EPC21LC20 vs EPC22LC20 השוואה

השוואה מפורטת זה לצד זה של EPC21LC20 מאת Intel ו EPC22LC20 מאת Intel. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.

השוואת מפרטים

פרמטר EPC21LC20 EPC22LC20
מותג Intel Intel
קטגוריה Memory ICs FPGA & CPLD
סטטוס מחזור חיים פעיל Obsolete
סוג זיכרון Serial Configuration PROM (Flash-based, in-system programmable) —
Density 2 Mb (2,097,152 bits) —
Configuration Mode Supported Serial (PS) for Altera SRAM-based LUT FPGAs —
Maximum DCLK Frequency 10 MHz —
Access Time approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] —
Programming Interface IEEE 1149.1 (JTAG) JTAG (IEEE 1149.1 / IEEE 1532)
Program/Erase Endurance 100 cycles minimum [DATA_NEEDED: confirm from datasheet] —
Operating Voltage (VCC) 3.0 V to 3.6 V (3.3 V typical) —
Standby Current [DATA_NEEDED: ICCSB value] —
Active Read Current [DATA_NEEDED: ICC active current] —
Operating Temperature (commercial) 0 °C to +70 °C (LC suffix) —
Operating Temperature (industrial) [DATA_NEEDED: -40 to +85 °C for LI variant] —
מארז / Case 20-pin PLCC (J-lead, JEDEC MS-018) 20-LCC (J-Lead, 9 x 9 mm)
סוג הרכבה Surface Mount (PLCC socket or solder) Surface Mount (PLCC socket compatible)
רמת MSL [DATA_NEEDED: confirm moisture sensitivity level] —
סטטוס RoHS [DATA_NEEDED: confirm from Altera product page] —
Lead-Free (Pb-free) [DATA_NEEDED: confirm] —
Compatible FPGA Families ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) —
JTAG Boundary-Scan Compliant Yes (IEEE Std 1149.1) —
Data Width 1 bit (serial DATA output) —
פונקציה — In-System Programmable Configuration PROM for SRAM-based FPGAs
גודל זיכרון — 1.6 Mbit
Programmable Type — In System Programmable (IEEE 1532 / Jam STAPL)
Supply Voltage - Low Range — 3.0 V to 3.6 V
Supply Voltage - High Range — 4.75 V to 5.25 V
Supported FPGA Families — ACEX 1K, APEX II, APEX 20K, FLEX 10K
Configuration Interface — Altera serial configuration (DCLK / DATA0 / nSTATUS / CONF_DONE)
Packaging — Tube
טמפרטורת פעולה — 0 C to +70 C (commercial)
Minimum DC Input Voltage — -0.3 V
Input Overshoot Tolerance — 7.0 V for <100 mA, <20 ns no-load
Input Undershoot Tolerance — -2.0 V for <100 mA, <20 ns no-load
Lead-Free / RoHS — [DATA_NEEDED: lead-free status not in verified data]

Datasheets ומשאבים

עיין בכל המוצרים צור BOM בקשת הצעת מחיר