ADM242AR vs ADM485ARZ Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci ADM242AR disebabkan oleh Analog Devices dan ADM485ARZ disebabkan oleh Analog Devices. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AktifPengandingan Spesifikasi
| Parametr | ADM242AR | ADM485ARZ |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | CMOS RS-232 transceiver | — |
| Driver Count | 2 | — |
| Receiver Count | 2 | — |
| Maximum Data Rate | 200 kbps | — |
| Tegangan Pemberi Arus | 4.5 V to 5.5 V | 5 V (single supply) |
| Nominal Supply | 5 V | — |
| External Charge-Pump Capacitor | 0.1 µF | — |
| Kemasan | SOIC-18 | SOIC-8 (SO-8) / SO-8 |
| Jenis Pemasangan | Surface mount | Surface Mount |
| Suhu Operasi | -40°C to +85°C | — |
| Driver and Receiver Configuration | 2/2 full RS-232 transceiver | — |
| Logic Compatibility | CMOS RS-232 | — |
| Charge-Pump Architecture | On-chip charge pump | — |
| RS-232 Level Generation | Bipolar levels generated from 5 V supply | — |
| Supply Type | Single supply | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Kadar Data | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| Gambaran Suhu Operasi | — | -40 C to +85 C |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| Aras MSL | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |