EPC21LC20 vs EPC22LC20 So sánh

So sánh chi tiết song song của EPC21LC20 bằng Intel và EPC22LC20 bằng Intel. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

So sánh thông số kỹ thuật

Tham số EPC21LC20 EPC22LC20
Thương hiệu Intel Intel
Danh mục Memory ICs FPGA & CPLD
Trạng thái vòng đời Hoạt động Obsolete
Kiểu bộ nhớ Serial Configuration PROM (Flash-based, in-system programmable) —
Density 2 Mb (2,097,152 bits) —
Configuration Mode Supported Serial (PS) for Altera SRAM-based LUT FPGAs —
Maximum DCLK Frequency 10 MHz —
Access Time approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] —
Programming Interface IEEE 1149.1 (JTAG) JTAG (IEEE 1149.1 / IEEE 1532)
Program/Erase Endurance 100 cycles minimum [DATA_NEEDED: confirm from datasheet] —
Operating Voltage (VCC) 3.0 V to 3.6 V (3.3 V typical) —
Standby Current [DATA_NEEDED: ICCSB value] —
Active Read Current [DATA_NEEDED: ICC active current] —
Operating Temperature (commercial) 0 °C to +70 °C (LC suffix) —
Operating Temperature (industrial) [DATA_NEEDED: -40 to +85 °C for LI variant] —
Hộp / Vỏ 20-pin PLCC (J-lead, JEDEC MS-018) 20-LCC (J-Lead, 9 x 9 mm)
Kiểu lắp đặt Surface Mount (PLCC socket or solder) Surface Mount (PLCC socket compatible)
Cấp MSL [DATA_NEEDED: confirm moisture sensitivity level] —
Trạng thái RoHS [DATA_NEEDED: confirm from Altera product page] —
Lead-Free (Pb-free) [DATA_NEEDED: confirm] —
Compatible FPGA Families ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) —
JTAG Boundary-Scan Compliant Yes (IEEE Std 1149.1) —
Data Width 1 bit (serial DATA output) —
Chức năng — In-System Programmable Configuration PROM for SRAM-based FPGAs
Kích thước bộ nhớ — 1.6 Mbit
Programmable Type — In System Programmable (IEEE 1532 / Jam STAPL)
Supply Voltage - Low Range — 3.0 V to 3.6 V
Supply Voltage - High Range — 4.75 V to 5.25 V
Supported FPGA Families — ACEX 1K, APEX II, APEX 20K, FLEX 10K
Configuration Interface — Altera serial configuration (DCLK / DATA0 / nSTATUS / CONF_DONE)
Packaging — Tube
Nhiệt độ hoạt động — 0 C to +70 C (commercial)
Minimum DC Input Voltage — -0.3 V
Input Overshoot Tolerance — 7.0 V for <100 mA, <20 ns no-load
Input Undershoot Tolerance — -2.0 V for <100 mA, <20 ns no-load
Lead-Free / RoHS — [DATA_NEEDED: lead-free status not in verified data]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá