EPC21LC20 vs EPC22LC20 Pengandingan

Pengandingan Sisi Kiri Sisi Kanan Terperinci EPC21LC20 disebabkan oleh Intel dan EPC22LC20 disebabkan oleh Intel. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.

Pengandingan Spesifikasi

Parametr EPC21LC20 EPC22LC20
Merek Intel Intel
Kategori Memory ICs FPGA & CPLD
Status Lingkungan Hidup Aktif Obsolete
Jenis Ingatan Serial Configuration PROM (Flash-based, in-system programmable) —
Density 2 Mb (2,097,152 bits) —
Configuration Mode Supported Serial (PS) for Altera SRAM-based LUT FPGAs —
Maximum DCLK Frequency 10 MHz —
Access Time approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] —
Programming Interface IEEE 1149.1 (JTAG) JTAG (IEEE 1149.1 / IEEE 1532)
Program/Erase Endurance 100 cycles minimum [DATA_NEEDED: confirm from datasheet] —
Operating Voltage (VCC) 3.0 V to 3.6 V (3.3 V typical) —
Standby Current [DATA_NEEDED: ICCSB value] —
Active Read Current [DATA_NEEDED: ICC active current] —
Operating Temperature (commercial) 0 °C to +70 °C (LC suffix) —
Operating Temperature (industrial) [DATA_NEEDED: -40 to +85 °C for LI variant] —
Kemasan / Case 20-pin PLCC (J-lead, JEDEC MS-018) 20-LCC (J-Lead, 9 x 9 mm)
Jenis Pemasangan Surface Mount (PLCC socket or solder) Surface Mount (PLCC socket compatible)
Aras MSL [DATA_NEEDED: confirm moisture sensitivity level] —
Status RoHS [DATA_NEEDED: confirm from Altera product page] —
Lead-Free (Pb-free) [DATA_NEEDED: confirm] —
Compatible FPGA Families ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) —
JTAG Boundary-Scan Compliant Yes (IEEE Std 1149.1) —
Data Width 1 bit (serial DATA output) —
Fungsi — In-System Programmable Configuration PROM for SRAM-based FPGAs
Saiz Ingatan — 1.6 Mbit
Programmable Type — In System Programmable (IEEE 1532 / Jam STAPL)
Supply Voltage - Low Range — 3.0 V to 3.6 V
Supply Voltage - High Range — 4.75 V to 5.25 V
Supported FPGA Families — ACEX 1K, APEX II, APEX 20K, FLEX 10K
Configuration Interface — Altera serial configuration (DCLK / DATA0 / nSTATUS / CONF_DONE)
Packaging — Tube
Suhu Operasi — 0 C to +70 C (commercial)
Minimum DC Input Voltage — -0.3 V
Input Overshoot Tolerance — 7.0 V for <100 mA, <20 ns no-load
Input Undershoot Tolerance — -2.0 V for <100 mA, <20 ns no-load
Lead-Free / RoHS — [DATA_NEEDED: lead-free status not in verified data]

Laporan Datasheet & Sumber

Lihat Semua Produk Buat BOQ Minta Bao Harga