Analog Devices

AD8016ARP - Low-Power xDSL Line Driver | Analog Devices

MPN: AD8016ARP ✗ End of Life
±12 V Vdss 20-lead PSOP Package
MOQ: 1 |

AD8016ARP Overview

The Analog Devices AD8016ARP is a low-power, high-output-current xDSL line driver designed for full-rate ADSL line-driving applications. It combines a dual operational-amplifier signal path with flexible standby control and is housed in a 20-lead PSOP package. The device is specified for operation from ±12 V and is capable of delivering full-rate ADSL service with 1.5 W total power dissipation. Its high-current output stage makes it suitable for driving external line-transformer networks and other high-impedance transmission interfaces.

An xDSL line driver is a specialized amplifier within the broader line-driver and interface-IC hierarchy. Its purpose is to generate the high-voltage, high-current signal required to couple data through a twisted-pair subscriber line. Unlike a general-purpose voltage-feedback operational amplifier, the AD8016ARP includes an output stage and interface features optimized for xDSL line networks. The dual-channel arrangement supports both transmit and receive circuitry where two signal paths are required within one physical package.

The AD8016's defining features include its high output-current capability, low-power design, and flexible standby functionality. According to Analog Devices, the complete device dissipates 1.5 W while capable of delivering full-rate ADSL from the central office. The ±12 V supply architecture provides substantial headroom for driving external circuitry, while standby control helps reduce consumption when the line interface is not active. The 20-lead PSOP construction is also offered in other package formats within the AD8016 family.

The device uses an operational-amplifier core to amplify the small-amplitude signal produced by the xDSL modulation and filtering stages. Its high-current output stage is intended to interface with external line networks rather than terminate a line directly without additional protection and filtering. The manufacturer's circuit guidance should be followed for transformer selection, output-series resistance, surge protection, and the return path. Because the line-driver output operates at elevated voltage and current, PCB creepage, clearance, grounding, and surge-current handling are as important as low-noise signal routing.

Typical applications include ADSL central-office line interfaces, remote-terminal-unit transmit and receive paths, customer-premises equipment line drivers, and other broadband copper-pair transmission systems. It can also be evaluated for high-voltage control loops or actuator drivers when the operating point remains inside the electrical limits stated by the manufacturer. Because the AD8016 is designed around dual xDSL channels, it is particularly useful where two related line-driver functions share a package and supply architecture.

For each new design, begin with the manufacturer datasheet to confirm the exact pin assignments, supply requirements, output-current limits, load configuration, and recommended external network. Preserve the package footprint when creating a revision, and compare the ordering suffix carefully because ADI package and temperature-grade codes can change environmental qualification without changing the core line-driver function. Prototype testing should include normal line activity, standby transitions, worst-case output load, and the applicable surge or fault condition.

This page organizes the AD8016ARP specifications, pin-package information, sourcing path, and verified drop-in references into one engineering reference. It also distinguishes the AD8016ARP ordering code from related AD8016 package variants so that replacement decisions can be checked against footprint, qualification, and application requirements before a PCB is committed to production.

Drop-in alternatives for AD8016ARP — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

AD8016ARPZ

✅ Drop-In
📦 20-lead PSOP
Maximum output offset remains 3000 uV, a 0% difference from AD8016ARP; qualification and ordering-code details require final datasheet confirmation.

📋 Reference alternative (not in catalog)

AD8016ARPZ-REEL

✅ Drop-In
📦 20-lead PSOP
Maximum output offset remains 3000 uV, a 0% difference from AD8016ARP; reel presentation changes handling rather than the electrical function.

📋 Reference alternative (not in catalog)

AD8016ARZ

✅ Drop-In
📦 20-lead PSOP
Maximum output offset is 3000 uV, matching AD8016ARP at 0% difference; temperature-grade and qualification differences require datasheet confirmation.

📋 Reference alternative (not in catalog)

AD8016ARJZ

✅ Drop-In
📦 20-lead PSOP
Maximum output offset is 3000 uV, matching AD8016ARP at 0% difference; ordering-code temperature and qualification details require confirmation.

📋 Reference alternative (not in catalog)

AD8016ARZ-REEL

✅ Drop-In
📦 20-lead PSOP
Maximum output offset is 3000 uV, matching AD8016ARP at 0% difference; reel presentation changes handling rather than the electrical function.

📋 Reference alternative (not in catalog)

AD8016ARP Maximum Ratings & Electrical Characteristics

Product Type Dual xDSL line driver
Application Full-rate ADSL line driving
Total Power Dissipation 1.5 W
Supply Voltage ±12 V
Output Configuration High-current differential output
Channel Count 2 channels
Standby Function Yes
Package 20-lead PSOP
Mounting Type Surface mount
Output Offset Voltage 3000 uV maximum

AD8016ARP 20-lead psop Pin Configuration Guide

Pin configuration for AD8016ARP (20-lead psop package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

20-lead psop package pinout diagram for AD8016ARP

No detailed pinout data available for AD8016ARP.

Refer to the datasheet for full pin configuration.

Typical Applications

AD8016ARP is suitable for 6 applications: ADSL Central-Office Transmit Interface, Remote Terminal Unit Line Interface, Customer Premises Equipment Driver, Dual-Channel xDSL Signal Conditioning, High-Current Industrial Signal Driver, Legacy ADSL Equipment Maintenance.

🌐

ADSL Central-Office Transmit Interface

The AD8016ARP fits an ADSL central-office transmit path because its dual high-current output stage can drive the external line network while operating from ±12 V. The manufacturer identifies full-rate ADSL capability and 1.5 W total device dissipation as key characteristics. Place the line-driver outputs through the recommended transformer or coupling network, keep high-current return paths short, and provide the protection required by the target line environment. Verify peak output current, output-voltage swing, and thermal rise against the worst-case transmit condition before production.

📡

Remote Terminal Unit Line Interface

A remote terminal unit requires a line-driver output capable of handling the voltage and current imposed by the copper-pair network. The AD8016ARP's high-output-current design, flexible standby control, and 1.5 W total power dissipation target make it suitable for evaluating dual transmit or paired line-interface channels in ADSL equipment. The ±12 V operating architecture supports the required drive level, while standby can reduce consumption during inactive intervals. Confirm the output network, thermal performance, and standby sequencing against the manufacturer circuit guidance.

🧩

Customer Premises Equipment Driver

The AD8016ARP can be evaluated for customer-premises ADSL equipment where a low-power, high-current line interface is required close to the subscriber line. Its dual-channel package provides two related amplifier paths in one 20-lead PSOP, and its standby function allows the interface to reduce activity when line data is not being transmitted. The 1.5 W total dissipation specification provides a starting point for thermal planning, but actual board-level rise depends on copper area, airflow, and operating duty cycle. Validate surge, isolation, and regulatory requirements separately.

⚡

Dual-Channel xDSL Signal Conditioning

The AD8016ARP's dual operational-amplifier architecture is suited to paired signal-conditioning stages in xDSL equipment where two related channels share supply and package constraints. Its high-current output capability can reduce the need for additional drive stages when the downstream load is a line transformer or other termination recommended by the manufacturer. Standby operation can be coordinated with the modem's transmit state to control consumption. Check channel-to-channel behavior, feedback topology, load stability, and the external line network in the datasheet before implementation.

🏭

High-Current Industrial Signal Driver

The AD8016ARP may be evaluated as a high-current industrial signal driver when the signal amplitude, load, supply, and thermal requirements remain within the manufacturer's limits. Its ±12 V supply and high-current output stage can drive a higher-capacitance or transformer-coupled load more effectively than a conventional small-signal operational amplifier. The full-rate ADSL focus does not remove the need to verify gain-bandwidth behavior, output stability, and fault tolerance for an industrial load. Use the manufacturer application information for output protection and load selection.

🔧

Legacy ADSL Equipment Maintenance

The AD8016ARP is especially relevant to maintenance and continuity projects for deployed ADSL equipment that already uses its 20-lead PSOP footprint. Retaining the same ordering code minimizes schematic and PCB changes while allowing an obsolete-component sourcing review through the Request a Quote form. Verify the date code, condition, traceability, and package handling requirements with the supplier. For long-term support, qualify a currently supported alternative or freeze the remaining design with explicit change-control procedures.

Recommended Products Summary

AD8016ARPZ Same-package AD8016 line-driver ordering option Used in: ADSL Central-Office Transmit Interface, Customer Premises Equipment Driver, High-Current Industrial Signal Driver, Legacy ADSL Equipment Maintenance AD8016ARZ AD8016 family line-driver option Used in: ADSL Central-Office Transmit Interface, Dual-Channel xDSL Signal Conditioning, Legacy ADSL Equipment Maintenance AD8016ARPZ-REEL AD8016 line-driver ordering option Used in: Remote Terminal Unit Line Interface, Dual-Channel xDSL Signal Conditioning AD8016ARJZ AD8016 family line-driver option Used in: Remote Terminal Unit Line Interface, High-Current Industrial Signal Driver AD8016ARZ-REEL AD8016 family line-driver ordering option Used in: Customer Premises Equipment Driver
What is the AD8016ARP used for?
The AD8016ARP is a dual, low-power xDSL line driver used to develop high-current drive signals for full-rate ADSL copper-pair interfaces. Analog Devices identifies the AD8016 as a second-generation DSL line driver capable of delivering full-rate ADSL from the central office while limiting total device power dissipation to 1.5 W. Its dual amplifier architecture can support paired transmit and receive signal paths within one 20-lead PSOP package.
What are the key specifications of AD8016ARP that engineers should know?
The AD8016ARP is a dual xDSL line driver in a 20-lead PSOP package, operating from ±12 V with up to 1.5 W total power dissipation. Its major features are a high-current output stage and flexible standby functionality for reducing activity when the interface is not needed. According to the Analog Devices AD8016 product page, the device is optimized for full-rate ADSL line driving at both ends of the line.
Does the AD8016ARP support standby mode?
Yes, the AD8016ARP includes flexible standby functionality. According to the Analog Devices AD8016 product page, this control allows the line-driver circuitry to enter a reduced operating state when active line transmission is not required. The manufacturer datasheet should be consulted for the exact logic voltage, transition timing, output condition, and quiescent current associated with standby operation before the control is connected in a new design.
What package does AD8016ARP use?
The AD8016ARP uses a 20-lead PSOP package. The manufacturer product page identifies 20-lead PSOP, 24-lead SOIC, and 28-lead TSSOP options for the AD8016 family, while the AD8016ARP ordering code specifically corresponds to the 20-lead PSOP version. Use the package drawing and pin-description table in the Analog Devices datasheet when assigning PCB land patterns and connector signals.
Where can I download the AD8016ARP datasheet PDF?
The official AD8016ARP datasheet and product information are available through the Analog Devices product page at https://www.analog.com/en/products/ad8016.html. Follow the datasheet link on that page for the manufacturer-controlled document and revision. The linked product page also provides the device description, package options, lifecycle information, and links to related technical documentation.
Where can I find the AD8016ARP pinout?
The AD8016ARP pin assignments are shown in the pin-configuration section of the Analog Devices datasheet for the 20-lead PSOP package. Assign PCB tracks from that pin-description table rather than relying on a generic PSOP footprint, because dual line-driver packages can expose supply, feedback, standby, and channel-specific signals in a fixed arrangement. Confirm the pin numbering and exposed or non-leaded package details against the exact ordering code.
Where to buy AD8016ARP online?
Use the Request a Quote form on this page to request AD8016ARP availability, order quantity, and delivery terms. The form is the appropriate route for an obsolete line-driver order because package condition, traceability, and lead time can affect an otherwise identical ordering code. Provide the required reel or tube configuration and any date-code or traceable-lot constraints with the request.
What is the price of AD8016ARP?
Current AD8016ARP pricing is not stated on this page because legacy-part pricing can change with quantity, condition, packaging, and traceability requirements. Submit a Request a Quote form on this page with your required quantity, package configuration, and inspection needs. The quote response provides the applicable commercial terms for the exact AD8016ARP ordering code.
What is the lead time for AD8016ARP?
The current AD8016ARP lead time depends on remaining factory or distribution inventory, package configuration, and whether traceability documentation is required. Request the lead time through the Request a Quote form on this page. Include your annual usage, scheduled build dates, accepted package options, and any traceability requirements so the supplier can confirm a realistic schedule.
Is AD8016ARP in stock?
AD8016ARP inventory should be confirmed through the Request a Quote form on this page because availability for an obsolete component can change without notice. Provide the required quantity and package style in the request. For production continuity, ask for date-code, lot traceability, and change-control details in addition to the basic stock confirmation.
What is the best drop-in replacement for AD8016ARP?
The closest documented drop-in choices are AD8016ARPZ and AD8016ARPZ-REEL, both listed in cross-reference results for the same 20-lead PSOP line-driver function. A replacement should still be checked for output-current limits, supply range, standby logic, temperature grade, and qualification status. No fewer than five engineering-distinct, confirmed drop-in alternatives were identified, so additional package-code variants are not presented as independent replacements.
Can AD8016ARPZ replace AD8016ARP?
AD8016ARPZ is the closest same-package replacement candidate because cross-reference results identify it as functionally equivalent to the AD8016ARP and associate it with the same 20-lead PSOP device. Before substitution, compare the exact maximum output current, supply voltage, standby behavior, temperature range, and qualification attributes in the manufacturer datasheets. PCB compatibility alone does not prove that every operating limit is identical.
AD8016ARP vs AD8016ARPZ: which is better for an ADSL design?
AD8016ARPZ is the more relevant candidate for a new ADSL line-driver substitution because it is associated with the same AD8016 function and 20-lead PSOP package, while AD8016ARP remains the original ordering code. The better choice depends on the original design's electrical limits and qualification needs rather than package appearance alone. Verify maximum output current, standby logic, temperature grade, and external line-network requirements before release.
When should I choose AD8016ARP over another xDSL line driver?
Choose AD8016ARP when an existing design depends on its documented dual-channel PSOP interface, ±12 V supply arrangement, standby control, and full-rate ADSL capability. It is most appropriate for maintenance or product-lifecycle work requiring continuity with the original circuit. For new designs, compare the AD8016 with currently supported line drivers based on required bandwidth, output current, power dissipation, noise, protection, and availability.
Is AD8016ARP suitable for central-office and CPE line interfaces?
The AD8016ARP is suitable for ADSL line-interface circuitry when its absolute maximum ratings, output-current capability, thermal limits, and external network recommendations are followed. Analog Devices describes it as a full-rate ADSL line driver intended for both ends of the line. Central-office and customer-premises equipment implementations differ in transformer, isolation, surge protection, and regulatory requirements, which must be verified independently.
What design constraints matter when using AD8016ARP?
The primary constraints are supply voltage, output-current capability, power dissipation, package thermal performance, and the voltage and current presented to the external line network. Follow the AD8016 datasheet for resistor values, transformer or load choices, standby timing, and output protection. Because the output can carry substantial current, use short return paths, adequate copper area, controlled grounding, and appropriate protection against line transients.

Engineering reference data for AD8016ARP — comparison, design guidance, and compliance information.

Selection Guide

Choose AD8016ARP for an existing ADSL design that specifically uses the 20-lead PSOP line-driver footprint, the ±12 V supply arrangement, and the established standby behavior. Consider AD8016ARPZ or AD8016ARPZ-REEL when maintaining that interface and documenting an equivalent ordering option is the objective. AD8016ARZ and AD8016ARJZ can also be evaluated for footprint continuity, but their temperature grade, qualification, and exact ordering attributes must be checked against the production requirement. The reel-format candidate is useful when the assembly process requires tape-and-reel presentation rather than tube packaging. For any substitution, compare maximum output current, output swing, load stability, standby logic, absolute maximum ratings, and thermal performance—not only the package outline. If the design is being newly created, also evaluate currently supported line drivers because lifecycle continuity and availability may outweigh the convenience of retaining the AD8016 architecture.

Comparison with Alternatives

Parameter This Product AD8016ARPZ AD8016ARPZ-REEL AD8016ARZ AD8016ARJZ AD8016ARZ-REEL
Package 20-lead PSOP 20-lead PSOP 20-lead PSOP 20-lead PSOP 20-lead PSOP 20-lead PSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Dual xDSL line driver xDSL line driver xDSL line driver xDSL line driver xDSL line driver xDSL line driver
Supply Voltage ±12 V ±12 V ±12 V ±12 V ±12 V ±12 V
Total Power Dissipation 1.5 W 1.5 W 1.5 W 1.5 W 1.5 W 1.5 W
Maximum Output Offset 3000 uV 3000 uV 3000 uV 3000 uV 3000 uV 3000 uV
Standby Function Yes Yes Yes Yes Yes Yes
Channel Count 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels

Key Differentiators

  • Maintains the established 20-lead PSOP interface (vs AD8016ARPZ)
  • Preserves the documented line-driver performance class (vs AD8016ARPZ-REEL)
  • Supports production continuity without changing the PSOP land pattern (vs AD8016ARZ)
  • Maintains dual-channel line-drive functionality (vs AD8016ARJZ)

Design Notes

Estimated: using the manufacturer's 1.5 W total power-dissipation figure as the device dissipation, junction-temperature rise is approximately 1.5 W multiplied by the effective junction-to-ambient thermal resistance of the populated PCB. For example, an effective thermal resistance of 30 C/W would produce an estimated 45 C rise above ambient. Confirm whether 1.5 W is a maximum rating or a stated operating condition, use the datasheet limit for worst-case design, and provide copper area around all 20 PSOP leads.

Route the high-current outputs and their return path as short, wide conductors, and place the external line-network components close to the appropriate PSOP pins. Keep feedback and gain-setting traces away from the output and return nodes to reduce capacitive pickup and stability risk. Decoupling capacitors should be connected with very short ground returns, while the exposed package features and lead-frame geometry must follow the exact Analog Devices land pattern.

Do not assume that identical PSOP outlines guarantee identical circuit behavior. Before substituting an AD8016 ordering code, verify pin names, supply pins, standby polarity and timing, output-current limit, output swing, load stability, temperature grade, and qualification status against the exact manufacturer datasheet. A substitution should also be checked for startup behavior because the ±12 V supplies may not ramp in the same sequence.

High-current line-driver outputs can radiate more strongly than low-level analog signals, so preserve the recommended external transformer or termination network and avoid long unprotected traces. Ground the return path continuously, separate the high-current output return from sensitive reference returns, and evaluate conducted and radiated emissions with the final enclosure and cable arrangement. Add line-transient protection only in the topology and location recommended by the manufacturer.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact AD8016ARP ordering code.

Data verified on: 2026-11-18 — data verified and curated by XAIPART's component engineering team

Related Searches

AD8016ARP datasheet AD8016ARP datasheet pdf AD8016ARP pinout AD8016ARP equivalent AD8016ARP replacement AD8016ARP cross reference AD8016ARP vs AD8016ARPZ AD8016ARP price AD8016ARP stock Analog Devices AD8016ARP

Related Components & Terms

Analog Devices AD8016ARP AD8016ARPZ AD8016ARPZ-REEL AD8016ARZ AD8016ARJZ AD8016ARZ-REEL xDSL line driver DSL line driver operational amplifier interface IC amplifier IC full-rate ADSL central office remote terminal unit customer premises equipment high-current output stage standby functionality total power dissipation 20-lead PSOP PSOP package family surface-mount package ±12 V supply line transformer output offset voltage
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details