STM32F405ZGT6 - ARM Cortex-M4F MCU 168MHz 1MB Flash | STMicroelectronics
부품 번호: STM32F405ZGT6 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $12.5 | $12.50 |
| 10 | $11.2 | $112.00 |
| 100 | $9.8 | $980.00 |
| 500 | $8.9 | $4,450.00 |
| 1,000 | $8.1 | $8,100.00 |
STM32F405ZGT6 개요
A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The STM32F405ZGT6 belongs to the STM32F4 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers. These devices are widely used in industrial control, consumer electronics, and IoT applications due to their balance of performance, power efficiency, and peripheral integration.
Key features include a 168 MHz CPU with DSP instructions and FPU, 1 MB Flash, 192 KB SRAM, and a comprehensive set of peripherals: three 12-bit ADCs, two DACs, multiple timers, USART, SPI, I2C, USB OTG FS/HS, Ethernet MAC, and camera interface. The device supports a supply voltage range of 1.8V to 3.6V and operates over -40°C to +85°C. It includes a memory protection unit (MPU), embedded trace macrocell (ETM), and a wide range of communication interfaces.
The STM32F405ZGT6 is built on a 90nm process technology, offering high performance with low power consumption. The ART Accelerator™ enables zero-wait-state execution from Flash, maximizing throughput. The FPU accelerates mathematical computations, which is critical for digital signal processing and motor control algorithms. The device also features a true random number generator (RNG) and a cryptographic acceleration cell for secure applications.
Typical applications include industrial motor control, medical equipment, consumer electronics, IoT gateways, and audio processing. The rich peripheral set and high clock speed make it ideal for applications requiring real-time responsiveness and complex algorithms. For example, in motor control, the advanced timers generate PWM signals with dead-time insertion, while the ADCs sample current and voltage feedback for closed-loop control.
When designing with this MCU, ensure proper decoupling of the power supply pins with 100nF capacitors close to each VDD pin and a bulk capacitor. The VDDA pin must be connected to a clean analog supply, and VREF+ should be filtered to achieve accurate ADC conversions. The BOOT0 pin configuration determines the boot source, and NRST requires a pull-up resistor and capacitor for reliable reset.
드롭인 대체품: STM32F405ZGT6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32F405ZGT6 (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Communication Interfaces, Package, Timers, Core.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
STM32F407ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$5.25 / 개
데이터시트 보기 →STM32F415ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.5 / 개
데이터시트 보기 →STM32F417ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT7
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32F405ZGT6TR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32F405ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$8.1 / 개
데이터시트 보기 →STM32F405ZGT6 최대 정격 & 전기적 특성
| Core | ARM Cortex-M4F with FPU |
| 최대 클록 주파수 | 168 MHz |
| Flash Memory | 1 MB |
| SRAM | 192 KB |
| Supply Voltage Range | 1.8 V to 3.6 V |
| 동작 온도 범위 | -40°C to +85°C |
| 패키지 | LQFP144 (20x20 mm, 0.5 mm pitch) |
| Number of I/Os | 114 |
| ADC | 3x 12-bit, up to 2.4 MSPS |
| DAC | 2x 12-bit |
| Timers | 12x 16-bit, 2x 32-bit |
| Communication Interfaces | USART, SPI, I2C, USB OTG FS/HS, Ethernet MAC, CAN |
| DMA | 16-channel |
| Cryptographic Acceleration | AES, DES, 3DES, RNG |
| RoHS 상태 | Compliant |
STM32F405ZGT6 핀 구성
| 핀 1 | PE2 — GPIO / TRACECLK |
| 핀 2 | PE3 — GPIO / TRACED0 |
| 핀 3 | PE4 — GPIO / TRACED1 |
| 핀 4 | PE5 — GPIO / TRACED2 |
| 핀 5 | PE6 — GPIO / TRACED3 |
| 핀 6 | VBAT — Battery backup supply |
| 핀 7 | PC13 — GPIO / RTC |
| 핀 8 | PC14 — GPIO / OSC32_IN |
| 핀 9 | PC15 — GPIO / OSC32_OUT |
| 핀 10 | PF0 — GPIO / OSC_IN |
| 핀 11 | PF1 — GPIO / OSC_OUT |
| 핀 12 | NRST — Reset (active low) |
| 핀 13 | PC0 — GPIO / ADC12_IN10 |
| 핀 14 | PC1 — GPIO / ADC12_IN11 |
| 핀 15 | PC2 — GPIO / ADC12_IN12 |
| 핀 16 | PC3 — GPIO / ADC12_IN13 |
| 핀 17 | VDD — Digital power supply |
| 핀 18 | VSS — Digital ground |
| 핀 19 | PC4 — GPIO / ADC12_IN14 |
| 핀 20 | PC5 — GPIO / ADC12_IN15 |
일반적인 애플리케이션
STM32F405ZGT6 적합 용도: 6 애플리케이션s: Industrial Motor Control, IoT Gateway, Medical Equipment, Consumer Electronics, Audio Processing, Robotics.
Industrial Motor Control
The STM32F405ZGT6 is ideal for industrial motor control due to its advanced timers with complementary PWM outputs, dead-time generation, and high-speed ADCs. The FPU accelerates FOC algorithms, enabling efficient and precise motor control. In a typical application, the MCU generates PWM signals to drive an inverter, samples phase currents via ADCs, and executes control loops at high frequency. The 168 MHz clock ensures real-time responsiveness, while the rich peripheral set simplifies interface with encoders and sensors. Compared to lower-end MCUs, the STM32F405ZGT6 offers superior computational power and integration, reducing system cost and complexity.
추천
IoT Gateway
The STM32F405ZGT6 serves as a powerful IoT gateway, handling multiple communication protocols such as Ethernet, USB, and CAN. Its 1 MB Flash and 192 KB SRAM support complex protocol stacks like MQTT and TLS. The FPU accelerates encryption algorithms, while the Ethernet MAC enables direct connection to LAN. In a typical gateway, the MCU aggregates data from sensors via UART/SPI/I2C, processes it, and forwards to the cloud via Ethernet or Wi-Fi (through external module). The high clock speed ensures smooth multitasking, and the low power modes help reduce energy consumption. Compared to simpler MCUs, the STM32F405ZGT6 provides the performance headroom needed for future firmware updates and additional features.
추천
Medical Equipment
In medical equipment such as patient monitors and diagnostic devices, the STM32F405ZGT6 provides reliable real-time processing and precise analog measurement. Its 12-bit ADCs with up to 2.4 MSPS capture biosignals accurately, while the FPU handles digital filtering and analysis. The device's wide operating temperature range and robust design ensure reliability in clinical environments. In a typical application, the MCU acquires ECG or SpO2 signals, processes them, and displays results on an LCD. The cryptographic acceleration (in some variants) can secure patient data. Compared to general-purpose MCUs, the STM32F405ZGT6 offers the performance and integration needed for advanced medical devices.
추천
Consumer Electronics
The STM32F405ZGT6 powers a wide range of consumer electronics, from smart home devices to audio equipment. Its high clock speed and FPU enable real-time audio processing, while the USB OTG interface supports connectivity to smartphones and PCs. The device's low power modes extend battery life in portable devices. In a typical smart speaker, the MCU handles audio codec, voice recognition, and network connectivity. The rich peripheral set simplifies integration with sensors, displays, and wireless modules. Compared to lower-cost MCUs, the STM32F405ZGT6 offers superior performance and scalability, making it a future-proof choice for consumer products.
추천
Audio Processing
The STM32F405ZGT6 is well-suited for audio processing applications such as effects processors, mixers, and active speakers. Its FPU accelerates DSP algorithms like FIR filters, FFT, and audio effects. The device's high-speed ADCs and DACs enable high-fidelity audio capture and playback. In a typical audio processor, the MCU receives digital audio via I2S, processes it in real-time, and outputs the result. The 168 MHz clock ensures low latency, while the large SRAM buffers audio streams. Compared to dedicated DSPs, the STM32F405ZGT6 offers a more integrated solution with a wide range of peripherals, reducing system cost and complexity.
추천
Robotics
The STM32F405ZGT6 is a popular choice for robotics applications, providing the computational power for control algorithms, sensor fusion, and communication. Its advanced timers generate precise PWM for servo and motor control, while the ADCs read position and current sensors. The FPU accelerates kinematics and dynamics calculations. In a typical robot, the MCU coordinates multiple actuators, processes sensor data, and communicates with a central computer. The device's rich peripheral set supports various interfaces like CAN, UART, and SPI. Compared to simpler MCUs, the STM32F405ZGT6 offers the performance and integration needed for complex robotic systems.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32F405ZGT6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32F407ZGT6 | STM32F415ZGT6 | STM32F417ZGT6 |
|---|---|---|---|---|
| Package | LQFP144 | LQFP144 | LQFP144 | LQFP144 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F |
| Max Clock Frequency | 168 MHz | 168 MHz | 168 MHz | 168 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 192 KB | 192 KB | 192 KB | 192 KB |
| Cryptographic Acceleration | No | Yes (AES, DES, 3DES) | Yes (AES, DES, 3DES) | Yes (AES, DES, 3DES) |
| Ethernet MAC | Yes | Yes | Yes | Yes |
주요 차별점
- Higher clock speed and FPU (vs STM32F103ZET6)
- Larger memory (vs STM32F103ZET6)
- Advanced peripherals (vs STM32F103ZET6)
설계 노트
Decouple each VDD pin with a 100nF ceramic capacitor placed as close as possible to the pin. Add a 4.7uF bulk capacitor on the main supply. Connect VDDA to a clean analog supply through a ferrite bead and add a 1uF capacitor to VSSA. Ensure VREF+ is filtered with a 1uF capacitor for accurate ADC conversions.
For the LQFP144 package, use a 4-layer PCB with dedicated power and ground planes. Keep high-speed signals (Ethernet, USB) impedance-controlled and routed over a solid ground plane. Place the crystal oscillator close to the OSC_IN/OSC_OUT pins with short traces and a ground guard ring to minimize noise.
Ensure the BOOT0 pin is configured correctly to boot from Flash (pull-down for main Flash). The NRST pin requires a 100nF capacitor to ground and a 10k pull-up resistor. Do not leave unused I/O pins floating; configure them as outputs or enable internal pull-ups to avoid excessive current consumption.
규정 준수 정보
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified; for automotive, consider STM32F405ZGT7 with extended temperature range.
