Microchip Technology

ATTINY841-MMH - 16MHz 8KB AVR MCU | Microchip Technology

MPN: ATTINY841-MMH ✓ Active
VQFN-20 (3 x 3 mm) Package 16 MHz Speed 8 KB (8K x 8) Memory
MOQ: 1 |

ATTINY841-MMH Overview

Microchip Technology ATTINY841-MMH is an 8-bit AVR embedded microcontroller with a 16 MHz maximum clock, 8 KB of flash program memory and a 20-VQFN surface-mount package measuring 3 x 3 mm. The device is part of the ATtiny841 family and combines compact digital control, embedded data storage and analog measurement capabilities in a space-efficient package.

A microcontroller is a programmable semiconductor that integrates a processor core, memory and peripheral circuits on one die. Within the product hierarchy, the ATTINY841-MMH is an AVR embedded MCU, part of the TinyAVR family, and belongs to the broader 8-bit microcontroller and embedded-controller category. Its compact footprint makes it particularly suitable for small control modules, sensor nodes and compact consumer equipment where every board area matters.

Key features include 8 KB of flash memory for firmware, a 16 MHz operating clock and a 20-pin VQFN package. The ATtiny841 family also supports integrated analog-to-digital conversion, analog comparison and port pin-change interrupt functions. These features allow a design to replace discrete sensing and control circuitry, reducing component count while retaining deterministic firmware-based behavior. The manufacturer lists the ATtiny841 family as in production.

The ATTINY841-MMH uses Microchip's AVR architecture and combines program memory, data EEPROM and SRAM with configurable I/O ports. Port pins support digital input and output as well as alternate functions including analog comparator and ADC channels. The family's 16 MHz operating point provides a practical balance between processing throughput, power consumption and clock design simplicity for embedded control tasks.

Typical applications include compact industrial sensor modules, building and appliance control boards, battery-powered IoT devices, LED lighting controllers and small motor-control subsystems. For motor or relay outputs, designers should account for the load transients and supply requirements of the external driver rather than driving the output directly from the MCU.

A critical layout consideration is the exposed thermal pad on the 20-VQFN package. It must be connected to the intended ground plane and soldered according to the manufacturer's land-pattern and reflow guidance. Place decoupling capacitors close to the supply pins, preserve the recommended clock layout, and route sensitive analog inputs away from fast-switching nodes.

This page combines the manufacturer's device status and datasheet information with practical selection guidance, verified package details, programming references and drop-in alternatives for engineers evaluating the ATTINY841-MMH.

Drop-in alternatives for ATTINY841-MMH — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

ATTINY84A-MMH

✅ Drop-In
📦 VQFN-20 (3 x 3 mm)
Same 20-pin VQFN package class; ATTINY84A has different clock, memory-map and peripheral characteristics requiring firmware and configuration review

📋 Reference alternative (not in catalog)

ATTINY441-MMH

✅ Drop-In ⚠️ Specs Unverified
📦 VQFN-20 (3 x 3 mm)
Same 20-pin VQFN package and closely related pin organization; 6 KB flash versus 8 KB and 12 MHz versus 16 MHz

📋 Reference alternative (not in catalog)

ATTINY841-MMH Maximum Ratings & Electrical Characteristics

Product Type 8-bit AVR embedded microcontroller
Architecture AVR
Family ATtiny841
Maximum Clock Frequency 16 MHz
Flash Memory 8 KB (8K x 8)
ADC Integrated analog-to-digital converter
Analog Comparator Integrated analog comparator
Port Pin-Change Interrupts Supported
Number of Pins 20 pins
Package VQFN-20 (3 x 3 mm)
Mounting Type Surface mount
Programmable I/O Port 8-bit port with pull-up resistors and alternate pin functions
Programming Interface MPLAB PICkit 5 compatible programming and debugging
Lifecycle Status In production

ATTINY841-MMH vqfn-20 (3 x 3 mm) Pin Configuration Guide

Pin configuration for ATTINY841-MMH (vqfn-20 (3 x 3 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

vqfn-20 (3 x 3 mm) package pinout diagram for ATTINY841-MMH

No detailed pinout data available for ATTINY841-MMH.

Refer to the datasheet for full pin configuration.

Typical Applications

ATTINY841-MMH is suitable for 6 applications: Compact Industrial Sensor Nodes, Battery-Powered IoT Devices, LED Lighting Control, Appliance Control Boards, Small Motor Control Subsystems, Programmable Logic and Timing Modules.

🏭

Compact Industrial Sensor Nodes

The ATTINY841-MMH fits compact industrial sensing modules because its 8 KB flash stores control firmware while the integrated ADC and analog comparator support direct sensor conditioning and threshold decisions. Its 16 MHz clock provides additional timing headroom for sampling, filtering and communication tasks. The 20-VQFN, 3 x 3 mm package also reduces board footprint in space-constrained sensor assemblies. Place the MCU close to the sensor interface, keep analog traces away from switching nodes and validate the ADC reference and grounding strategy against the required measurement accuracy.

🧩

Battery-Powered IoT Devices

The ATTINY841-MMH is appropriate for small battery-powered IoT devices that require local sensing, state-machine control and periodic communications. The 8 KB flash capacity accommodates embedded firmware, and the 16 MHz operating speed supports responsive event handling without the overhead of a larger MCU. Its small VQFN footprint leaves board area for the radio, power conversion and energy-storage components. The design should use the low-power modes described in the family datasheet, disable unused peripherals and measure average current across sleep, wake and radio-transmit intervals.

💡

LED Lighting Control

The ATTINY841-MMH can implement compact LED lighting control with dimming sequences, current feedback, fault handling and local button or sensor input. Its integrated analog functions allow the controller to monitor a representative LED supply or current-sense signal, while the 16 MHz clock supports timely PWM updates. The 3 x 3 mm VQFN package is useful in dense luminaires and driver boards. Keep high-current LED paths separate from the MCU and analog ground, provide local bulk and high-frequency decoupling, and use suitable transistor or LED-driver circuitry instead of driving the load directly.

🔧

Appliance Control Boards

The ATTINY841-MMH suits compact appliance controllers where a dedicated MCU must coordinate buttons, relays, sensors and timing functions. Its 8 KB flash can hold compact control firmware, and the ADC and analog comparator support input monitoring without additional discrete logic. The 20-VQFN package reduces board area in space-constrained control assemblies. For mains-adjacent or relay-driven equipment, maintain strict separation between low-voltage control circuitry and switching domains. Confirm relay driver ratings, flyback protection, creepage and clearance in accordance with the complete appliance safety design.

⚡

Small Motor Control Subsystems

The ATTINY841-MMH can control small brushed-motor or actuator subsystems where speed, position, current or limit-switch information must be processed locally. The 16 MHz clock supports rapid control updates, and the ADC and analog comparator can support feedback and protection functions. The compact 3 x 3 mm VQFN package fits beneath mechanical assemblies where larger controllers are impractical. The MCU should supervise, not carry, motor current. Use an appropriately rated driver, include flyback or other required protection, isolate noisy motor paths and validate stall current, thermal rise and electromagnetic interference before production release.

🔧

Programmable Logic and Timing Modules

The ATTINY841-MMH can implement compact programmable timers, sequence controllers and logic modules where multiple digital inputs must trigger coordinated outputs. Its 8-bit AVR architecture provides straightforward firmware-based control, while the 16 MHz clock and configurable port interrupts support responsive event handling. The 20-VQFN package enables dense controller placement without requiring a through-hole footprint. Define pin multiplexing carefully, debounce mechanical inputs in firmware or hardware, provide stable clock and reset paths, and use the exposed-pad land pattern required for reliable assembly and thermal performance.

What is the ATTINY841-MMH?
The ATTINY841-MMH is an 8-bit AVR embedded microcontroller from Microchip Technology with a 16 MHz maximum clock, 8 KB of flash program memory and a 20-VQFN package. According to the manufacturer's Atmel-8495 family datasheet, the ATtiny841 family includes integrated analog functions and configurable port peripherals for compact embedded-control designs.
What is the operating voltage range of ATTINY841-MMH?
The ATTINY841-MMH supports the voltage range specified for the ATtiny841 family in the manufacturer's Atmel-8495 datasheet. Consult the electrical-characteristics and operating-conditions tables before selecting the supply voltage, regulator, decoupling network or external peripheral interface for the final circuit.
Where can I download the ATTINY841-MMH datasheet PDF?
The manufacturer-hosted ATTINY841 family datasheet can be downloaded from the Microchip Technology PDF link listed on this page. The document is identified as Atmel-8495 and covers the ATtiny441 and ATtiny841 devices, including architecture, memories, peripherals, electrical characteristics and package information.
Where can I find the ATTINY841 pinout?
The ATTINY841 pinout is shown in the package and pin-configuration section of the manufacturer's Atmel-8495 family datasheet. The ATTINY841-MMH uses the 20-VQFN, 3 x 3 mm package; consult the datasheet's pin-description and land-pattern diagrams when assigning signals and designing the exposed-pad connection.
How do I program an ATTINY841-MMH?
An ATTINY841-MMH can be programmed through the supported AVR programming and debugging workflow using Microchip's MPLAB tools and the compatible MPLAB PICkit 5 in-circuit debugger/programmer. The manufacturer identifies PICkit 5 support for Microchip AVR devices, including programming, debugging and production-oriented development workflows.
Is ATTINY841-MMH suitable for a compact sensor module?
The ATTINY841-MMH is suitable for compact sensor modules that need local control, firmware storage and analog measurement in a small footprint. Its 16 MHz clock, 8 KB flash memory, ADC, analog comparator and 20-VQFN package support space-constrained IoT, industrial sensing and appliance-control designs.
What can replace the ATTINY841-MMH?
A valid replacement must match the 20-VQFN footprint, pin assignments, supply limits, clock requirements and memory capacity. The ATTINY84A-MMH is a same-package candidate for designs that can accept its different clock and peripheral configuration, while ATTINY441-MMH is closer in pin organization but offers lower memory and clock resources.
Can ATTINY84A-MMH replace ATTINY841-MMH?
The ATTINY84A-MMH can be considered for a footprint-compatible redesign, but it should not be substituted without reviewing the memory map, timing, analog peripherals, clock configuration and application firmware. The manufacturer comparison data confirms both devices use 20-pin VQFN packaging, while their performance and peripheral details differ.
When should I choose ATTINY841-MMH over ATTINY441-MMH?
Choose ATTINY841-MMH when firmware size, processing headroom or a 16 MHz clock requirement exceeds the capacity of the ATTINY441-MMH. The ATTINY841-MMH provides 8 KB of flash and operates up to 16 MHz, making it the stronger choice for more demanding control logic or protocol handling.
Is ATTINY841-MMH the same as ATTINY84A-MMH?
No, the ATTINY841-MMH and ATTINY84A-MMH are related 8-bit AVR microcontrollers in the same 20-VQFN package class, but they are not identical devices. Their clock, memory organization, peripheral resources and register behavior must be checked against the application before the parts are treated as interchangeable.
What are the key specifications of ATTINY841-MMH that engineers should know?
The principal ATTINY841-MMH specifications are an 8-bit AVR core, 16 MHz maximum clock, 8 KB flash memory and a 20-VQFN package measuring 3 x 3 mm. The family also provides an ADC, analog comparator, configurable I/O ports and port pin-change interrupts, making it a compact embedded-controller platform.
Where can I buy ATTINY841-MMH online?
Use the Request a Quote form on this page to request ATTINY841-MMH availability, current commercial terms and shipment requirements. The request should state the required quantity, target package suffix, destination and production schedule so the manufacturer can identify the correct orderable configuration.
What is the price of ATTINY841-MMH?
Use the Request a Quote form on this page for the current ATTINY841-MMH commercial quotation. The form allows quantity and fulfillment requirements to be entered without embedding a static price in technical content that could become outdated.
What is the lead time for ATTINY841-MMH?
Request the current lead time through the Request a Quote form on this page. Lead time can vary with order quantity, package suffix, manufacturing schedule and shipment destination, so it should be confirmed for the exact ATTINY841-MMH configuration and production quantity.
Is ATTINY841-MMH in stock?
The manufacturer lists the ATtiny841 family as in production, while current package-specific inventory should be confirmed through the Request a Quote form on this page. State the required ATTINY841-MMH quantity, package suffix and delivery schedule to obtain an availability response for the intended build.
Does the ATTINY841-MMH require special VQFN PCB layout?
Yes, the ATTINY841-MMH requires a land pattern that accommodates its 20-VQFN package and exposed thermal pad. Follow the manufacturer's package drawing and recommended board layout, connect the exposed pad to the designated ground plane, and maintain the specified copper and soldering requirements.

Engineering reference data for ATTINY841-MMH — comparison, design guidance, and compliance information.

Selection Guide

Choose the ATTINY841-MMH when an embedded design needs a compact 8-bit AVR controller with 8 KB of flash, a 16 MHz maximum clock, integrated ADC and analog-comparison functions in a 20-VQFN package. It is particularly suitable for industrial sensor modules, small appliance controllers, programmable timers, LED-control boards and compact IoT devices. The ATTINY441-MMH offers the same general package and AVR family approach, but its 6 KB flash and 12 MHz clock provide less capacity and timing headroom. Consider the ATTINY84A-MMH when its clock, memory map, peripherals and firmware requirements are a better match, but verify all register and timing differences before substitution. For new production designs, use the exact package suffix, confirm programming support and validate the exposed-pad layout, decoupling, reset circuit and analog signal integrity against the manufacturer's datasheet.

Comparison with Alternatives

Parameter This Product ATTINY84A-MMH ATTINY441-MMH
Brand Microchip Technology Microchip Technology Microchip Technology
Package VQFN-20 (3 x 3 mm) VQFN-20 (3 x 3 mm) VQFN-20 (3 x 3 mm)
Architecture 8-bit AVR 8-bit AVR 8-bit AVR
Flash Memory 8 KB 8 KB 6 KB
ADC Integrated Integrated Integrated
Analog Comparator Integrated Integrated Integrated

Key Differentiators

  • Higher flash capacity within the related ATtiny441 package family (vs ATTINY441-MMH)
  • Higher maximum clock frequency for event handling and control loops (vs ATTINY441-MMH)
  • Family-specific combination of flash capacity, analog functions and compact packaging (vs ATTINY84A-MMH)

Design Notes

Use the 20-VQFN land pattern from the manufacturer's package drawing and connect the exposed thermal pad to the designated ground plane. The pad is a major low-inductance return path, so incomplete soldering can increase ground noise and thermal resistance. Follow the manufacturer’s land-pattern, copper, solder-mask and reflow recommendations rather than treating the package as a leadless QFN without thermal design.

Place the required bypass capacitor directly beside the supply and ground pins, with the shortest practical ground connection. Route the clock network away from ADC inputs, relay-driver nodes and other switching traces. Analog inputs should use a quiet return path, and external clock or sensitive-signal traces should avoid crossing high-current power routes to minimize coupling.

Do not treat the same-package alternatives as automatic firmware-compatible devices. Before replacing the ATTINY841-MMH, compare the pin-description table, memory sizes, clock limits, peripheral registers, interrupt vectors, fuse configuration and startup code. The ATtiny841 datasheet's application notes and the programmer's device support list should both be checked before releasing a substitute to production.

Budget the MCU supply separately from loads connected to its I/O pins. Input pins should not exceed the device's specified voltage range, and any externally powered peripheral connected to a GPIO must not back-power an unpowered MCU. Use the family datasheet's supply, reset and input-overvoltage limits when designing the power tree and choosing pull-up resistors.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The manufacturer identifies the ATtiny841 family as in production. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free and conflict-minerals declarations were not identified for the exact package suffix.

Data verified on: 2026-11-14 — data verified and curated by XAIPART's component engineering team

Related Searches

attiny841 datasheet attiny841 pinout attiny841 ssu attiny841 development board attiny841 arduino attiny841 pdf attiny841 programming ATTINY841-MMH datasheet ATTINY841-MMH pinout ATTINY841-MMH replacement ATTINY841-MMH equivalent ATTINY841-MMH VQFN-20 ATTINY841-MMH price ATTINY841-MMH stock

Related Components & Terms

Microchip Technology ATTINY841-MMH ATTINY841 ATTINY84A-MMH ATTINY441-MMH AVR architecture TinyAVR 8-bit microcontroller embedded controller semiconductor integrated circuit 8 KB flash memory 16 MHz clock analog-to-digital converter ADC analog comparator port pin-change interrupt MPLAB MPLAB PICkit 5 AVR programming VQFN-20 QFN family surface mount SMD package
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details