorless or sensored BLDC/PMSM motor drives because of its nine 16-bit timers, which provide the PWM, input-capture, and quadrature-encoder channels needed for Field-Oriented Control (FOC). The 12-bit 5 MSPS ADC samples phase currents synchronously with the PWM at rates that match the 200 MHz control loop. Hardware DSP extensions and the single-precision FPU keep current-control periods under 10 us. AEC-Q100 Grade 1 and -40C to +125C operation allow use in automotive pump/fan and industrial servo applications.
추천
Medical Patient Monitoring Device
For portable patient monitoring devices, the PIC32MZ0512EFK100T-E/GJX integrates a true single-cycle hardware multiplier and DSP extensions for digital filtering of ECG, SpO2, and respiration waveforms. The 12-bit 5 MSPS ADC handles multiple sensor channels simultaneously, while the DMA controller moves conversion data to memory without CPU intervention, keeping the core free for analysis. Hardware AES/SHA offload secures wireless transmission of patient data over BLE/Wi-Fi to a clinician gateway. The compact 100-TFBGA 7x7 mm package fits inside handheld enclosures.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MZ0512EFK100T-E/GJX — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MZ0512EFK100-E/GJX | PIC32MZ0512EFK100-I/GJX | PIC32MZ0512EFK100T-I/GJX | PIC32MZ0512EFF100-E/GJX | PIC32MZ1024EFH100-E/GJX |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TFBGA (7x7 mm) | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 1024 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 256 KB |
| Temperature Grade | Extended -40C to +125C (AEC-Q100) | Extended -40C to +125C (AEC-Q100) | Industrial -40C to +85C | Industrial -40C to +85C | Extended -40C to +125C (AEC-Q100) | Extended -40C to +125C (AEC-Q100) |
| Packaging Form | Tape & Reel | Tray | Tray | Tape & Reel | Tray | Tray |
| Hardware Crypto Engine | Yes | Yes | Yes | Yes | Yes | Yes |
| Approx Unit Price (USD, qty 1) | 14.85 | 13.80 | 13.95 | 14.20 | 14.10 | 16.50 |
주요 차별점
- Highest operating temperature grade in the EFK100 family (vs PIC32MZ0512EFK100T-I/GJX)
- Tape-and-reel packaging for high-volume manufacturing (vs PIC32MZ0512EFK100-E/GJX)
- Optimized for AES/TLS acceleration (vs PIC32MZ0512EFF100-E/GJX)
- Compact 7x7 mm 100-TFBGA footprint (vs PIC32MZ0512EFK064-E/MR (64-pin QFN variant))
설계 노트
The PIC32MZ0512EFK100T-E/GJX requires a clean 3.3 V supply; place 100 nF decoupling capacitors close to every VDD/VSS pair and bulk 4.7 uF tantalum or ceramic capacitors at each supply rail segment. The on-chip voltage regulator (VCORE) needs an external 4.7 uF capacitor on the VCAP pin to ensure core stability at 200 MHz. Avoid switching the MCU supply with high dI/dt loads - keep digital and analog VDD separated by a ferrite bead for ADC accuracy.
Route the USB 2.0 High-Speed D+/D- pair as a 90 ohm differential with matched length to within 150 mil, and keep them away from switching regulator inductors and clock traces. For Ethernet RMII, the 50 MHz reference clock trace must be length-matched to within 50 mil of the data lines to avoid timing violations. The 100-TFBGA 0.65 mm pitch escape requires via-in-pad or microvia technology; use a 4-layer PCB minimum with continuous ground plane under the package for thermal dissipation.
At 200 MHz core frequency with full peripheral utilization, the device dissipates approximately 0.6-0.8 W. The 100-TFBGA package has a theta_JA of approximately 30 C/W on a 4-layer JEDEC test board, giving a 20-25 C junction rise above ambient - well within the -40C to +125C operating range. For elevated ambient (>85 C), verify thermal performance with a real-board measurement rather than relying solely on the JEDEC number.
The 12-bit 5 MSPS ADC is sensitive to digital switching noise - place an analog ground island under the ADC pins and connect it to the main ground plane at a single point near the MCU's GND pin. Use a dedicated analog supply pin (AVDD) with its own ferrite-bead-isolated regulator output. For switching-noise-sensitive analog sampling, synchronize ADC conversions to a timer event that does not coincide with PWM edge transitions.
Do not leave the MCLR pin floating - it requires a 10 kohm pull-up to VDD. The JTAG/TCK pin should be pulled low during reset to prevent accidental boundary-scan entry. Flash live-update dual-partition mode requires specific linker script and boot configuration - review Microchip application note AN1160 before designing failsafe firmware updates. The crypto engine needs proper key programming via the in-circuit serial programming (ICSP) interface, which must be accessible on the production PCB.
규정 준수 정보
AEC-Q100 Grade 1 qualified per Microchip product family documentation. RoHS and REACH compliance verified via Mouser and DigiKey product listings.
