EPC21LC20 vs EPC22LC20 Karşılaştırma
Ayrıntılı yan yana karşılaştırma EPC21LC20 tarafından Intel ve EPC22LC20 tarafından IntelAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | EPC21LC20 | EPC22LC20 |
|---|---|---|
| Marka | Intel | Intel |
| Kategori | Memory ICs | FPGA & CPLD |
| Yaşam Döngüsü Durumu | Aktif | Obsolete |
| Bellek Türü | Serial Configuration PROM (Flash-based, in-system programmable) | — |
| Density | 2 Mb (2,097,152 bits) | — |
| Configuration Mode Supported | Serial (PS) for Altera SRAM-based LUT FPGAs | — |
| Maximum DCLK Frequency | 10 MHz | — |
| Access Time | approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] | — |
| Programming Interface | IEEE 1149.1 (JTAG) | JTAG (IEEE 1149.1 / IEEE 1532) |
| Program/Erase Endurance | 100 cycles minimum [DATA_NEEDED: confirm from datasheet] | — |
| Operating Voltage (VCC) | 3.0 V to 3.6 V (3.3 V typical) | — |
| Standby Current | [DATA_NEEDED: ICCSB value] | — |
| Active Read Current | [DATA_NEEDED: ICC active current] | — |
| Operating Temperature (commercial) | 0 °C to +70 °C (LC suffix) | — |
| Operating Temperature (industrial) | [DATA_NEEDED: -40 to +85 °C for LI variant] | — |
| Paket / Kas | 20-pin PLCC (J-lead, JEDEC MS-018) | 20-LCC (J-Lead, 9 x 9 mm) |
| Montaj Türü | Surface Mount (PLCC socket or solder) | Surface Mount (PLCC socket compatible) |
| MSL Seviyesi | [DATA_NEEDED: confirm moisture sensitivity level] | — |
| RoHS Durumu | [DATA_NEEDED: confirm from Altera product page] | — |
| Lead-Free (Pb-free) | [DATA_NEEDED: confirm] | — |
| Compatible FPGA Families | ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) | — |
| JTAG Boundary-Scan Compliant | Yes (IEEE Std 1149.1) | — |
| Data Width | 1 bit (serial DATA output) | — |
| Fonksiyon | — | In-System Programmable Configuration PROM for SRAM-based FPGAs |
| Bellek Boyutu | — | 1.6 Mbit |
| Programmable Type | — | In System Programmable (IEEE 1532 / Jam STAPL) |
| Supply Voltage - Low Range | — | 3.0 V to 3.6 V |
| Supply Voltage - High Range | — | 4.75 V to 5.25 V |
| Supported FPGA Families | — | ACEX 1K, APEX II, APEX 20K, FLEX 10K |
| Configuration Interface | — | Altera serial configuration (DCLK / DATA0 / nSTATUS / CONF_DONE) |
| Packaging | — | Tube |
| İşletim Sıcaklığı | — | 0 C to +70 C (commercial) |
| Minimum DC Input Voltage | — | -0.3 V |
| Input Overshoot Tolerance | — | 7.0 V for <100 mA, <20 ns no-load |
| Input Undershoot Tolerance | — | -2.0 V for <100 mA, <20 ns no-load |
| Lead-Free / RoHS | — | [DATA_NEEDED: lead-free status not in verified data] |